summaryrefslogtreecommitdiffstats
path: root/drivers/dma/imx-sdma.c
AgeCommit message (Collapse)Author
2013-11-20Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine changes from Vinod Koul: "This brings for slave dmaengine: - Change dma notification flag to DMA_COMPLETE from DMA_SUCCESS as dmaengine can only transfer and not verify validaty of dma transfers - Bunch of fixes across drivers: - cppi41 driver fixes from Daniel - 8 channel freescale dma engine support and updated bindings from Hongbo - msx-dma fixes and cleanup by Markus - DMAengine updates from Dan: - Bartlomiej and Dan finalized a rework of the dma address unmap implementation. - In the course of testing 1/ a collection of enhancements to dmatest fell out. Notably basic performance statistics, and fixed / enhanced test control through new module parameters 'run', 'wait', 'noverify', and 'verbose'. Thanks to Andriy and Linus [Walleij] for their review. - Testing the raid related corner cases of 1/ triggered bugs in the recently added 16-source operation support in the ioatdma driver. - Some minor fixes / cleanups to mv_xor and ioatdma" * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (99 commits) dma: mv_xor: Fix mis-usage of mmio 'base' and 'high_base' registers dma: mv_xor: Remove unneeded NULL address check ioat: fix ioat3_irq_reinit ioat: kill msix_single_vector support raid6test: add new corner case for ioatdma driver ioatdma: clean up sed pool kmem_cache ioatdma: fix selection of 16 vs 8 source path ioatdma: fix sed pool selection ioatdma: Fix bug in selftest after removal of DMA_MEMSET. dmatest: verbose mode dmatest: convert to dmaengine_unmap_data dmatest: add a 'wait' parameter dmatest: add basic performance metrics dmatest: add support for skipping verification and random data setup dmatest: use pseudo random numbers dmatest: support xor-only, or pq-only channels in tests dmatest: restore ability to start test at module load and init dmatest: cleanup redundant "dmatest: " prefixes dmatest: replace stored results mechanism, with uniform messages Revert "dmatest: append verify result to results" ...
2013-11-13dma: imx-sdma: Fix warnings for LPAE buildsOlof Johansson
This resolves a number of warnings such as the below when building with 64-bit dma_addr_t on arm: drivers/dma/imx-sdma.c:1092:3: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat=] ..by upcasting to u64 and using %llx. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-31ARM: 7857/1: dma: imx-sdma: setup dma maskPhilippe Retornaz
The dma mask is not configured in the current code. This was triggered by soc-dmaengine-pcm which allocate the dma buffers with the imx-sdma as device. This commit fix audio on imx31. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-25dmaengine: imx-sdma: use DMA_COMPLETE for dma completion statusVinod Koul
Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-02dma: imx-sdma: Staticize sdma_driver_data structuresFabio Estevam
Sparse report the following warnings: drivers/dma/imx-sdma.c:330:25: warning: symbol 'sdma_imx31' was not declared. Should it be static? drivers/dma/imx-sdma.c:351:25: warning: symbol 'sdma_imx25' was not declared. Should it be static? drivers/dma/imx-sdma.c:357:25: warning: symbol 'sdma_imx35' was not declared. Should it be static? drivers/dma/imx-sdma.c:375:25: warning: symbol 'sdma_imx51' was not declared. Should it be static? drivers/dma/imx-sdma.c:395:25: warning: symbol 'sdma_imx53' was not declared. Should it be static? drivers/dma/imx-sdma.c:414:25: warning: symbol 'sdma_imx6q' was not declared. Should it be static? Make the sdma_driver_data structures static. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-08-26dma: imx-sdma: Add ROM script addresses to driverSascha Hauer
This adds the ROM script addresses for i.MX25, i.MX5x and i.MX6 to the SDMA driver needed for the driver to work without additional firmware. The ROM script addresses are SoC specific and in some cases even tapeout specific. This patch adds the ROM script addresses only for SoCs which do not have a tapeout specific SDMA ROM, because currently it's unclear how this case should be handled. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-08-26dma: imx-sdma: Use struct for driver dataSascha Hauer
Use a struct type instead of an enum type for distinguishing between different versions. This makes it simpler to handle multiple differences without cluttering the code with comparisons for certain devtypes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-08-19dma: imx-sdma: remove the unused completionHuang Shijie
After the patch: "2ccaef0 dma: imx-sdma: make channel0 operations atomic", the "done" completion is not used any more. Just remove it. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-08-13dma: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-08-05imx-sdma: remove useless variableAndy Shevchenko
last_used variable is applied only once, so, let's substitute it by its value. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: imx-sdma: move to generic device tree bindingsShawn Guo
Update imx-sdma driver to adopt generic DMA device tree bindings. It calls of_dma_controller_register() with imx-sdma specific of_dma_xlate to get the generic DMA device tree helper support. The #dma-cells for imx-sdma must be 3, which includes request ID, peripheral type and priority. The existing way of requesting channel, clients directly call dma_request_channel(), still work there, and will be removed after all imx-sdma clients get converted to generic DMA device tree helper. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-04-15dma: Remove erroneous __exit and __exit_p() referencesMaxin B. John
Removing the annotation with __exit and referencing with __exit_p() present in dma driver module remove hooks. Part of the __devexit and __devexit_p() purge. Signed-off-by: Maxin B. John <maxin.john@enea.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2012-10-15dma: imx-sdma: remove unneeded mach/hardware.h inclusionShawn Guo
The inclusion of mach/hardware.h is not used in imx-sdma driver at all. Remove it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Vinod Koul <vinod.koul@intel.com>
2012-10-09Merge tag 'sound-3.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This contains pretty many small commits covering fairly large range of files in sound/ directory. Partly because of additional API support and partly because of constantly developed ASoC and ARM stuff. Some highlights: - Introduced the helper function and documentation for exposing the channel map via control API, as discussed in Plumbers; most of PCI drivers are covered, will follow more drivers later - Most of drivers have been replaced with the new PM callbacks (if the bus is supported) - HD-audio controller got the support of runtime PM and the support of D3 clock-stop. Also changing the power_save option in sysfs kicks off immediately to enable / disable the power-save mode. - Another significant code change in HD-audio is the rewrite of firmware loading code. Other than that, most of changes in HD-audio are continued cleanups and standardization for the generic auto parser and bug fixes (HBR, device-specific fixups), in addition to the support of channel-map API. - Addition of ASoC bindings for the compressed API, used by the mid-x86 drivers. - Lots of cleanups and API refreshes for ASoC codec drivers and DaVinci. - Conversion of OMAP to dmaengine. - New machine driver for Wolfson Microelectronics Bells. - New CODEC driver for Wolfson Microelectronics WM0010. - Enhancements to the ux500 and wm2000 drivers - A new driver for DA9055 and the support for regulator bypass mode." Fix up various arm soc header file reorg conflicts. * tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (339 commits) ALSA: hda - Add new codec ALC283 ALC290 support ALSA: hda - avoid unneccesary indices on "Headphone Jack" controls ALSA: hda - fix indices on boost volume on Conexant ALSA: aloop - add locking to timer access ALSA: hda - Fix hang caused by race during suspend. sound: Remove unnecessary semicolon ALSA: hda/realtek - Fix detection of ALC271X codec ALSA: hda - Add inverted internal mic quirk for Lenovo IdeaPad U310 ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event ALSA: hda - make a generic unsol event handler ASoC: codecs: Add DA9055 codec driver ASoC: eukrea-tlv320: Convert it to platform driver ALSA: ASoC: add DT bindings for CS4271 ASoC: wm_hubs: Ensure volume updates are handled during class W startup ASoC: wm5110: Adding missing volume update bits ASoC: wm5110: Add OUT3R support ASoC: wm5110: Add AEC loopback support ASoC: wm5110: Rename EPOUT to HPOUT3 ASoC: arizona: Add more clock rates ASoC: arizona: Add more DSP options for mixer input muxes ...
2012-09-22dmaengine: Pass flags via device_prep_dma_cyclic() callbackPeter Ujfalusi
Change the parameter list of device_prep_dma_cyclic() so the DMA drivers can receive the flags coming from clients. This feature can be used during audio operation to disable all audio related interrupts when the DMA_PREP_INTERRUPT is cleared from the flags. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-14ARM: imx: move platform_data definitionsArnd Bergmann
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the imx include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Sascha Hauer <kernel@pengutronix.de> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Dan Williams <djbw@fb.com> Cc: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org> Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Alan Cox <alan@linux.intel.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Liam Girdwood <lrg@ti.com> Cc: Javier Martin <javier.martin@vista-silicon.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
2012-06-07dma: imx-sdma: buf_tail should be initialize in prepare functionRichard Zhao
This fix audio underrun issue. When SNDRV_PCM_TRIGGER_STOP and SNDRV_PCM_TRIGGER_START, it calls prepare again. buf_tail should be reset to zero. So move buf_tail initialization into prepare function. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-26Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc clock driver changes from Olof Johansson: "The new clock subsystem was merged in linux-3.4 without any users, this now moves the first three platforms over to it: imx, mxs and spear. The series also contains the changes for the clock subsystem itself, since Mike preferred to have it together with the platforms that require these changes, in order to avoid interdependencies and conflicts." Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code removed in one branch, added OF support in another) and drivers/dma/imx-sdma.c (independent changes next to each other). * tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits) clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate(). clk: Provide dummy clk_unregister() SPEAr: Update defconfigs SPEAr: Add SMI NOR partition info in dts files SPEAr: Switch to common clock framework SPEAr: Call clk_prepare() before calling clk_enable SPEAr: clk: Add General Purpose Timer Synthesizer clock SPEAr: clk: Add Fractional Synthesizer clock SPEAr: clk: Add Auxiliary Synthesizer clock SPEAr: clk: Add VCO-PLL Synthesizer clock SPEAr: Add DT bindings for SPEAr's timer ARM i.MX: remove now unused clock files ARM: i.MX6: implement clocks using common clock framework ARM i.MX35: implement clocks using common clock framework ARM i.MX5: implement clocks using common clock framework ARM: Kirkwood: Replace clock gating ARM: Orion: Audio: Add clk/clkdev support ARM: Orion: PCIE: Add support for clk ARM: Orion: XOR: Add support for clk ARM: Orion: CESA: Add support for clk ...
2012-05-11dma: imx-sdma: make channel0 operations atomicRichard Zhao
device_prep_dma_cyclic may be call in audio trigger function which is atomic context, so we make it atomic too. - change channel0 lock to spinlock. - Use polling to wait for channel0 finish running. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-11dmaengine: Use dma_sg_len(sg) instead of sg->lengthLars-Peter Clausen
sg->length may or may not contain the length of the dma region to transfer, depending on the architecture - dma_sg_len(sg) always will though. For the architectures which use the drivers modified by this patch it probably is the case that sg->length contains the dma transfer length. But to be consistent and future proof change them to use dma_sg_len. To quote Russel King: sg->length is meaningless to something performing DMA. In cases where sg_dma_len(sg) and sg->length are the same storage, then there's no problem. But scatterlists _can_ (and one some architectures) do split them - especially when you have an IOMMU which can allow you to combine a scatterlist into fewer entries. So, anything using sg->length for the size of a scatterlist's DMA transfer _after_ a call to dma_map_sg() is almost certainly buggy. The patch has been generated using the following coccinelle patch: <smpl> @@ struct scatterlist *sg; expression X; @@ -sg[X].length +sg_dma_len(&sg[X]) @@ struct scatterlist *sg; @@ -sg->length +sg_dma_len(sg) </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-05-11dma: imx-sdma: keep the callbacks invoked in the taskletHuang Shijie
The current code keeps the callbacks invoked from interrupt context, this does not conform to the Documentation/dmaengine.txt. So add tasklet support to fix this issue. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-04-25dmaengine i.MX SDMA: do not depend on grouped clocksSascha Hauer
the current i.MX clock support groups together unrelated clocks to a single clock which is then used by the driver. This can't be accomplished with the generic clock framework so we instead request the individual clocks in the driver. For i.MX there are generally three different clocks: ipg: bus clock (needed to access registers) ahb: dma relevant clock, sometimes referred to as hclk in the datasheet per: bit clock, pixel clock This patch changes the driver to request the individual clocks. Currently all clk_get will get the same clock until the SoCs are converted to the generic clock framework Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-03-29Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine update from Vinod Koul: "This includes the cookie cleanup by Russell, the addition of context parameter for dmaengine APIs, more arm dmaengine driver cleanup by moving code to dmaengine, this time for imx by Javier and pl330 by Boojin along with the usual driver fixes." Fix up some fairly trivial conflicts with various other cleanups. * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (67 commits) dmaengine: imx: fix the build failure on x86_64 dmaengine: i.MX: Fix merge of cookie branch. dmaengine: i.MX: Add support for interleaved transfers. dmaengine: imx-dma: use 'dev_dbg' and 'dev_warn' for messages. dmaengine: imx-dma: remove 'imx_dmav1_baseaddr' and 'dma_clk'. dmaengine: imx-dma: remove unused arg of imxdma_sg_next. dmaengine: imx-dma: remove internal structure. dmaengine: imx-dma: remove 'resbytes' field of 'internal' structure. dmaengine: imx-dma: remove 'in_use' field of 'internal' structure. dmaengine: imx-dma: remove sg member from internal structure. dmaengine: imx-dma: remove 'imxdma_setup_sg_hw' function. dmaengine: imx-dma: remove 'imxdma_config_channel_hw' function. dmaengine: imx-dma: remove 'imxdma_setup_mem2mem_hw' function. dmaengine: imx-dma: remove dma_mode member of internal structure. dmaengine: imx-dma: remove data member from internal structure. dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c dmaengine: at_hdmac: add slave config operation dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclic dmaengine/dma_slave: introduce inline wrappers dma: imx-sdma: Treat firmware messages as warnings instead of erros ...
2012-03-21dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclicAlexandre Bounine
Add context parameter to device_prep_slave_sg() and device_prep_dma_cyclic() interfaces to allow passing client/target specific information associated with the data transfer. Modify all affected DMA engine drivers. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-21dma: imx-sdma: Treat firmware messages as warnings instead of errosFabio Estevam
As the SDMA controller can operate without an external firmware being loaded, treat the firmware related messages as warnings rather than errors. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13Merge branch 'rmk_cookie_fixes2' into nextVinod Koul
Conflicts: drivers/dma/imx-dma.c drivers/dma/pl330.c Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13dmaengine: fix for cookie changes and mergeVinod Koul
Fixed trivial issues in drivers: drivers/dma/imx-sdma.c drivers/dma/intel_mid_dma.c drivers/dma/ioat/dma_v3.c drivers/dma/iop-adma.c drivers/dma/sirf-dma.c drivers/dma/timb_dma.c Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13dmaengine: ensure all DMA engine drivers initialize their cookiesRussell King - ARM Linux
Ensure all DMA engine drivers initialize their cookies in the same way, so that they all behave in a similar fashion. This means their first issued cookie will be 2 rather than 1, and will increment to INT_MAX before returning 1 and starting over. In connection with this, Dan Williams said: > Russell King wrote: > > Secondly, some DMA engine drivers initialize the dma_chan cookie to 0, > > others to 1.  Is there a reason for this, or are these all buggy? > > I know that ioat and iop-adma expect 0 to mean "I have cleaned up this > descriptor and it is idle", and would break if zero was an in-flight > cookie value. The reserved usage of zero is an driver internal > concern, but I have no problem formalizing it as a reserved value. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> [imx-sdma.c & mxs-dma.c] Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13dmaengine: provide a common function for completing a dma descriptorRussell King - ARM Linux
Provide a common function to do the cookie mechanics for completing a DMA descriptor. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> [imx-sdma.c & mxs-dma.c] Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13dmaengine: consolidate assignment of DMA cookiesRussell King - ARM Linux
Everyone deals with assigning DMA cookies in the same way (it's part of the API so they should be), so lets consolidate the common code into a helper function to avoid this duplication. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> [imx-sdma.c & mxs-dma.c] Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13dmaengine: add private header fileRussell King - ARM Linux
Add a local private header file to contain definitions and declarations which should only be used by DMA engine drivers. We also fix linux/dmaengine.h to use LINUX_DMAENGINE_H to guard against multiple inclusion. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> [imx-sdma.c & mxs-dma.c] Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13dmaengine: move last completed cookie into generic dma_chan structureRussell King - ARM Linux
Every DMA engine implementation declares a last completed dma cookie in their private dma channel structures. This is pointless, and forces driver specific code. Move this out into the common dma_chan structure. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> [imx-sdma.c & mxs-dma.c] Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-09Revert "drivers/dma: linux/module.h included twice"Vinod Koul
This reverts commit 865d9438eb1f7670d2e88849f059db551b320887. The module.h incsuion twice has been updated tree wide hence this is not required to be merged. Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-06dma: imx-sdma: Print a message when firmare fails to be requestedFabio Estevam
Print a message when firmare fails to be requested in the case of platform data being used. While at it, distinguish between the error messages of the device tree and platform data cases. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-06dma: imx-sdma: Let the driver be probed even if no firware is foundFabio Estevam
On the device tree case the code bails out when the firmware name cannot be found or if the firmware fails to be requested. Fix this behaviour as the SDMA engine can still operate with the built-in ROM scripts. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-06drivers/dma: linux/module.h included twiceDanny Kukawka
drivers/dma/imx-dma.c and drivers/dma/imx-sdma.c included 'linux/module.h' twice, remove the duplicates. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-28includecheck: delete any duplicate instances of module.hPaul Gortmaker
Different tree maintainers picked up independently generated trivial compile fixes based on linux-next testing, resulting in some cases where a file would have got more than one addition of module.h once everything was all merged together. Delete any duplicates so includecheck isn't complaining about anything related to module.h/export.h changes. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-02i.MX SDMA: Fix burstsize settingsPhilippe Rétornaz
Commit 6584cb88 (ARM i.MX dma: Fix burstsize settings) fixed the mxcmmc driver but forgot to fix the SDMA driver to handle the correct burtsize. This make the SD card access works again with DMA on i.MX31 boards. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-02i.MX SDMA: Fix burstsize settingsPhilippe Rétornaz
Commit 6584cb88 (ARM i.MX dma: Fix burstsize settings) fixed the mxcmmc driver but forgot to fix the SDMA driver to handle the correct burtsize. This make the SD card access works again with DMA on i.MX31 boards. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-31dma/imx-sdma: convernt to use bit opsRichard Zhao
We don't need extra lock, so we use non-atomic bit ops to set/clear bits, merge event_mask0 and event_mask1 into an array, it helps use bit ops. It also fixs the issue: sdmac->event_mask0 = 1 << sdmac->event_id0; sdmac->event_mask1 = 1 << (sdmac->event_id0 - 32); It event_id0 < 32, it shifts negative number. If event_id0 >= 32, it shifts number >= sizeof(int). Both the cases behavior is undefined. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-31dma/imx-sdma: use num_events to validate event_id0Richard Zhao
event number is not always 32. use num_events for checking instead. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-31dma/imx-sdma: move clk_enable out of sdma_request_channelRichard Zhao
It makes clk_enable/disable pair more readable, and fix one bug: sdma_init calls sdma_request_channel, but seems don't know sdma_request_channel enabled the clock. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> [fixed typo in commit log] Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-31dma/imx-sdma: call sdma_set_channel_priority after sdma_request_channelRichard Zhao
sdma_request_channel sets the default priority. sdma_alloc_chan_resources should call sdma_set_channel_priority thereafter to over write it. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-31dma/imx-sdma: use readl_relaxed/writel_relaxed and use writel when necessaryRichard Zhao
use readl_relaxed/writel_relaxed in most places, and use writel when enable channel, because it needs memory barrier. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-31dma/imx-sdma: let sdma_run_channel call sdma_enable_channelRichard Zhao
Let all enable channel code call sdma_enable_channel. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-30dma: imx-sdma: start transfer in issue_pendingSascha Hauer
The DMA engine API requires that transfers are started in issue_pending instead of tx_submit. Fix this. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> [corrected change log to DMA engine API insteadof DMA API] Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-06dma/imx-sdma: save irq flags when use spin_lock in sdma_tx_submitHaitao Zhang
mx53_loco: fix deadlock report from sdma_tx_submit() during boot BugLink: http://bugs.launchpad.net/bugs/878701 Adjust to use spin_lock_irqsave()/spin_unlock_irqresotre(), so to make it safe when called from interrupt context. Signed-off-by: Haitao Zhang <haitao.zhang@linaro.org> Signed-off-by: Eric Miao <eric.miao@linaro.org> Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-12-05IMX/SDMA : save the real count for one DMA transaction.Huang Shijie
When we use the SDMA in the UART driver(such as imx6q), we will meet one situation: Assume we set 64 bytes for the RX DMA buffer. The RX DMA buffer has received some data, but not full. An Aging DMA request will be received by the SDMA controller if we enable the IDDMAEN(UCR4[6]) in this case. So the UART driver needs to know the count of the real received bytes, and push them to upper layer. Add two new fields to sdmac, and update the `residue` in sdma_tx_status(). Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-11-22IMX/DMA : set the DMA direction in the sdma_control()Huang Shijie
Set the right DMA direction in the sdma_control(), else we will get the wrong log when enable the DYNAMIC_DEBUG. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-11-17Merge branch 'dma_slave_direction' into next_test_dirnVinod Koul
resolved conflicts: drivers/media/video/mx3_camera.c
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-12 05:59:09 +0000