summaryrefslogtreecommitdiffstats
path: root/drivers/dma
AgeCommit message (Collapse)Author
2012-02-02i.MX SDMA: Fix burstsize settingsPhilippe Rétornaz
Commit 6584cb88 (ARM i.MX dma: Fix burstsize settings) fixed the mxcmmc driver but forgot to fix the SDMA driver to handle the correct burtsize. This make the SD card access works again with DMA on i.MX31 boards. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-01dma: sh_dma: not all SH DMAC implementations support MEMCPYGuennadi Liakhovetski
Add a flag to allow platforms to specify, whether a DMAC instance supports the MEMCPY operation. To avoid regressions, preserve the current default. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-31Merge branch fixes of ↵Vinod Koul
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine.git
2012-01-31at_hdmac: bugfix for enabling channel irqNikolaus Voss
commit 463894705e4089d0ff69e7d877312d496ac70e5b deleted redundant chan_id and chancnt initialization in dma drivers as this is done in dma_async_device_register(). However, atc_enable_irq() relied on chan_id set before registering the device, what left only channel 0 functional for this driver. This patch introduces atc_enable/disable_chan_irq() as a variant of atc_enable/disable_irq() with the channel as explicit argument. Signed-off-by: Nikolaus Voss <n.voss@weinmann.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-23dmaengine: fix missing 'cnt' in ?: in dmatestDr. David Alan Gilbert
Hi, On the latest tree my compiler has started giving the warning: drivers/dma/dmatest.c:575:28: warning: the omitted middle operand in ?: will always be ?true?, suggest explicit middle operand [-Wparentheses] The following patch fixes the missing middle clause with the same fix that Nicolas Ferre used in the similar clauses. (There seems to have been a race between him fixing that and the extra clause going in a little later). I don't actually know the dmatest code/structures, nor do I own any hardware to test it on (assuming it needs a DMA engine); but this patch builds, the existing code is almost certainly wrong and the fix is the same as the corresponding lines above it. (WTH is x=y?:z legal C anyway?) Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-01-17Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits) ARM: mach-shmobile: specify CHCLR registers on SH7372 dma: shdma: fix runtime PM: clear channel buffers on reset dma/imx-sdma: save irq flags when use spin_lock in sdma_tx_submit dmaengine/ste_dma40: clear LNK on channel startup dmaengine: intel_mid_dma: remove legacy pm interface ASoC: mxs: correct 'direction' of device_prep_dma_cyclic dmaengine: intel_mid_dma: error path fix dmaengine: intel_mid_dma: locking and freeing fixes mtd: gpmi-nand: move to dma_transfer_direction mtd: fix compile error for gpmi-nand mmc: mxs-mmc: fix the dma_transfer_direction migration dmaengine: add DMA_TRANS_NONE to dma_transfer_direction dma: mxs-dma: Don't use CLKGATE bits in CTRL0 to disable DMA channels dma: mxs-dma: make mxs_dma_prep_slave_sg() multi user safe dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled. dma: mxs-dma: fix a typo in comment DMA: PL330: Remove pm_runtime_xxx calls from pl330 probe/remove video i.MX IPU: Fix display connections i.MX IPU DMA: Fix wrong burstsize settings dmaengine/ste_dma40: allow fixed physical channel ... Fix up conflicts in drivers/dma/{Kconfig,mxs-dma.c,pl330.c} The conflicts looked pretty trivial, but I'll ask people to verify them.
2012-01-09Merge tag 'clk' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
clock management changes for i.MX Another simple series related to clock management, this time only for imx. * tag 'clk' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: mxs: select HAVE_CLK_PREPARE for clock clk: add config option HAVE_CLK_PREPARE into Kconfig ASoC: mxs-saif: convert to clk_prepare/clk_unprepare video: mxsfb: convert to clk_prepare/clk_unprepare serial: mxs-auart: convert to clk_prepare/clk_unprepare net: flexcan: convert to clk_prepare/clk_unprepare mtd: gpmi-lib: convert to clk_prepare/clk_unprepare mmc: mxs-mmc: convert to clk_prepare/clk_unprepare dma: mxs-dma: convert to clk_prepare/clk_unprepare net: fec: add clk_prepare/clk_unprepare ARM: mxs: convert platform code to clk_prepare/clk_unprepare clk: add helper functions clk_prepare_enable and clk_disable_unprepare Fix up trivial conflicts in drivers/net/ethernet/freescale/fec.c due to commit 0ebafefcaa7a ("net: fec: add clk_prepare/clk_unprepare") clashing trivially with commit e163cc97f9ac ("net/fec: fix the .remove code").
2012-01-09Merge tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
New feature development This adds support for new features, and contains stuff from most platforms. A number of these patches could have fit into other branches, too, but were small enough not to cause too much confusion here. * tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) mfd/db8500-prcmu: remove support for early silicon revisions ARM: ux500: fix the smp_twd clock calculation ARM: ux500: remove support for early silicon revisions ARM: ux500: update register files ARM: ux500: register DB5500 PMU dynamically ARM: ux500: update ASIC detection for U5500 ARM: ux500: support DB8520 ARM: picoxcell: implement watchdog restart ARM: OMAP3+: hwmod data: Add the default clockactivity for I2C ARM: OMAP3: hwmod data: disable multiblock reads on MMC1/2 on OMAP34xx/35xx <= ES2.1 ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP4 ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP3 ARM: OMAP: hwmod data: Add support for AM35xx UART4/ttyO3 ARM: Orion: Remove address map info from all platform data structures ARM: Orion: Get address map from plat-orion instead of via platform_data ARM: Orion: mbus_dram_info consolidation ARM: Orion: Consolidate the address map setup ARM: Kirkwood: Add configuration for MPP12 as GPIO ARM: Kirkwood: Recognize A1 revision of 6282 chip ARM: ux500: update the MOP500 GPIO assignments ...
2012-01-09Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Device tree conversions for samsung and tegra Both platforms had some initial device tree support, but this adds much more to actually make it usable. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits) ARM: dts: Add intial dts file for EXYNOS4210 SoC, SMDKV310 and ORIGEN ARM: EXYNOS: Add Exynos4 device tree enabled board file rtc: rtc-s3c: Add device tree support input: samsung-keypad: Add device tree support ARM: S5PV210: Modify platform data for pl330 driver ARM: S5PC100: Modify platform data for pl330 driver ARM: S5P64x0: Modify platform data for pl330 driver ARM: EXYNOS: Add a alias for pdma clocks ARM: EXYNOS: Limit usage of pl330 device instance to non-dt build ARM: SAMSUNG: Add device tree support for pl330 dma engine wrappers DMA: PL330: Add device tree support ARM: EXYNOS: Modify platform data for pl330 driver DMA: PL330: Infer transfer direction from transfer request instead of platform data DMA: PL330: move filter function into driver serial: samsung: Fix build for non-Exynos4210 devices serial: samsung: add device tree support serial: samsung: merge probe() function from all SoC specific extensions serial: samsung: merge all SoC specific port reset functions ARM: SAMSUNG: register uart clocks to clock lookup list serial: samsung: remove all uses of get_clksrc and set_clksrc ... Fix up fairly trivial conflicts in arch/arm/mach-s3c2440/clock.c and drivers/tty/serial/Kconfig both due to just adding code close to changes.
2012-01-08Merge branch 'pm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits) PM / Hibernate: Implement compat_ioctl for /dev/snapshot PM / Freezer: fix return value of freezable_schedule_timeout_killable() PM / shmobile: Allow the A4R domain to be turned off at run time PM / input / touchscreen: Make st1232 use device PM QoS constraints PM / QoS: Introduce dev_pm_qos_add_ancestor_request() PM / shmobile: Remove the stay_on flag from SH7372's PM domains PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode PM: Drop generic_subsys_pm_ops PM / Sleep: Remove forward-only callbacks from AMBA bus type PM / Sleep: Remove forward-only callbacks from platform bus type PM: Run the driver callback directly if the subsystem one is not there PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412. PM / Sleep: Merge internal functions in generic_ops.c PM / Sleep: Simplify generic system suspend callbacks PM / Hibernate: Remove deprecated hibernation snapshot ioctls PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled() ARM: S3C64XX: Implement basic power domain support PM / shmobile: Use common always on power domain governor ... Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused XBT_FORCE_SLEEP bit
2012-01-07Merge branch 'depends/rmk/for-linus' into samsung/dtArnd Bergmann
Conflicts: arch/arm/mach-exynos/Makefile arch/arm/mach-exynos/cpu.c -> common.c arch/arm/mach-exynos/include/mach/entry-macro.S arch/arm/mach-exynos/init.c -> common.c arch/arm/mach-s5p64x0/init.c -> common.c arch/arm/mach-s5pv210/init.c -> common.c Multiple files were moved into common.c files in the rmk/for-linus branch, so this moves over the samsung/dt changes to the new files. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-01-06Merge branch 'amba-modalias' of ↵Linus Torvalds
git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'amba-modalias' of git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: sound: aaci: Enable module alias autogeneration for AMBA drivers watchdog: sp805: Enable module alias autogeneration for AMBA drivers fbdev: amba: Enable module alias autogeneration for AMBA drivers serial: pl011: Enable module alias autogeneration for AMBA drivers serial: pl010: Enable module alias autogeneration for AMBA drivers spi: pl022: Enable module alias autogeneration for AMBA drivers rtc: pl031: Enable module alias autogeneration for AMBA drivers rtc: pl030: Enable module alias autogeneration for AMBA drivers mmc: mmci: Enable module alias autogeneration for AMBA drivers input: ambakmi: Enable module alias autogeneration for AMBA drivers gpio: pl061: Enable module alias autogeneration for AMBA drivers dmaengine: pl330: Enable module alias autogeneration for AMBA drivers dmaengine: pl08x: Enable module alias autogeneration for AMBA drivers hwrng: nomadik: Enable module alias autogeneration for AMBA drivers ARM: amba: Auto-generate AMBA driver module aliases during modpost ARM: amba: Move definition of struct amba_id to mod_devicetable.h
2012-01-06dma: shdma: fix runtime PM: clear channel buffers on resetGuennadi Liakhovetski
On platforms, supporting power domains, if the domain, containing a DMAC instance is powered down, the driver fails to resume correctly. On those platforms DMAC channels have an additional CHCLR register for clearing channel buffers. Using this register during runtime resume fixes the problem. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-06dma/imx-sdma: save irq flags when use spin_lock in sdma_tx_submitHaitao Zhang
mx53_loco: fix deadlock report from sdma_tx_submit() during boot BugLink: http://bugs.launchpad.net/bugs/878701 Adjust to use spin_lock_irqsave()/spin_unlock_irqresotre(), so to make it safe when called from interrupt context. Signed-off-by: Haitao Zhang <haitao.zhang@linaro.org> Signed-off-by: Eric Miao <eric.miao@linaro.org> Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-02dmaengine/ste_dma40: clear LNK on channel startupRabin Vincent
Otherwise if a previously physical channel is used as a logical channel, the LNK may have old values which affect the operation of the logical channel since the LNK register has different semantics between physical and logical channels. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Signed-off-by: Narayanan G <narayanan.gopalakrishnan@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-02dmaengine: intel_mid_dma: remove legacy pm interfaceKristen Carlson Accardi
Drivers should not support both legacy pm and new framework. Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-12-28dma: mxs-dma: convert to clk_prepare/clk_unprepareShawn Guo
The patch converts mxs-dma driver to clk_prepare/clk_unprepare by using helper functions clk_prepare_enable/clk_disable_unprepare. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-12-23dmaengine: intel_mid_dma: error path fixAdrian Hunter
Add missing iounmap in error path. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-12-23dmaengine: intel_mid_dma: locking and freeing fixesAdrian Hunter
Two issues are fixed: 1. DMA descriptors are reused so when freeing lli structures that are linked to them, the pointer must be nulled. 2. midc_scan_descriptors() must be called with the channel lock held. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-12-23dmaengine: add DMA_TRANS_NONE to dma_transfer_directionShawn Guo
Before dma_transfer_direction was introduced to replace dma_data_direction, some dmaengine device uses DMA_NONE of dma_data_direction for some talk with its client drivers. The mxs-dma and its clients mxs-mmc and gpmi-nand are such case. This patch adds DMA_TRANS_NONE to dma_transfer_direction and migrate the DMA_NONE use in mxs-dma to it. It also fixes the compile warning below. CC drivers/dma/mxs-dma.o drivers/dma/mxs-dma.c: In function ‘mxs_dma_prep_slave_sg’: drivers/dma/mxs-dma.c:420:16: warning: comparison between ‘enum dma_transfer_direction’ and ‘enum dma_data_direction’ Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-12-23dma: mxs-dma: Don't use CLKGATE bits in CTRL0 to disable DMA channelsLothar Waßmann
This is how the original Freescale code (unintentionally) worked, because the code path which would have asserted the CLKGATE bit was never actually reached in their code. This fixes the nefarious "DMA timout" bug when multiple DMA channels (e.g. GPMI NAND and MMC) are used at the same time. If a better fix for this problem should be found, the clkgate handling could be reinstated. See http://lists.infradead.org/pipermail/linux-arm-kernel/2011-September/065228.html Also reverse the order of mxs_dma_disable_chan() and mxs_dma_reset_chan() in mxs_dma_control() because mxs_dma_reset_chan() can only work when the DMA channel is enabled. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-12-23dma: mxs-dma: make mxs_dma_prep_slave_sg() multi user safeLothar Waßmann
Using a static variable for counting the number of CCWs attached to a DMA channel when appending a new descriptor is not multi user safe. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-12-23dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled.Lothar Waßmann
There is no need to have the clock enabled all the time the driver is loaded. It will be enabled anyway in mxs_dma_alloc_chan_resources() when a channel is actually going to be used. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-12-23dma: mxs-dma: fix a typo in commentLothar Waßmann
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-12-23DMA: PL330: Add device tree supportThomas Abraham
For PL330 dma controllers instantiated from device tree, the channel lookup is based on phandle of the dma controller and dma request id specified by the client node. During probe, the private data of each channel of the controller is set to point to the device node of the dma controller. The 'chan_id' of the each channel is used as the dma request id. Client driver requesting dma channels specify the phandle of the dma controller and the request id. The pl330 filter function converts the phandle to the device node pointer and matches that with channel's private data. If a match is found, the request id from the client node and the 'chan_id' of the channel is matched. A channel is found if both the values match. Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Boojin Kim <boojin.kim@samsung.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-23DMA: PL330: Infer transfer direction from transfer request instead of ↵Thomas Abraham
platform data The transfer direction for a channel can be inferred from the transfer request and the need for specifying transfer direction in platfrom data can be eliminated. So the structure definition 'struct dma_pl330_peri' is no longer required. The channel's private data is set to point to a channel id specified in the platform data (instead of an instance of type 'struct dma_pl330_peri'). The filter function is correspondingly modified to match the channel id. With the 'struct dma_pl330_peri' removed from platform data, the dma controller transfer capabilities cannot be inferred any more. Hence, the dma controller capabilities is specified using platform data. Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Boojin Kim <boojin.kim@samsung.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-23DMA: PL330: move filter function into driverThomas Abraham
The dma channel selection filter function is moved from plat-samsung into the pl330 driver. In additon to that, a check is added in the filter function to ensure that the channel on which the filter has been invoked is pl330 channel instance (and avoid any incorrect access of chan->private in a system with multiple types of DMA drivers). Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-19dma: MX3_IPU fix dependsEric Bénard
ARCH_MX3 was removed in commit a89cf59 : "arm/imx: merge i.MX3 and i.MX6" thus preventing to select MX3_IPU, thus preventing IPU and display to work on i.MX3x SOC. i.MX SDMA support is also affected. Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-12-13ARM: Orion: Get address map from plat-orion instead of via platform_dataAndrew Lunn
Use an getter function in plat-orion/addr-map.c to get the address map structure, rather than pass it to drivers in the platform_data structures. When the drivers are built for none orion platforms, a dummy function is provided instead which returns NULL. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Michael Walle <michael@walle.cc> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-12-08DMA: PL330: Remove pm_runtime_xxx calls from pl330 probe/removeTushar Behera
amba_probe() now calls pm_runtime_get_noresume() and pm_runtime_enable() for the devices before the device probe is called. Hence we don't need to call pm_runtime_get_xxx and pm_runtime_enable() in device probe again. In the same way, since amba_remove() calls the respective pm_runtime functions, those functions need not be called from device remove. This patch fixes following run time error with pl330 driver. dma-pl330 dma-pl330.0: Unbalanced pm_runtime_enable! dma-pl330 dma-pl330.0: failed to get runtime pm Signed-off-by: Giridhar Maruthy <giridhar.maruthy@linaro.org> Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-12-08i.MX IPU DMA: Fix wrong burstsize settingsSascha Hauer
The burstsize (npb in struct chan_param_mem) is set in ipu_ch_param_set_size() once. The number of allowed pixels in a burst depend on the pixel format and the rotation mode. For 16bit formats 16 pixels are allowed whereas for 32bit formats only 8 pixels are allowed. Set these values correctly in ipu_ch_param_set_size() and do not overwrite them afterwards. We do not support rotation right now, so ignore this case. This patch fixes the wrong burstsize setting of 16 pixels for 32bpp. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-12-05dmaengine/ste_dma40: allow fixed physical channelNarayanan G
Allow logical channels to specify the physical channel they want to use. This is needed to avoid two peripherals operating on the same physical channel during some special use-cases. (like mmc and usb during a usb mass storage case). Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Narayanan G <narayanan.gopalakrishnan@stericsson.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-12-05dmaengine/amba-pl08x: Config ccfg and increment phychan_hold if phychan is trueViresh Kumar
Currently, if plchan->phychan is true, we return immediately from prep_phy_chan(). We must configure txd->ccfg and increment phychan_hold before returning. Otherwise, request line number wouldn't be configured in this txd. Reported-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-12-05dmaengine: convert drivers/dma/* to use module_platform_driver()Axel Lin
This patch converts the drivers in drivers/dma/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: Dan Williams <dan.j.williams@intel.com> Cc: Piotr Ziecik <kosmo@semihalf.com> Cc: Rongjun Ying <rongjun.ying@csr.com> Cc: Barry Song <21cnbao@gmail.com> Cc: Pelagicore AB <info@pelagicore.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-12-05IMX/SDMA : save the real count for one DMA transaction.Huang Shijie
When we use the SDMA in the UART driver(such as imx6q), we will meet one situation: Assume we set 64 bytes for the RX DMA buffer. The RX DMA buffer has received some data, but not full. An Aging DMA request will be received by the SDMA controller if we enable the IDDMAEN(UCR4[6]) in this case. So the UART driver needs to know the count of the real received bytes, and push them to upper layer. Add two new fields to sdmac, and update the `residue` in sdma_tx_status(). Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-12-05dma/ep93xx_dma: prevent ep93xx_dma_tasklet() to reference an empty listMika Westerberg
If dma_terminate_all() is called before the ep93xx_dma_tasklet() gets to run, it tries to access an empty ->active list which results following OOPS: Internal error: Oops - undefined instruction: 0 [#1] CPU: 0 Not tainted (3.2.0-rc1EP-1+ #1008) PC is at 0xc184c868 LR is at ep93xx_dma_tasklet+0xec/0x164 pc : [<c184c868>] lr : [<c012b528>] psr: 00000013 sp : c02b7e70 ip : ffffffff fp : c02b7ea4 r10: 00000100 r9 : 80000013 r8 : c02b7e50 r7 : c02b7e70 r6 : c02b7ea4 r5 : 000000a4 r4 : c02b7e70 r3 : c02b751d r2 : 8ae34598 r1 : c184c6e0 r0 : c02b7ea4 Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: c000717f Table: c0004000 DAC: 00000017 Process swapper (pid: 0, stack limit = 0xc02b6270) Stack: (0xc02b7e70 to 0xc02b8000) 7e60: c02b7ea4 c02b7e70 c0008b64 c02bd5c4 7e80: c02d60e0 00000000 00000000 c02bd44c c02d60e0 00000100 c02b7ec4 c02b7ea8 7ea0: c001c49c c012b44c 00000018 00000001 c02d60e0 c02b6000 c02b7f04 c02b7ec8 7ec0: c001cbc0 c001c3e4 c02b7eec c02b7ed8 00000006 0000000a c02bf674 c02c458c 7ee0: 00000011 00000000 c02b7f7c c0004000 41129200 c02b0c80 c02b7f14 c02b7f08 7f00: c001cdd0 c001cb38 c02b7f34 c02b7f18 c000983c c001cd98 c0009a60 60000013 7f20: fefb0001 c02b7f7c c02b7f44 c02b7f38 c0008190 c0009810 c02b7f9c c02b7f48 7f40: c0008b64 c0008190 c02c2bf8 00000002 c02b7f90 60000013 c02b6000 c02d1504 7f60: c02baa88 c02baa80 c0004000 41129200 c02b0c80 c02b7f9c c02b7fa0 c02b7f90 7f80: c0009a54 c0009a60 60000013 ffffffff c02b7fbc c02b7fa0 c000a03c c0009a40 7fa0: c02b80b0 c02b19dc c02b19d8 c02baa80 c02b7fcc c02b7fc0 c02384e4 c0009fd4 7fc0: c02b7ff4 c02b7fd0 c029d924 c0238494 c029d49c 00000000 00000000 c02b19dc 7fe0: c0007175 c02b803c 00000000 c02b7ff8 c000803c c029d700 00000000 00000000 Backtrace: [<c012b43c>] (ep93xx_dma_tasklet+0x0/0x164) from [<c001c49c>] (tasklet_action+0xc8/0xdc) [<c001c3d4>] (tasklet_action+0x0/0xdc) from [<c001cbc0>] (__do_softirq+0x98/0x154) r7:c02b6000 r6:c02d60e0 r5:00000001 r4:00000018 [<c001cb28>] (__do_softirq+0x0/0x154) from [<c001cdd0>] (irq_exit+0x48/0x50) [<c001cd88>] (irq_exit+0x0/0x50) from [<c000983c>] (handle_IRQ+0x3c/0x8c) [<c0009800>] (handle_IRQ+0x0/0x8c) from [<c0008190>] (asm_do_IRQ+0x10/0x14) r7:c02b7f7c r6:fefb0001 r5:60000013 r4:c0009a60 [<c0008180>] (asm_do_IRQ+0x0/0x14) from [<c0008b64>] (__irq_svc+0x24/0xc0) Exception stack(0xc02b7f48 to 0xc02b7f90) 7f40: c02c2bf8 00000002 c02b7f90 60000013 c02b6000 c02d1504 7f60: c02baa88 c02baa80 c0004000 41129200 c02b0c80 c02b7f9c c02b7fa0 c02b7f90 7f80: c0009a54 c0009a60 60000013 ffffffff [<c0009a30>] (default_idle+0x0/0x34) from [<c000a03c>] (cpu_idle+0x78/0xb0) [<c0009fc4>] (cpu_idle+0x0/0xb0) from [<c02384e4>] (rest_init+0x60/0x78) r7:c02baa80 r6:c02b19d8 r5:c02b19dc r4:c02b80b0 [<c0238484>] (rest_init+0x0/0x78) from [<c029d924>] (start_kernel+0x234/0x278) [<c029d6f0>] (start_kernel+0x0/0x278) from [<c000803c>] (0xc000803c) r5:c02b803c r4:c0007175 Code: 42555300 54535953 643d4d45 65766972 (53007372) To make the code a bit more robust against things like these, we modify ep93xx_dma_get_active() to return NULL in case of empty ->active list and make sure that callers handle this correctly. Reported-by: Rafal Prylowski <prylowski@metasoft.pl> Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-12-05dma/ep93xx_dma: fix initialization of M2M control registerRafal Prylowski
Setting the flags in case of IDE didn't have any effect since the control register is overwritten few lines below. So move these to be after the control register is initialized. Signed-off-by: Rafal Prylowski <prylowski@metasoft.pl> Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-11-28dmaengine: at_hdmac: simplify device selection from platform data or DTNicolas Ferre
Using a configuration structure simplify the finding of SoC dependent parameters. Both platform data and device tree ids are using these structures. This will separate data from code and remove the need for an enum. Idea from Grant Likely. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-11-28dmaengine: at_hdmac: empty entry shape modificationNicolas Ferre
Trivial form modification to unify structure look. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-11-28dmaengine: at_hdmac: add const to struct platform_device_id definitionNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-11-28dmaengine/ste_dma40: Add support to use lcla area from esramNarayanan G
This patch provides an option of having the lcla (link address) in ESRAM instead of allocating it. The bool value (use_esram_lcla) in the stedma40_platform_data if set to true, then the lcla address would be taken from platform resources. Also, the corresponding esram regulator is managed in the suspend/resume functions. Signed-off-by: Narayanan G <narayanan.gopalakrishnan@stericsson.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-11-28dmaengine: timb_dma: fix the spare wariningsVinod Koul
Sparse warns: drivers/dma/timb_dma.c:168:17: warning: mixing different enum types drivers/dma/timb_dma.c:168:17: int enum dma_transfer_direction versus drivers/dma/timb_dma.c:168:17: int enum dma_data_direction drivers/dma/timb_dma.c:172:32: warning: mixing different enum types drivers/dma/timb_dma.c:172:32: int enum dma_transfer_direction versus drivers/dma/timb_dma.c:172:32: int enum dma_data_direction Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-11-28dmaengine/dw_dmac: Reconfigure interrupt and chan_cfg register on resumeViresh Kumar
In S2R all DMA registers are reset by hardware and thus they are required to be reprogrammed. The channels which aren't reprogrammed are channel configuration and interrupt enable registers, which are currently programmed at chan_alloc time. This patch creates another routine to initialize a channel. It will try to initialize channel on every dwc_dostart() call. If channel is already initialised then it simply returns, otherwise it configures registers. This routine will also initialize registers on wakeup from S2R, as we mark channels as uninitialized on suspend. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-11-23dmatest: don't use set_freezable_with_signal()Tejun Heo
Commit 981ed70d8e (dmatest: make dmatest threads freezable) made dmatest kthread use set_freezable_with_signal(); however, the interface is scheduled to be removed in the next merge window. The problem is that unlike userland tasks there's no default place which handles signal pending state and it isn't clear who owns and/or is responsible for clearing TIF_SIGPENDING. For example, in the current code, try_to_freeze() clears TIF_SIGPENDING but it isn't sure whether it actually owns the TIF_SIGPENDING nor is it race-free - ie. the task may continue to run with TIF_SIGPENDING set after the freezable section. Unfortunately, we don't have wait_for_completion_freezable_timeout(). This patch open codes it and uses wait_event_freezable_timeout() instead and removes timeout reloading - wait_event_freezable_timeout() won't return across freezing events (currently racy but fix scheduled) and timer doesn't decrement while the task is in freezer. Although this does lose timer-reset-over-freezing, given that timeout is supposed to be long enough and failure to finish inside is considered irrecoverable, I don't think this is worth the complexity. While at it, move completion to outer scope and explain that we're ignoring dangling pointer problem after timeout. This should give slightly better chance at avoiding oops after timeout. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-22dmaengine: pl330: Enable module alias autogeneration for AMBA driversDave Martin
Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Vinod Koul <vinod.koul@intel.com>
2011-11-22dmaengine: pl08x: Enable module alias autogeneration for AMBA driversDave Martin
Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com>
2011-11-22IMX/DMA : set the DMA direction in the sdma_control()Huang Shijie
Set the right DMA direction in the sdma_control(), else we will get the wrong log when enable the DYNAMIC_DEBUG. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-11-22dmaengine/ste_dma40: support pm in dma40Narayanan G
This patch adds power management support to the dma40 driver. The DMA registers are backed up and restored, during suspend/resume. Also flags to track the dma usage have been introduced to facilitate this. Patch also includes few other minor changes, related to formatting, comments. Signed-off-by: Narayanan G <narayanan.gopalakrishnan@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-11-18dmaengine: add CSR SiRFprimaII DMAC driverRongjun Ying
Cc: Jassi Brar <jaswinder.singh@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rongjun Ying <rongjun.ying@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> [fixed direction enums and cyclic api based on changes already merged] Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-11-18DMAEngine: Define interleaved transfer request apiJassi Brar
Define a new api that could be used for doing fancy data transfers like interleaved to contiguous copy and vice-versa. Traditional SG_list based transfers tend to be very inefficient in such cases as where the interleave and chunk are only a few bytes, which call for a very condensed api to convey pattern of the transfer. This api supports all 4 variants of scatter-gather and contiguous transfer. Of course, neither can this api help transfers that don't lend to DMA by nature, i.e, scattered tiny read/writes with no periodic pattern. Also since now we support SLAVE channels that might not provide device_prep_slave_sg callback but device_prep_interleaved_dma, remove the BUG_ON check. Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Acked-by: Barry Song <Baohua.Song@csr.com> [renamed dmaxfer_template to dma_interleaved_template did fixup after the enum dma_transfer_merge] Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-21 17:37:21 +0000