summaryrefslogtreecommitdiffstats
path: root/drivers/dma
AgeCommit message (Collapse)Author
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-04Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (63 commits) dmaengine: mid_dma: mask_peripheral_interrupt only when dmac is idle dmaengine/ep93xx_dma: add module.h include pch_dma: Reduce wasting memory pch_dma: Fix suspend issue dma/timberdale: free_irq() on an error path dma: shdma: transfer based runtime PM dmaengine: shdma: protect against the IRQ handler dmaengine i.MX DMA/SDMA: add missing include of linux/module.h dmaengine: delete redundant chan_id and chancnt initialization in dma drivers dmaengine/amba-pl08x: Check txd->llis_va before freeing dma_pool dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers serial: sh-sci: don't filter on DMA device, use only channel ID ARM: SAMSUNG: Remove Samsung specific enum type for dma direction ASoC: Samsung: Update DMA interface spi/s3c64xx: Merge dma control code spi/s3c64xx: Add support DMA engine API ARM: SAMSUNG: Remove S3C-PL330-DMA driver ARM: S5P64X0: Use generic DMA PL330 driver ARM: S5PC100: Use generic DMA PL330 driver ARM: S5PV210: Use generic DMA PL330 driver ... Fix up fairly trivial conflicts in - arch/arm/mach-exynos4/{Kconfig,clock.c} - arch/arm/mach-s5p64x0/dma.c
2011-11-03[media] dmaengine: ipu-idmac: add support for the DMA_PAUSE controlGuennadi Liakhovetski
To support multi-size buffers in the mx3_camera V4L2 driver we have to be able to stop DMA on a channel without releasing descriptors and completely halting the hardware. Use the DMA_PAUSE control to implement this mode. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-10-31drivers/dma: Add export.h to ste_dma40.cPaul Gortmaker
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31drivers/dma: Add module.h to files implicitly using it.Paul Gortmaker
Fix files that were implicitly using module.h but not calling it out for inclusion directly. We'll break those once we remove the implicit presence otherwise [With input from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31x86: fix up files really needing to include module.hPaul Gortmaker
These files aren't just exporting symbols -- they are also defining a MODULE_LICENSE etc. so give them the full module.h file. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-16dmaengine: mid_dma: mask_peripheral_interrupt only when dmac is idleVinod Koul
The mask_peripheral_interrupt is called when channel wants to mask the interrupt. Move this to suspend as this masking affects other channels as well. Not touching unmask here and unmask would still be done of first channel use Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-10-16dmaengine/ep93xx_dma: add module.h includeMika Westerberg
Due to module.h cleanup it is not anymore included implicitly. Drivers who want to use it need to include it explicitly. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-10-12pch_dma: Reduce wasting memoryTomoya MORINAGA
nr_channels is defined in "struct pch_dma". and struct pch_dma_chan is defined in "struct pch_dma". So, "sizeof(struct pch_dma_chan) * nr_channels" is unnecessary. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-10-11pch_dma: Fix suspend issueTomoya MORINAGA
Currently, executing suspend/hibernation, memory access violation occurs. In pch_dma_save_regs() called by suspend(), you can see the following code. static void pch_dma_save_regs(struct pch_dma *pd) { snip... list_for_each_entry_safe(chan, _c, &pd->dma.channels, device_node) { pd_chan = to_pd_chan(chan); pd->ch_regs[i].dev_addr = channel_readl(pd_chan, DEV_ADDR); pd->ch_regs[i].mem_addr = channel_readl(pd_chan, MEM_ADDR); pd->ch_regs[i].size = channel_readl(pd_chan, SIZE); pd->ch_regs[i].next = channel_readl(pd_chan, NEXT); i++; } } Max loop count is 12 defined at pci_table. So, this caused memory access violation. This patch fixes the issue - Modify array size (MAX_CHAN_NR) Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-10-07dma/timberdale: free_irq() on an error pathDan Carpenter
There was an error path that skipped the free_irq() step by mistake. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-28dma: shdma: transfer based runtime PMGuennadi Liakhovetski
Currently the shdma dmaengine driver uses runtime PM to save power, when no channel on the specific controller is requested by a user. This patch switches the driver to count individual DMA transfers. That way the controller can be powered down between transfers, even if some of its channels are in use. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-09-28dmaengine: shdma: protect against the IRQ handlerGuennadi Liakhovetski
The IRQ handler of the shdma driver accesses common hardware registers, that are also accessed from other contexts. Therefore access to them has to be performed with interrupts disabled, not only with disabled bottom halves. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-09-21Merge branch 'samsung_dma' into nextVinod Koul
2011-09-21dmaengine i.MX DMA/SDMA: add missing include of linux/module.hAxel Lin
Add missing include of linux/module.h to fix build error. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-20dmaengine: delete redundant chan_id and chancnt initialization in dma driversBarry Song
dma_async_device_register will re-init chan_id and chancnt, so whatever chan_id and chancnt are set in drivers, they will be re-written by dma_async_device_register. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Viresh Kumar <viresh.kumar@st.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Piotr Ziecik <kosmo@semihalf.com> Cc: Yong Wang <yong.y.wang@intel.com> Cc: Jaswinder Singh <jassi.brar@samsung.com> Cc: Pelagicore AB <info@pelagicore.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Acked-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-19dmaengine/amba-pl08x: Check txd->llis_va before freeing dma_poolViresh Kumar
In pl08x_free_txd(), check if pool is allocated successfully before freeing it. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-19dmaengine/amba-pl08x: Add support for sg len greater than one for slave ↵Viresh Kumar
transfers Untill now, sg_len greater than one is not supported. This patch adds support to do that. Note: Still, if peripheral is flow controller, sg_len can't be greater that one. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14DMA: PL330: Add DMA_CYCLIC capabilityBoojin Kim
This patch adds DMA_CYCLIC capability that is used for audio driver. DMA driver activated with it reuses the dma requests that were submitted through tx_submit(). Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14DMA: PL330: Remove the start operation for handling DMA_TERMINATE_ALL commandBoojin Kim
Original code carries out the start operation after flush operation. But start operation is not required for DMA_TERMINATE_ALL command. So, this patch removes the unnecessary start operation and only carries out the flush operation for handling DMA_TERMINATE_ALL command. Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> [Fixed typos in changelog] Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14DMA: PL330: Support DMA_SLAVE_CONFIG commandBoojin Kim
Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14DMA: PL330: Update PL330 DMA API driverBoojin Kim
This patch updates following 3 items. 1. Removes unneccessary code. 2. Add AMBA, PL330 configuration 3. Change the meaning of 'peri_id' variable from PL330 event number to specific dma id by user. Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-14DMA: PL330: Add support runtime PM for PL330 DMACBoojin Kim
Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-13locking, dma, ipu: Annotate bank_lock as rawUwe Kleine-König
The bank_lock can be taken in atomic context (irq handling) and therefore cannot be preempted on -rt - annotate it. In mainline this change documents the low level nature of the lock - otherwise there's no functional difference. Lockdep and Sparse checking will work as usual. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: kernel@pengutronix.de Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Dan Williams <dan.j.williams@intel.com> Link: http://lkml.kernel.org/r/1311949627-13260-1-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-05dmaengine: amba-pl08x: make filter check that the channel is owned by pl08xRussell King - ARM Linux
Before converting the dma channel to our private data structure, first check that the channel is indeed one which our driver registered. We do this by ensuring that the underlying device is bound to our driver. This avoids potential oopses if we try to reference 'plchan->name' against a foreign drivers dma channel. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-05dmaengine/ste_dma40: fix memory leak due to prepared descriptorsPer Forlin
Prepared descriptors that are not submitted will not be freed. Add prepared descriptor to a list to be able to release them upon dmaengine_terminate_all(). Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-05dmaengine/ste_dma40: fix Oops due to double free of client descriptorPer Forlin
The client list may exist in two lists at the same time. This makes free fail since the same desc is freed multiple times. Remove desc from client list when adding it to the pending queue. Move free of client owned descriptors from free_dma() to terminate_all(). Unable to handle kernel paging request at virtual address 00100104 pgd = dea8c000 [00100104] *pgd=1ea62831, *pte=00000000, *ppte=00000000 Internal error: Oops: 817 [#1] PREEMPT SMP Modules linked in: CPU: 0 Not tainted (3.1.0-rc3+ #58) PC is at d40_free_chan_resources+0x64/0x330 Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-05dmaengine/ste_dma40: remove duplicate call to d40_pool_lli_free().Per Forlin
d40_desc_free() already calls d40_pool_lli_free(). Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-05dmaengine/ste_dma40: add missing kernel doc for pending_queuePer Forlin
Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-05dmaengine/ste_dma40: fix memory leak due to prepared descriptorsPer Forlin
Prepared descriptors that are not submitted will not be freed. Add prepared descriptor to a list to be able to release them upon dmaengine_terminate_all(). Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-05dmaengine/ste_dma40: fix Oops due to double free of client descriptorPer Forlin
The client list may exist in two lists at the same time. This makes free fail since the same desc is freed multiple times. Remove desc from client list when adding it to the pending queue. Move free of client owned descriptors from free_dma() to terminate_all(). Unable to handle kernel paging request at virtual address 00100104 pgd = dea8c000 [00100104] *pgd=1ea62831, *pte=00000000, *ppte=00000000 Internal error: Oops: 817 [#1] PREEMPT SMP Modules linked in: CPU: 0 Not tainted (3.1.0-rc3+ #58) PC is at d40_free_chan_resources+0x64/0x330 Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-05dmaengine/ste_dma40: remove duplicate call to d40_pool_lli_free().Per Forlin
d40_desc_free() already calls d40_pool_lli_free(). Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-05dmaengine/ste_dma40: add missing kernel doc for pending_queuePer Forlin
Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-09-02Merge branch 'next' into v3.1-rc4Vinod Koul
Fixed trivial conflicts in drivers/dma/amba-pl08x.c Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-08-29dmaengine i.MX SDMA: use request_firmware_nowaitSascha Hauer
The firmware blob may not be available when the driver probes. Instead of blocking the whole kernel use request_firmware_nowait() and continue without firmware. The ROM scripts can already be used then if available. For the devicetree case the ROM scripts are not available, still the probe function should not block. The driver will be unusable in this case, but we have no way of detecting this properly. The configuration of the dma channels will fail, so nothing bad should happen. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-08-29dmaengine i.MX SDMA: set firmware scripts addresses to negative value initiallySascha Hauer
If we do not have a firmare script for a given transfer, the setup of this channel must fail. For this the script addresses have to be < 0 initially, not 0. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-08-29dmaengine i.MX SDMA: lock channel 0Sascha Hauer
channel0 of the sdma engine is the configuration channel. It is a shared resource and thus must be protected by a mutex. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-08-29dmatest: make dmatest threads freezableGuennadi Liakhovetski
Making dmatest threads freezable allows its use for system PM testing. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-08-25dmaengine/amba-pl08x: Call pl08x_free_txd() instead of calling kfree() directlyViresh Kumar
pl08x_prep_channel_resources() is calling kfree() directly for txd(). To maintain consistency in code call pl08x_free_txd() instead. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-08-25dmaengine/amba-pl08x: Pass flow controller information with slave channel dataViresh Kumar
At least, on SPEAr platforms there is one peripheral, JPEG, which can be flow controller for DMA transfer. Currently DMA controller driver didn't support peripheral flow controller configurations. This patch adds device_fc field in struct pl08x_channel_data, which will be used only for slave transfers and is not used in case of mem2mem transfers. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-08-25dmaengine/amba-pl08x: Choose peripheral bus as master busViresh Kumar
When we have DMA transfers between peripheral and memory, then we shouldn't reduce width of peripheral at all, as that may be a strict requirement. But we can always reduce width of memory access, with some compromise in performance. Thus, we must select peripheral as master and not memory. Also this rearranges code to make it shorter. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-08-25dmaengine/amba-pl08x: Align lli_len to max(src.width, dst.width)Viresh Kumar
Currently lli_len is aligned to min of two widths, which looks to be incorrect. Instead it should be aligned to max of both widths. Lets say, total_size = 441 bytes MIN: lets check if min() suits or not: CASE 1: srcwidth = 1, dstwidth = 4 min(src, dst) = 1 i.e. We program transfer size in control reg to 441. Now, till 440 bytes everything is fine, but on the last byte DMAC can't transfer 1 byte to dst, as its width is 4. CASE 2: srcwidth = 4, dstwidth = 1 min(src, dst) = 1 i.e. we program transfer size in control reg to 110 (data transferred = 110 * srcwidth). So, here too 1 byte is left, but on the source side. MAX: Lets check if max() suits or not: CASE 3: srcwidth = 1, dstwidth = 4 max(src, dst) = 4 Aligned size is 440 i.e. We program transfer size in control reg to 440. Now, all 440 bytes will be transferred without any issues. CASE 4: srcwidth = 4, dstwidth = 1 max(src, dst) = 4 Aligned size is 440 i.e. We program transfer size in control reg to 110 (data transferred = 110 * srcwidth). Now, also all 440 bytes will be transferred without any issues. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-08-25dmaengine/amba-pl08x: Add prep_single_byte_llis() routineViresh Kumar
Code for creating single byte llis is present at several places. Create a routine to avoid code redundancy. Also, we don't need one lli per single byte transfer, we can have single lli to do all single byte transfer. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-08-25dmaengine/amba-pl08x: max_bytes_per_lli is TRANSFER_SIZE * src_width (not ↵Viresh Kumar
MIN(width)) max_bytes_per_lli = bd.srcbus.buswidth * PL080_CONTROL_TRANSFER_SIZE_MASK; This is confirmed by ARM support guys. Below is summary of mail exchange with them: [Viresh] What is the total data to be transferred in case source and destination bus widths are different. Suppose, source bus width is 2 bytes and destination is 4 bytes. Now in order to transfer 80 bytes, what should be value of TransferSize field in control reg: 40? or 20?. [David from ARM] The value that is programmed into the TransferSize field should be the number of <SourceWidth> transfers needed to achieve the required data transfer. So, to transfer 80 bytes, with a Source Width of 2, the TransferSize field = should be programmed with: Total transfer size ------------------- = 40 <source width> [Viresh] Will this change if source is 4 bytes and dest is 2? [David] Yes - the calculation then becomes: Total transfer size ------------------- =20 <source width> Also, max_bytes_per_lli must be calculated after fixing src and dest widths not before that. So move this code to the correct place. This patch also removes max_bytes_per_lli from earlier print message, as till that point max_bytes_per_lli is unknown. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-08-25dmaengine/amba-pl08x: Get rid of pl08x_pre_boundary()Viresh Kumar
Pl080 Manual says: "Bursts do not cross the 1KB address boundary" We can program the controller to cross 1 KB boundary on a burst and controller can take care of this boundary condition by itself. Following is the discussion with ARM Technical Support Guys (David): [Viresh] Manual says: "Bursts do not cross the 1KB address boundary" What does that actually mean? As, Maximum size transferable with a single LLI is 4095 * 4 =16380 ~ 16KB. So, if we don't have src/dest address aligned to burst size, we can't use this big of an LLI. [David] There is a difference between bursts describing the total data transferred by the DMA controller and AHB bursts. Bursts described by the programmable parameters in the PL080 have no direct connection with the bursts that are seen on the AHB bus. The statement that "Bursts do not cross the 1KB address boundary" in the TRM is referring to AHB bursts, where this limitation is a requirement of the AHB spec. You can still issue bursts within the PL080 that are in excess of 1KB. The PL080 will make sure that its bursts are broken down into legal AHB bursts which will be formatted to ensure that no AHB burst crosses a 1KB boundary. Based on above discussion, this patch removes all code related to 1 KB boundary as we are not required to handle this in driver. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-08-25dmaengine/amba-pl08x: Schedule tasklet in case of error interruptViresh Kumar
Currently, if error interrupt occurs, nothing is done in interrupt handler (just clearing the interrupts). We must somehow indicate this to the user that DMA is over, due to ERR interrupt or TC interrupt. So, this patch just schedules existing tasklet, with a print showing error interrupt has occurred on which channels. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-08-25dmaengine/amba-pl08x: No need to check "ch->signal < 0"Viresh Kumar
We have just executed following in pl08x_get_phy_channel(): ch->signal = -1; We don't have to compare "ch->signal < 0", as this will always be true. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-08-25dmaengine/amba-pl08x: Simplify pl08x_ensure_on()Viresh Kumar
Simply writing 1 on bit 0 is sufficient instead of reading and clearing bits. Also as per manual, for bit 3-31 of DMACConfiguration register: "read undefined, write as 0" So, we must not rely on values read from this registers bit 3-31. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-08-25dmaengine/amba-pl08x: support runtime PMViresh Kumar
Insert notifiers for the runtime PM API. With this the runtime PM layer kicks in to action where used. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-08-25dmaengine/amba-pl08x: Changing few prints to dev_dbg from dev_infoViresh Kumar
For 8 memory and 16 slave channels 35 boot print lines are printed. And that is too much. Most of this would be more useful for debugging. So moving few of them to dev_dbg instead of dev_info. Now only 3 prints will be printed. This also rearrange one of the debug message to fit into two lines. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>