summaryrefslogtreecommitdiffstats
path: root/drivers/dma
AgeCommit message (Collapse)Author
2014-02-12dma: mv_xor: Silence a bunch of LPAE-related warningsOlof Johansson
Enabling some of the mvebu platforms in the multiplatform config for ARM enabled these drivers, which also triggered a bunch of warnings when LPAE is enabled (thus making phys_addr_t 64-bit). Most changes are switching printk formats, but also a bit of changes to what used to be array-based pointer arithmetic that could just be done with the address types instead. The warnings were: drivers/dma/mv_xor.c: In function 'mv_xor_tx_submit': drivers/dma/mv_xor.c:500:3: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'dma_addr_t' [-Wformat] drivers/dma/mv_xor.c: In function 'mv_xor_alloc_chan_resources': drivers/dma/mv_xor.c:553:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] drivers/dma/mv_xor.c:555:4: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] drivers/dma/mv_xor.c: In function 'mv_xor_prep_dma_memcpy': drivers/dma/mv_xor.c:584:2: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Wformat] drivers/dma/mv_xor.c:584:2: warning: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Wformat] drivers/dma/mv_xor.c: In function 'mv_xor_prep_dma_xor': drivers/dma/mv_xor.c:628:2: warning: format '%u' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Wformat] Acked-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-02-02ARM: moxart: move DMA_OF selection to driverRob Herring
Move the DMA_OF selection to the DMA driver to fix kconfig warning: warning: (ARCH_MOXART) selects DMA_OF which has unmet direct dependencies (DMADEVICES && OF) Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-29Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dma updates from Vinod Koul: - new driver for BCM2835 used in R-pi - new driver for MOXA ART - dma_get_any_slave_channel API for DT based systems - minor fixes and updates spread acrooss driver [ The fsl-ssi dual fifo mode support addition clashed badly with the other changes to fsl-ssi that came in through the sound merge. I did a very rough cut at fixing up the conflict, but Nicolin Chen (author of both sides) will need to verify and check things ] * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits) dmaengine: mmp_pdma: fix mismerge dma: pl08x: Export pl08x_filter_id acpi-dma: align documentation with kernel-doc format dma: fix vchan_cookie_complete() debug print DMA: dmatest: extend the "device" module parameter to 32 characters drivers/dma: fix error return code dma: omap: Set debug level to debugging messages dmaengine: fix kernel-doc style typos for few comments dma: tegra: add support for Tegra148/124 dma: dw: use %pad instead of casting dma_addr_t dma: dw: join split up messages dma: dw: fix style of multiline comment dmaengine: k3dma: fix sparse warnings dma: pl330: Use dma_get_slave_channel() in the of xlate callback dma: pl330: Differentiate between submitted and issued descriptors dmaengine: sirf: Add device_slave_caps interface DMA: Freescale: change BWC from 256 bytes to 1024 bytes dmaengine: Add MOXA ART DMA engine driver dmaengine: Add DMA_PRIVATE to BCM2835 driver dma: imx-sdma: Assign a default script number for ROM firmware cases ...
2014-01-29dmaengine: mmp_pdma: fix mismergeArnd Bergmann
The merge between 2b7f65b11d87f "mmp_pdma: Style neatening" and 8010dad55a0ab0 "dma: add dma_get_any_slave_channel(), for use in of_xlate()" caused a build error by leaving obsolete code in place: mmp_pdma.c: In function 'mmp_pdma_dma_xlate': mmp_pdma.c:909:31: error: 'candidate' undeclared mmp_pdma.c:912:3: error: label 'retry' used but not defined mmp_pdma.c:901:24: warning: unused variable 'c' [-Wunused-variable] This removes the extraneous lines. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-28dma: pl08x: Export pl08x_filter_idSachin Kamat
Export the symbol so that it is accessible to modules. Fixes the following error: ERROR: "pl08x_filter_id" [sound/soc/samsung/snd-soc-s3c-dma.ko] undefined! Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-26acpi-dma: align documentation with kernel-doc formatAndy Shevchenko
It mostly fixes the "RETURN" sections in the resulting manual page. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-26dma: fix vchan_cookie_complete() debug printJonas Jensen
vd->tx.cookie is set zero on dma_cookie_complete(), save to local before printing it. Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-23Merge tag 'dt-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "DT and DT-conversion-related changes for various ARM platforms. Most of these are to enable various devices on various boards, etc, and not necessarily worth enumerating. New boards and systems continue to come in as new devicetree files that don't require corresponding C changes any more, which is indicating that the system is starting to work fairly well. A few things worth pointing out: * ST Ericsson ux500 platforms have made the major push to move over to fully support the platform with DT * Renesas platforms continue their conversion over from legacy platform devices to DT-based for hardware description" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (327 commits) ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6 ARM: dts: sirf: add lost minigpsrtc device node ARM: dts: sirf: add clock, frequence-voltage table for CPU0 ARM: dts: sirf: add lost bus_width, clock and status for sdhci ARM: dts: sirf: add lost clocks for cphifbg ARM: dts: socfpga: add pl330 clock ARM: dts: socfpga: update L2 tag and data latency arm: sun7i: cubietruck: Enable the i2c controllers ARM: dts: add support for EXYNOS4412 based TINY4412 board ARM: dts: Add initial support for Arndale Octa board ARM: bcm2835: add USB controller to device tree ARM: dts: MSM8974: Add MMIO architected timer node ARM: dts: MSM8974: Add restart node ARM: dts: sun7i: external clock outputs ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N style ARM: dts: sun7i: Add pin muxing options for clock outputs ARM: dts: sun7i: Add rtp controller node ARM: dts: sun5i: Add rtp controller node ARM: dts: sun4i: Add rtp controller node ...
2014-01-23Merge tag 'cleanup-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This is the branch where we usually queue up cleanup efforts, moving drivers out of the architecture directory, header file restructuring, etc. Sometimes they tangle with new development so it's hard to keep it strictly to cleanups. Some of the things included in this branch are: * Atmel SAMA5 conversion to common clock * Reset framework conversion for tegra platforms - Some of this depends on tegra clock driver reworks that are shared with Mike Turquette's clk tree. * Tegra DMA refactoring, which are shared branches with the DMA tree. * Removal of some header files on exynos to prepare for multiplatform" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits) ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h ARM: mvebu: remove prototypes of non-existing functions from common.h ARM: mvebu: move ARMADA_XP_MAX_CPUS to armada-370-xp.h serial: sh-sci: Rework baud rate calculation serial: sh-sci: Compute overrun_bit without using baud rate algo serial: sh-sci: Remove unused GPIO request code serial: sh-sci: Move overrun_bit and error_mask fields out of pdata serial: sh-sci: Support resources passed through platform resources serial: sh-sci: Don't check IRQ in verify port operation serial: sh-sci: Set the UPF_FIXED_PORT flag serial: sh-sci: Remove duplicate interrupt check in verify port op serial: sh-sci: Simplify baud rate calculation algorithms serial: sh-sci: Remove baud rate calculation algorithm 5 serial: sh-sci: Sort headers alphabetically ARM: EXYNOS: Kill exynos_pm_late_initcall() ARM: EXYNOS: Consolidate selection of PM_GENERIC_DOMAINS for Exynos4 ARM: at91: switch Calao QIL-A9260 board to DT clk: at91: fix pmc_clk_ids data type attriubte PM / devfreq: use inclusion <mach/map.h> instead of <plat/map-s5p.h> ARM: EXYNOS: remove <mach/regs-clock.h> for exynos ...
2014-01-20DMA: dmatest: extend the "device" module parameter to 32 charactersGuennadi Liakhovetski
With Device Tree a typical DMA controller device name can look like 10000000.dma-controller, which extends the current size of the string, allocated for this parameter. This patch extends its size from 20 to 32 characters. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-20drivers/dma: fix error return codeJulia Lawall
Set the return variable to an error code as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-20dma: omap: Set debug level to debugging messagesEzequiel Garcia
The channel allocated/released messages are just informative and not really interesting to users. Change them to "debug" level. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-20Merge branch 'for-next' into for-linusTakashi Iwai
2014-01-20dma: tegra: add support for Tegra148/124Laxman Dewangan
Tegra148 introduces a few changes to the APB DMA HW registers. Update the driver to cope with them. Tegra124 inherits these changes. * The register address stride between DMA channels increases. * A new per-channel WCOUNT register is introduced. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Kunal Agrawal <kunala@nvidia.com> [swarren, remove .dts file change, rewrote commit description, removed some duplicate/unused code and register IO] Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-20dma: dw: use %pad instead of casting dma_addr_tAndy Shevchenko
Since we have nice helper to print dma_addr_t values by reference we may use it instead of explicit casting to a longest type. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-20dma: dw: join split up messagesAndy Shevchenko
The joined messages are better to grep when debugging. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-20dma: dw: fix style of multiline commentAndy Shevchenko
Simple fix a style of the multiline comment. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-20dmaengine: k3dma: fix sparse warningsZhangfei Gao
Fix sparse warnings: drivers/dma/k3dma.c:480:20: warning: Using plain integer as NULL pointer drivers/dma/k3dma.c:820:1: warning: symbol 'k3_dma_pmops' was not declared. Should it be static? Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-20dma: pl330: Use dma_get_slave_channel() in the of xlate callbackLars-Peter Clausen
Currently the driver uses dma_request_channel() with a custom filter function to find the requested channel. This will loop over all available channels until the one we want has been found, but we already know which channel we want to request, so we can dma_get_slave_channel(). This also makes the code a bit shorter cleaner. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-20dma: pl330: Differentiate between submitted and issued descriptorsLars-Peter Clausen
The pl330 dmaengine driver currently does not differentiate between submitted and issued descriptors. It won't start transferring a newly submitted descriptor until issue_pending() is called, but only if it is idle. If it is active and a new descriptor is submitted before it goes idle it will happily start the newly submitted descriptor once all earlier submitted descriptors have been completed. This is not a 100% correct with regards to the dmaengine interface semantics. A descriptor is not supposed to be started until the next issue_pending() call after the descriptor has been submitted. This patch adds a second per channel list that keeps track of the submitted descriptors. Once issue_pending() is called the submitted descriptors are moved to the working list and only descriptors on the working list are started. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-20dmaengine: sirf: Add device_slave_caps interfaceRongjun Ying
this patch adds device_slave_caps() callback as SiRF SoC sound drivers depend on it. Signed-off-by: Rongjun Ying <rongjun.ying@csr.com> Signed-off-by: Barry Song <Barry.Song@csr.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-20DMA: Freescale: change BWC from 256 bytes to 1024 bytesHongbo Zhang
Freescale DMA has a feature of BandWidth Control (ab. BWC), which is currently 256 bytes and should be changed to 1024 bytes for best DMA throughput. Changing BWC from 256 to 1024 will improve DMA performance much, in cases whatever one channel is running or multi channels are running simultanously, large or small buffers are copied. And this change doesn't impact memory access performance remarkably, lmbench tests show that for some cases the memory performance are decreased very slightly, while the others are even better. Tested on T4240. Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-20dmaengine: Add MOXA ART DMA engine driverJonas Jensen
The MOXA ART SoC has a DMA controller capable of offloading expensive memory operations, such as large copies. This patch adds support for the controller including four channels. Two of these are used to handle MMC copy on the UC-7112-LX hardware. The remaining two can be used in a future audio driver or client application. Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-20dmaengine: Add DMA_PRIVATE to BCM2835 driverFlorian Meier
Without DMA_PRIVATE the driver is not able to allocate more than one channel. Since it uses dma_get_any_slave_channel that calls private_candidate, the second allocation fails at /* some channels are already publicly allocated */ Maybe it should be fixed in the core, but at least this fixes the bug. Signed-off-by: Florian Meier <florian.meier@koalo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-16Merge remote-tracking branch 'asoc/topic/dma' into for-tiwaiMark Brown
2014-01-14dma: pl330: Set residue_granularityLars-Peter Clausen
The pl330 driver currently does not support residue reporting, so set the residue granularity to DMA_RESIDUE_GRANULARITY_DESCRIPTOR. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-13dma: imx-sdma: Assign a default script number for ROM firmware casesNicolin Chen
i.MX series have inner firmware in its ROM code: when SDMA isn't provided any firmware from Kernel or rootfs, the default inner ROM firmware will be activated. However the current driver doesn't assign any script number to this situation, and those platform running in this case would be broken. Thus this patch adds a default script number when no external firmware being loaded so that people would continue to be able to use basic scripts to run their platform without any firmware. Reported-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-09dma:mmp_tdma: get sram pool through device treeNenghua Cao
Support to get sram pool from generic device tree binding. The existing way of get sram poll, directly call sram_get_gpool(), still work here. Signed-off-by: Nenghua Cao <nhcao@marvell.com> Acked-by: Zhangfei Gao <zhangfei.gao@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-07dmaengine: Add support for BCM2835Florian Meier
Add support for DMA controller of BCM2835 as used in the Raspberry Pi. Currently it only supports cyclic DMA. Signed-off-by: Florian Meier <florian.meier@koalo.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-07Merge branch 'topic/of' into for-linusVinod Koul
Conflicts: drivers/dma/mmp_pdma.c Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-07Merge branch 'topic/defer_probe' into for-linusVinod Koul
2014-01-02drivers/dma/ioat/dma.c: check DMA mapping error in ioat_dma_self_test()Jiang Liu
Check DMA mapping return values in function ioat_dma_self_test() to get rid of following warning message. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1203 at lib/dma-debug.c:937 check_unmap+0x4c0/0x9a0() ioatdma 0000:00:04.0: DMA-API: device driver failed to check map error[device address=0x000000085191b000] [size=2000 bytes] [mapped as single] Modules linked in: ioatdma(+) mac_hid wmi acpi_pad lp parport hidd_generic usbhid hid ixgbe isci dca libsas ahci ptp libahci scsi_transport_sas meegaraid_sas pps_core mdio CPU: 0 PID: 1203 Comm: systemd-udevd Not tainted 3.13.0-rc4+ #8 Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIIN1.86B.0044.L09.1311181644 11/18/2013 Call Trace: dump_stack+0x4d/0x66 warn_slowpath_common+0x7d/0xa0 warn_slowpath_fmt+0x4c/0x50 check_unmap+0x4c0/0x9a0 debug_dma_unmap_page+0x81/0x90 ioat_dma_self_test+0x3d2/0x680 [ioatdma] ioat3_dma_self_test+0x12/0x30 [ioatdma] ioat_probe+0xf4/0x110 [ioatdma] ioat3_dma_probe+0x268/0x410 [ioatdma] ioat_pci_probe+0x122/0x1b0 [ioatdma] local_pci_probe+0x45/0xa0 pci_device_probe+0xd9/0x130 driver_probe_device+0x171/0x490 __driver_attach+0x93/0xa0 bus_for_each_dev+0x6b/0xb0 driver_attach+0x1e/0x20 bus_add_driver+0x1f8/0x2b0 driver_register+0x81/0x110 __pci_register_driver+0x60/0x70 ioat_init_module+0x89/0x1000 [ioatdma] do_one_initcall+0xe2/0x250 load_module+0x2313/0x2a00 SyS_init_module+0xd9/0x130 system_call_fastpath+0x1a/0x1f ---[ end trace 990c591681d27c31 ]--- Mapped at: debug_dma_map_page+0xbe/0x180 ioat_dma_self_test+0x1ab/0x680 [ioatdma] ioat3_dma_self_test+0x12/0x30 [ioatdma] ioat_probe+0xf4/0x110 [ioatdma] ioat3_dma_probe+0x268/0x410 [ioatdma] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-02Merge remote-tracking branch 'asoc/topic/dma' into asoc-nextMark Brown
2013-12-26Merge branch 'tegra/dma-reset-rework' into next/dtOlof Johansson
Bringing in the tegra dma/reset framework cleanup as a base for the DT changes. * tegra/dma-reset-rework: (320 commits) spi: tegra: checking for ERR_PTR instead of NULL ASoC: tegra: update module reset list for Tegra124 clk: tegra: remove bogus PCIE_XCLK clk: tegra: remove legacy reset APIs ARM: tegra: remove legacy DMA entries from DT ARM: tegra: remove legacy clock entries from DT USB: EHCI: tegra: use reset framework Input: tegra-kbc - use reset framework serial: tegra: convert to standard DMA DT bindings serial: tegra: use reset framework spi: tegra: convert to standard DMA DT bindings spi: tegra: use reset framework staging: nvec: use reset framework i2c: tegra: use reset framework ASoC: tegra: convert to standard DMA DT bindings ASoC: tegra: allocate AHUB FIFO during probe() not startup() ASoC: tegra: call pm_runtime APIs around register accesses ASoC: tegra: use reset framework dma: tegra: register as an OF DMA controller dma: tegra: use reset framework ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-26Merge tag 'tegra-for-3.14-dmas-resets-rework' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/cleanup From Stephen Warren: ARM: tegra: implement common DMA and resets DT bindings This series converts the Tegra DTs and drivers to use the common/ standard DMA and reset bindings, rather than custom bindings. It also adds complete documentation for the Tegra clock bindings without actually changing any binding definitions. This conversion relies on a few sets of patches in branches from outside the Tegra tree: 1) A patch to add an DMA channel request API which allows deferred probe to be implemented. 2) A patch to implement a common part of the of_xlate function for DMA controllers. 3) Some ASoC patches (which in turn rely on (1) above), which support deferred probe during DMA channel allocation. 4) The Tegra clock driver changes for 3.14. Consequently, this branch is based on a merge of all of those external branches. In turn, this branch is or will be pulled into a few places that either rely on features introduced here, or would otherwise conflict with the patches: a) Tegra's own for-3.14/powergate and for-4.14/dt branches, to avoid conflicts. b) The DRM tree, which introduces new code that relies on the reset controller framework introduced in this branch, and to avoid conflicts. * tag 'tegra-for-3.14-dmas-resets-rework' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (30 commits) spi: tegra: checking for ERR_PTR instead of NULL ASoC: tegra: update module reset list for Tegra124 clk: tegra: remove bogus PCIE_XCLK clk: tegra: remove legacy reset APIs ARM: tegra: remove legacy DMA entries from DT ARM: tegra: remove legacy clock entries from DT USB: EHCI: tegra: use reset framework Input: tegra-kbc - use reset framework serial: tegra: convert to standard DMA DT bindings serial: tegra: use reset framework spi: tegra: convert to standard DMA DT bindings spi: tegra: use reset framework staging: nvec: use reset framework i2c: tegra: use reset framework ASoC: tegra: convert to standard DMA DT bindings ASoC: tegra: allocate AHUB FIFO during probe() not startup() ASoC: tegra: call pm_runtime APIs around register accesses ASoC: tegra: use reset framework dma: tegra: register as an OF DMA controller dma: tegra: use reset framework ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-26Merge branches 'depends/asoc-dma', 'depends/dma-of' and 'depends/tegra-clk' ↵Olof Johansson
into next/cleanup Merging in external dependencies for the Tegra DMA and reset controller refactoring from external trees. Per Stephen Warren, the stability of these branches have been negotiated with the relevant parties (Vinod/Mark/Mike) * depends/asoc-dma: ASoC: dmaengine: fix deferred probe detection ASoC: dmaengine: support deferred probe for DMA channels dma: add channel request API that supports deferred probe ASoC: dmaengine: add custom DMA config to snd_dmaengine_pcm_config ASoC: don't leak on error in snd_dmaengine_pcm_register ASoC: restructure dmaengine_pcm_request_chan_of() ASoC: generic-dmaengine-pcm: Set BATCH flag when residue reporting is not supported ASoC: Add resource managed snd_dmaengine_pcm_register() * depends/dma-of: dma: add dma_get_any_slave_channel(), for use in of_xlate() * depends/tegra-clk: (42 commits) clk: tegra: fix __clk_lookup() return value checks clk: tegra: Do not print errors for clk_round_rate() clk: tegra: Initialize DSI low-power clocks clk: tegra: add FUSE clock device clk: tegra: Properly setup PWM clock on Tegra30 clk: tegra: Initialize secondary gr3d clock on Tegra30 clk: tegra114: Initialize clocks needed for HDMI clk: tegra124: add suspend/resume function for tegra_cpu_car_ops clk: tegra124: add wait_for_reset and disable_clock for tegra_cpu_car_ops clk: tegra124: Add support for Tegra124 clocks clk: tegra124: Add new peripheral clocks clk: tegra124: Add common clk IDs to clk-id.h clk: tegra: add TEGRA_PERIPH_NO_GATE clk: tegra: add locking to periph clks clk: tegra: Add periph regs bank X clk: tegra: Add support for PLLSS clk: tegra: move tegra20 to common infra clk: tegra: move tegra30 to common infra clk: tegra: introduce common gen4 super clock clk: tegra: move PMC, fixed clocks to common files ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-26Merge tag 'v3.13-rc4' into next/cleanupOlof Johansson
Linux 3.13-rc4
2013-12-18net_dma: mark brokenDan Williams
net_dma can cause data to be copied to a stale mapping if a copy-on-write fault occurs during dma. The application sees missing data. The following trace is triggered by modifying the kernel to WARN if it ever triggers copy-on-write on a page that is undergoing dma: WARNING: CPU: 24 PID: 2529 at lib/dma-debug.c:485 debug_dma_assert_idle+0xd2/0x120() ioatdma 0000:00:04.0: DMA-API: cpu touching an active dma mapped page [pfn=0x16bcd9] Modules linked in: iTCO_wdt iTCO_vendor_support ioatdma lpc_ich pcspkr dca CPU: 24 PID: 2529 Comm: linbug Tainted: G W 3.13.0-rc1+ #353 00000000000001e5 ffff88016f45f688 ffffffff81751041 ffff88017ab0ef70 ffff88016f45f6d8 ffff88016f45f6c8 ffffffff8104ed9c ffffffff810f3646 ffff8801768f4840 0000000000000282 ffff88016f6cca10 00007fa2bb699349 Call Trace: [<ffffffff81751041>] dump_stack+0x46/0x58 [<ffffffff8104ed9c>] warn_slowpath_common+0x8c/0xc0 [<ffffffff810f3646>] ? ftrace_pid_func+0x26/0x30 [<ffffffff8104ee86>] warn_slowpath_fmt+0x46/0x50 [<ffffffff8139c062>] debug_dma_assert_idle+0xd2/0x120 [<ffffffff81154a40>] do_wp_page+0xd0/0x790 [<ffffffff811582ac>] handle_mm_fault+0x51c/0xde0 [<ffffffff813830b9>] ? copy_user_enhanced_fast_string+0x9/0x20 [<ffffffff8175fc2c>] __do_page_fault+0x19c/0x530 [<ffffffff8175c196>] ? _raw_spin_lock_bh+0x16/0x40 [<ffffffff810f3539>] ? trace_clock_local+0x9/0x10 [<ffffffff810fa1f4>] ? rb_reserve_next_event+0x64/0x310 [<ffffffffa0014c00>] ? ioat2_dma_prep_memcpy_lock+0x60/0x130 [ioatdma] [<ffffffff8175ffce>] do_page_fault+0xe/0x10 [<ffffffff8175c862>] page_fault+0x22/0x30 [<ffffffff81643991>] ? __kfree_skb+0x51/0xd0 [<ffffffff813830b9>] ? copy_user_enhanced_fast_string+0x9/0x20 [<ffffffff81388ea2>] ? memcpy_toiovec+0x52/0xa0 [<ffffffff8164770f>] skb_copy_datagram_iovec+0x5f/0x2a0 [<ffffffff8169d0f4>] tcp_rcv_established+0x674/0x7f0 [<ffffffff816a68c5>] tcp_v4_do_rcv+0x2e5/0x4a0 [..] ---[ end trace e30e3b01191b7617 ]--- Mapped at: [<ffffffff8139c169>] debug_dma_map_page+0xb9/0x160 [<ffffffff8142bf47>] dma_async_memcpy_pg_to_pg+0x127/0x210 [<ffffffff8142cce9>] dma_memcpy_pg_to_iovec+0x119/0x1f0 [<ffffffff81669d3c>] dma_skb_copy_datagram_iovec+0x11c/0x2b0 [<ffffffff8169d1ca>] tcp_rcv_established+0x74a/0x7f0: ...the problem is that the receive path falls back to cpu-copy in several locations and this trace is just one of the areas. A few options were considered to fix this: 1/ sync all dma whenever a cpu copy branch is taken 2/ modify the page fault handler to hold off while dma is in-flight Option 1 adds yet more cpu overhead to an "offload" that struggles to compete with cpu-copy. Option 2 adds checks for behavior that is already documented as broken when using get_user_pages(). At a minimum a debug mode is warranted to catch and flag these violations of the dma-api vs get_user_pages(). Thanks to David for his reproducer. Cc: <stable@vger.kernel.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Reported-by: David Whipple <whipple@securedatainnovations.ch> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-12-18dma: pl330: ensure DMA descriptors are zero-initialisedWill Deacon
I see the following splat with 3.13-rc1 when attempting to perform DMA: [ 253.004516] Alignment trap: not handling instruction e1902f9f at [<c0204b40>] [ 253.004583] Unhandled fault: alignment exception (0x221) at 0xdfdfdfd7 [ 253.004646] Internal error: : 221 [#1] PREEMPT SMP ARM [ 253.004691] Modules linked in: dmatest(+) [last unloaded: dmatest] [ 253.004798] CPU: 0 PID: 671 Comm: kthreadd Not tainted 3.13.0-rc1+ #2 [ 253.004864] task: df9b0900 ti: df03e000 task.ti: df03e000 [ 253.004937] PC is at dmaengine_unmap_put+0x14/0x34 [ 253.005010] LR is at pl330_tasklet+0x3c8/0x550 [ 253.005087] pc : [<c0204b44>] lr : [<c0207478>] psr: a00e0193 [ 253.005087] sp : df03fe48 ip : 00000000 fp : df03bf18 [ 253.005178] r10: bf00e108 r9 : 00000001 r8 : 00000000 [ 253.005245] r7 : df837040 r6 : dfb41800 r5 : df837048 r4 : df837000 [ 253.005316] r3 : dfdfdfcf r2 : dfb41f80 r1 : df837048 r0 : dfdfdfd7 [ 253.005384] Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 253.005459] Control: 30c5387d Table: 9fb9ba80 DAC: fffffffd [ 253.005520] Process kthreadd (pid: 671, stack limit = 0xdf03e248) This is due to desc->txd.unmap containing garbage (uninitialised memory). Rather than add another dummy initialisation to _init_desc, instead ensure that the descriptors are zero-initialised during allocation and remove the dummy, per-field initialisation. Cc: Andriy Shevchenko <andriy.shevchenko@intel.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-12-18dma: pl08x: allow zero slave channelsLinus Walleij
It might happen that a platform wants to use its DMA engine for memcpy only, and then we have zero slave channels to initialize, so allow the slave initialization to return zero. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-12-18dma: edma: Set debug level to debugging messagesEzequiel Garcia
The channel allocated/released messages are very spammy and not really interesting to users. Change them to "debug" level. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Matt Porter <mporter@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-12-16dmaengine: mmp: fix uninitialized variableVinod Koul
drivers/dma/mmp_tdma.c:236:8: warning: 'tdcr' may be used uninitialized in this function [-Wuninitialized] Reported-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-12-16dmaengine: mmp_tdma: fix the 'pointer from integer' warningsVinod Koul
the driver is using unsigned long type for storing the channel register base "reg_base", this leads to bunch of warns when we try to use this as pointer. So better use an iomem pointer type for this variable drivers/dma/mmp_tdma.c: In function 'mmp_tdma_chan_set_desc': drivers/dma/mmp_tdma.c:143: warning: passing argument 2 of '__raw_writel' makes pointer from integer without a cast drivers/dma/mmp_tdma.c:144: warning: passing argument 1 of '__raw_readl' makes pointer from integer without a cast drivers/dma/mmp_tdma.c:144: warning: passing argument 2 of '__raw_writel' makes pointer from integer without a cast drivers/dma/mmp_tdma.c: In function 'mmp_tdma_enable_chan': drivers/dma/mmp_tdma.c:151: warning: passing argument 2 of '__raw_writel' makes pointer from integer without a cast drivers/dma/mmp_tdma.c:153: warning: passing argument 1 of '__raw_readl' makes pointer from integer without a cast drivers/dma/mmp_tdma.c:153: warning: passing argument 2 of '__raw_writel' makes pointer from integer without a cast drivers/dma/mmp_tdma.c: In function 'mmp_tdma_disable_chan': drivers/dma/mmp_tdma.c:160: warning: passing argument 1 of '__raw_readl' makes pointer from integer without a cast drivers/dma/mmp_tdma.c:160: warning: passing argument 2 of '__raw_writel' makes pointer from integer without a cast drivers/dma/mmp_tdma.c:164: warning: passing argument 2 of '__raw_writel' makes pointer from integer without a cast drivers/dma/mmp_tdma.c: In function 'mmp_tdma_resume_chan': drivers/dma/mmp_tdma.c:171: warning: passing argument 1 of '__raw_readl' makes pointer from integer without a cast drivers/dma/mmp_tdma.c:171: warning: passing argument 2 of '__raw_writel' makes pointer from integer without a cast drivers/dma/mmp_tdma.c: In function 'mmp_tdma_pause_chan': drivers/dma/mmp_tdma.c:178: warning: passing argument 1 of '__raw_readl' makes pointer from integer without a cast drivers/dma/mmp_tdma.c:178: warning: passing argument 2 of '__raw_writel' makes pointer from integer without a cast drivers/dma/mmp_tdma.c: In function 'mmp_tdma_config_chan': drivers/dma/mmp_tdma.c:263: warning: passing argument 2 of '__raw_writel' makes pointer from integer without a cast drivers/dma/mmp_tdma.c: In function 'mmp_tdma_clear_chan_irq': drivers/dma/mmp_tdma.c:269: warning: passing argument 1 of '__raw_readl' makes pointer from integer without a cast drivers/dma/mmp_tdma.c:274: warning: passing argument 2 of '__raw_writel' makes pointer from integer without a cast Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-12-16mmp_pdma: Style neateningJoe Perches
Neaten code used as a template for other drivers. Make the code more consistent with kernel styles. o Convert #defines with (1<<foo) to BIT(foo) o Alignment wrapping o Logic inversions to put return at end of functions o Convert devm_kzalloc with multiply to devm_kcalloc o typo of Peripheral fix Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-12-16dma: imx-sdma: Add new dma type for ssi dual fifo scriptNicolin Chen
This patch adds a new DMA_TYPE for SSI dual FIFO script, included in SDMA firmware version 2. This script would allow SSI use dual fifo mode to transimit/receive data without occasional hardware underrun/overrun. Signed-off-by: Nicolin Chen <b42378@freescale.com> Acked-by: Kumar Gala <galak@codeaurora.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-12-16dma: imx-sdma: Add sdma firmware version 2 supportNicolin Chen
On i.MX5/6 series, SDMA is using new version firmware to support SSI dual FIFO feature and HDMI Audio (i.MX6Q/DL only). Thus add it. Signed-off-by: Nicolin Chen <b42378@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-12-16dma: pl330: Alloc dma_parms for the dma deviceLars-Peter Clausen
In order to be able to set a maximum segment size for the device we need to allocate a dma_parameters struct for the device first. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-12-13dmaengine: fix sleep in atomicDan Williams
BUG: sleeping function called from invalid context at mm/mempool.c:203 in_atomic(): 1, irqs_disabled(): 0, pid: 43502, name: linbug no locks held by linbug/43502. CPU: 7 PID: 43502 Comm: linbug Not tainted 3.13.0-rc1+ #15 Hardware name: 0000000000000010 ffff88005ebd1878 ffffffff8172d512 ffff8801752bc1c0 ffff8801752bc1c0 ffff88005ebd1898 ffffffff8109d1f6 ffff88005f9a3c58 ffff880177f0f080 ffff88005ebd1918 ffffffff81161f43 ffff88005ebd18f8 Call Trace: [<ffffffff8172d512>] dump_stack+0x4e/0x68 [<ffffffff8109d1f6>] __might_sleep+0xe6/0x120 [<ffffffff81161f43>] mempool_alloc+0x93/0x170 [<ffffffff810c0c34>] ? mark_held_locks+0x74/0x140 [<ffffffff8118a826>] ? follow_page_mask+0x556/0x600 [<ffffffff814107ae>] dmaengine_get_unmap_data+0x2e/0x60 [<ffffffff81410f11>] dma_async_memcpy_pg_to_pg+0x41/0x1c0 [<ffffffff814110e0>] dma_async_memcpy_buf_to_pg+0x50/0x60 [<ffffffff81411bdc>] dma_memcpy_to_iovec+0xfc/0x190 [<ffffffff816163af>] dma_skb_copy_datagram_iovec+0x6f/0x2b0 Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-12-12dmaengine: mv_xor: fix oops when channels fail to initialiseRussell King
When a channel fails to initialise, we error out and clean up any previously unregistered channels by walking the entire xordev->channels array. Unfortunately, there are paths which end up storing an error pointer in this array, which we then try and dereference in the cleanup code, which causes an oops. Fix this by avoiding writing invalid pointers to this array in the first place. Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-12-12dma: mv_xor: Use dmaengine_unmap_data for the self-testsEzequiel Garcia
The driver-specific unmap code was removed in: commit 54f8d501e842879143e867e70996574a54d1e130 Author: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Date: Fri Oct 18 19:35:32 2013 +0200 dmaengine: remove DMA unmap from drivers which had the side-effect of not unmapping the self-test mappings. Fix this by using dmaengine_unmap_data in the self-test routines. In addition, since dmaengine_unmap() assumes that all mappings were created with dma_map_page, this commit changes the single mapping to a page mapping to avoid an incorrect unmapping of the memcpy self-test. The allocation could be changed to be alloc_page(), but sticking to kmalloc results in a less intrusive patch. The size of the test buffer is increased, since dma_map_page() seem to fail when the source and destination pages are the same page. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>