summaryrefslogtreecommitdiffstats
path: root/drivers/edac
AgeCommit message (Collapse)Author
2011-01-13Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-07Merge branch 'mce-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp * 'mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, MCE: Fix NB error formatting EDAC, MCE: Use BIT_64() to eliminate warnings on 32-bit EDAC, MCE: Enable MCE decoding on F15h EDAC, MCE: Allow F15h bank 6 MCE injection EDAC, MCE: Shorten error report formatting EDAC, MCE: Overhaul error fields extraction macros EDAC, MCE: Add F15h FP MCE decoder EDAC, MCE: Add F15 EX MCE decoder EDAC, MCE: Add an F15h NB MCE decoder EDAC, MCE: No F15h LS MCE decoder EDAC, MCE: Add F15h CU MCE decoder EDAC, MCE: Add F15h IC MCE decoder EDAC, MCE: Add F15h DC MCE decoder EDAC, MCE: Select extended error code mask
2011-01-07EDAC, MCE: Fix NB error formattingBorislav Petkov
Minor formatting fixup since the information which core was associated with the MCE is not always valid. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: Use BIT_64() to eliminate warnings on 32-bitRandy Dunlap
Building for X86_32 produces shift count warnings, so use BIT_64() to eliminate the warnings. drivers/edac/mce_amd.c:778: warning: left shift count >= width of type drivers/edac/mce_amd.c:778: warning: left shift count >= width of type Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Doug Thompson <dougthompson@xmission.com> Cc: bluesmoke-devel@lists.sourceforge.net Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: Enable MCE decoding on F15hBorislav Petkov
Now that everything is inplace, enable MCE decoding on F15h. Make initcall routine a bit more readable. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: Allow F15h bank 6 MCE injectionBorislav Petkov
F15h adds a sixth MCE bank: adjust bank number check in the injection code. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: Shorten error report formattingBorislav Petkov
Shorten up MCi_STATUS flags and add BD's new deferred and poison types. Also, simplify formatting. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: Overhaul error fields extraction macrosBorislav Petkov
Make macro names shorter thus making code shorter and more clear. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: Add F15h FP MCE decoderBorislav Petkov
Add decoder for FP MCEs. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: Add F15 EX MCE decoderBorislav Petkov
Integrate the single FIROB signature into an expanded table along with the new BD MCE types. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: Add an F15h NB MCE decoderBorislav Petkov
by (almost) reusing the F10h one since the signatures are the same. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: No F15h LS MCE decoderBorislav Petkov
F15h BD doesn't generate LS MCEs so warn about it. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: Add F15h CU MCE decoderBorislav Petkov
MCE bank 2 is redefined from a BU to a CU (Combined Unit) bank on F15h. Add a decoder function for CU MCEs. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: Add F15h IC MCE decoderBorislav Petkov
Add support for decoding F15h IC MCEs. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: Add F15h DC MCE decoderBorislav Petkov
Add a decoder for F15h DC MCEs to support the new types of DC MCEs introduced by the BD microarchitecture. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC, MCE: Select extended error code maskBorislav Petkov
F15h enlarges the extended error code of an MCE to a 5-bit field (MCi_STATUS[20:16]). Add a mask variable which default 0xf is overridden on F15h. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Disable DRAM ECC injection on K8Borislav Petkov
K8 does not allow for an atomic RMW to a cacheline as F10h does so disable the error injection interface for it. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07EDAC: Fixup scrubrate manipulationBorislav Petkov
Make the ->{get|set}_sdram_scrub_rate return the actual scrub rate bandwidth it succeeded setting and remove superfluous arg pointer used for that. A negative value returned still means that an error occurred while setting the scrubrate. Document this for future reference. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Remove two-stage initializationBorislav Petkov
Now that all prerequisites are in place, drop the two-stage driver instances initialization in favor of the following simple init sequence: 1. Probe PCI device: we only test ECC capabilities here and if none exit early. 2. If the hw supports ECC and it is/can be enabled, we init the per-node instance. Remove "amd64_" prefix from static functions touched, while at it. There actually should be no visible functional change resulting from this patch. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Check ECC capabilities initiallyBorislav Petkov
Rework the code to check the hardware ECC capabilities at PCI probing time. We do all further initialization only if we actually can/have ECC enabled. While at it: 0. Fix function naming. 1. Simplify/clarify debug output. 2. Remove amd64_ prefix from the static functions 3. Reorganize code. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Carve out ECC-related hw settingsBorislav Petkov
This is in preparation for the init path reorganization where we want only to 1) test whether a particular node supports ECC 2) can it be enabled and only then do the necessary allocation/initialization. For that, we need to decouple the ECC settings of the node from the instance's descriptor. The should be no functional change introduced by this patch. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Remove PCI ECS enabling functionsBorislav Petkov
PCI ECS is being enabled by default since 2.6.26 on AMD so this code is just superfluous now, remove it. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Remove explicit Kconfig PCI dependencyBorislav Petkov
AMD_NB pulls in the dependency on PCI. Clarify/fix help text while at it. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Allocate driver instances dynamicallyBorislav Petkov
Remove static allocation in favor of dynamically allocating space for as many driver instances as northbridges present on the system. There should be no functional change resulting from this patch. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Rework printk macrosBorislav Petkov
Add a macro per printk level, shorten up error messages. Add relevant information to KERN_INFO level. No functional change. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Rename CPU PCI devicesBorislav Petkov
Rename variables representing PCI devices to their BKDG names for faster search and shorter, clearer code. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Concentrate per-family init even moreBorislav Petkov
Move the remaining per-family init code into the proper place and simplify the rest of the initialization. Reorganize error handling in amd64_init_one_instance(). Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Cleanup the CPU PCI device reservationBorislav Petkov
Shorten code and clarify comments, return proper -E* values on error. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Simplify CPU family detectionBorislav Petkov
Concentrate CPU family detection in the per-family init function. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Add per-family init functionBorislav Petkov
Run a per-family init function which does all the settings based on the family this driver instance is running on. Move the scrubrate calculation in it and simplify code. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Use cached extended CPU modelBorislav Petkov
... instead of computing it needlessly again. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-07amd64_edac: Remove F11h supportBorislav Petkov
F11h doesn't support DRAM ECC so whack it away. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-01-06Merge branch 'x86-amd-nb-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-amd-nb-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, cacheinfo: Cleanup L3 cache index disable support x86, amd-nb: Cleanup AMD northbridge caching code x86, amd-nb: Complete the rename of AMD NB and related code
2010-12-28i7core_edac: fix typos in commentsDavid Sterba
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-22Merge branch 'master' into for-nextJiri Kosina
Conflicts: MAINTAINERS arch/arm/mach-omap2/pm24xx.c drivers/scsi/bfa/bfa_fcpim.c Needed to update to apply fixes for which the old branch was too outdated.
2010-12-08amd64_edac: Fix interleaving checkBorislav Petkov
When matching error address to the range contained by one memory node, we're in valid range when node interleaving 1. is disabled, or 2. enabled and when the address bits we interleave on match the interleave selector on this node (see the "Node Interleaving" section in the BKDG for an enlightening example). Thus, when we early-exit, we need to reverse the compound logic statement properly. Cc: <stable@kernel.org> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2010-12-08EDAC: Correct MiB_TO_PAGES() macroAndrei Konovalov
This corrects the misprint introduced when moving '#if PAGE_SHIFT' from i7core_edac.c to edac_core.h (commit e9144601d364d5b81f3e63949337f8507eb58dca) Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Andrei Konovalov <akonovalov@mvista.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2010-12-08EDAC: Fix workqueue-related crashesBorislav Petkov
00740c58541b6087d78418cebca1fcb86dc6077d changed edac_core to un-/register a workqueue item only if a lowlevel driver supplies a polling routine. Normally, when we remove a polling low-level driver, we go and cancel all the queued work. However, the workqueue unreg happens based on the ->op_state setting, and edac_mc_del_mc() sets this to OP_OFFLINE _before_ we cancel the work item, leading to NULL ptr oops on the workqueue list. Fix it by putting the unreg stuff in proper order. Cc: <stable@kernel.org> #36.x Reported-and-tested-by: Tobias Karnat <tobias.karnat@googlemail.com> LKML-Reference: <1291201307.3029.21.camel@Tobias-Karnat> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2010-11-22EDAC, MCE: Fix edac_init_mce_inject error handlingAxel Lin
Otherwise, variable i will be -1 inside the latest iteration of the while loop. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2010-11-22EDAC: Remove deprecated kbuild goal definitionsTracey Dent
Change EDAC's Makefile to use <modules>-y instead of <modules>-objs because -objs is deprecated and not mentioned in Documentation/kbuild/makefiles.txt. [bp: Fixup commit message] [bp: Fixup indentation] Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2010-11-18x86, amd-nb: Cleanup AMD northbridge caching codeHans Rosenfeld
Support more than just the "Misc Control" part of the northbridges. Support more flags by turning "gart_supported" into a single bit flag that is stored in a flags member. Clean up related code by using a set of functions (amd_nb_num(), amd_nb_has_feature() and node_to_amd_nb()) instead of accessing the NB data structures directly. Reorder the initialization code and put the GART flush words caching in a separate function. Signed-off-by: Hans Rosenfeld <hans.rosenfeld@amd.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2010-11-18x86, amd-nb: Complete the rename of AMD NB and related codeHans Rosenfeld
Not only the naming of the files was confusing, it was even more so for the function and variable names. Renamed the K8 NB and NUMA stuff that is also used on other AMD platforms. This also renames the CONFIG_K8_NUMA option to CONFIG_AMD_NUMA and the related file k8topology_64.c to amdtopology_64.c. No functional changes intended. Signed-off-by: Hans Rosenfeld <hans.rosenfeld@amd.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2010-11-01tree-wide: fix comment/printk typosUwe Kleine-König
"gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already", Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-26Merge branch 'linux_next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core * 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core: (34 commits) i7core_edac: return -ENODEV when devices were already probed i7core_edac: properly terminate pci_dev_table i7core_edac: Avoid PCI refcount to reach zero on successive load/reload i7core_edac: Fix refcount error at PCI devices i7core_edac: it is safe to i7core_unregister_mci() when mci=NULL i7core_edac: Fix an oops at i7core probe i7core_edac: Remove unused member channels in i7core_pvt i7core_edac: Remove unused arg csrow from get_dimm_config i7core_edac: Reduce args of i7core_register_mci i7core_edac: Introduce i7core_unregister_mci i7core_edac: Use saved pointers i7core_edac: Check probe counter in i7core_remove i7core_edac: Call pci_dev_put() when alloc_i7core_dev() failed i7core_edac: Fix error path of i7core_register_mci i7core_edac: Fix order of lines in i7core_register_mci i7core_edac: Always do get/put for all devices i7core_edac: Introduce i7core_pci_ctl_create/release i7core_edac: Introduce free_i7core_dev i7core_edac: Introduce alloc_i7core_dev i7core_edac: Reduce args of i7core_get_onedevice ...
2010-10-24Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Update broken web addresses in arch directory. Update broken web addresses in the kernel. Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget Revert "Fix typo: configuation => configuration" partially ida: document IDA_BITMAP_LONGS calculation ext2: fix a typo on comment in ext2/inode.c drivers/scsi: Remove unnecessary casts of private_data drivers/s390: Remove unnecessary casts of private_data net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data drivers/infiniband: Remove unnecessary casts of private_data drivers/gpu/drm: Remove unnecessary casts of private_data kernel/pm_qos_params.c: Remove unnecessary casts of private_data fs/ecryptfs: Remove unnecessary casts of private_data fs/seq_file.c: Remove unnecessary casts of private_data arm: uengine.c: remove C99 comments arm: scoop.c: remove C99 comments Fix typo configue => configure in comments Fix typo: configuation => configuration Fix typo interrest[ing|ed] => interest[ing|ed] Fix various typos of valid in comments ... Fix up trivial conflicts in: drivers/char/ipmi/ipmi_si_intf.c drivers/usb/gadget/rndis.c net/irda/irnet/irnet_ppp.c
2010-10-24Merge branch 'devel' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/edac * 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/edac: (25 commits) i7300_edac: Properly initialize per-csrow memory size V4L/DVB: i7300_edac: better initialize page counts MAINTAINERS: Add maintainer for i7300-edac driver i7300-edac: CodingStyle cleanup i7300_edac: Improve comments i7300_edac: Cleanup: reorganize the file contents i7300_edac: Properly detect channel on CE errors i7300_edac: enrich FBD error info for corrected errors i7300_edac: enrich FBD error info for fatal errors i7300_edac: pre-allocate a buffer used to prepare err messages i7300_edac: Fix MTR x4/x8 detection logic i7300_edac: Make the debug messages coherent with the others i7300_edac: Cleanup: remove get_error_info logic i7300_edac: Add a code to cleanup error registers i7300_edac: Add support for reporting FBD errors i7300_edac: Properly detect the type of error correction i7300_edac: Detect if the device is on single mode i7300_edac: Adds detection for enhanced scrub mode on x8 i7300_edac: Clear the error bit after reading i7300_edac: Add error detection code for global errors ...
2010-10-24i7core_edac: return -ENODEV when devices were already probedMauro Carvalho Chehab
Due to the nature of i7core, we need to probe and attach all PCI devices used by this driver during the first time probe is called. However, PCI core will call the probe routine one time for each CPU socket. If we return -EINVAL to those calls, it would seem that the driver fails, when, in fact, there's no more devices left to initialize. Changing the return code to -ENODEV solves this issue. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-24i7core_edac: properly terminate pci_dev_tableMauro Carvalho Chehab
At pci_xeon_fixup(), it waits for a null-terminated table, while at i7core_get_all_devices, it just do a for 0..ARRAY_SIZE. As other tables are zero-terminated, change it to be terminate with 0 as well, and fixes a bug where it may be running out of the table elements. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-24i7core_edac: Avoid PCI refcount to reach zero on successive load/reloadMauro Carvalho Chehab
That's a nasty bug that took me a lot of time to track, and whose solution took just one line to solve. The best fragrances and the worse poisons are shipped on the smalest bottles. The drivers/pci/quick.c implements the pci_get_device function. The normal behavior is that you call it, the function returns you a pdev pointer and increment pdev->kobj.kref.refcount of the pci device. However, if you want to keep searching an object, you need to pass the previous pdev function to the search. When you use a not null pointer to pdev "from" field, pci_get_device will decrement pdev->kobj.kref.refcount, assuming that the driver won't be using the previous pdev. The solution is simple: we just need to call pci_dev_get() manually, for the pdev's that the driver will actually use. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-24i7core_edac: Fix refcount error at PCI devicesMauro Carvalho Chehab
Probably due to a bug or some testing logic at PCI level, device refcount for <bus>:00.0 device is decremented at the end of the pci_get_device, made by i7core_get_all_devices(). The fact is that the first versions of the driver relied on those devices to probe for Nehalem, but the current versions don't use it at all. So, let's just remove those devices from the driver, making it simpler and fixing the bug. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-20 18:33:27 +0000