summaryrefslogtreecommitdiffstats
path: root/drivers/firewire
AgeCommit message (Collapse)Author
2012-01-30firewire: ohci: disable MSI on Ricoh controllersStefan Richter
The PCIe device FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd FireWire Host Controller [1180:e832] (prog-if 10 [OHCI]) is unable to access attached FireWire devices when MSI is enabled but works if MSI is disabled. http://www.mail-archive.com/alsa-user@lists.sourceforge.net/msg28251.html Hence add the "disable MSI" quirks flag for this device, or in fact for safety and simplicity for all current (R5U230, R5U231, R5U240) and future Ricoh PCIe 1394 controllers. Reported-by: Stefan Thomas <kontrapunktstefan@googlemail.com> Cc: 2.6.36+ <stable@vger.kernel.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-01-26firewire: ohci: add reset packet quirk for SB AudigyClemens Ladisch
The Audigy's SB1394 controller is actually from Texas Instruments and has the same bus reset packet generation bug, so it needs the same quirk entry. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: 2.6.36+ <stable@vger.kernel.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2012-01-13module_param: make bool parameters really bool (drivers & misc)Rusty Russell
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-10-31drivers/firewire: Add export.h for EXPORT_SYMBOL to core-iso.cPaul Gortmaker
Ensure that the EXPORT_SYMBOL macros are present for when we clean up the "module.h" is everywhere situation, to prevent build failures. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-18firewire: ohci: fix isochronous DMA synchronizationClemens Ladisch
Add the dma_sync_single_* calls necessary to ensure proper cache synchronization for isochronous data buffers on non-coherent architectures. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-10-18firewire: ohci: work around selfID junk due to wrong gap countClemens Ladisch
If a device's firmware initiates a bus reset by setting the IBR bit in PHY register 1 without resetting the gap count field to 63 (and without having sent a PHY configuration packet beforehand), the gap count of this node will remain at the old value after the bus reset and thus be inconsistent with the gap count on all other nodes. The bus manager is supposed to detect the inconsistent gap count values in the self ID packets and correct them by issuing another bus reset. However, if the buggy device happens to be the cycle master, and if it sends a cycle start packet immediately after the bus reset (which is likely after a long bus reset), then the time between the end of the selfID phase and the start of the cycle start packet will be based on the too-small gap count value, so this gap will be too short to be detected as a subaction gap by the other nodes. This means that the cycle start packet will be assumed to be self ID data, and will be stored after the actual self ID quadlets in the self ID buffer. This garbage in the self ID buffer made firewire-core ignore all of the self ID data, and thus prevented the Linux bus manager from correcting the problem. Furthermore, because the bus reset handling was aborted completely, asynchronous transfers would be no longer handled correctly, and fw_run_transaction() would hang until the next bus reset. To fix this, make the detection of inconsistent self IDs more discriminating: If the invalid data in the self ID buffer looks like a cycle start packet, we can assume that the previous data in the buffer is correctly received self ID information, and process it normally. (We inspect only the first quadlet of the cycle start packet, because this value is different enough from any valid self ID quadlet, and many controllers do not store the cycle start packet in five quadlets because they expect self ID data to have an even number of quadlets.) This bug has been observed when a bus-powered DesktopKonnekt6 is switched off with its power button. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-10-09firewire: net: Use posted writesStephan Gatzka
Change memory region to ohci "middle address space". This effectively reduces the number of packets by 50%. [Stefan R.:] This eliminates 1394 ack packets and improved throughput by a few percent in some tests with an S400a connection with and without gap count optimization. Since firewire-net taxes the AR-req DMA unit of a FireWire controller much more than firewire-sbp2 (which uses the middle address space with PCI posted writes too), this commit also changes a related error printk into a ratelimited one as a precaution. Side note: The IPv4-over-1394 drivers of Mac OS X 10.4, Windows XP SP3, and the Thesycon 1394 bus driver for Windows all use the middle address space too. Signed-off-by: Stephan Gatzka <stephan@gatzka.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-10-09firewire: use clamp and min3 macrosStefan Richter
Use kernel.h's convenience macros. Also omit a printk that should never happen and won't matter much if it ever happened. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-10-09firewire: ohci: optimize TSB41BA3D detectionStefan Richter
Takes less source code and machine code, and less runtime with PHYs other than TSB41BA3D (e.g. TSB81BA3 with device ID 0x831304 which takes one instead of six read_paged_phy_reg now). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-10-09firewire: ohci: TSB41BA3D support tweaksStefan Richter
Fix: phy_reg_mutex must be held over the write/read_phy_reg pair which gets PHY port status. Only print to the log when a TSB41BA3D was found. By far most TSB82AA2 cards have a TSB81BA3, and firewire-ohci can keep quiet about that. Shorten some strings and comments. Change some whitespace. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-09-16firewire: ohci: Add support for TSB41BA3D phyStephan Gatzka
This patch implements a work around for the Texas Instruments PHY TSB41BA3D. This phy has a bug at least in combination with the TI LLCs TSB82AA2B and TSB12LV26. The selfid coming from the locally connected phy is not propagated into the selfid buffer of the OHCI (see http://www.ti.com/litv/pdf/sllz059 for details). The main idea is to construct the selfid ourselves. Signed-off-by: Stephan Gatzka <stephan@gatzka.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-09-16firewire: ohci: Move code from the bus reset tasklet into a workqueueStephan Gatzka
Code inside bus_reset_work may now sleep. This is a prerequisite to support a phy from Texas Instruments cleanly. The patch to support this phy will be submitted later. Signed-off-by: Stephan Gatzka <stephan@gatzka.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-09-16firewire: sbp2: fold two functions into oneStefan Richter
sbp2_release_target() is folded into its primary user, sbp2_remove(). The only other caller, a failure path in sbp2_probe(), now uses sbp2_remove(). This adds unnecessary cancel_delayed_work_sync() calls to that failure path but results in less code and text. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-09-16firewire: sbp2: move some code to more sensible placesStefan Richter
Implement sbp2_queue_work(), which is now a very simple accessor to one of the struct sbp2_logical_unit members, right after the definition of struct sbp2_logical_unit. Put the sbp2_reconnect() implementation right after the sbp2_login() implementation. They are both part of the SBP-2 access protocol. Implement the driver methods sbp2_probe(), spp2_update(), sbp2_remove() in this order, reflecting the lifetime of an SBP-2 target. Place the sbp2_release_target() implementation right next to sbp2_remove() which is its primary user, and after sbp2_probe() which is the counterpart to sbp2_release_target(). There are no changes to the implementations here, or at least not meant to be. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-09-16firewire: sbp2: remove obsolete reference countingStefan Richter
Since commit 0278ccd9d53e07c4e699432b2fed9de6c56f506c "firewire: sbp2: fix panic after rmmod with slow targets", the lifetime of an sbp2_target instance does no longer extent past the return of sbp2_remove(). Therefore it is no longer necessary to call fw_unit_get/put() and fw_device_get/put() in sbp2_probe/remove(). Furthermore, said commit also ensures that lu->work is not going to be executed or requeued at a time when the sbp2_target is no longer in use. Hence there is no need for sbp2_target reference counting for lu->work. Other concurrent contexts: - Processes which access the sysfs of the SCSI host device or of one of its subdevices are safe because these interfaces are all removed by scsi_remove_device/host() in sbp2_release_target(). - SBP-2 command block ORB transactions are finished when scsi_remove_device() in sbp2_release_target() returns. - SBP-2 management ORB transactions are finished when cancel_delayed_work_sync(&lu->work) before sbp2_release_target() returns. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-09-16firewire: ohci: add no MSI quirk for O2Micro controllerMing Lei
This fixes https://bugs.launchpad.net/ubuntu/+source/linux/+bug/801719 . An O2Micro PCI Express FireWire controller, "FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Device [1217:11f7] (rev 05)" which is a combination device together with an SDHCI controller and some sort of storage controller, misses SBP-2 status writes from an attached FireWire HDD. This problem goes away if MSI is disabled for this FireWire controller. The device reportedly does not require QUIRK_CYCLE_TIMER. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (amended changelog) Cc: <stable@kernel.org>
2011-08-27Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: sbp2: fix panic after rmmod with slow targets
2011-08-23firewire: sbp2: fix panic after rmmod with slow targetsChris Boot
If firewire-sbp2 starts a login to a target that doesn't complete ORBs in a timely manner (and has to retry the login), and the module is removed before the operation times out, you end up with a null-pointer dereference and a kernel panic. [SR: This happens because sbp2_target_get/put() do not maintain module references. scsi_device_get/put() do, but at occasions like Chris describes one, nobody holds a reference to an SBP-2 sdev.] This patch cancels pending work for each unit in sbp2_remove(), which hopefully means there are no extra references around that prevent us from unloading. This fixes my crash. Signed-off-by: Chris Boot <bootc@bootc.net> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-08-21Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: core: handle ack_busy when fetching the Config ROM
2011-08-15Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: ohci: fix DMA unmapping in an error path firewire: cdev: fix 32 bit userland on 64 bit kernel compat corner cases
2011-08-13firewire: core: handle ack_busy when fetching the Config ROMStefan Richter
Some older Panasonic made camcorders (Panasonic AG-EZ30 and NV-DX110, Grundig Scenos DLC 2000) reject requests with ack_busy_X if a request is sent immediately after they sent a response to a prior transaction. This causes firewire-core to fail probing of the camcorder with "giving up on config rom for node id ...". Consequently, programs like kino or dvgrab are unaware of the presence of a camcorder. Such transaction failures happen also with the ieee1394 driver stack (of the 2.4...2.6 kernel series until 2.6.36 inclusive) but with a lower likelihood, such that kino or dvgrab are generally able to use these camcorders via the older driver stack. The cause for firewire-ohci's or firewire-core's worse behavior is not yet known. Gap count optimization in firewire-core is not the cause. Perhaps the slightly higher latency of transaction completion in the older stack plays a role. (ieee1394: AR-resp DMA context tasklet -> packet completion ktread -> user process; firewire-core: tasklet -> user process.) This change introduces retries and delays after ack_busy_X into firewire-core's Config ROM reader, such that at least firewire-core's probing and /dev/fw* creation are successful. This still leaves the problem that userland processes are facing transaction failures. gscanbus's built-in retry routines deal with them successfully, but neither kino's nor dvgrab's do ever succeed. But at least DV capture with "dvgrab -noavc -card 0" works now. Live video preview in kino works too, but not actual capture. One way to prevent Configuration ROM reading failures in application programs is to modify libraw1394 to synthesize read responses by means of firewire-core's Configuration ROM cache. This would only leave CMP and FCP transaction failures as a potential problem source for applications. Reported-and-tested-by: Thomas Seilund <tps@netmaster.dk> Reported-and-tested-by: René Fritz <rene@colorcube.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-08-12firewire: ohci: fix DMA unmapping in an error pathStefan Richter
If request_irq failed, we would pass wrong arguments to dma_free_coherent. https://bugzilla.redhat.com/show_bug.cgi?id=728185 Reported-by: Mads Kiilerich Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-08-12firewire: cdev: fix 32 bit userland on 64 bit kernel compat corner casesStefan Richter
Clemens points out that we need to use compat_ptr() in order to safely cast from u64 to addresses of a 32-bit usermode client. Before, our conversion went wrong - in practice if the client cast from pointer to integer such that sign-extension happened, (libraw1394 and libdc1394 at least were not doing that, IOW were not affected) or - in theory on s390 (which doesn't have FireWire though) and on the tile architecture, regardless of what the client does. The bug would usually be observed as the initial get_info ioctl failing with "Bad address" (EFAULT). Reported-by: Carl Karsten <carl@personnelware.com> Reported-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: document the sysfs ABIs firewire: cdev: ABI documentation enhancements firewire: cdev: prevent race between first get_info ioctl and bus reset event queuing firewire: cdev: return -ENOTTY for unimplemented ioctls, not -EINVAL firewire: ohci: skip soft reset retries after card ejection firewire: ohci: fix PHY reg access after card ejection firewire: ohci: add a comment on PHY reg access serialization firewire: ohci: reduce potential context_stop latency firewire: ohci: remove superfluous posted write flushes firewire: net: replacing deprecated __attribute__((packed)) with __packed
2011-07-16firewire: cdev: prevent race between first get_info ioctl and bus reset ↵Stefan Richter
event queuing Between open(2) of a /dev/fw* and the first FW_CDEV_IOC_GET_INFO ioctl(2) on it, the kernel already queues FW_CDEV_EVENT_BUS_RESET events to be read(2) by the client. The get_info ioctl is practically always issued right away after open, hence this condition only occurs if the client opens during a bus reset, especially during a rapid series of bus resets. The problem with this condition is twofold: - These bus reset events carry the (as yet undocumented) @closure value of 0. But it is not the kernel's place to choose closures; they are privat to the client. E.g., this 0 value forced from the kernel makes it unsafe for clients to dereference it as a pointer to a closure object without NULL pointer check. - It is impossible for clients to determine the relative order of bus reset events from get_info ioctl(2) versus those from read(2), except in one way: By comparison of closure values. Again, such a procedure imposes complexity on clients and reduces freedom in use of the bus reset closure. So, change the ABI to suppress queuing of bus reset events before the first FW_CDEV_IOC_GET_INFO ioctl was issued by the client. Note, this ABI change cannot be version-controlled. The kernel cannot distinguish old from new clients before the first FW_CDEV_IOC_GET_INFO ioctl. We will try to back-merge this change into currently maintained stable/ longterm series, and we only document the new behaviour. The old behavior is now considered a kernel bug, which it basically is. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: <stable@kernel.org>
2011-07-16firewire: cdev: return -ENOTTY for unimplemented ioctls, not -EINVALStefan Richter
On Jun 27 Linus Torvalds wrote: > The correct error code for "I don't understand this ioctl" is ENOTTY. > The naming may be odd, but you should think of that error value as a > "unrecognized ioctl number, you're feeding me random numbers that I > don't understand and I assume for historical reasons that you tried to > do some tty operation on me". [...] > The EINVAL thing goes way back, and is a disaster. It predates Linux > itself, as far as I can tell. You'll find lots of man-pages that have > this line in it: > > EINVAL Request or argp is not valid. > > and it shows up in POSIX etc. And sadly, it generally shows up > _before_ the line that says > > ENOTTY The specified request does not apply to the kind of object > that the descriptor d references. > > so a lot of people get to the EINVAL, and never even notice the ENOTTY. [...] > At least glibc (and hopefully other C libraries) use a _string_ that > makes much more sense: strerror(ENOTTY) is "Inappropriate ioctl for > device" So let's correct this in the <linux/firewire-cdev.h> ABI while it is still young, relative to distributor adoption. Side note: We return -ENOTTY not only on _IOC_TYPE or _IOC_NR mismatch, but also on _IOC_SIZE mismatch. An ioctl with an unsupported size of argument structure can be seen as an unsupported version of that ioctl. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: <stable@kernel.org>
2011-07-14Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/bluetooth/l2cap_core.c
2011-07-13net: Push protocol type directly down to header_ops->cache()David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-10firewire: ohci: do not bind to Pinnacle cards, avert panicStefan Richter
When firewire-ohci is bound to a Pinnacle MovieBoard, eventually a "Register access failure" is logged and an interrupt storm or a kernel panic happens. https://bugzilla.kernel.org/show_bug.cgi?id=36622 Until this is sorted out (if that is going to succeed at all), let's just prevent firewire-ohci from touching these devices. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: <stable@kernel.org>
2011-07-09firewire: ohci: skip soft reset retries after card ejectionStefan Richter
The software reset in firewire-ohci's pci_remove does not have a great prospect of success if the card was already physically removed at this point. So let's skip the 500 ms that were spent in retries here. Also, replace a defined constant by its open-coded value. This is not a constant from a specification but an arbitrarily chosen retry limit. It was only used in this single place. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-07-09firewire: ohci: fix PHY reg access after card ejectionStefan Richter
Detect and handle ejection of FireWire CardBus cards in PHY register accesses: - The last attempt of firewire-core to reset the bus during shutdown caused a spurious "firewire_ohci: failed to write phy reg" error message in the log. Skip this message as well as the prior retry loop that needlessly took 100 milliseconds. - In the unlikely case that a PHY register was read right after card ejection, a bogus value was obtained and possibly acted upon. Instead, fail the read attempt. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-07-09firewire: ohci: add a comment on PHY reg access serializationStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-07-09firewire: ohci: reduce potential context_stop latencyStefan Richter
Stopping an isochronous reception DMA context takes two loop iterations in context_stop on several controllers (JMicron, NEC, VIA). But there is no extra delay necessary between these two reg_read trials; the MMIO reads themselves are slow enough. Hence bring back the behavior from before commit dd6254e5c0efe01ad255188898cb3dadf98cb56d "firewire: ohci: remove superfluous posted write flushes" on these controllers by means of an "if (i)" condition. Isochronous context stop is performed in preemptible contexts (and only rarely), hence this change is of little impact. (Besides, Agere and TI controllers always, or almost always, have the context stopped already at the first ContextControl read.) More important is asynchronous transmit context stop, which is performed while local interrupts are disabled (on the two AT DMAs in bus_reset_tasklet, i.e. after a self-ID-complete event). In my experience with several controllers, tested with a usermode AT-request transmitter as well as with FTP transmission over firewire-net, the AT contexts were luckily already stopped at the first ContextControl read, i.e. never required another MMIO read let alone mdelay. A possible explanation for this is that the controllers which I tested perhaps stop AT DMA before they perform the self-ID reception DMA. But we cannot be sure about that and should keep the interrupts-disabled busy loop as short as possible. Hence, query the ContextControl register in 1000 udelay(10) intervals instead of 10 udelay(1000) intervals. I understand from an estimation by Clemens Ladisch that stopping a busy DMA context should take microseconds or at worst tens of microseconds, not milliseconds. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-06-02firewire: ohci: remove superfluous posted write flushesClemens Ladisch
The call to flush_writes() in context_stop() is superfluous because another register read is done immediately afterwards. The call to flush_writes() in ar_context_run() does not need to be done individually for each AR context, so move it to ohci_enable(). This also makes ohci_enable() clearer because it no longer depends on a side effect of ar_context_run() to flush its own register writes. Finally, the setting of a context's wake bit does not need to be flushed because neither the driver logic nor the API require the CPU to wait for this action. This removes the last MMIO reads from the packet queueing code paths. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-06-02firewire: net: replacing deprecated __attribute__((packed)) with __packedAugust Lilleaas
Fixing a deprecation, replacing __attribute__((packed)) with __packed. It was deprecated for portability, specifically to avoid GCC specific code. See commit 82ddcb040570411fc2d421d96b3e69711c670328. Signed-off-by: August Lilleaas <august@augustl.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (added include compiler.h)
2011-05-10firewire: sbp2: parallelize login, reconnect, logoutStefan Richter
The struct sbp2_logical_unit.work items can all be executed in parallel but are not reentrant. Furthermore, reconnect or re-login work must be executed in a WQ_MEM_RECLAIM workqueue. Hence replace the old single-threaded firewire-sbp2 workqueue by a concurrency-managed but non-reentrant workqueue with rescuer. firewire-core already maintains one, hence use this one. In earlier versions of this change, I observed occasional failures of parallel INQUIRY to an Initio INIC-2430 FireWire 800 to dual IDE bridge. More testing indicates that parallel INQUIRY is not actually a problem, but too quick successions of logout and login + INQUIRY, e.g. a quick sequence of cable plugout and plugin, can result in failed INQUIRY. This does not seem to be something that should or could be addressed by serialization. Another dual-LU device to which I currently have access to, an OXUF924DSB FireWire 800 to dual SATA bridge with firmware from MacPower, has been successfully tested with this too. This change is beneficial to environments with two or more FireWire storage devices, especially if they are located on the same bus. Management tasks that should be performed as soon and as quickly as possible, especially reconnect, are no longer held up by tasks on other devices that may take a long time, especially login with INQUIRY and sd or sr driver probe. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-05-10firewire: sbp2: octlet AT payloads can be stack-allocatedStefan Richter
We do not need slab allocations for ORB pointer write transactions anymore in order to satisfy streaming DMA mapping constraints, thanks to commit da28947e7e36 "firewire: ohci: avoid separate DMA mapping for small AT payloads". (Besides, the slab-allocated buffers that firewire-sbp2 used to provide for 8-byte write requests were still not fully portable since they shared a cacheline with unrelated CPU-accessed data.) Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-05-10firewire: sbp2: omit Scsi_Host lock from queuecommandStefan Richter
firewire-sbp2 already takes care for internal serialization where required (ORB list accesses), and it does not use cmd->serial_number internally. Hence it is safe to not grab the shost lock around queuecommand. While we are at housekeeping, drop a redundant struct member: sbp2_command_orb.done is set once in a hot path and dereferenced once in a hot path. We can as well dereference sbp2_command_orb.cmd->scsi_done instead. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-05-10firewire: core: use non-reentrant workqueue with rescuerStefan Richter
firewire-core manages the following types of work items: fw_card.br_work: - resets the bus on a card and possibly sends a PHY packet before that - does not sleep for long or not at all - is scheduled via fw_schedule_bus_reset() by - firewire-ohci's pci_probe method - firewire-ohci's set_config_rom method, called by kernelspace protocol drivers and userspace drivers which add/remove Configuration ROM descriptors - userspace drivers which use the bus reset ioctl - itself if the last reset happened less than 2 seconds ago fw_card.bm_work: - performs bus management duties - usually does not (but may in corner cases) sleep for long - is scheduled via fw_schedule_bm_work() by - firewire-ohci's self-ID-complete IRQ handler tasklet - firewire-core's fw_device.work instances whenever the root node device was (successfully or unsuccessfully) discovered, refreshed, or rediscovered - itself in case of resource allocation failures or in order to obey the 125ms bus manager arbitration interval fw_device.work: - performs node probe, update, shutdown, revival, removal; including kernel driver probe, update, shutdown and bus reset notification to userspace drivers - usually sleeps moderately long, in corner cases very long - is scheduled by - firewire-ohci's self-ID-complete IRQ handler tasklet via the core's fw_node_event - firewire-ohci's pci_remove method via core's fw_destroy_nodes/ fw_node_event - itself during retries, e.g. while a node is powering up iso_resource.work: - accesses registers at the Isochronous Resource Manager node - usually does not (but may in corner cases) sleep for long - is scheduled via schedule_iso_resource() by - the owning userspace driver at addition and removal of the resource - firewire-core's fw_device.work instances after bus reset - itself in case of resource allocation if necessary to obey the 1000ms reallocation period after bus reset fw_card.br_work instances should not, and instances of the others must not, be executed in parallel by multiple CPUs -- but were not protected against that. Hence allocate a non-reentrant workqueue for them. fw_device.work may be used in the memory reclaim path in case of SBP-2 device updates. Hence we need a workqueue with rescuer and cannot use system_nrt_wq. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Reviewed-by: Tejun Heo <tj@kernel.org>
2011-05-10firewire: optimize iso queueing by setting wake only after the last packetClemens Ladisch
When queueing iso packets, the run time is dominated by the two MMIO accesses that set the DMA context's wake bit. Because most drivers submit packets in batches, we can save much time by removing all but the last wakeup. The internal kernel API is changed to require a call to fw_iso_context_queue_flush() after a batch of queued packets. The user space API does not change, so one call to FW_CDEV_IOC_QUEUE_ISO must specify multiple packets to take advantage of this optimization. In my measurements, this patch reduces the time needed to queue fifty skip packets from userspace to one sixth on a 2.5 GHz CPU, or to one third at 800 MHz. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-05-10firewire: octlet AT payloads can be stack-allocatedStefan Richter
We do not need slab allocations anymore in order to satisfy streaming DMA mapping constraints, thanks to commit da28947e7e36 "firewire: ohci: avoid separate DMA mapping for small AT payloads". (Besides, the slab-allocated buffers that firewire-core, firewire-sbp2, and firedtv used to provide for 8-byte write and lock requests were still not fully portable since they crossed cacheline boundaries or shared a cacheline with unrelated CPU-accessed data. snd-firewire-lib got this aspect right by using an extra kmalloc/ kfree just for the 8-byte transaction buffer.) This change replaces kmalloc'ed lock transaction scratch buffers in firewire-core, firedtv, and snd-firewire-lib by local stack allocations. Perhaps the most notable result of the change is simpler locking because there is no need to serialize usages of preallocated per-device buffers anymore. Also, allocations and deallocations are simpler. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Clemens Ladisch <clemens@ladisch.de>
2011-05-10Merge tag 'v2.6.39-rc7'Stefan Richter
in order to pull in changes in drivers/media/dvb/firewire/ and sound/firewire/.
2011-05-04Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: Fix for broken configrom updates in quick succession
2011-05-02firewire: Fix for broken configrom updates in quick successionB.J. Buchalter
Current implementation of ohci_set_config_rom() uses a deferred bus reset via fw_schedule_bus_reset(). If clients add multiple unit descriptors to the config_rom in quick succession, the deferred bus reset may not have fired before succeeding update requests have come in. This can lead to an incorrect partial update of the config_rom for both addition and removal of config_rom descriptors, as the ohci_set_config_rom() routine will return -EBUSY if a previous pending update has not been completed yet; the requested update just gets dropped on the floor. This patch recognizes that the "in-flight" update can be modified until it has been processed by the bus-reset, and the locking in the bus_reset_tasklet ensures that the update is done atomically with respect to modifications made by ohci_set_config_rom(). The -EBUSY error case is simply removed. [Stefan R: The bug always existed at least theoretically. But it became easy to trigger since 2.6.36 commit 02d37bed188c "firewire: core: integrate software-forced bus resets with bus management" which introduced long mandatory delays between janitorial bus resets.] Signed-off-by: Benjamin Buchalter <bj@mhlabs.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (trivial style changes) Cc: <stable@kernel.org> # 2.6.36.y and newer
2011-04-19firewire: ohci: optimize find_branch_descriptor()Clemens Ladisch
When z==2, the condition "key == 2" is superfluous because it cannot occur without "b == 3", as a descriptor with b!=3 and key==2 would be an OUTPUT_MORE_IMMEDIATE descriptor which cannot be used alone. Also remove magic numbers and needless computations on the b field. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-04-19firewire: ohci: avoid separate DMA mapping for small AT payloadsClemens Ladisch
For AT packet payloads of up to eight bytes, we have enough unused space in the DMA descriptors list so that we can put a copy of the payload there and thus avoid having to create a separate streaming DMA mapping for the payload buffer. In a CPU-bound microbenchmark that just sends 8-byte packets, bandwidth was measured to increase by 5.7 %, from 1009 KB/s to 1067 KB/s. In practice, the only performance-sensitive usage of small asynchronous packets is the SBP-2 driver's write to the ORB_POINTER register during SCSI command submission. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-04-19firewire: ohci: do not start DMA contexts before link is enabledClemens Ladisch
OHCI 1.1 5.7.3 not only forbids enabling or starting any DMA contexts before the linkEnable bit is set, but also explicitly warns of undefined behaviour if this order is violated. Don't violate it then. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>