summaryrefslogtreecommitdiffstats
path: root/drivers/gpio/gpio-pl061.c
AgeCommit message (Collapse)Author
2013-01-22gpio: pl061: set initcall level to module initHaojian Zhuang
Replace subsys initcall by module initcall level. Since pinctrl driver is already launched before gpio driver. It's unnecessary to set gpio driver in subsys init call level. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Tested-by: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-30gpio/pl061: remove old commentBaruch Siach
Since 3ab524754 (gpio: pl061: convert to use generic irq chip) we only have one spinlock in struct pl061_gpio. Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-10-15gpio/gpio-pl061: Covert to use devm_* functionsTobias Klauser
Use the devm_* family of functions during probe to reduce the error handling code footprint. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-02-16gpio/gpio-pl061: No need of thaw and poweroff routines for hibernateViresh Kumar
pl061 uses same routines for suspend/freeze/poweroff and resume/thaw/restore. We are only saving and restoring register values on these routines. During hibernation, in freeze() we take a snapshot of gpio registers. In thaw() we don't actually need to restore these registers, as power was never shut down till now. Similarly, in poweroff() we don't need to take snapshot of these registers again, as it was done during freeze() and by now the image is already saved on disk. This patch passes poweroff() and thaw() routines as NULL to avoid this extra work done. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-01-14Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
2nd round of GPIO changes for v3.3 merge window * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: GPIO: sa1100: implement proper gpiolib gpio_to_irq conversion gpio: pl061: remove combined interrupt gpio: pl061: convert to use generic irq chip GPIO: add bindings for managed devices ARM: realview: convert pl061 no irq to 0 instead of -1 gpio: pl061: convert to use 0 for no irq gpio: pl061: use chained_irq_* functions in irq handler GPIO/pl061: Add suspend resume capability drivers/gpio/gpio-tegra.c: use devm_request_and_ioremap
2012-01-06Merge branch 'amba-modalias' of ↵Linus Torvalds
git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'amba-modalias' of git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: sound: aaci: Enable module alias autogeneration for AMBA drivers watchdog: sp805: Enable module alias autogeneration for AMBA drivers fbdev: amba: Enable module alias autogeneration for AMBA drivers serial: pl011: Enable module alias autogeneration for AMBA drivers serial: pl010: Enable module alias autogeneration for AMBA drivers spi: pl022: Enable module alias autogeneration for AMBA drivers rtc: pl031: Enable module alias autogeneration for AMBA drivers rtc: pl030: Enable module alias autogeneration for AMBA drivers mmc: mmci: Enable module alias autogeneration for AMBA drivers input: ambakmi: Enable module alias autogeneration for AMBA drivers gpio: pl061: Enable module alias autogeneration for AMBA drivers dmaengine: pl330: Enable module alias autogeneration for AMBA drivers dmaengine: pl08x: Enable module alias autogeneration for AMBA drivers hwrng: nomadik: Enable module alias autogeneration for AMBA drivers ARM: amba: Auto-generate AMBA driver module aliases during modpost ARM: amba: Move definition of struct amba_id to mod_devicetable.h
2012-01-05Merge branch 'gpio-for-grant' of git://sources.calxeda.com/kernel/linux into ↵Grant Likely
gpio/next Conflicts: drivers/gpio/gpio-pl061.c
2012-01-05gpio: pl061: remove combined interruptRob Herring
Drivers should not have a dependency on NR_IRQS. Doing so may break with SPARSE_IRQ enabled. As there are no in kernel users of the pl061 which have multiple instances with their interrupts combined to a single parent interrupt, remove this functionality. If this capability is needed later, it could be supported more cleanly by just using a devicetree property. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Viresh Kumar <viresh.kumar@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca>
2012-01-05gpio: pl061: convert to use generic irq chipRob Herring
Convert the pl061 irq_chip code to use the generic irq chip code. This has the side effect of using 32-bit accesses rather than 8-bit accesses to interrupt registers. The h/w TRM and testing seem to indicate this is fine. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-04gpio: pl061: convert to use 0 for no irqRob Herring
We don't want drivers using NO_IRQ, so remove its use. For now, 0 or -1 means no irq until platforms are converted to use 0. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.ml.walleij@gmail.com>
2012-01-04gpio: pl061: use chained_irq_* functions in irq handlerRob Herring
Use chained_irq_enter/exit helper functions instead of direct pointer accesses. This is needed for generic irq chip conversion. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.ml.walleij@gmail.com>
2012-01-04GPIO/pl061: Add suspend resume capabilityDeepak Sikri
This patch adds the suspend and resume operations in the driver. The patch ensures the data save and restore for the device registers during the suspend and resume operations respectively. Signed-off-by: Deepak Sikri <deepak.sikri@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-12-13gpio: pl061: drop extra check for NULL platform_dataRob Herring
In adding DT binding support, the check for NULL platform_data got added back in inadvertently, so remove it. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-11-22gpio: pl061: Enable module alias autogeneration for AMBA driversDave Martin
Signed-off-by: Dave Martin <dave.martin@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-26gpio: pl061: add DT binding supportRob Herring
This adds devicetree binding support to the ARM pl061 driver removing the platform_data dependency. When DT binding is used, the gpio numbering is assigned dynamically. For now, interrupts are not supported with DT until irqdomains learn dynamic irq assignment. Rather than add another case of -1, updating the driver to use NO_IRQ. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-06gpio: reorganize driversGrant Likely
Sort the gpio makefile and enforce the naming convention gpio-*.c for gpio drivers. v2: cleaned up filenames in Kconfig and comment blocks v3: fixup use of BASIC_MMIO to GENERIC_GPIO for mxc Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-31 11:33:02 +0000