summaryrefslogtreecommitdiffstats
path: root/drivers/gpio
AgeCommit message (Collapse)Author
2013-07-31gpio_msm: Fix build error due to missing err.hStephen Boyd
drivers/gpio/gpio-msm-v1.c: In function 'gpio_msm_v1_probe': drivers/gpio/gpio-msm-v1.c:656:2: error: implicit declaration of function 'IS_ERR' [-Werror=implicit-function-declaration] drivers/gpio/gpio-msm-v1.c:657:3: error: implicit declaration of function 'PTR_ERR' [-Werror=implicit-function-declaration] This driver failed to compile after commit 68515bb (gpio_msm: Convert to use devm_ioremap_resource, 2013-06-10). Acked-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-31Revert "gpio/omap: don't create an IRQ mapping for every GPIO on DT"Linus Walleij
This reverts commit 0e970cec05635adbe7b686063e2548a8e4afb8f4. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-31Revert "gpio/omap: auto request GPIO as input if used as IRQ via DT"Linus Walleij
This reverts commit b4419e1a15905191661ffe75ba2f9e649f5d565e. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-31Revert "gpio/omap: fix build error when OF_GPIO is not defined."Linus Walleij
This reverts commit 949eb1a4d29dc75e0b5b16b03747886b52ecf854. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-20drivers: gpio: msm: Fix the error condition for reading ngpioRohit Vaswani
of_property_read_u32 return 0 on success. The check was using a ! to return error. Fix the if condition. Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Pankaj Jangra <jangra.pankaj9@gmail.com> Cc: "Bird, Tim" <Tim.Bird@sonymobile.com> Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-20gpio/omap: fix build error when OF_GPIO is not defined.Javier Martinez Canillas
The OMAP GPIO driver check if the chip has an associated Device Tree node using the struct gpio_chip of_node member. But this is only build if CONFIG_OF_GPIO is defined which leads to the following error when using omap1_defconfig: linux/drivers/gpio/gpio-omap.c: In function 'omap_gpio_chip_init': linux/drivers/gpio/gpio-omap.c:1080:17: error: 'struct gpio_chip' has no member named 'of_node' linux/drivers/gpio/gpio-omap.c: In function 'omap_gpio_irq_map': linux/drivers/gpio/gpio-omap.c:1116:16: error: 'struct gpio_chip' has no member named 'of_node' Reported-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-20gpio/omap: auto request GPIO as input if used as IRQ via DTJavier Martinez Canillas
When an OMAP GPIO is used as an IRQ line, a call to gpio_request() has to be made to initialize the OMAP GPIO bank before a driver request the IRQ. Otherwise the call to request_irq() fails. Drives should not be aware of this neither care wether an IRQ line is a GPIO or not. They should just request the IRQ and this has to be handled by the irq_chip driver. With the current OMAP GPIO DT binding, if we define: gpio6: gpio@49058000 { compatible = "ti,omap3-gpio"; reg = <0x49058000 0x200>; interrupts = <34>; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; interrupt-parent = <&gpio6>; interrupts = <16 8>; The GPIO is correctly mapped as an IRQ but a call to gpio_request() is never made. Since a call to the custom IRQ domain .map function handler is made for each GPIO used as an IRQ, the GPIO can be setup and configured as input there automatically. Changes since v3: - Use bank->chip.of_node instead of_have_populated_dt() to check DT or legacy boot as suggested by Jean-Christophe PLAGNIOL-VILLARD - Add a comment that this is just a temporary solution until and that it has to be removed once is handled by the IRQ core. Changes since v2: - Only make the call to gpio_request_one() conditional in the DT case as suggested by Grant Likely. Changes since v1: - Split the irq domain mapping function handler and the GPIO request in two different patches. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-20gpio/omap: don't create an IRQ mapping for every GPIO on DTJavier Martinez Canillas
When a GPIO is defined as an interrupt line using Device Tree, a call to irq_create_of_mapping() is made that calls irq_create_mapping(). So, is not necessary to do the mapping for all OMAP GPIO lines and explicitly call irq_create_mapping() on the driver probe() when booting with Device Tree. Add a custom IRQ domain .map function handler that will be called by irq_create_mapping() to map the GPIO lines used as IRQ. This also allows to execute needed setup code such as configuring a GPIO as input and enabling the GPIO bank. Changes since v3: - Use bank->chip.of_node instead of_have_populated_dt() to check DT or legacy boot as suggested by Jean-Christophe PLAGNIOL-VILLARD Changes since v2: - Unconditionally do the IRQ setup in the .map() function and only call irq_create_mapping() in the gpio chip init to avoid code duplication as suggested by Grant Likely. Changes since v1: - Split the addition of the .map function handler and the automatic gpio request in two different patches. - Add GPIO IRQ setup logic to the irq domain mapping function. - Only call irq_create_mapping for every GPIO on legacy boot. - Only setup a GPIO IRQ on the .map function for DeviceTree boot. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-03Merge tag 'pm+acpi-3.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "This time the total number of ACPI commits is slightly greater than the number of cpufreq commits, but Viresh Kumar (who works on cpufreq) remains the most active patch submitter. To me, the most significant change is the addition of offline/online device operations to the driver core (with the Greg's blessing) and the related modifications of the ACPI core hotplug code. Next are the freezer updates from Colin Cross that should make the freezing of tasks a bit less heavy weight. We also have a couple of regression fixes, a number of fixes for issues that have not been identified as regressions, two new drivers and a bunch of cleanups all over. Highlights: - Hotplug changes to support graceful hot-removal failures. It sometimes is necessary to fail device hot-removal operations gracefully if they cannot be carried out completely. For example, if memory from a memory module being hot-removed has been allocated for the kernel's own use and cannot be moved elsewhere, it's desirable to fail the hot-removal operation in a graceful way rather than to crash the kernel, but currenty a success or a kernel crash are the only possible outcomes of an attempted memory hot-removal. Needless to say, that is not a very attractive alternative and it had to be addressed. However, in order to make it work for memory, I first had to make it work for CPUs and for this purpose I needed to modify the ACPI processor driver. It's been split into two parts, a resident one handling the low-level initialization/cleanup and a modular one playing the actual driver's role (but it binds to the CPU system device objects rather than to the ACPI device objects representing processors). That's been sort of like a live brain surgery on a patient who's riding a bike. So this is a little scary, but since we found and fixed a couple of regressions it caused to happen during the early linux-next testing (a month ago), nobody has complained. As a bonus we remove some duplicated ACPI hotplug code, because the ACPI-based CPU hotplug is now going to use the common ACPI hotplug code. - Lighter weight freezing of tasks. These changes from Colin Cross and Mandeep Singh Baines are targeted at making the freezing of tasks a bit less heavy weight operation. They reduce the number of tasks woken up every time during the freezing, by using the observation that the freezer simply doesn't need to wake up some of them and wait for them all to call refrigerator(). The time needed for the freezer to decide to report a failure is reduced too. Also reintroduced is the check causing a lockdep warining to trigger when try_to_freeze() is called with locks held (which is generally unsafe and shouldn't happen). - cpufreq updates First off, a commit from Srivatsa S Bhat fixes a resume regression introduced during the 3.10 cycle causing some cpufreq sysfs attributes to return wrong values to user space after resume. The fix is kind of fresh, but also it's pretty obvious once Srivatsa has identified the root cause. Second, we have a new freqdomain_cpus sysfs attribute for the acpi-cpufreq driver to provide information previously available via related_cpus. From Lan Tianyu. Finally, we fix a number of issues, mostly related to the CPUFREQ_POSTCHANGE notifier and cpufreq Kconfig options and clean up some code. The majority of changes from Viresh Kumar with bits from Jacob Shin, Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia, Arnd Bergmann, and Tang Yuantian. - ACPICA update A usual bunch of updates from the ACPICA upstream. During the 3.4 cycle we introduced support for ACPI 5 extended sleep registers, but they are only supposed to be used if the HW-reduced mode bit is set in the FADT flags and the code attempted to use them without checking that bit. That caused suspend/resume regressions to happen on some systems. Fix from Lv Zheng causes those registers to be used only if the HW-reduced mode bit is set. Apart from this some other ACPICA bugs are fixed and code cleanups are made by Bob Moore, Tomasz Nowicki, Lv Zheng, Chao Guan, and Zhang Rui. - cpuidle updates New driver for Xilinx Zynq processors is added by Michal Simek. Multidriver support simplification, addition of some missing kerneldoc comments and Kconfig-related fixes come from Daniel Lezcano. - ACPI power management updates Changes to make suspend/resume work correctly in Xen guests from Konrad Rzeszutek Wilk, sparse warning fix from Fengguang Wu and cleanups and fixes of the ACPI device power state selection routine. - ACPI documentation updates Some previously missing pieces of ACPI documentation are added by Lv Zheng and Aaron Lu (hopefully, that will help people to uderstand how the ACPI subsystem works) and one outdated doc is updated by Hanjun Guo. - Assorted ACPI updates We finally nailed down the IA-64 issue that was the reason for reverting commit 9f29ab11ddbf ("ACPI / scan: do not match drivers against objects having scan handlers"), so we can fix it and move the ACPI scan handler check added to the ACPI video driver back to the core. A mechanism for adding CMOS RTC address space handlers is introduced by Lan Tianyu to allow some EC-related breakage to be fixed on some systems. A spec-compliant implementation of acpi_os_get_timer() is added by Mika Westerberg. The evaluation of _STA is added to do_acpi_find_child() to avoid situations in which a pointer to a disabled device object is returned instead of an enabled one with the same _ADR value. From Jeff Wu. Intel BayTrail PCH (Platform Controller Hub) support is added to the ACPI driver for Intel Low-Power Subsystems (LPSS) and that driver is modified to work around a couple of known BIOS issues. Changes from Mika Westerberg and Heikki Krogerus. The EC driver is fixed by Vasiliy Kulikov to use get_user() and put_user() instead of dereferencing user space pointers blindly. Code cleanups are made by Bjorn Helgaas, Nicholas Mazzuca and Toshi Kani. - Assorted power management updates The "runtime idle" helper routine is changed to take the return values of the callbacks executed by it into account and to call rpm_suspend() if they return 0, which allows us to reduce the overall code bloat a bit (by dropping some code that's not necessary any more after that modification). The runtime PM documentation is updated by Alan Stern (to reflect the "runtime idle" behavior change). New trace points for PM QoS are added by Sahara (<keun-o.park@windriver.com>). PM QoS documentation is updated by Lan Tianyu. Code cleanups are made and minor issues are addressed by Bernie Thompson, Bjorn Helgaas, Julius Werner, and Shuah Khan. - devfreq updates New driver for the Exynos5-bus device from Abhilash Kesavan. Minor cleanups, fixes and MAINTAINERS update from MyungJoo Ham, Abhilash Kesavan, Paul Bolle, Rajagopal Venkat, and Wei Yongjun. - OMAP power management updates Adaptive Voltage Scaling (AVS) SmartReflex voltage control driver updates from Andrii Tseglytskyi and Nishanth Menon." * tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (162 commits) cpufreq: Fix cpufreq regression after suspend/resume ACPI / PM: Fix possible NULL pointer deref in acpi_pm_device_sleep_state() PM / Sleep: Warn about system time after resume with pm_trace cpufreq: don't leave stale policy pointer in cdbs->cur_policy acpi-cpufreq: Add new sysfs attribute freqdomain_cpus cpufreq: make sure frequency transitions are serialized ACPI: implement acpi_os_get_timer() according the spec ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan ACPI: Add CMOS RTC Operation Region handler support ACPI / processor: Drop unused variable from processor_perflib.c cpufreq: tegra: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: s3c64xx: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: omap: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: imx6q: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: exynos: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: dbx500: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: davinci: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: arm-big-little: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: powernow-k8: call CPUFREQ_POSTCHANGE notfier in error cases cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases ...
2013-07-03Merge tag 'gpio-for-v3.11-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "Here is a batch of GPIO changes for v3.11. I have agreed with Grant to take care of the pull requests for this development cycle. No special things are happening in the GPIO tree this time (nice with some calm) and I have been extra careful to do regression builds and it's well boiled in -next. GPIO changes for the v3.11 development cycle: - Incremental development for the Langwell (Atom SoC), Xilinx, ICH and RCAR drivers. - Cleanups from Jingoo Han, Axel Lin, Wei Jongjun, Wolfram Sang, Tushar Behera, Sachin Kamat and Yijing Wang" * tag 'gpio-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (35 commits) Gpio/trivial: replace numeric with standard PM state macros gpiolib: remove warnning of allocations with IRQs disabled gpio: grgpio: Staticize local symbols gpio-langwell: remove Withney point support gpio: ich: add GPO_BLINK support gpio-sta2x11: Convert to use devm_ioremap_resource gpio_msm: Convert to use devm_ioremap_resource gpio-rcar: Use OUTDT when reading GPIOs configured as output gpio-sta2x11: Fix potential NULL pointer dereference gpio/omap: omap_gpio_init_context stub must be inline gpio: msm-v1: Remove errant __devinit to fix compile gpio: devres: make comments proper GPIO: xilinx: Enable driver for Xilinx zynq DT: Add documentation for gpio-xilinx GPIO: xilinx: Use BIT macro GPIO: xilinx: Use __raw_readl/__raw_writel IO functions GPIO: xilinx: Add support for dual channel GPIO: xilinx: Simplify driver probe function gpio: sx150x: convert to use devm_* functions MAINTAINERS: add linux-gpio mailing list ...
2013-07-02Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core irq changes from Ingo Molnar: "The main changes: - generic-irqchip driver additions, cleanups and fixes - 3 new irqchip drivers: ARMv7-M NVIC, TB10x and Marvell Orion SoCs - irq_get_trigger_type() simplification and cross-arch cleanup - various cleanups, simplifications - documentation updates" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits) softirq: Use _RET_IP_ genirq: Add the generic chip to the genirq docbook genirq: generic-chip: Export some irq_gc_ functions genirq: Fix can_request_irq() for IRQs without an action irqchip: exynos-combiner: Staticize combiner_init irqchip: Add support for ARMv7-M NVIC irqchip: Add TB10x interrupt controller driver irqdomain: Use irq_get_trigger_type() to get IRQ flags MIPS: octeon: Use irq_get_trigger_type() to get IRQ flags arm: orion: Use irq_get_trigger_type() to get IRQ flags mfd: stmpe: use irq_get_trigger_type() to get IRQ flags mfd: twl4030-irq: Use irq_get_trigger_type() to get IRQ flags gpio: mvebu: Use irq_get_trigger_type() to get IRQ flags genirq: Add irq_get_trigger_type() to get IRQ flags genirq: Irqchip: document gcflags arg of irq_alloc_domain_generic_chips genirq: Set irq thread to RT priority on creation irqchip: Add support for Marvell Orion SoCs genirq: Add kerneldoc for irq_disable. genirq: irqchip: Add mask to block out invalid irqs genirq: Generic chip: Add linear irq domain support ...
2013-07-02Merge tag 'drivers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver specific changes from Arnd Bergmann: "These changes are all driver specific and cross over between arm-soc contents and some other subsystem, in these cases cpufreq, crypto, dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have these changes merged through arm-soc. As we proceed to untangle the dependencies between platform code and driver code, the amount of changes in this category is fortunately shrinking, for 3.11 we have 16 branches here and 101 non-merge changesets, the majority of which are for the stedma40 dma engine driver used in the ux500 platform. Cleaning up that code touches multiple subsystems, but gets rid of the dependency in the end. The mailbox code moved out from mach-omap2 to drivers/mailbox is an intermediate step and is still omap specific at the moment. Patches exist to generalize the subsystem and add other drivers with the same API, but those did not make it for 3.11." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits) crypto: ux500: use dmaengine_submit API crypto: ux500: use dmaengine_prep_slave_sg API crypto: ux500: use dmaengine_device_control API crypto: ux500/crypt: add missing __iomem qualifiers crypto: ux500/hash: add missing static qualifiers crypto: ux500/hash: use readl on iomem addresses dmaengine: ste_dma40: Declare memcpy config as static ARM: ux500: Remove mop500_snowball_ethernet_clock_enable() ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO ARM: ux500: Provide a AB8500 GPIO Device Tree node gpio: rcar: fix gpio_rcar_of_table gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections gpio-rcar: Reference core gpio documentation in the DT bindings clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2 ARM: dts: Update Samsung I2S documentation ARM: dts: add clock provider information for i2s controllers in Exynos5250 ARM: dts: add Exynos audio subsystem clock controller node clk: samsung: register audio subsystem clocks using common clock framework ARM: dts: use #include for all device trees for Samsung pinctrl: s3c24xx: use correct header for chained_irq functions ...
2013-07-02Merge tag 'soc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC specific changes from Arnd Bergmann: "These changes are all to SoC-specific code, a total of 33 branches on 17 platforms were pulled into this. Like last time, Renesas sh-mobile is now the platform with the most changes, followed by OMAP and EXYNOS. Two new platforms, TI Keystone and Rockchips RK3xxx are added in this branch, both containing almost no platform specific code at all, since they are using generic subsystem interfaces for clocks, pinctrl, interrupts etc. The device drivers are getting merged through the respective subsystem maintainer trees. One more SoC (u300) is now multiplatform capable and several others (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving towards that goal with this series but need more work. Also noteworthy is the work on PCI here, which is traditionally part of the SoC specific code. With the changes done by Thomas Petazzoni, we can now more easily have PCI host controller drivers as loadable modules and keep them separate from the platform code in drivers/pci/host. This has already led to the discovery that three platforms (exynos, spear and imx) are actually using an identical PCIe host controller and will be able to share a driver once support for spear and imx is added." * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits) ARM: integrator: let pciv3 use mem/premem from device tree ARM: integrator: set local side PCI addresses right ARM: dts: Add pcie controller node for exynos5440-ssdk5440 ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC ARM: EXYNOS: Enable PCIe support for Exynos5440 pci: Add PCIe driver for Samsung Exynos ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data ARM: keystone: Move CPU bringup code to dedicated asm file ARM: multiplatform: always pick one CPU type ARM: imx: select syscon for IMX6SL ARM: keystone: select ARM_ERRATA_798181 only for SMP ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1 ARM: OMAP2+: AM43x: resolve SMP related build error dmaengine: edma: enable build for AM33XX ARM: edma: Add EDMA crossbar event mux support ARM: edma: Add DT and runtime PM support to the private EDMA API dmaengine: edma: Add TI EDMA device tree binding arm: add basic support for Rockchip RK3066a boards arm: add debug uarts for rockchip rk29xx and rk3xxx series arm: Add basic clocks for Rockchip rk3066a SoCs ...
2013-07-02Merge tag 'cleanup-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "This contains cleanups as preparation for other branches adding new features, we pulled 16 branches for 9 platforms into this one. Most notable here is the removal of support for ATAGS based OMAP4 systems. Since all OMAP4 machines are fully functional with DT based booting in 3.10, we can remove a lot of code here. Also noteworthy is Maxime Ripard's cleanup of the machine descriptors, which means we need no machine descriptors in a lot more cases and can boot additional machines by just having the respective device drivers enabled." * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits) ARM: picoxcell: remove .nr_irqs reference ARM: s5p64x0: avoid build warning for uncompress.h ARM: SAMSUNG: Remove unused plat/regs-watchdog.h header ARM: SAMSUNG: Remove legacy watchdog reset code ARM: SAMSUNG: Let platforms use the new watchdog reset driver ARM: SAMSUNG: Add watchdog reset driver ARM: SAMSUNG: Use local definitions of watchdog registers watchdog: s3c2410_wdt: Use local register definitions ARM: S5P64X0: Use common uncompress.h part for plat-samsung ARM: SAMSUNG: Consolidate uncompress subroutine ARM: at91: drop rm9200dk board support ARM: dts: msm: Fix merge resolution ARM: OMAP1: Remove dma.h ARM: OMAP1: Remove legacy irda.h and irda setup from board files ARM: OMAP1: Remove duplicated DMA channel definitions ARM: OMAP1: Remove McBSP DMA channel definitions ARM: OMAP2+: Remove dma.h ARM: OMAP2+: hwmod: Remove remaining DMA channel definitions ARM: OMAP2+: Remove duplicated DMA channel definitions ARM: OMAP2+: Remove AES crypto device DMA channel definitions ...
2013-07-02Merge tag 'fixes-non-critical-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC non-cricitical bug fixes from Arnd Bergmann: "These are various bug fixes that were not considered important enough for merging into 3.10. The majority of the ARM fixes are for the OMAP and at91 platforms, and there is another set of bug fixes for device drivers that resolve 'randconfig' build errors and that the subsystem maintainers either did not pick up or preferred to get merged through the arm-soc tree." * tag 'fixes-non-critical-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits) ARM: at91/PMC: use at91_usb_rate() for UTMI PLL ARM: at91/PMC: fix at91sam9n12 USB FS init ARM: at91/PMC: at91sam9n12 family has a PLLB ARM: at91/PMC: sama5d3 family doesn't have a PLLB ARM: tegra: fix section mismatch in tegra_pmc_parse_dt ARM: mxs: don't select HAVE_PWM ARM: mxs: stub out mxs_pm_init for !CONFIG_PM cpuidle: calxeda: select ARM_CPU_SUSPEND ARM: mvebu: fix length of ethernet registers in mv78260 dtsi ARM: at91: cpuidle: Fix target_residency ARM: at91: fix at91_extern_irq usage for non-dt boards ARM: sirf: use CONFIG_SIRF rather than CONFIG_PRIMA2 where necessary clocksource: kona: adapt to CLOCKSOURCE_OF_DECLARE change X.509: do not emit any informational output mtd: omap2: allow bulding as a module [SCSI] nsp32: use mdelay instead of large udelay constants hwrng: bcm2835: fix MODULE_LICENSE tag ARM: at91: Change the internal SRAM memory type MT_MEMORY_NONCACHED ARM: at91: Fix link breakage when !CONFIG_PHYLIB MAINTAINERS: Add exynos filename match to ARM/S5P EXYNOS ARM ARCHITECTURES ...
2013-06-30Gpio/trivial: replace numeric with standard PM state macrosYijing Wang
Use standard PM state macros PCI_Dx instead of numeric 0/1/2.. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Michael Buesch <m@bues.ch> Cc: Grant Likely <grant.likely@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Jiri Kosina <trivial@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-25gpio/omap: don't use linear domain mapping for OMAP1Javier Martinez Canillas
Commit ede4d7a5 ("gpio/omap: convert gpio irq domain to linear mapping") converted the OMAP GPIO driver to use a linear mapping for the GPIO IRQ domain instead of using a legacy mapping. Not using a legacy mapping has a number of benefits but it requires the platform to support SPARSE_IRQ which currently is not supported on OMAP1. So this change caused a regression on OMAP1 platforms [1]. Since this issue is not present on all OMAP2+ platforms, there is no need to revert the driver to use legacy domain mapping for all the platforms. [1]: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg89005.html Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-06-25gpio: mvebu: Use irq_get_trigger_type() to get IRQ flagsJavier Martinez Canillas
Use irq_get_trigger_type() to get the IRQ trigger type flags instead calling irqd_get_trigger_type(irq_get_irq_data(irq)) Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@linux-mips.org Link: http://lkml.kernel.org/r/1371228049-27080-3-git-send-email-javier.martinez@collabora.co.uk Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-21Merge tag 'renesas-gpio-rcar2-for-v3.11' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers From Simon Horman: Second Round of Renesas ARM based SoC GPIO R-Car updates for v3.11 Documentation enhancement and code cleanup by Laurent Pinchart. * tag 'renesas-gpio-rcar2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections gpio-rcar: Reference core gpio documentation in the DT bindings Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-20Merge tag 'remove-nondt-exynos-3' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc From Kukjin Kim: cleanup and removing dead code for only support DT for exynos - remove board file for exynos - remove legacy files which are not used anymore - decouple ARCH_EXYNOS from PLAT_S5P * tag 'remove-nondt-exynos-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (35 commits) ARM: EXYNOS: Remove remaining dead code after non-DT support removal ARM: EXYNOS: Remove legacy L2X0 initialization ARM: EXYNOS: Use exynos_init_io() as map_io callback ARM: EXYNOS: Remove custom init_irq callbacks ARM: EXYNOS: Remove mach/regs-usb-phy.h header thermal: exynos: Support both EXYNOS4X12 SoCs ARM: EXYNOS: Remove unused base addresses from mach/map.h header ARM: EXYNOS: Remove mach/irqs.h header ARM: EXYNOS: Select SPARSE_IRQ for Exynos ARM: SAMSUNG: Make legacy MFC support code depend on SAMSUNG_ATAGS ARM: EXYNOS: Remove mach/regs-gpio.h header ARM: EXYNOS: Remove mach/gpio.h ARM: EXYNOS: Remove setup-i2c0.c ARM: EXYNOS: Do not select legacy Kconfig symbols any more ARM: SAMSUNG: Include most of mach/ headers conditionally ARM: EXYNOS: Decouple ARCH_EXYNOS from PLAT_S5P USB: Check for ARCH_EXYNOS separately platform: Check for ARCH_EXYNOS separately ARM: SAMSUNG: Compile legacy IRQ and GPIO PM code only with ATAGS support ARM: EXYNOS: Provide compatibility stubs for PM code in pm-core.h header ... Conflicts: arch/arm/mach-exynos/Kconfig Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-20gpiolib: remove warnning of allocations with IRQs disabledZhangfei Gao
Move of_gpiochip_add outof spin_lock, since kzalloc inside of_gpiochip_add -> of_gpiochip_add_pin_range -> gpiochip_add_pin_range -> kzalloc WARNING: at kernel/lockdep.c:2740 lockdep_trace_alloc+0xf8/0xfc() DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags)) Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-19gpio: grgpio: Staticize local symbolsSachin Kamat
Local symbols accessed only in this file are made static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-19gpio-langwell: remove Withney point supportAndy Shevchenko
It seems there is no user of the wp_gpio driver in the kernel. Let's remove it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-19gpio: ich: add GPO_BLINK supportVincent Donnefort
This patch makes sure blink hardware is disabled for selected GPIO. Blink hardware is controled by GPO_BLINK register and is available for GPIOs from 0 to 31. Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-19gpio: rcar: fix gpio_rcar_of_tableArnd Bergmann
The device table needs to be terminated with an empty element. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Simon Horman <horms+renesas@verge.net.au>
2013-06-19gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sectionsLaurent Pinchart
All functions and data types used by OF-specific code paths are declared in <linux/of.h> regardless of CONFIG_OF. Replace the #ifdef CONFIG_OF guard with a if(IS_ENABLED(CONFIG_OF)) and let the compiler optimize the unused code away. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-19ARM: SAMSUNG: Introduce GPIO_SAMSUNG Kconfig entryTomasz Figa
This patch adds Kconfig entry that selects whether legacy Samsung GPIO driver should be built or not. For platforms that support only DT based boot, the new pinctrl driver is used and so the old one is not needed. Cc: Grant Likely <grant.likely@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-06-17gpio-sta2x11: Convert to use devm_ioremap_resourceTushar Behera
Commit 75096579c3ac ("lib: devres: Introduce devm_ioremap_resource()") introduced devm_ioremap_resource() and deprecated the use of devm_request_and_ioremap(). Signed-off-by: Tushar Behera <tushar.behera@linaro.org> CC: linux-gpio@vger.kernel.org CC: Grant Likely <grant.likely@linaro.org> CC: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17gpio_msm: Convert to use devm_ioremap_resourceTushar Behera
Commit 75096579c3ac ("lib: devres: Introduce devm_ioremap_resource()") introduced devm_ioremap_resource() and deprecated the use of devm_request_and_ioremap(). Signed-off-by: Tushar Behera <tushar.behera@linaro.org> CC: linux-gpio@vger.kernel.org CC: Linus Walleij <linus.walleij@linaro.org> CC: Grant Likely <grant.likely@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17gpio-rcar: Use OUTDT when reading GPIOs configured as outputMagnus Damm
Testing on r8a7790 shows that INDT does not indicate the correct pin state when reading a GPIO configured as output, so update the gpio_rcar_get() function to handle this case. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17gpio-sta2x11: Fix potential NULL pointer dereferenceSachin Kamat
devm_kzalloc can return NULL. Check for it before dereferencing. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17gpio/omap: omap_gpio_init_context stub must be inlineArnd Bergmann
The bug fix 352a2d5bf "gpio/omap: ensure gpio context is initialised" has caused a new warning for omap1_defconfig: drivers/gpio/gpio-omap.c:1465:13: warning: 'omap_gpio_init_context' defined but not used [-Wunused-function] static void omap_gpio_init_context(struct gpio_bank *p) {} ^ The solution is to mark the stub function as 'static inline' so it gets left out of the build when unused. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17gpio: msm-v1: Remove errant __devinit to fix compileStephen Boyd
Commit 7bce696 (gpio: Make gpio-msm-v1 into a platform driver, 2013-03-04) was based on an older kernel where __devinit still existed. Remove the erroneous __devinit marking. Cc: David Brown <davidb@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17gpio: devres: make comments properWolfram Sang
The free-function mentioned "interrupt" instead of "GPIO". While we are here, use "GPIO" (capital letters) consistently. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17GPIO: xilinx: Enable driver for Xilinx zynqMichal Simek
Enable gpio driver for usage on Xilinx ARM zynq platform. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17GPIO: xilinx: Use BIT macroMichal Simek
Use BIT macro from linux/bitops.h. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17GPIO: xilinx: Use __raw_readl/__raw_writel IO functionsMichal Simek
This driver can be used on Xilinx ARM Zynq platform where in_be32/out_be32 functions are not implemented. Use __raw_readl/__raw_writel functions which are implemented on Microblaze and PowerPC. For ARM readl/writel functions are used instead. The correct way how to implement this is to detect endians directly on IP. But for the gpio case without interrupt connected(it means without interrupt logic) there are just 2 registers data and tristate where auto detection can't be done. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17GPIO: xilinx: Add support for dual channelMichal Simek
Supporting the second channel in the driver. Offset is 0x8 and both channnels share the same IRQ. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17GPIO: xilinx: Simplify driver probe functionMichal Simek
Simplification is done by using OF helper function which increase readability of code and remove (if (var) var = be32_to_cpup;) assignment. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-14Merge tag 'msm-cleanup-for-3.11' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm into next/cleanup From David Brown: Cleanups for MSM for 3.11 These are a handful of cleanups to the MSM tree. The gpio cleanups get us closer to having proper pinmux and gpio support. * tag 'msm-cleanup-for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm: mfd: ssbi: Use devm_* and simplify code gpio: msm: Add device tree and irqdomain support for gpio-msm-v2 ARM: msm: Remove gpiomux-v2 and re-organize MSM_GPIOMUX configs msm: iomap: Remove unused bases and mappings msm: Remove unused file core.h ARM: msm: Remove init_irq declaration in machine description Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/boot/dts/msm8660-surf.dts arch/arm/boot/dts/msm8960-cdp.dts
2013-06-14Merge tag 'msm-fix-for-3.11' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm into next/cleanup From David Brown: Some minor fixes for MSM for 3.11 I don't expect these to be necessary for stable, since the fixes are to recently added code. The strncpy fix is only in debug code that isn't normally compiled or used (and is being removed in upcoming patches). * tag 'msm-fix-for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm: gpio: msm-v1: Remove errant __devinit to fix compile mfd: ssbi: Add MODULE_DEVICE_TABLE ARM: dts: msm: Fix bad register addresses arch: arm: mach-msm: using strlcpy instead of strncpy Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-14Merge tag 'msm-fix-for-3.11' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm into next/fixes-non-critical From David Brown: Some minor fixes for MSM for 3.11 I don't expect these to be necessary for stable, since the fixes are to recently added code. The strncpy fix is only in debug code that isn't normally compiled or used (and is being removed in upcoming patches). * tag 'msm-fix-for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm: gpio: msm-v1: Remove errant __devinit to fix compile mfd: ssbi: Add MODULE_DEVICE_TABLE ARM: dts: msm: Fix bad register addresses arch: arm: mach-msm: using strlcpy instead of strncpy Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-14Merge tag 'renesas-gpio-rcar-for-v3.11' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers From Simon Horman: Renesas ARM based SoC GPIO R-Car updates for v3.11 DT support to GPIO R-Car driver by Laurent Pinchart. * tag 'renesas-gpio-rcar-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (131 commits) gpio-rcar: Add DT support
2013-06-12gpio: msm: Add device tree and irqdomain support for gpio-msm-v2Rohit Vaswani
This cleans up the gpio-msm-v2 driver of all the global define usage. The number of gpios are now defined in the device tree. This enables adding irqdomain support as well. Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2013-06-12gpio: msm-v1: Remove errant __devinit to fix compileStephen Boyd
Commit 7bce696 (gpio: Make gpio-msm-v1 into a platform driver, 2013-03-04) was based on an older kernel where __devinit still existed. Remove the erroneous __devinit marking. Cc: David Brown <davidb@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2013-06-12ARM: msm: Remove gpiomux-v2 and re-organize MSM_GPIOMUX configsRohit Vaswani
Remove gpiomux-v2 as it's not being used and make way for future improvements. Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2013-06-12gpio-rcar: Add DT supportLaurent Pinchart
Add DT bindings for the gpio-rcar driver and read the device configuration from the DT node at probe time if available. Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-11Merge branch 'clps711x/soc' into next/socOlof Johansson
From Alexander Shiyan, this is a series of cleanups of clps711x, movig it closer to multiplatform and cleans up a bunch of old code. * clps711x/soc: ARM: clps711x: Update defconfig ARM: clps711x: Add support for SYSCON driver ARM: clps711x: edb7211: Control LCD backlight via PWM ARM: clps711x: edb7211: Add support for I2C ARM: clps711x: Optimize interrupt handling ARM: clps711x: Add clocksource framework ARM: clps711x: Replace "arch_initcall" in common code with ".init_early" ARM: clps711x: Move specific definitions from hardware.h to boards files ARM: clps711x: p720t: Define PLD registers as GPIOs ARM: clps711x: autcpu12: Move remaining specific definitions to board file ARM: clps711x: autcpu12: Special driver for handling memory is removed ARM: clps711x: autcpu12: Add support for NOR flash ARM: clps711x: autcpu12: Move LCD DPOT definitions to board file ARM: clps711x: Set PLL clock to zero if we work from 13 mHz source ARM: clps711x: Remove NEED_MACH_MEMORY_H dependency ARM: clps711x: Re-add GPIO support GPIO: clps711x: Add DT support GPIO: clps711x: Rewrite driver for using generic GPIO code + Linux 3.10-rc4 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-11GPIO: clps711x: Add DT supportAlexander Shiyan
Add DT support to the CLPS711X GPIO driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-11GPIO: clps711x: Rewrite driver for using generic GPIO codeAlexander Shiyan
This patch provides rewritten driver for CLPS711X GPIO which uses generic GPIO code. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>