| Age | Commit message (Collapse) | Author |
|---|
|
This is required to get fbcon probing to work on new connectors,
callers should acquire the mode config lock before calling these.
Reviewed-by: Todd Previte <tprevite@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
To implement hotplug detection in a race-free manner, drivers must call
drm_kms_helper_poll_init() before hotplug events can be triggered. Such
events can be triggered right after any of the encoders or connectors
are initialized. At the same time, if the drm_fb_helper_hotplug_event()
helper is used by a driver, then the poll helper requires some parts of
the FB helper to be initialized to prevent a crash.
At the same time, drm_fb_helper_init() requires information that is not
necessarily available at such an early stage (number of CRTCs and
connectors), so it cannot be used yet.
Add a new helper, drm_fb_helper_prepare(), that initializes the bare
minimum needed to allow drm_kms_helper_poll_init() to execute and any
subsequent hotplug events to be processed properly.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Some drivers need to be able to have a perfect race-free fbcon setup.
Current drivers only enable hotplug processing after the call to
drm_fb_helper_initial_config which leaves a tiny but important race.
This race is especially noticable on embedded platforms where the
driver itself enables the voltage for the hdmi output, since only then
will monitors (after a bit of delay, as usual) respond by asserting
the hpd pin.
Most of the infrastructure is already there with the split-out
drm_fb_helper_init. And drm_fb_helper_initial_config already has all
the required locking to handle concurrent hpd events since
commit 53f1904bced78d7c00f5d874c662ec3ac85d0f9f
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Mar 20 14:26:35 2014 +0100
drm/fb-helper: improve drm_fb_helper_initial_config locking
The only missing bit is making drm_fb_helper_hotplug_event save
against concurrent calls of drm_fb_helper_initial_config. The only
unprotected bit is the check for fb_helper->fb.
With that drivers can first initialize the fb helper, then enabel
hotplug processing and then set up the initial config all in a
completely race-free manner. Update kerneldoc and convert i915 as a
proof of concept.
Feature requested by Thierry since his tegra driver atm reliably boots
slowly enough to misses the hotplug event for an external hdmi screen,
but also reliably boots to quickly for the hpd pin to be asserted when
the fb helper calls into the hdmi ->detect function.
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
drm_fb_helper_debug_enter()
The following list empty check is unnecessary because we would still do nothing
real and return 'val' if my_list is empty.
if (list_empty(&my_list))
return val;
list_for_each_entry(pos, &my_list, member) {
...
}
return val;
This patch removes the unnecessary check in drm_fb_helper_debug_enter().
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The variable info->fix.type_aux is set to zero twice in the function
drm_fb_helper_fill_fix(). This patch removes one redundant.
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
All drm_fb_helper_restore_fbdev_mode() call sites, save one, do the same
locking. Simplify this into drm_fb_helper_restore_fbdev_mode_unlocked().
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
For atomic, it will be quite necessary to not need to care so much
about locking order. And 'state' gives us a convenient place to stash a
ww_ctx for any sort of update that needs to grab multiple crtc locks.
Because we will want to eventually make locking even more fine grained
(giving locks to planes, connectors, etc), split out drm_modeset_lock
and drm_modeset_acquire_ctx to track acquired locks.
Atomic will use this to keep track of which locks have been acquired
in a transaction.
v1: original
v2: remove a few things not needed until atomic, for now
v3: update for v3 of connection_mutex patch..
v4: squash in docbook
v5: doc tweaks/fixes
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Generated using semantic patch:
@@
expression E;
@@
- drm_get_connector_name(E)
+ E->name
[airlied: regenerated]
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Fix a few trivial typos in the framebuffer helper documentation.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Commit 62ff94a54921 "drm/crtc-helper: remove LOCKING from kerneldoc"
causes drm_helper_crtc_in_use() and drm_helper_encoder_in_use() to
complain loudly during a kernel panic or sysrq processing. This is
caused by nobody acquiring the modeset lock in these code paths.
This patch fixes this by trying to acquire the modeset lock for each
FB helper that's forced to kernel mode. If the lock can't be acquired,
it's likely that somebody else is performing a modeset. However, doing
another modeset concurrently might make things even worse, so the safe
option is to simply bail out in that case.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Currently drm_pick_cmdline_mode() doesn't care about the interlace
when the given mode line has no "i" suffix. That is, when there are
multiple entries for the same resolution, an interlace mode might be
picked up just depending on the assigned order, and there is no way to
exclude it.
This patch changes the logic for the mode selection, to prefer the
noninterlace mode unless the interlace mode is explicitly given.
When no matching mode is found, it still tries the interlace mode as
fallback.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Now that CRTC's have a primary plane, there's no need to track the
framebuffer in the CRTC. Replace all references to the CRTC fb with the
primary plane's fb.
This patch was generated by the Coccinelle semantic patching tool using
the following rules:
@@ struct drm_crtc C; @@
- (C).fb
+ C.primary->fb
@@ struct drm_crtc *C; @@
- (C)->fb
+ C->primary->fb
v3: Generate patch via coccinelle. Actual removal of crtc->fb has been
moved to a subsequent patch.
v2: Fixup several lingering crtc->fb instances that were missed in the
first patch iteration. [Rob Clark]
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
|
|
The DRM core currently only tracks "overlay"-style planes. Start
refactoring the plane handling to allow other plane types (primary and
cursor) to also be placed on the DRM plane list.
v2: Add drm_for_each_legacy_plane() iterator to smooth transition
of drivers with plane loops.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
|
|
The locking in drm_fb_helper_initial_config is a bit troublesome for a
few reasons:
- We can't just wrap the entire function up into modeset locks since
the fbdev registration might call down into fbcon code, which then
through our ->set_par implementation needs to be able to grab all
modeset locks. So we'd have a neat deadlock.
- This implies though that all current callers don't hold any modeset
locks by necessity, so we have free reign to grab any modeset locks
we need to grab.
- The private state of the fbdev helper doesn't need any protection
through locks, since once we have the fbdev registered it is mostly
invariant or protected through the modeset locking in ->set_par and
other callbacks. We can fully rely on driver having non-racy setup
sequences here. For the initial config computation we actually may
not grab locks since drivers which provide their own magic sauce
(like i915) might need to grab locks themselves.
- We should grab locks though when we probe outputs. Currently there's
not much risk, but already now userspace could start poking at sysfs
files and so probe concurrently. I expect that in the future driver
init will be much more async, and since probing is really
time-consuming this is a prime candidate.
- We must not hold any crtc->mutex locks while calling probe functions
since those might need to lock a crtc for e.g. load detection. i915
is such a driver.
Also it's the probing calls which hit upon piles of new locking
asserts I've recently added in
commit 62ff94a5492175759546f8bc61383189d6b49122
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Jan 23 22:18:47 2014 +0100
drm/crtc-helper: remove LOCKING from kerneldoc
and
commit 63951385052f7974155fa38f962f0f4e9847f90a
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Jan 23 15:14:15 2014 +0100
drm/doc: Repleace LOCKING kerneldoc sections in drm_modes.c
Hence the right fix is to grab the mode_config mutex, but only that
and only right around the probe calls.
It seems to be sufficient to shut up all the locking WARNINGs I see on
i915 and nouveau in drm_fb_helper_initial_config.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
into drm-next
Merge straggling core drm patches.
* 'topic/core-stuff' of git://git.freedesktop.org/git/drm-intel:
drm: Fix use-after-free in the shadow-attache exit code
drm/fb-helper: Do the 'max_conn_count' zero check
drm: Check if the allocation has succeeded before dereferencing newmode
drm/fb-helper: Use drm_fb_helper_restore_fbdev_mode() in drm_fb_helper_set_par()
drm/edid: request HDMI underscan by default
|
|
Since we cannot make sure the 'max_conn_count' will always be none
zero from the users, and then if max_conn_count equals to zero, the
kcalloc() will return ZERO_SIZE_PTR, which equals to ((void *)16).
So this patch fix this with just doing the 'max_conn_count' zero check
in the front of drm_fb_helper_init().
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
CC: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Use drm_fb_helper_restore_fbdev_mode() in drm_fb_helper_set_par() to
make sure extra planes get disabled whenever fbcon takes over.
Otherwise the code in drm_fb_helper_set_par() was already doing the
exact same thing as drm_fb_helper_restore_fbdev_mode(), so this doesn't
change the behaviour in any other way.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
There's a neat FIXME asking whether this is really need. I'd
say really no.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This allows drivers to use them in custom initial_config functions.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Sometimes we want to disable all the screens on a system, because that
will allow the graphics card to be put into low-power states. The
problem is that, for example, while all screens are disabled, if we
get a hotplug interrupt, fbcon will decide to set a mode instead of
keeping everything disabled, which will remove us from our low power
states.
Let's assume that if there's a DRM master, it will be able to do
whatever is appropriate when we get the hotplug.
This problem can be reproduced by the runtime PM test program from
intel-gpu-tools: we disable all the screens so the graphics device can
be put into D3, then something triggers a hotplug interrupt, fbcon
sets a mode and breaks our test suite. The problem can be reproduced
more easily by the "i2c" subtest.
Other approaches considered for the problem:
- Return "false" if "bound == 0" and the caller of
drm_fb_helper_is_bound is a hotplug handler. This would break
the case where the machine boots with no outputs connected, then
the user plugs a monitor.
- Add a new IOCTL to force fbcon to not set modes. This would keep
all the current applications behaving the same, but adding a new
IOCTL is not always the greatest idea.
- Return false only if "dev->primary->master && bound == 0". This
was my first implementation, but Chris suggested we should do
the check irrespective of the "bound" variable.
Thanks to Daniel Vetter for the investigation, ideas and the
implementation of the hotplug alternative.
v2: - Do the check first, irrespective of "bound".
- Cc dri-devel
Cc: dri-devel@lists.freedesktop.org
Credits-to: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
I want to merge in the new Broadwell support as a late hw enabling
pull request. But since the internal branch was based upon our
drm-intel-nightly integration branch I need to resolve all the
oustanding conflicts in drm/i915 with a backmerge to make the 60+
patches apply properly.
We'll propably have some fun because Linus will come up with a
slightly different merge solution.
Conflicts:
drivers/gpu/drm/i915/i915_dma.c
drivers/gpu/drm/i915/i915_drv.c
drivers/gpu/drm/i915/intel_crt.c
drivers/gpu/drm/i915/intel_ddi.c
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_dp.c
drivers/gpu/drm/i915/intel_drv.h
All rather simple adjacent lines changed or partial backports from
-next to -fixes, with the exception of the thaw code in i915_dma.c.
That one needed a bit of shuffling to restore the intent.
Oh and the massive header file reordering in intel_drv.h is a bit
trouble. But not much.
v2: Also don't forget the fixup for the silent conflict that results
in compile fail ...
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
For drivers which might want to disable fbdev legacy support.
Select the new option in all drivers for now, so this shouldn't result
in any change. Drivers need some work anyway to make fbdev support
optional (if they have it implemented, that is), so the recommended
way to expose this is by adding per-driver options. At least as long
as most drivers don't support disabling the fbdev support.
v2: Update for new drm drivers msm and rcar-du. Note that Rob's msm
driver can already take advantage of this, which allows us to build
msm without any fbdev depencies in the kernel!
v3: Move the MODULE_* stuff from the fbdev helper file to
drm_crtc_helper.c.
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Reviewed-by: Chon Ming Lee <chon.ming.lee@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
progress"
This reverts commit 928c2f0c006bf7f381f58af2b2786d2a858ae311.
This patch double applied, two checks for the price of one.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Otherwise the system will burn even brighter and worse, leave the user
wondering what's going on exactly.
Since we already have a panic handler which will (try) to restore the
entire fbdev console mode, we can just bail out. Inspired by a patch from
Konstantin Khlebnikov. The callchain leading to this, cut&pasted from
Konstantin's original patch:
callstack:
panic()
bust_spinlocks(1)
unblank_screen()
vc->vc_sw->con_blank()
fbcon_blank()
fb_blank()
info->fbops->fb_blank()
drm_fb_helper_blank()
drm_fb_helper_dpms()
drm_modeset_lock_all()
mutex_lock(&dev->mode_config.mutex)
Note that the entire locking in the fb helper around panic/sysrq and kdbg
is ... non-existant. So we have a decent change of blowing up
everything. But since reworking this ties in with funny concepts like the
fbdev notifier chain or the impressive things which happen around
console_lock while oopsing, I'll leave that as an exercise for braver
souls than me.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Dave Airlie <airlied@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Check whether the crtc provides the load_lut callback before calling it.
This allows the driver to provide the hook only for those CRTCs that
actually have the hardware support for it.
Also check whether the driver provided the fb_helper gamma_set/gamma_get
hooks. It's a driver bug if it allows non-truecolor fbdev visuals w/o
these hooks, but auditing all the drivers is too tedious. So just slap
a big WARN_ON() there and bail out before things start to explode.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@gmail.com>
|
|
Perform the drm_fb_helper_is_bound() check to avoid clobbering the
display palette of some other KMS client.
While at it, fix up the locking by grabbing all modeset locks for the
duration of the fb_setcmap operation.
v2: Make a note of the locking changes in the commit message
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
|
|
Cursors and plane can obscure whatever fbdev wants to show the user.
Disable them all in drm_fb_helper_restore_fbdev_mode.
After the cursors and planes have been disabled, user space needs to
explicitly re-enable them to make them visible again.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@gmail.com>
|
|
Pull drm updates from Dave Airlie:
"This is the main drm pull request for 3.10.
Wierd bits:
- OMAP drm changes required OMAP dss changes, in drivers/video, so I
took them in here.
- one more fbcon fix for font handover
- VT switch avoidance in pm code
- scatterlist helpers for gpu drivers - have acks from akpm
Highlights:
- qxl kms driver - driver for the spice qxl virtual GPU
Nouveau:
- fermi/kepler VRAM compression
- GK110/nvf0 modesetting support.
Tegra:
- host1x core merged with 2D engine support
i915:
- vt switchless resume
- more valleyview support
- vblank fixes
- modesetting pipe config rework
radeon:
- UVD engine support
- SI chip tiling support
- GPU registers initialisation from golden values.
exynos:
- device tree changes
- fimc block support
Otherwise:
- bunches of fixes all over the place."
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (513 commits)
qxl: update to new idr interfaces.
drm/nouveau: fix build with nv50->nvc0
drm/radeon: fix handling of v6 power tables
drm/radeon: clarify family checks in pm table parsing
drm/radeon: consolidate UVD clock programming
drm/radeon: fix UPLL_REF_DIV_MASK definition
radeon: add bo tracking debugfs
drm/radeon: add new richland pci ids
drm/radeon: add some new SI PCI ids
drm/radeon: fix scratch reg handling for UVD fence
drm/radeon: allocate SA bo in the requested domain
drm/radeon: fix possible segfault when parsing pm tables
drm/radeon: fix endian bugs in atom_allocate_fb_scratch()
OMAPDSS: TFP410: return EPROBE_DEFER if the i2c adapter not found
OMAPDSS: VENC: Add error handling for venc_probe_pdata
OMAPDSS: HDMI: Add error handling for hdmi_probe_pdata
OMAPDSS: RFBI: Add error handling for rfbi_probe_pdata
OMAPDSS: DSI: Add error handling for dsi_probe_pdata
OMAPDSS: SDI: Add error handling for sdi_probe_pdata
OMAPDSS: DPI: Add error handling for dpi_probe_pdata
...
|
|
Driver's and ->fill_modes functions are allowed to grab crtc mutexes
(for e.g. load detect). Hence we need to first only grab the general
kms mutex, and only in a second step grab all locks to do the
modesets.
This prevents a deadlock on my gm45 in the tv load detect code called
by drm_helper_probe_single_connector_modes.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Rather than building a config which may or may not work, let the driver
build an initial fb config. This allows the driver to use the BIOS boot
configuration for example, displaying kernel messages and the initial fb
console on the same outputs the BIOS lit up at boot time. If that
fails, the driver can still fall back the same way as the core.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Dave Airlie <airlied@gmail.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Otherwise the system will burn even brighter and worse, leave the user
wondering what's going on exactly.
Since we already have a panic handler which will (try) to restore the
entire fbdev console mode, we can just bail out. Inspired by a patch
from Konstantin Khlebnikov. The callchain leading to this, cut&pasted
from Konstantin's original patch:
callstack:
panic()
bust_spinlocks(1)
unblank_screen()
vc->vc_sw->con_blank()
fbcon_blank()
fb_blank()
info->fbops->fb_blank()
drm_fb_helper_blank()
drm_fb_helper_dpms()
drm_modeset_lock_all()
mutex_lock(&dev->mode_config.mutex)
Note that the entire locking in the fb helper around panic/sysrq and
kdbg is ... non-existant. So we have a decent change of blowing up
everything. But since reworking this ties in with funny concepts like
the fbdev notifier chain or the impressive things which happen around
console_lock while oopsing, I'll leave that as an exercise for braver
souls than me.
v2: Drop the -EBUSY return value I've copied, we don't need it since
the we'll take care of things ourselves anyway.
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
References: https://patchwork.kernel.org/patch/1878181/
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Now that the fbdev helper interface for drivers is trimmed down,
update the kerneldoc for all the remaining exported functions.
I've tried to beat the DocBook a bit by reordering the function
references a bit into a more sensible ordering. But that didn't work
out at all. Hence just extend the in-code DOC: section a bit.
Also remove the LOCKING: sections - especially for the setup functions
they're totally bogus. But that's not a documentation problem, but
simply an artifact of the current rather hazardous locking around drm
init and even more so around fbdev setup ...
v2: Some further improvements:
- Also add documentation for drm_fb_helper_single_add_all_connectors,
Dave Airlie didn't want me to kill this one from the fb helper
interface.
- Update docs for drm_fb_helper_fill_var/fix - they should be used
from the driver's ->fb_probe callback to setup the fbdev info
structure.
- Clarify what the ->fb_probe callback should all do - it needs to
setup both the fbdev info and allocate the drm framebuffer used as
backing storage.
- Add basic documentaation for the drm_fb_helper_funcs driver callback
vfunc.
v3: Implement clarifications Laurent Pinchart suggested in his review.
v4: Fix another mispelling Laurent spotted.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
No need to check whether we've allocated a new fb since we're not
always doing that. Also, we always need to register the fbdev and add
it to the panic notifier.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The idea behind calling down into the driver's ->fb_probe function on each
hotplug seems to be able to reallocate the backing storage (if e.g. a screen
with higher resolution gets added). But that requires quite a bit of work in the
fb helper itself, since currently we limit new screens to the currently
allocated fb. An no kms driver supports fbdev fb resizing.
So don't bother and start to simplify the code by calling drm_fb_helper_set_par
directly from the fbdev hotplug function, since that's the only thing left in
drm_fb_helper_single_fb_probe which does not concern itself with fb allocation
and initial setup. Follow-on patches will streamline the initial setup
code.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
While doing the modeset rework for drm/i915 I've noticed that the fb
helper is very liberal with the semantics of the ->set_config
interface:
- It doesn't bother clearing stale modes (e.g. when unplugging a
screen).
- It unconditionally sets the fb, even if no mode will be set on a
given crtc.
- The initial setup is a bit fun since we need to pick crtcs to decide
the desired fb size, but also should set the modeset->fb pointer.
Explain what's going on in the fixup code after the fb is allocated.
The crtc helper didn't really care, but the new i915 modeset
infrastructure did, so I've had to add a bunch of special-cases to
catch this.
Fix this all up and enforce the interface by converting the checks in
drm/i915/intel_display.c to BUG_ONs.
v2: Fix commit message spell fail spotted by Rob Clark.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This should be done in the drivers for two reasons:
- it gets in the way of fastboot efforts
- it links the fb helpers with the crtc helpers instead of going
through the real interface vfuncs, forcing i915 to fake all the
->disable callbacks used by the crtc helper to avoid ugly Oopsen
v2: Resolve conflicts since drivers still call
drm_fb_helper_single_add_all_connectors.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Not called by anyone, and really, shouldn't be. Drivers are supposed
either drm_fb_helper_initial_config or drm_fb_helper_hotplug_event.
Originally this was done differently, but is now consolidated in the
helper functions and no longer done by drivers directly.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
It doesn't even show up in any header files and only used iternally.
Originally it was (ab)used to restore the fbcon on lastclose, but that
died with
commit e8e7a2b8ccfdae0d4cb6bd25824bbedcd42da316
Author: Dave Airlie <airlied@redhat.com>
Date: Thu Apr 21 22:18:32 2011 +0100
drm/i915: restore only the mode of this driver on lastclose (v2)
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
It's only used internally for the sysrq and panic handlers provided by
the drm fb helper implementation. Hence just inline it, kill the
export and remove the confusing kerneldoc. Driver's are supposed to
call drm_fb_helper_restore_fbdev_mode on lastclose.
Note that locking is totally fubar - the sysrq case doesn't take any
locks at all. The panic handler probably shouldn't take any locks
since it'll only make things worse. Otoh it's probably better to
switch things over to the atomic modeset callbacks (and disable the
panic handler for those drivers which don't implement it).
But that's both better done in separate patches.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
... it's required. Fix up exynos and the cma helper, and add a
corresponding WARN_ON to drm_fb_helper_restore_fbdev_mode.
Note that tegra calls the fbdev cma helper restore function also from
it's driver-load callback. Which is a bit against current practice,
since usually the call is only from ->lastclose, and initial setup is
done by drm_fb_helper_initial_config.
Also add the relevant drm DocBook entry.
v2: Add promised WARN to restore_fbdev_mode.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
We need to make sure that the fbcon is still bound when touching the
hw, since otherwise we might corrupt the modeset state of kms clients.
X mostly works around that with VT switching and setting the VT into
raw mode, which disables most fbcon events.
Raw kms test programs though don't do that dance, and in the future
we might want to aim to abolish CONFIG_VT anyway. So improve preventive
measures a bit. To do so, extract the existing logic for handling hotplug
events (which X can't block with the current set of tricks) and reuse
it for the fbdev blanking helper.
Long-term we really need to either scrap this all and only have a OOPS
console, or come up with a saner model for device ownership sharing
between fbdev/fbcon and kms userspace.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This is the first step towards introducing the new modeset locking
scheme. The plan is to put helper functions into place at all the
right places step-by-step, so that the final patch to switch on the
new locking scheme doesn't need to touch every single driver.
This helper here will serve as the shotgun solutions for all places
where a more fine-grained locking isn't (yet) implemented.
v2: Fixup kerneldoc for unlock_all.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
With refcounting we need to adjust framebuffer refcounts at each
callsite - much easier to do if they all call the same little helper
function.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Replace references to and remove the connector property fxns, which
have been superseded with the more general object property fxns:
+ drm_connector_attach_property -> drm_object_attach_property
+ drm_connector_property_set_value -> drm_object_property_set_value
+ drm_connector_property_get_value -> drm_object_property_get_value
Signed-off-by: Rob Clark <rob@ti.com>
|
|
Again only minimal changes to make kerneldoc no longer shout. Plus a
little introduction in the form of a inline DOC: section to quickly
explain what this is all about.
v2: Fixup spelling fail.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
kcalloc returns NULL on failure. Hence check for the return value
and exit on error to avoid NULL pointer dereference.
Fixes the following smatch errors:
drivers/gpu/drm/drm_fb_helper.c:1271 drm_setup_crtcs() error:
potential null dereference 'modes'. (kcalloc returns null)
drivers/gpu/drm/drm_fb_helper.c:1272 drm_setup_crtcs() error:
potential null dereference 'crtcs'. (kcalloc returns null)
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Remove unnecessary braces to silence the following type of
checkpatch warnings:
WARNING: braces {} are not necessary for single statement blocks
WARNING: braces {} are not necessary for any arm of this statement
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
