summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/i915
AgeCommit message (Collapse)Author
2012-12-16Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-next Daniel writes: A few leftover fixes for 3.8: - VIC support for hdmi infoframes with the associated drm helper, fixes some black TVs (Paulo Zanoni) - Modeset state check (and fixup if the BIOS messed with the hw) for lid-open. modeset-rework fallout. Somehow the original reporter went awol, so this stalled for way too long until we've found a new victim^Wreporter with broken BIOS. - seqno wrap fixes from Mika and Chris. - Some minor fixes all over from various people. - Another race fix in the pageflip vs. unpin code from Chris. - hsw vga resume support and a few more fdi link fixes (only used for vga on hsw) from Paulo. - Regression fix for DMAR from Zhenyu Wang - I've scavenged memory from my DMAR for a while and it broke right away :( - Regression fix from Takashi Iwai for ivb lvds - some w/a needs to be (partially) moved back into place. Note that these are regressions in -next. - One more fix for ivb 3 pipe support - it now actually seems to work. * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: (25 commits) drm/i915: Fix missed needs_dmar setting drm/i915: Fix shifted screen on top of LVDS on IVY laptop drm/i915: disable cpt phase pointer fdi rx workaround drm/i915: set the LPT FDI RX polarity reversal bit when needed drm/i915: add lpt_init_pch_refclk drm/i915: add support for mPHY destination on intel_sbi_{read, write} drm/i915: reject modes the LPT FDI receiver can't handle drm/i915: fix hsw_fdi_link_train "retry" code drm/i915: Close race between processing unpin task and queueing the flip drm/i915: fixup l3 parity sysfs access check drm/i915: Clear the existing watermarks for g4x when modifying the cursor sr drm/i915: do not access BLC_PWM_CTL2 on pre-gen4 hardware drm/i915: Don't allow ring tail to reach the same cacheline as head drm/i915: Decouple the object from the unbound list before freeing pages drm/i915: Set sync_seqno properly after seqno wrap drm/i915: Include the last semaphore sync point in the error-state drm/i915: Rearrange code to only have a single method for waiting upon the ring drm/i915: Simplify flushing activity on the ring drm/i915: Preallocate next seqno before touching the ring drm/i915: force restore on lid open ...
2012-12-13drm/i915: Fix missed needs_dmar settingZhenyu Wang
From Ben's AGP dependence removal change, "needs_dmar" flag has not been properly setup for new chips using new GTT init function. This one adds missed setting of that flag to make sure we do pci mappings with IOMMU enabled. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11drm/i915: Fix shifted screen on top of LVDS on IVY laptopTakashi Iwai
The commit [23670b322: drm/i915: CPT+ pch transcoder workaround] caused a regression on some HP laptops with IvyBridge. The whole laptop screen is shifted downward for a few pixels constantly. The problem appears only on LVDS while DP and VGA seem unaffected. Also, the problem disappears once when go and back from S3. (S4 resume still shows the same problem.) This patch revives the minimum part the commit above dropped. For fixing this regression, only the setup of CHICKEN2 bit in cpt_init_clock_gating() is needed. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-10drm/i915: disable cpt phase pointer fdi rx workaroundDaniel Vetter
We've originally added this in commit 291427f5fdadec6e4be2924172e83588880e1539 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Fri Jul 29 12:42:37 2011 -0700 drm/i915: apply phase pointer override on SNB+ too and then copy-pasted it over to ivb/ppt. The w/a was originally added for ilk/ibx in commit 5b2adf897146edeac6a1e438fb67b5a53dbbdf34 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Thu Oct 7 16:01:15 2010 -0700 drm/i915: add Ironlake clock gating workaround for FDI link training and fixed up a bit in commit 6f06ce184c765fd8d50669a8d12fdd566c920859 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Tue Jan 4 15:09:38 2011 -0800 drm/i915: set phase sync pointer override enable before setting phase sync pointer It turns out that this w/a isn't actually required on cpt/ppt and positively harmful on ivb/ppt when using fdi B/C links - it results in a black screen occasionally, with seemingfully everything working as it should. The only failure indication I've found in the hw is that eventually (but not right after the modeset completes) a pipe underrun is signalled. Big thanks to Arthur Runyan for all the ideas for registers to check and changes to test, otherwise I couldn't ever have tracked this down! Cc: "Runyan, Arthur J" <arthur.j.runyan@intel.com> Cc: stable@vger.kernel.org Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-10drm/i915: set the LPT FDI RX polarity reversal bit when neededPaulo Zanoni
If we fail to set the bit when needed we get some nice FDI link training failures (AKA "black screen on VGA output"). While we don't really know how to properly choose whether we need to set the bit or not (VBT?), just read the initial value set by the BIOS and store it for later usage. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-10drm/i915: add lpt_init_pch_refclkPaulo Zanoni
We need this code to init the PCH SSC refclk and the FDI registers. The BIOS does this too and that's why VGA worked before this patch, until you tried to suspend the machine... This patch implements the "Sequence to enable CLKOUT_DP for FDI usage and configure PCH FDI/IO" from our documentation. v2: - Squash Damien Lespiau's reset spelling fix on top. - Add a comment that we don't need to bother about the ULT special case Damien noticed, since ULT won't have VGA. - Add a comment to rip out the SDV codepaths once haswell ships for real. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> (v1) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-10Merge branch 'drm-next-3.8' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next Alex writes: Pretty minor -next pull request. We some additional new bits waiting internally for release. Hopefully Monday we can get at least some of them out. The others will probably take a few more weeks. Highlights of the current request: - ELD registers for passing audio information to the sound hardware - Handle GPUVM page faults more gracefully - Misc fixes Merge radeon test * 'drm-next-3.8' of git://people.freedesktop.org/~agd5f/linux: (483 commits) drm/radeon: bump driver version for new info ioctl requests drm/radeon: fix eDP clk and lane setup for scaled modes drm/radeon: add new INFO ioctl requests drm/radeon/dce32+: use fractional fb dividers for high clocks drm/radeon: use cached memory when evicting for vram on non agp drm/radeon: add a CS flag END_OF_FRAME drm/radeon: stop page faults from hanging the system (v2) drm/radeon/dce4/5: add registers for ELD handling drm/radeon/dce3.2: add registers for ELD handling radeon: fix pll/ctrc mapping on dce2 and dce3 hardware Linux 3.7-rc7 powerpc/eeh: Do not invalidate PE properly Revert "drm/i915: enable rc6 on ilk again" ALSA: hda - Fix build without CONFIG_PM of/address: sparc: Declare of_iomap as an extern function for sparc again PM / QoS: fix wrong error-checking condition bnx2x: remove redundant warning log vxlan: fix command usage in its doc 8139cp: revert "set ring address before enabling receiver" MPI: Fix compilation on MIPS with GCC 4.4 and newer ... Conflicts: drivers/gpu/drm/exynos/exynos_drm_encoder.c drivers/gpu/drm/exynos/exynos_drm_fbdev.c drivers/gpu/drm/nouveau/core/engine/disp/nv50.c
2012-12-10drm/i915: add support for mPHY destination on intel_sbi_{read, write}Paulo Zanoni
This way we should be able to write mPHY registers using the Sideband Interface in the next commit. Also fixed some syntax oddities in the related code. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-08drm/i915: reject modes the LPT FDI receiver can't handlePaulo Zanoni
More specifically, the LPT FDI RX only supports 8bpc and a maximum of 2 lanes, so anything above that won't work and should be rejected. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-08drm/i915: fix hsw_fdi_link_train "retry" codePaulo Zanoni
We were previously doing exactly what the "mode set sequence for CRT" document mandates, but whenever we failed to train the link in the first tentative, all the other subsequent retries always failed. In one of my monitors that has 47 modes, I was usually getting around 3 failures when running "testdisplay -a". After this patch, even if we fail in the first tentative, we can succeed in the next ones. So now when running "testdisplay -a" I see around 3 times the message "FDI link training done on step 1" and no failures. Notice that now the "retry" code looks a lot like the DP retry code. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-06drm/i915: Close race between processing unpin task and queueing the flipChris Wilson
Before queuing the flip but crucially after attaching the unpin-work to the crtc, we continue to setup the unpin-work. However, should the hardware fire early, we see the connected unpin-work and queue the task. The task then promptly runs and unpins the fb before we finish taking the required references or even pinning it... Havoc. To close the race, we use the flip-pending atomic to indicate when the flip is finally setup and enqueued. So during the flip-done processing, we can check more accurately whether the flip was expected. v2: Add the appropriate mb() to ensure that the writes to the page-flip worker are complete prior to marking it active and emitting the MI_FLIP. On the read side, the mb should be enforced by the spinlocks. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org [danvet: Review the barriers a bit, we need a write barrier both before and after updating ->pending. Similarly we need a read barrier in the interrupt handler both before and after reading ->pending. With well-ordered irqs only one barrier in each place should be required, but since this patch explicitly sets out to combat spurious interrupts with is staged activation of the unpin work we need to go full-bore on the barriers, too. Discussed with Chris Wilson on irc and changes acked by him.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-05drm/i915: fixup l3 parity sysfs access checkDaniel Vetter
When l3 parity support for Haswell was enabled in commit f27b92651d72e863c308ea5dca5615fc98e38ca6 Author: Ben Widawsky <benjamin.widawsky@intel.com> Date: Tue Jul 24 20:47:32 2012 -0700 drm/i915: Expand DPF support to Haswell no one noticed that the patch which introduced this macro commit e1ef7cc299839e68dae3f1843f62e52acda04538 Author: Ben Widawsky <benjamin.widawsky@intel.com> Date: Tue Jul 24 20:47:31 2012 -0700 drm/i915: Macro to determine DPF support missed one spot. Fix this. Cc: Ben Widawsky <benjamin.widawsky@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57441 Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-04drm/i915: Clear the existing watermarks for g4x when modifying the cursor srChris Wilson
In a couple of places we attempt to adjust the existing watermark registers to update them for the new cursor watermarks. This goes horribly wrong as instead of clearing the cursor bits prior to or'ing in the new values, we clear the rest of the register with the result that the watermark registers contain bogus values. References: https://bugs.freedesktop.org/show_bug.cgi?id=47034 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-04drm/i915: do not access BLC_PWM_CTL2 on pre-gen4 hardwareJani Nikula
The BLC_PWM_CTL2 register does not exist before gen4. While at it, do a slight drive by cleanup of the code. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-03drm/i915: Don't allow ring tail to reach the same cacheline as headVille Syrjälä
From BSpec: "If the Ring Buffer Head Pointer and the Tail Pointer are on the same cacheline, the Head Pointer must not be greater than the Tail Pointer." The easiest way to enforce this is to reduce the reported ring space. References: Gen2 BSpec "1. Programming Environment" / 1.4.4.6 "Ring Buffer Use" Gen3 BSpec "vol1c Memory Interface Functions" / 2.3.4.5 "Ring Buffer Use" Gen4+ BSpec "vol1c Memory Interface and Command Stream" / 5.3.4.5 "Ring Buffer Use" v2: Include the exact BSpec references in the description v3: s/64/I915_RING_FREE_SPACE, and add the BSpec information to the code Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-03drm/i915: Decouple the object from the unbound list before freeing pagesChris Wilson
As we may actually allocate in order to save the physical swizzling bits during the free, we have to be careful not to trigger the shrinker on the same object. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Added a small comment in the code to really drive the scariness of this patch home.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-30drm/i915: One more drm_connector_property -> drm_object_propertyRob Clark
One new drm_connector_attach_property() snuck in after the initial patch was written. Signed-off-by: Rob Clark <rob@ti.com>
2012-11-29drm/i915: Set sync_seqno properly after seqno wrapMika Kuoppala
i915_gem_handle_seqno_wrap() will zero all sync_seqnos but as the wrap can happen inside ring->sync_to(), pre wrap seqno was carried over and overwrote the zeroed sync_seqno. When wrap is handled, all outstanding requests will be retired and objects moved to inactive queue, causing their last_read_seqno to be zero. Use this to update the sync_seqno correctly. RING_SYNC registers after wrap will contain pre wrap values which are >= seqno. So injecting the semaphore wait into ring completes immediately. Original idea for using last_read_seqno from Chris Wilson. Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-29drm/i915: Include the last semaphore sync point in the error-stateChris Wilson
Should be useful to know what the driver thought the other ring's seqno was when it last used a semaphore. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-29drm/i915: Rearrange code to only have a single method for waiting upon the ringChris Wilson
Replace the wait for the ring to be clear with the more common wait for the ring to be idle. The principle advantage is one less exported intel_ring_wait function, and the removal of a hardcoded value. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-29drm/i915: Simplify flushing activity on the ringChris Wilson
As we now always preallocate the seqno before writing to the ring, we can trivially test if we have any pending activity on the ring by inspecting the olr. This makes it then possible to flush operations that are not normally associated with a request, like power-management. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-29drm/i915: Preallocate next seqno before touching the ringChris Wilson
Based on the work by Mika Kuoppala, we realised that we need to handle seqno wraparound prior to committing our changes to the ring. The most obvious point then is to grab the seqno inside intel_ring_begin(), and then to reuse that seqno for all ring operations until the next request. As intel_ring_begin() can fail, the callers must already be prepared to handle such failure and so we can safely add further checks. This patch looks like it should be split up into the interface changes and the tweaks to move seqno wrapping from the execbuffer into the core seqno increment. However, I found no easy way to break it into incremental steps without introducing further broken behaviour. v2: Mika found a silly mistake and a subtle error in the existing code; inside i915_gem_retire_requests() we were resetting the sync_seqno of the target ring based on the seqno from this ring - which are only related by the order of their allocation, not retirement. Hence we were applying the optimisation that the rings were synchronised too early, fortunately the only real casualty there is the handling of seqno wrapping. v3: Do not forget to reset the sync_seqno upon module reinitialisation, ala resume. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=863861 Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> [v2] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-29drm/i915: force restore on lid openDaniel Vetter
There seem to be indeed some awkwards machines around, mostly those without OpRegion support, where the firmware changes the display hw state behind our backs when closing the lid. This force-restore logic has been originally introduced in commit c1c7af60892070e4b82ad63bbfb95ae745056de0 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Thu Sep 10 15:28:03 2009 -0700 drm/i915: force mode set at lid open time but after the modeset-rework we've disabled it in the vain hope that it's no longer required: commit 3b7a89fce3e3dc96b549d6d829387b4439044d0d Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Sep 17 22:27:21 2012 +0200 drm/i915: fix OOPS in lid_notify Alas, no. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54677 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57434 Tested-by: Krzysztof Mazur <krzysiek@podlesie.net> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-29drm/i915: Wait upon the last request seqno, rather than a future seqnoChris Wilson
In commit 69c2fc891343cb5217c866d10709343cff190bdc Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Jul 20 12:41:03 2012 +0100 drm/i915: Remove the per-ring write list the explicit flush was removed from i915_ring_idle(). However, we continued to wait upon the next seqno which now did not correspond to any request (except for the unusual condition of a failure to queue a request after execbuffer) and so would wait indefinitely. This has an important side-effect that i915_gpu_idle() does not cause the seqno to be incremented. This is vital if we are to be able to idle the GPU to handle seqno wraparound, as in subsequent patches. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-29drm/i915: fix possible NULL dereference of dev_privMika Kuoppala
Dereference dev_priv only after we know it is valid. Found with smatch. Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-29drm/i915: Increase the response time for slow SDVO devicesChris Wilson
Some devices may respond very slowly and only flag that the reply is pending within the first 15us response window. Be kind to such devices and wait a further 15ms, before checking for the pending reply. This moves the existing special case delay of 30ms down from the detection routine into the common path and pretends to explain it... v2: Simplify the loop constructs as suggested by Jani Nikula. References: https://bugs.freedesktop.org/show_bug.cgi?id=36997 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-29drm/i915: set the VIC of the mode on the AVI InfoFramePaulo Zanoni
We currently set "0" as the VIC value of the AVI InfoFrames. According to the specs this should be fine and work for every mode, so to my point of view we can't consider the current behavior as a bug. The problem is that we recently received a bug report (Kernel bug #50371) from a user that has an AV receiver that gives a black screen for any mode with VIC set to 0. So in order to make at least some modes work for him, this patch sets the correct VIC number when sending AVI InfoFrames. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=50371 Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-29drm/i915: Fix pte updates in ggtt clear rangeBen Widawsky
This bug was introduced by me: commit e76e9aebcdbfebae8f4cd147e3c0f800d36e97f3 Author: Ben Widawsky <ben@bwidawsk.net> Date: Sun Nov 4 09:21:27 2012 -0800 drm/i915: Stop using AGP layer for GEN6+ The existing code uses memset_io which follows memset semantics in only guaranteeing a write of individual bytes. Since a PTE entry is 4 bytes, this can only be correct if the scratch page address is 0. This caused unsightly errors when we clear the range at load time, though I'm not really sure what the heck is referencing that memory anyway. I caught this is because I believe we have some other bug where the display is doing reads of memory we feel should be cleared (or we are relying on scratch pages to be a specific value). Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-25Revert "drm/i915: enable rc6 on ilk again"Chris Wilson
Even with the cumulative set of ilk w/a, rc6 is demonstrably still failing and causing GPU hangs as found by Peter Wu. So we need to disable it again until it is stable. This reverts commit 456470eb583f063ee84c6818251e638598be0fb8 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Aug 8 23:35:40 2012 +0200 drm/i915: enable rc6 on ilk again and the follow-on commit cd7988eea561a70a4f98e431c1395f913672d626 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sun Aug 26 20:33:18 2012 +0200 drm/i915: disable rc6 on ilk when vt-d is enabled Note: The situation around the gen4/5 gpu hangs that cropped up in 3.7 is rather strange. Most useful bisects have lead to commit 6c085a728cf000ac1865d66f8c9b52935558b328 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Aug 20 11:40:46 2012 +0200 drm/i915: Track unbound pages or even later commits that affect the gem bo recycling, which all is way past the point where we re-enabled rc6. But somehow reverting/disabling those commits doesn't help, but disabling rc6 at least helps for many hangs on ilk. Obviously it doesn't change anything at all on gen4, and there are still strange issues left on gen5 (which we unfortunately can't readily reproduce). Also, the error_state signature of the hangs which can be fixed with this patch look remarkably different to those which seem to be unaffected by the rc6 settings: The rc6 hangs are in the ring, somewhere in the MI_FLUSH/PIPE_CONTROL sequence to make ilk coherent, wheras all the other hangs tend to be at a random point in the middle of the user batch. So it could also be that we have different issues. Until we grow more clue, this at least helps some users. Reported-by: Peter Wu <lekensteyn@gmail.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=55984 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Added note with some more details about the gen4/5 3.7 gpu hang regression.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-23drm/i915: promote Haswell to full supportPaulo Zanoni
Since it should be working a little bit better now. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-22drm/i915: Report the origin of the LVDS fixed panel modeChris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: resolve conflict around the call to intel_crtc_mode_get. And add the missing NULL check Chris spotted while at it.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-22drm/i915: LVDS fallback to fixed-mode if EDID not presentChris Wilson
Use the recorded panel fixed-mode to populate the get_modes() request in the absence of an EDID. Fixes regression from commit 9cd300e038d492af4990b04e127e0bd2df64b1ca Author: Jani Nikula <jani.nikula@intel.com> Date: Fri Oct 19 14:51:52 2012 +0300 drm/i915: Move cached EDID to intel_connector Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: Drop the retval-changing hunk, as suggested by Jani in his review and acked by Chris.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-22drm/i915: do not default to 18 bpp for eDP if missing from VBTJani Nikula
commit 500a8cc466a24e2fbc4c86ef9c6467ae2ffdeb0c Author: Zhenyu Wang <zhenyuw@linux.intel.com> Date: Wed Jan 13 11:19:52 2010 +0800 drm/i915: parse eDP panel color depth from VBT block originally introduced parsing bpp for eDP from VBT, with a default of 18 bpp if the eDP BIOS data block is not present. Turns out that default seems to break the Macbook Pro with retina display, as noted in commit 4344b813f105a19f793f1fd93ad775b784648b95 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Aug 10 11:10:20 2012 +0200 drm/i915: ignore eDP bpc settings from vbt Since we can't ignore bpc settings from VBT completely after all, get rid of the default. Do not clamp eDP to 18 bpp by default if the eDP BDB is missing from VBT. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Henrik Rydberg <rydberg@euromail.se> [danvet: paste in the updated commit message from irc.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-22drm/i915/sdvo: kfree the intel_sdvo_connector, not drm_connector, on destroyJani Nikula
Since the base fields in both struct intel_connector and struct intel_sdvo_connector are at the beginning of the enclosing struct, the pointers are essentially the same, but there is no requirement or guarantee that this is always the case. Kfree the enclosing intel_sdvo_connector pointer that was originally allocated, not the enclosed drm_connector, in case someone ever rearranges the structs. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-21drm/i915: drm_connector_property -> drm_object_propertyRob Clark
v2: Rebased. Signed-off-by: Rob Clark <rob@ti.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> (v1) [danvet: Pimp commit message a bit.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-21drm/i915: use drm_send_vblank_event() helperRob Clark
Signed-off-by: Rob Clark <rob@ti.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-21drm/i915: Use pci_resource functions for BARs.Ben Widawsky
This was leftover crap from kill-agp. The current code is theoretically broken for 64b bars. (I resist removing theoretically because I am too lazy to test). We still need to ioremap things ourselves because we want to ioremap_wc the PTEs. v2: Forgot to kill the tmp variable in v1 CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-21drm/i915: Borrow our struct_mutex for the direct reclaimChris Wilson
If we have hit oom whilst holding our struct_mutex, then currently we cannot reap our own GPU buffers which likely pin most of memory, making an outright OOM more likely. So if we are running in direct reclaim and already hold the mutex, attempt to free buffers knowing that the original function can not continue until we return. v2: Add a note explaining that the mutex may be stolen due to pre-emption, and that is bad. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-21drm/i915: Defer assignment of obj->gtt_space until after all possible mallocsChris Wilson
As we may invoke the shrinker whilst trying to allocate memory to hold the gtt_space for this object, we need to be careful not to mark the drm_mm_node as activated (by assigning it to this object) before we have finished our sequence of allocations. Note: We also need to move the binding of the object into the actual pagetables down a bit. The best way seems to be to move it out into the callsites. Reported-by: Imre Deak <imre.deak@gmail.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Added small note to commit message to summarize review discussion.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-21drm/i915: Apply the IBX transcoder A w/a for HDMI to SDVO as wellChris Wilson
As the SDVO/HDMI registers are multiplex, it is safe to assume that the w/a required for HDMI on IbexPoint, namely that the SDVO register cannot both be disabled and have selected transcoder B, is also required for SDVO. At least the modeset state checker detects that the transcoder selection is left in the undefined state, and so it appears sensible to apply the w/a: [ 1814.480052] WARNING: at drivers/gpu/drm/i915/intel_display.c:1487 assert_pch_hdmi_disabled+0xad/0xb5() [ 1814.480053] Hardware name: Libretto W100 [ 1814.480054] IBX PCH hdmi port still using transcoder B Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=57066 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-21drm/i915: implement WaMbcDriverBootEnable on HaswellPaulo Zanoni
Also document the WA name for the previous gens that implement it. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-21drm/i915: fix intel_ddi_get_cdclk_freq for ULT machinesPaulo Zanoni
For now, this code is just used by the eDP AUX channel frequency. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-21drm/i915: make the panel fitter work on pipes B and C on HaswellPaulo Zanoni
This goes on a separate patch since it won't apply on the stable trees and there's nothing using panel fitter on HSW on the older Kernels. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-21drm/i915: make the panel fitter work on pipes B and C on IVBPaulo Zanoni
I actually found this problem on Haswell, but then discovered Ivy Bridge also has it by reading the spec. I don't have the hardware to test this. Cc: stable@vger.kernel.org Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-21drm/i915: don't intel_crt_init if DDI A has 4 lanesPaulo Zanoni
DDI A and E have 4 lanes to share, so if DDI A is using 4 lanes, there's nothing left for DDI E, which means there's no CRT port on the machine. The bit we're checking here is programmed at system boot and it cannot be changed afterwards, so we cannot change the amount of lanes reserved for each DDI port. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-21drm/i915: make DP work on LPT-LP machinesPaulo Zanoni
We need to enable a special bit, otherwise none of the DP functions requiring the PCH will work. Version 2: store the PCH ID inside dev_priv, as suggested by Daniel Vetter. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-21drm/i915: fix false positive "Unclaimed write" messagesPaulo Zanoni
We don't check if the "unclaimed register" bit is set before we call writel, so if it was already set before, we might print a misleading message about "unclaimed write" on the wrong register. This patch makes us check the unclaimed bit before the writel, so we can print a new "Unknown unclaimed register before writing to %x" message. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-21drm/i915: use cpu/pch transcoder on intel_enable_pipePaulo Zanoni
This function runs on Haswell, so set the correct pch_transcoder and cpu_transcoder variables. This fixes an assertion failure on Haswell VGA. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-21drm/i915: don't limit Haswell CRT encoder to pipe APaulo Zanoni
This is a full revert of 59c859d6f2e78344945e8a8406a194156176bc4e: drm/i915: account for only one PCH receiver on Haswell Now that the PCH code is fixed to be able use the only PCH transcoder independently of the pipe and CPU transcoder, we can revert this. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Resolve conflict due to the rebasing of dinq on top of drm-next.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-21drm/i915: Flush outstanding unpin tasks before pageflippingChris Wilson
If we accumulate unpin tasks because we are pageflipping faster than the system can schedule its workers, we can effectively create a pin-leak. The solution taken here is to limit the number of unpin tasks we have per-crtc and to flush those outstanding tasks if we accumulate too many. This should prevent any jitter in the normal case, and also prevent the hang if we should run too fast. Note: It is important that we switch from the system workqueue to our own dev_priv->wq since all work items on that queue are guaranteed to only need the dev->struct_mutex and not any modeset resources. For otherwise if we have a work item ahead in the queue which needs the modeset lock (like the output detect work used by both polling or hpd), this work and so the unpin work will never execute since the pageflip code already holds that lock. Unfortunately there's no lockdep support for this scenario in the workqueue code. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46991 Reported-and-tested-by: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Added note about workqueu deadlock.] Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56337 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-15 00:43:53 +0000