summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm
AgeCommit message (Collapse)Author
2014-07-08drm: Constify struct drm_fb_helper_funcsThierry Reding
There's no need for this to be modifiable. Make it const so that it can be put into the .rodata section. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08drm/fb-helper: Fix hpd vs. initial config racesDaniel Vetter
Some drivers need to be able to have a perfect race-free fbcon setup. Current drivers only enable hotplug processing after the call to drm_fb_helper_initial_config which leaves a tiny but important race. This race is especially noticable on embedded platforms where the driver itself enables the voltage for the hdmi output, since only then will monitors (after a bit of delay, as usual) respond by asserting the hpd pin. Most of the infrastructure is already there with the split-out drm_fb_helper_init. And drm_fb_helper_initial_config already has all the required locking to handle concurrent hpd events since commit 53f1904bced78d7c00f5d874c662ec3ac85d0f9f Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Mar 20 14:26:35 2014 +0100 drm/fb-helper: improve drm_fb_helper_initial_config locking The only missing bit is making drm_fb_helper_hotplug_event save against concurrent calls of drm_fb_helper_initial_config. The only unprotected bit is the check for fb_helper->fb. With that drivers can first initialize the fb helper, then enabel hotplug processing and then set up the initial config all in a completely race-free manner. Update kerneldoc and convert i915 as a proof of concept. Feature requested by Thierry since his tegra driver atm reliably boots slowly enough to misses the hotplug event for an external hdmi screen, but also reliably boots to quickly for the hpd pin to be asserted when the fb helper calls into the hdmi ->detect function. Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08ttm: use NULL instead of 0 for ttm_bo_reserve()'s pointer arg.Martin Kepplinger
Fix a sparse warning: ttm_bo_reserve()'s last argument is a pointer to a struct, so use NULL as nullpointer. Signed-off-by: Martin Kepplinger <martink@posteo.de> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08drm/tilcdc: replace late_initcall with module_initGuido Martínez
Use module_init instead of late_initcall, as is the norm for modular drivers. module_init was used until 6e8de0bd6a51fdeebd5d975c4fcc426f730b339b ("drm/tilcdc: add encoder slave (v2)") changed it to a late_initcall, but it does not explain why. Tests show it's working properly with module_init. Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Tested-by: Darren Etheridge <detheridge@ti.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08drm/tilcdc: remove submodule destroy callsGuido Martínez
The TI tilcdc driver is designed with a notion of submodules. Currently, at unload time, these submodules are iterated and destroyed. Now that the tilcdc remove order is fixed, this can be handled perfectly by the kernel using the device infrastructure, since each submodule is a kernel driver itself, and they are only destroy()'ed at unload time. Therefore we move the destroy() functionality to each submodule's remove(). Also, remove some checks in the unloading process since the new code guarantees the resources are allocated and need a release. Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Tested-by: Darren Etheridge <detheridge@ti.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08drm/tilcdc: fix double kfreeGuido Martínez
display_timings_release calls kfree on the display_timings object passed to it. Calling kfree after it is wrong. SLUB debug showed the following warning: ============================================================================= BUG kmalloc-64 (Tainted: G W ): Object already free ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in of_get_display_timings+0x2c/0x214 age=601 cpu=0 pid=884 __slab_alloc.constprop.79+0x2e0/0x33c kmem_cache_alloc+0xac/0xdc of_get_display_timings+0x2c/0x214 panel_probe+0x7c/0x314 [tilcdc] platform_drv_probe+0x18/0x48 [..snip..] INFO: Freed in panel_destroy+0x18/0x3c [tilcdc] age=0 cpu=0 pid=907 __slab_free+0x34/0x330 panel_destroy+0x18/0x3c [tilcdc] tilcdc_unload+0xd0/0x118 [tilcdc] drm_dev_unregister+0x24/0x98 [..snip..] Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Tested-by: Darren Etheridge <detheridge@ti.com> Cc: <stable@vger.kernel.org> #v3.9+ Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08drm/tilcdc: fix release order on exitGuido Martínez
Unregister resources in the correct order on tilcdc_drm_fini, which is the reverse order they were registered during tilcdc_drm_init. This also means unregistering the driver before releasing its resources. Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Tested-by: Darren Etheridge <detheridge@ti.com> Cc: <stable@vger.kernel.org> #v3.9+ Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08drm/tilcdc: panel: fix leak when unloading the moduleGuido Martínez
The driver did not unregister the allocated framebuffer, which caused memory leaks (and memory manager WARNs) when unloading. Also, the framebuffer device under /dev still existed after unloading. Add a call to drm_fbdev_cma_fini when unloading the module to prevent both issues. Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Tested-by: Darren Etheridge <detheridge@ti.com> Cc: <stable@vger.kernel.org> #v3.9+ Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08drm/tilcdc: tfp410: fix dangling sysfs connector nodeGuido Martínez
Add a drm_sysfs_connector_remove call when we destroy the panel to make sure the connector node in sysfs gets deleted. This is required for proper unload and re-load of this driver, otherwise we will get a warning about a duplicate filename in sysfs. Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Tested-by: Darren Etheridge <detheridge@ti.com> Cc: <stable@vger.kernel.org> #v3.9+ Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08drm/tilcdc: slave: fix dangling sysfs connector nodeGuido Martínez
Add a drm_sysfs_connector_remove call when we destroy the panel to make sure the connector node in sysfs gets deleted. This is required for proper unload and re-load of this driver as a module. Without this, we would get a warning at re-load time like so: tda998x 0-0070: found TDA19988 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 825 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x54/0x74() sysfs: cannot create duplicate filename '/class/drm/card0-HDMI-A-1' Modules linked in: [..] CPU: 0 PID: 825 Comm: modprobe Not tainted 3.15.0-rc4-00027-g9dcdef4 #82 [<c0013bb8>] (unwind_backtrace) from [<c0011824>] (show_stack+0x10/0x14) [<c0011824>] (show_stack) from [<c0034e8c>] (warn_slowpath_common+0x68/0x88) [<c0034e8c>] (warn_slowpath_common) from [<c0034edc>] (warn_slowpath_fmt+0x30/0x40) [<c0034edc>] (warn_slowpath_fmt) from [<c01243f4>] (sysfs_warn_dup+0x54/0x74) [<c01243f4>] (sysfs_warn_dup) from [<c0124708>] (sysfs_do_create_link_sd.isra.2+0xb0/0xb8) [<c0124708>] (sysfs_do_create_link_sd.isra.2) from [<c02ae37c>] (device_add+0x338/0x520) [<c02ae37c>] (device_add) from [<c02ae6e8>] (device_create_groups_vargs+0xa0/0xc4) [<c02ae6e8>] (device_create_groups_vargs) from [<c02ae758>] (device_create+0x24/0x2c) [<c02ae758>] (device_create) from [<c029b4ec>] (drm_sysfs_connector_add+0x64/0x204) [<c029b4ec>] (drm_sysfs_connector_add) from [<bf0b1b40>] (slave_modeset_init+0x120/0x1bc [tilcdc]) [<bf0b1b40>] (slave_modeset_init [tilcdc]) from [<bf0b2be8>] (tilcdc_load+0x214/0x4c0 [tilcdc]) [<bf0b2be8>] (tilcdc_load [tilcdc]) from [<c029955c>] (drm_dev_register+0xa4/0x104) [..snip..] ---[ end trace 4df8d614936ebdee ]--- [drm:drm_sysfs_connector_add] *ERROR* failed to register connector device: -17 Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Tested-by: Darren Etheridge <detheridge@ti.com> Cc: <stable@vger.kernel.org> #v3.9+ Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08drm/tilcdc: panel: fix dangling sysfs connector nodeGuido Martínez
Add a drm_sysfs_connector_remove call when we destroy the panel to make sure the connector node in sysfs gets deleted. This is required for proper unload and re-load of this driver as a module. Without this, we would get a warning at re-load time like so: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 824 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x54/0x74() sysfs: cannot create duplicate filename '/class/drm/card0-LVDS-1' Modules linked in: [...] CPU: 0 PID: 824 Comm: modprobe Not tainted 3.15.0-rc4-00027-g6484f96-dirty #81 [<c0013bb8>] (unwind_backtrace) from [<c0011824>] (show_stack+0x10/0x14) [<c0011824>] (show_stack) from [<c0034e8c>] (warn_slowpath_common+0x68/0x88) [<c0034e8c>] (warn_slowpath_common) from [<c0034edc>] (warn_slowpath_fmt+0x30/0x40) [<c0034edc>] (warn_slowpath_fmt) from [<c01243f4>] (sysfs_warn_dup+0x54/0x74) [<c01243f4>] (sysfs_warn_dup) from [<c0124708>] (sysfs_do_create_link_sd.isra.2+0xb0/0xb8) [<c0124708>] (sysfs_do_create_link_sd.isra.2) from [<c02ae37c>] (device_add+0x338/0x520) [<c02ae37c>] (device_add) from [<c02ae6e8>] (device_create_groups_vargs+0xa0/0xc4) [<c02ae6e8>] (device_create_groups_vargs) from [<c02ae758>] (device_create+0x24/0x2c) [<c02ae758>] (device_create) from [<c029b4ec>] (drm_sysfs_connector_add+0x64/0x204) [<c029b4ec>] (drm_sysfs_connector_add) from [<bf0b1fec>] (panel_modeset_init+0xb8/0x134 [tilcdc]) [<bf0b1fec>] (panel_modeset_init [tilcdc]) from [<bf0b2bf0>] (tilcdc_load+0x214/0x4c0 [tilcdc]) [<bf0b2bf0>] (tilcdc_load [tilcdc]) from [<c029955c>] (drm_dev_register+0xa4/0x104) [ .. snip .. ] ---[ end trace b2d09cd9578b0497 ]--- [drm:drm_sysfs_connector_add] *ERROR* failed to register connector device: -17 Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Tested-by: Darren Etheridge <detheridge@ti.com> Cc: <stable@vger.kernel.org> #v3.9+ Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08drm/crtc-helper: use drm_framebuffer flagsFabien DESSENNE
The "flags" parameter of the DRM_IOCTL_MODE_ADDFB2 ioctl must be propagated and used by the driver. The only possible value of flags is DRM_MODE_FB_INTERLACED. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Reviewed-by: Benjamin GAIGNARD <benjamin.gaignard@st.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08drm/ttm: fix handling of TTM_PL_FLAG_TOPDOWN v2Christian König
bo->mem.placement is not initialized when ttm_bo_man_get_node is called, so the flag had no effect at all. v2: change nouveau and vmwgfx as well Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-08Merge branch 'drm-next' of git://people.freedesktop.org/~dvdhrm/linux into ↵Dave Airlie
drm-next * 'drm-next' of git://people.freedesktop.org/~dvdhrm/linux: drm/omap: remove null test before kfree drm/bochs: replace ALIGN(PAGE_SIZE) by PAGE_ALIGN drm/ttm: recognize ARM arch in ioprot handler drm: enable render-nodes by default drm/ttm: remove declaration of ttm_tt_cache_flush drm/gem: remove misleading gfp parameter to get_pages() drm/omap: use __GFP_DMA32 for shmem-backed gem drm/i915: use shmem helpers if possible Conflicts: drivers/gpu/drm/drm_stub.c
2014-07-08Merge tag 'topic/core-stuff-2014-06-30' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next misc core patches picked up by Daniel and Jani. * tag 'topic/core-stuff-2014-06-30' of git://anongit.freedesktop.org/drm-intel: drm/fb-helper: Remove unnecessary list empty check in drm_fb_helper_debug_enter() drm/fb-helper: Redundant info->fix.type_aux setting in drm_fb_helper_fill_fix() drm/debugfs: add an "edid_override" file per connector drm/debugfs: add a "force" file per connector drm: add register and unregister functions for connectors drm: fix uninitialized acquire_ctx fields (v2) drm: Driver-specific ioctls range from 0x40 to 0x9f drm: Don't export internal module variables
2014-07-08Merge tag 'vmwgfx-next-2014-07-04' of ↵Dave Airlie
git://people.freedesktop.org/~thomash/linux into drm-next Pull request of 2014-07-04 * tag 'vmwgfx-next-2014-07-04' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Fix compat shader namespace
2014-07-08drm/omap: remove null test before kfreeFabian Frederick
Fix checkpatch warning: WARNING: kfree(NULL) is safe this check is probably not required Cc: David Airlie <airlied@linux.ie> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
2014-07-08drm/bochs: replace ALIGN(PAGE_SIZE) by PAGE_ALIGNFabian Frederick
use mm.h definition Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
2014-07-08drm/ttm: recognize ARM arch in ioprot handlerLucas Stach
Nouveau can now be used on ARM, so add an ioprot handler for this architecture. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
2014-07-08drm: enable render-nodes by defaultDavid Herrmann
We introduced render-nodes about 1/2 year ago and no problems showed up. Remove the drm_rnodes argument and enable them by default now. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
2014-07-08drm/gem: remove misleading gfp parameter to get_pages()David Herrmann
drm_gem_get_pages() currently allows passing a 'gfp' parameter that is passed to shmem combined with mapping_gfp_mask(). Given that the default mapping_gfp_mask() is GFP_HIGHUSER, it is _very_ unlikely that anyone will ever make use of that parameter. In fact, all drivers currently pass redundant flags or 0. This patch removes the 'gfp' parameter. The only reason to keep it is to remove flags like __GFP_WAIT. But in its current form, it can only be used to add flags. So to remove __GFP_WAIT, you'd have to drop it from the mapping_gfp_mask, which again is stupid as this mask is used by shmem-core for other allocations, too. If any driver ever requires that parameter, we can introduce a new helper that takes the raw 'gfp' parameter. The caller'd be responsible to combine it with mapping_gfp_mask() in a suitable way. The current drm_gem_get_pages() helper would then simply use mapping_gfp_mask() and call the new helper. This is what shmem_read_mapping_pages{_gfp,} does right now. Moreover, the gfp-zone flag-usage is not obvious: If you pass a modified zone, shmem core will WARN() or even BUG(). In other words, the following must be true for 'gfp' passed to shmem_read_mapping_pages_gfp(): gfp_zone(mapping_gfp_mask(mapping)) == gfp_zone(gfp) Add a comment to drm_gem_read_pages() explaining that constraint. Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
2014-07-08drm/omap: use __GFP_DMA32 for shmem-backed gemDavid Herrmann
OMAP requires bo-pages to be in the DMA32 zone. Explicitly request this by setting __GFP_DMA32 as mapping-gfp-mask during shmem initialization. This drops HIGHMEM from the gfp-mask and uses DMA32 instead. shmem-core takes care to relocate pages during swap-in in case they have been loaded into the wrong zone. It is _not_ possible to pass __GFP_DMA32 to shmem_read_mapping_page_gfp() as the page might have already been swapped-in at that time. The zone-mask must be set during initialization and be kept constant for now. Remove the now superfluous TODO in omap_gem.c. Reviewed-by: Rob Clark <robdclark@gmail.com> Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
2014-07-06Merge tag 'drm-intel-fixes-2014-07-03' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel Fixes for 3.16-rc3; most importantly Jesse brings back VGA he took away on a bunch of machines. Also a vblank fix for BDW and a power workaround fix for VLV. * tag 'drm-intel-fixes-2014-07-03' of git://anongit.freedesktop.org/drm-intel: drm/i915: Drop early VLV WA to fix Voltage not getting dropped to Vmin drm/i915: only apply crt_present check on VLV drm/i915: Wait for vblank after enabling the primary plane on BDW
2014-07-06Merge branch 'vmwgfx-fixes-3.16' of git://people.freedesktop.org/~thomash/linuxDave Airlie
fix to a 3.15 commit. * 'vmwgfx-fixes-3.16' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Fix incorrect write to read-only register v2:
2014-07-06Merge branch 'tda998x-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cuboxDave Airlie
mode fixes for tda998x. * 'tda998x-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox: drm/i2c: tda998x: add some basic mode validation drm/i2c: tda998x: faster polling for edid drm/i2c: tda998x: move drm_i2c_encoder_destroy call
2014-07-04Merge tag 'sound-3.16-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This contains a few fixes for HD-audio: yet another Dell headset pin quirk, a fixup for Thinkpad T540P, and an improved fix for Haswell/Broadwell HDMI clock setup" * tag 'sound-3.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - restore BCLK M/N value as per CDCLK for HSW/BDW display HDA controller drm/i915: provide interface for audio driver to query cdclk ALSA: hda - Add a fixup for Thinkpad T540p ALSA: hda - Add another headset pin quirk for some Dell machines
2014-07-04drm/vmwgfx: Fix compat shader namespaceThomas Hellstrom
Contrary to the host-backed shader interface that has a per-context name-space for shaders, the compat shader namespace was per client (or rather, per file). Fix this so that the compat shader namespace is per context, and at the same time, make command buffer managed context resource management generic. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
2014-07-04drm/i915: provide interface for audio driver to query cdclkJani Nikula
For Haswell and Broadwell, if the display power well has been disabled, the display audio controller divider values EM4 M VALUE and EM5 N VALUE will have been lost. The CDCLK frequency is required for reprogramming them to generate 24MHz HD-A link BCLK. So provide a private interface for the audio driver to query CDCLK. This is a stopgap solution until a more generic interface between audio and display drivers has been implemented. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-07-03drm/vmwgfx: Fix incorrect write to read-only register v2:Thomas Hellstrom
Commit "drm/vmwgfx: correct fb_fix_screeninfo.line_length", while fixing a vmwgfx fbdev bug, also writes the pitch to a supposedly read-only register: SVGA_REG_BYTES_PER_LINE, while it should be (and also in fact is) written to SVGA_REG_PITCHLOCK. This patch is Cc'd stable because of the unknown effects writing to this register might have, particularly on older device versions. v2: Updated log message. Cc: stable@vger.kernel.org Cc: Christopher Friedt <chrisfriedt@gmail.com> Tested-by: Christopher Friedt <chrisfriedt@gmail.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
2014-07-03Merge branch 'drm-fixes-3.16' of git://people.freedesktop.org/~agd5f/linuxDave Airlie
misc fixes, output fixes for 4k monitor, dpm lockup fixes * 'drm-fixes-3.16' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: page table BOs are kernel allocations drm/radeon/cik: fix typo in EOP packet drm/radeon: Track the status of a page flip more explicitly drm/radeon/dpm: fix vddci setup typo on cayman drm/radeon/dpm: fix typo in vddci setup for eg/btc drm/radeon: use RADEON_MAX_CRTCS, RADEON_MAX_AFMT_BLOCKS (v2) drm/radeon: Use only one line for whole DPCD debug output drm/radeon: add a module parameter to control deep color support drm/radeon: enable bapm by default on desktop TN/RL boards drm/radeon: enable bapm by default on KV/KB drm/radeon: only apply bapm changes for AC power on ARUBA drm/radeon: adjust default dispclk on DCE6 (v2)
2014-07-03drm: fix permissions on drm_drv.cDave Airlie
1539fb9bd405ee32282ea0a38404f9e008ac5b7a managed to somehow +x drm_drv.c undo it. Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-07-02drm/radeon: page table BOs are kernel allocationsChristian König
Userspace shouldn't be able to access them. Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-07-02drm/radeon/cik: fix typo in EOP packetAlex Deucher
Volatile bit was in the wrong location. This bit is not used at the moment. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-07-01drm/radeon: Track the status of a page flip more explicitlyMichel Dänzer
This prevents a panic: radeon_crtc_handle_page_flip() could run before radeon_flip_work_func(), triggering the BUG_ON() in drm_vblank_put(). Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-07-01drm/radeon/dpm: fix vddci setup typo on caymanAlex Deucher
We were using the vddc mask rather than the vddci mask. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=79071 May also fix: https://bugs.freedesktop.org/show_bug.cgi?id=69723 Noticed by: Dieter Nützel <Dieter@nuetzel-hh.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-07-01drm/radeon/dpm: fix typo in vddci setup for eg/btcAlex Deucher
We were using the vddc mask rather than the vddci mask. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=79071 Possibly also fixes: https://bugzilla.kernel.org/show_bug.cgi?id=68571 Noticed-by: Jonathan Howard <jonathan@unbiased.name> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-07-01drm/radeon: use RADEON_MAX_CRTCS, RADEON_MAX_AFMT_BLOCKS (v2)Stefan Brüns
v2: agd5f: compile fix Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-07-01drm/radeon: Use only one line for whole DPCD debug outputStefan Brüns
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-07-01drm/radeon: add a module parameter to control deep color supportAlex Deucher
Some monitors seem to have problems with deep color enabled, even though they claim to support it. I'm not sure if the monitor need a quirk or if the driver is doing something the monitor doesn't like. At this point lets just disable deep color by default like we did for hdmi audio and work through the bugs so we can eventually enable it by default. bug: https://bugs.freedesktop.org/show_bug.cgi?id=80531 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-07-01drm/radeon: enable bapm by default on desktop TN/RL boardsAlex Deucher
bapm enabled the GPU and CPU to share TDP headroom. It was disabled by default since some laptops hung when it was enabled in conjunction with dpm. It seems to be stable on desktop boards and fixes hangs on boot with dpm enabled on certain boards, so enable it by default on desktop boards. bug: https://bugs.freedesktop.org/show_bug.cgi?id=72921 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-07-01drm/radeon: enable bapm by default on KV/KBAlex Deucher
bapm allows the GPU and CPU to share TDP. This allows for additional performance out of the GPU and CPU when the headroom is available. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-07-01drm/radeon: only apply bapm changes for AC power on ARUBAAlex Deucher
Newer asics shouldn't need any manual adjustment. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-07-01drm/radeon: adjust default dispclk on DCE6 (v2)Alex Deucher
Set the default to 600Mhz if it's not set in the bios, and bump the default to 600Mhz if it's lower than that. This fixes display issues with certain 4k DP monitors when using 5.4 Ghz DP clocks. v2: fix typo. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-07-01drm/i915: Drop early VLV WA to fix Voltage not getting dropped to VminDeepak S
Drop WA to fix Voltage not getting dropped to Vmin when Gfx is power gated for latest VLV revision. Workaround fixed in Latest VLV revision. Forcing Gfx clk up not needed, and Requesting the min freq should bring bring the voltage Vnn. v2: Drop WA for Latest VLV revision (Ville) Signed-off-by: Deepak S <deepak.s@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [Jani: modified code comment, reformatted the commit message a bit.] Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-06-30drm/i915: only apply crt_present check on VLVJesse Barnes
Apparently we can't trust this field on other platforms and need to find some other way. This fixes a regression introduced in commit 27da3bdfcf7f5233cdfe4563f53edf1ecab7cea0 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Fri Apr 4 16:12:07 2014 -0700 drm/i915: use VBT to determine whether to enumerate the VGA port Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-06-27drm/i915: Wait for vblank after enabling the primary plane on BDWVille Syrjälä
BDW signals the flip done interrupt immediately after the DSPSURF write when the plane is disabled. This is true even if we've already armed DSPCNTR to enable the plane at the next vblank. This causes major problems for our page flip code which relies on the flip done interrupts happening at vblank time. So what happens is that we enable the plane, and immediately allow userspace to submit a page flip. If the plane is still in the process of being enabled when the page flip is issued, the flip done gets signalled immediately. Our DSPSURFLIVE check catches this to prevent premature flip completion, but it also means that we don't get a flip done interrupt when the plane actually gets enabled, and so the page flip is never completed. Work around this by re-introducing blocking vblank waits on BDW whenever we enable the primary plane. I removed some of the vblank waits here: commit 6304cd91e7f05f8802ea6f91287cac09741d9c46 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Fri Apr 25 13:30:12 2014 +0300 drm/i915: Drop the excessive vblank waits from modeset codepaths To avoid these blocking vblank waits we should start using the vblank interrupt instead of the flip done interrupt to complete page flips. But that's material for another patch. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79354 Tested-by: Guo Jinxian <jinxianx.guo@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-06-27Merge tag 'drm-intel-fixes-2014-06-26' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes Fixes for 3.16-rc2; regressions, races, and warns; Broadwell PCI IDs. * tag 'drm-intel-fixes-2014-06-26' of git://anongit.freedesktop.org/drm-intel: drm/i915: vlv_prepare_pll is only needed in case of non DSI interfaces drm/i915: Hold the table lock whilst walking the file's idr and counting the objects in debugfs drm/i915: BDW: Adding Reserved PCI IDs. drm/i915: Only mark the ctx as initialised after a SET_CONTEXT operation drm/i915: default to having backlight if VBT not available drm/i915: cache hw power well enabled state
2014-06-26drm/i2c: tda998x: add some basic mode validationRussell King
The TDA998x can't handle modes with clocks above 150MHz, or resolutions larger than 8192x2048. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-26drm/i2c: tda998x: faster polling for edidRussell King
One of Jean-Francois patches changed the EDID polling to once every 10ms for 10 interations, whereas the original code did 1ms for 100 interations. This appears to cause boot-time detection to take noticably longer. Revert this change. Acked-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-26drm/i2c: tda998x: move drm_i2c_encoder_destroy callGuido Martínez
Currently tda998x_encoder_destroy() calls cec_write() and reg_clear(), as part of the release procedure. Such calls need to access the I2C bus and therefore, we need to call them before drm_i2c_encoder_destroy() which unregisters the I2C device. This commit moves the latter so it's done afterwards. Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar> Signed-off-by: Ezequiel García <ezequiel@vanguardiasur.com.ar> Cc: <stable@vger.kernel.org> #v3.9+ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-19 19:30:48 +0000