summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm
AgeCommit message (Collapse)Author
2009-01-16drm/i915: lock correct mutex around object unreference.Dave Airlie
This makes sure the mutex is held around the unreference. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-01-16drm/i915: add support for physical memory objectsDave Airlie
This is an initial patch to do support for objects which needs physical contiguous main ram, cursors and overlay registers on older chipsets. These objects are bound on cursor bin, like pinning, and we copy the data to/from the backing store object into the real one on attach/detach. notes: possible over the top in attach/detach operations. no overlay support yet. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-01-16drm/i915: make LVDS fixed mode a preferred modeJesse Barnes
The detected fixed panel mode really is preferred, so mark it as such and add it to the LVDS connector mode list. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-01-16drm: handle depth & bpp changes correctlyJesse Barnes
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-01-16drm: initial KMS config fixesJesse Barnes
When mode setting is first initialized, the driver will call into drm_helper_initial_config() to set up an initial output and framebuffer configuration. This routine is responsible for probing the available connectors, encoders, and crtcs, looking for modes and putting together something reasonable (where reasonable is defined as "allows kernel messages to be visible on as many displays as possible"). However, the code was a bit too aggressive in setting default modes when none were found on a given connector. Even if some connectors had modes, any connectors found lacking modes would have the default 800x600 mode added to their mode list, which in some cases could cause problems later down the line. In my case, the LVDS was perfectly available, but the initial config code added 800x600 modes to both of the detected but unavailable HDMI connectors (which are on my non-existent docking station). This ended up preventing later code from setting a mode on my LVDS, which is bad. This patch fixes that behavior by making the initial config code walk through the connectors first, counting the available modes, before it decides to add any default modes to a possibly connected output. It also fixes the logic in drm_target_preferred() that was causing zeroed out modes to be set as the preferred mode for a given connector, even if no modes were available. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-01-12drm/i915: setup sarea properly in master_privDave Airlie
If we are running DRI1 userspace, we really need to set the sarea up properly. thanks to Richard for finding/testing this. Signed-off-by: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-01-11drm/i915: set vblank enabled flag correctly across IRQ install/uninstallJesse Barnes
In the absence of kernel mode setting, many drivers disable IRQs across VT switch. The core DRM vblank code is missing a check for this case however; even after IRQ disable, the vblank code will still have the vblank_enabled flag set, so unless we track the fact that they're disabled at IRQ uninstall time, when we VT switch back in we won't actually re-enable them, which means any apps waiting on vblank before the switch will hang. This patch does that and also adds a sanity check to the wait condition to look for the irq_enabled flag in general, as well as adding a wakeup to the IRQ uninstall path. Fixes fdo bug #18879 with compiz hangs at VT switch. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-01-11drm/i915: don't enable vblanks on disabled pipesJesse Barnes
In some cases userland may be confused and try to wait on vblank events from pipes that aren't actually enabled. We shouldn't allow this, so return -EINVAL if the pipe isn't on. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-01-07trivial: replace last usages of __FUNCTION__ in kernelHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07drm: fix ordering of driver unload vs agp unload.Dave Airlie
For KMS drivers, we really need to cleanup the driver before disabling the AGP subsystem. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-01-07drm/i915: Respect the other stolen memory sizes we know of.Eric Anholt
fd.o bug #19336. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-01-07drm/i915: Non-mobile parts don't have integrated TV-out.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-01-07drm/i915: Add support for integrated HDMI on G4X hardware.Eric Anholt
This is ported directly from the userland 2D driver code. The HDMI audio bits aren't hooked up yet. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-01-07drm/i915: Pin cursor bo and unpin old bo when setting cursor.Kristian Høgsberg
We also didn't track the cursor bo before and would leak a reference when the cursor image was change. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-01-07drm/i915: Don't allow objects to get bound while VT switched.Eric Anholt
This avoids a BUG_ON in the enter_vt path due to objects being in the GTT when we shouldn't have ever let them be (as we're not supposed to touch the device during that time). This was triggered by a change in the 2D driver to use the GTT mapping of objects after pinning them to improve software fallback performance. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-01-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (60 commits) uio: make uio_info's name and version const UIO: Documentation for UIO ioport info handling UIO: Pass information about ioports to userspace (V2) UIO: uio_pdrv_genirq: allow custom irq_flags UIO: use pci_ioremap_bar() in drivers/uio arm: struct device - replace bus_id with dev_name(), dev_set_name() libata: struct device - replace bus_id with dev_name(), dev_set_name() avr: struct device - replace bus_id with dev_name(), dev_set_name() block: struct device - replace bus_id with dev_name(), dev_set_name() chris: struct device - replace bus_id with dev_name(), dev_set_name() dmi: struct device - replace bus_id with dev_name(), dev_set_name() gadget: struct device - replace bus_id with dev_name(), dev_set_name() gpio: struct device - replace bus_id with dev_name(), dev_set_name() gpu: struct device - replace bus_id with dev_name(), dev_set_name() hwmon: struct device - replace bus_id with dev_name(), dev_set_name() i2o: struct device - replace bus_id with dev_name(), dev_set_name() IA64: struct device - replace bus_id with dev_name(), dev_set_name() i7300_idle: struct device - replace bus_id with dev_name(), dev_set_name() infiniband: struct device - replace bus_id with dev_name(), dev_set_name() ISDN: struct device - replace bus_id with dev_name(), dev_set_name() ...
2009-01-06Check fops_get() return valueLaurent Pinchart
Several subsystem open handlers dereference the fops_get() return value without checking it for nullness. This opens a race condition between the open handler and module unloading. A module can be marked as being unloaded (MODULE_STATE_GOING) before its exit function is called and gets the chance to unregister the driver. During that window open handlers can still be called, and fops_get() will fail in try_module_get() and return a NULL pointer. This change checks the fops_get() return value and returns -ENODEV if NULL. Reported-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Acked-by: Takashi Iwai <tiwai@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dave Airlie <airlied@linux.ie> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06gpu: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
CC: Dave Airlie <airlied@redhat.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-29drm/i915: fix modeset devname allocation + agp init return check.Dave Airlie
devname needs to be allocated before the irq is installed, so the irq routines get the correct name in /proc. Also check the return value from the AGP init function, and fixup the exit points. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29drm/i915: Remove redundant test in error path.Julia Lawall
The error path for object list being null is in the second goto target. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-12-29drm: Add a debug node for vblank state.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-12-29drm: Avoid use-before-null-test on dev in drm_cleanup().Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-12-29drm/i915: Don't print to dmesg when taking signal during object_pin.Eric Anholt
This showed up in logs where people had a hung chip, so pinning was blocked on the chip unpinning other buffers, and the X Server took its scheduler signal during that time. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-12-29drm: pin new and unpin old buffer when setting a mode.Kristian Høgsberg
This removes the requirement for user space to pin a buffer before setting a mode that is backed by the pixels from that buffer. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-12-29drm/i915: un-EXPORT and make 'intelfb_panic' staticHannes Eder
Fix this sparse warning: drivers/gpu/drm/i915/intel_fb.c:417:5: warning: symbol 'intelfb_panic' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-12-29drm/i915: Delete unused, pointless i915_driver_firstopen.Eric Anholt
Thanks to Hannes Eder for pointing out that this code was dead according to sparse. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-12-29drm/i915: fix sparse warnings: returning void-valued expressionHannes Eder
Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-12-29drm/i915: fix sparse warnings: move 'extern' decls to header fileHannes Eder
Move 'extern'-decls from "intel_dvo.c" to "dvo.h", as "dvo.h" is included by and only by files where the symbols are either defined or used. Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-12-29drm/i915: fix sparse warnings: make symbols staticHannes Eder
Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-12-29drm/i915: fix sparse warnings: declare one-bit bitfield as unsignedHannes Eder
Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-12-29drm/i915: Don't double-unpin buffers if we take a signal in evict_everything().Eric Anholt
We haven't seen this in practice, but it was visible when looking at a bug report from when i915_gem_evict_everything() was broken and would always return error. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-12-29drm/i915: Fix fbcon setup to align display pitch to 64b.Eric Anholt
This is required by the display plane, and fixes 1400x1050 laptop displays. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29drm: drop DRM_IOCTL_MODE_REPLACEFB, add+remove works just as well.Kristian H�gsberg
The replace fb ioctl replaces the backing buffer object for a modesetting framebuffer object. This can be acheived by just creating a new framebuffer backed by the new buffer object, setting that for the crtcs in question and then removing the old framebuffer object. Signed-off-by: Kristian Hogsberg <krh@redhat.com> Acked-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29drm: sanitise drm modesetting API + remove unused hotplugJakob Bornecrantz
The initially merged modesetting API has some uglies in it, this cleans up the struct members and ioctl ordering for initial submission. It also removes the unneeded hotplug infrastructure. airlied:- I've pulled this patch in from git modesetting-gem tree. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29drm: fix allowing master ioctls on non-master fds.Dave Airlie
The multi-master patches changed master to a pointer, and this fell out, change to use is_master. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29drm/radeon: use locked rmmap to remove sarea mapping.Dave Airlie
this exports the locked version of the symbol as struct_mutex locks it all. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29drm/radeon: fix missing hunk from the master changes.Dave Airlie
Thanks to Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> for reporting this. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29drm: fix useless gcc unused variable warningDave Airlie
the calling function doesn't call this function unless one of the two states that sets the value is true. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29drm/radeon: fix warning due to PAGE_SIZE maxDave Airlie
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29drm: kconfig have drm core select i2c for kmsDave Airlie
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29drm: PAGE_CACHE_WC is x86 only so farDave Airlie
The page protections need to be checked whether they need to be more flexible. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29drm: pick an 800x600@60HZ mode by default for unknown CRT.Dave Airlie
This is what X picks now, so we should do the same. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29drm/i915: Fix stolen memory detection on G45 and GM45.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29drm/i915: Register module dependencies for the modesetting code.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29DRM: i915: add mode setting supportJesse Barnes
This commit adds i915 driver support for the DRM mode setting APIs. Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are supported. HDMI, DisplayPort and additional SDVO output support will follow. Support for the mode setting code is controlled by the new 'modeset' module option. A new config option, CONFIG_DRM_I915_KMS controls the default behavior, and whether a PCI ID list is built into the module for use by user level module utilities. Note that if mode setting is enabled, user level drivers that access display registers directly or that don't use the kernel graphics memory manager will likely corrupt kernel graphics memory, disrupt output configuration (possibly leading to hangs and/or blank displays), and prevent panic/oops messages from appearing. So use caution when enabling this code; be sure your user level code supports the new interfaces. A new SysRq key, 'g', provides emergency support for switching back to the kernel's framebuffer console; which is useful for testing. Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29DRM: add mode setting supportDave Airlie
Add mode setting support to the DRM layer. This is a fairly big chunk of work that allows DRM drivers to provide full output control and configuration capabilities to userspace. It was motivated by several factors: - the fb layer's APIs aren't suited for anything but simple configurations - coordination between the fb layer, DRM layer, and various userspace drivers is poor to non-existent (radeonfb excepted) - user level mode setting drivers makes displaying panic & oops messages more difficult - suspend/resume of graphics state is possible in many more configurations with kernel level support This commit just adds the core DRM part of the mode setting APIs. Driver specific commits using these new structure and APIs will follow. Co-authors: Jesse Barnes <jbarnes@virtuousgeek.org>, Jakob Bornecrantz <jakob@tungstengraphics.com> Contributors: Alan Hourihane <alanh@tungstengraphics.com>, Maarten Maathuis <madman2003@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29drm/i915: add GEM GTT mapping supportJesse Barnes
Use the new core GEM object mapping code to allow GTT mapping of GEM objects on i915. The fault handler will make sure a fence register is allocated too, if the object in question is tiled. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29drm: GEM mmap supportJesse Barnes
Add core support for mapping of GEM objects. Drivers should provide a vm_operations_struct if they want to support page faulting of objects. The code for handling GEM object offsets was taken from TTM, which was written by Thomas Hellström. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29drm/i915: Add /proc debugging entry for reading out the HWS.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29drm: reorganise start and load.Dave Airlie
Make sure we have the primary node so the device can add maps. Signed-off-by: Dave Airlie <airlied@redhat.com>