summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm
AgeCommit message (Collapse)Author
2011-02-14drm/radeon/kms: atombios big endian fixesCédric Cano
agd5f: additional cleanups/fixes Signed-off-by: Cédric Cano <ccano@interfaceconcept.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14drm/radeon: 6xx/7xx non-kms endian fixesCédric Cano
agd5f: minor cleanups Signed-off-by: Cédric Cano <ccano@interfaceconcept.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14drm/radeon/kms: optimize CS state checking for r100->r500Marek Olšák
The colorbuffer, zbuffer, and texture states are checked only once when they get changed. This improves performance in the apps which emit lots of draw packets and few state changes. This drops performance in glxgears by a 1% or so, but glxgears is not a benchmark we care about. The time spent in the kernel when running Torcs dropped from 33% to 23% and the frame rate is higher, which is a good thing. r600 might need something like this as well. Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14drm: do not leak kernel addresses via /proc/dri/*/vmaKees Cook
In the continuing effort to avoid kernel addresses leaking to unprivileged users, this patch switches to %pK for /proc/dri/*/vma. Signed-off-by: Kees Cook <kees.cook@canonical.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14drm/radeon/kms: add connector table for mac g5 9600Alex Deucher
PPC Mac cards do not provide connector tables in their vbios. Their connector/encoder configurations must be hardcoded in the driver. verified by nyef on #radeon Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14radeon mkregtable: Add missing fclose() callsJesper Juhl
drivers/gpu/drm/radeon/mkregtable.c:parser_auth() almost always remembers to fclose(file) before returning, but it misses two spots. This is not really important since the process will exit shortly after and thus close the file for us, but being explicit prevents static analysis tools from complaining about leaked memory and missing fclose() calls and it also seems to be the prefered style of the existing code to explicitly close the file. So, here's a patch to add the two missing fclose() calls. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14drm/radeon/kms: fix interlaced modes on dce4+Alex Deucher
- set scaler table clears the interleave bit, need to reset it in encoder quirks, this was already done for pre-dce4. - remove the interleave settings from set_base() functions this is now handled in the encoder quirks functions, and isn't technically part of the display base setup. - rename evergreen_do_set_base() to dce4_do_set_base() since it's used on both evergreen and NI asics. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=28182 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14drm/radeon: fix memory debugging since d961db75ce86a84f1f04e91ad1014653ed7d9f46Dave Airlie
The old code dereferenced a value, the new code just needs to pass the ptr. fixes an oops looking at files in debugfs. cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-11drm/i915: disable PCH ports if needed when disabling a CRTCJesse Barnes
Disable any PCH ports associated with a pipe when disabling it. This should prevent transcoder disable failures due to ports still being on. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [ickle: introduce *_PIPE_ENABLED() macro] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-11drm/i915: i915_mutex_interruptible() returns -EINTRChris Wilson
... so we handle that for i915_gem_fault() in the same manner as ERESTARTSYS, or we send a SIGBUS to the faulting application. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-11drm/i915: Fix resume regression from 5d1d0ccChris Wilson
The irony of the patch to fix the resume regression on PineView causing a further regression on Ironlake is not lost on me. Reported-by: Jeff Chua <jeff.chua.linux@gmail.com> Reported-by: Björn Schließmann <chronoss@gmx.de> Tested-by: Björn Schließmann <chronoss@gmx.de> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=28802 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-11drm/i915/tv: Use polling rather than interrupt-based hotplugChris Wilson
The documentation recommends that we should use a polling method for TV detection as this is more power efficient than the interrupt based mechanism (as the encoder can be completely switched off). A secondary effect is that leaving the hotplug enabled seems to be causing pipe underruns as reported by Hugh Dickins on his Crestline. Tested-by: Hugh Dickins <hughd@google.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [This is a candidate for stable, but needs minor porting to 2.6.37]
2011-02-11drm/i915: Trigger modesetting if force-audio changesChris Wilson
If the user changes the force-audio property and it no longer reflects the current configuration, then we need to trigger a mode set in order to update the registers. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-09drm/i915/sdvo: If we have an EDID confirm it matches the mode of the connectionChris Wilson
If we have an EDID for a digital panel, but we are probing a non-TMDS connector then we know that this is a false detection, and vice versa. This should reduce the number of bogus outputs on multi-function adapters that report the same output on multiple connectors. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=34101 Reported-by: Sebastien Caty <sebastien.caty@mrnf.gouv.qc.ca> Tested-by: Sebastien Caty <sebastien.caty@mrnf.gouv.qc.ca> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2011-02-09drm/i915: Disable RC6 on IronlakeChris Wilson
The automatic powersaving feature is once again causing havoc, with 100% reliable hangs on boot and resume on affected machines. Reported-by: Francesco Allertsen <fallertsen@gmail.com> Reported-by: Gui Rui <chaos.proton@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=28582 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-07drm/i915: cleanup per-pipe reg usageJesse Barnes
We had some conversions over to the _PIPE macros, but didn't get everything. So hide the per-pipe regs with an _ (still used in a few places for legacy) and add a few _PIPE based macros, then make sure everyone uses them. [update: remove usage of non-existent no-op macro] [update 2: keep modesetting suspend/resume code, update to new reg names] Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> [ickle: stylistic cleanups for checkpatch and taste] Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-07drm/i915: Skip the no-op domain changes when already in CPU|GTT domainsChris Wilson
Removes some superfluous fluff from tracing... Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-07drm/i915: Refine tracepointsChris Wilson
A lot of minor tweaks to fix the tracepoints, improve the outputting for ftrace, and to generally make the tracepoints useful again. It is a start and enough to begin identifying performance issues and gaps in our coverage. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-07drm/i915: Fix infinite loop regression from 21dd3734Chris Wilson
By returning EAGAIN upon a wedged GPU before attempting to wait, we would hit an infinite loop of repeating operation without ever progressing. Instead this needs to be EIO so that userspace knows that the GPU is truly wedged and not in the process of error recovery. Similarly, we need to handle the error recovery during i915_gem_fault. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-07drm/i915: the PCH reference clocks are global, so don't clobber unconditionallyJesse Barnes
The PCH can drive several reference clocks simultaneously, and needs to with multiple display configurations. So we can't just clobber the existing state everytime we set a mode, we need to take into account what the other CRTCs are doing at the time. Doing so fixes an issue where you'd lose the LVDS display at boot if you had an LVDS+DP config. [updated: init bools and check CRTC status correctly] Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-07drm/i915: add port assertion check when disabling transcodersJesse Barnes
When a transcoder is disabled, any ports pointing at it should also be disabled. If they're not, we may fail to disable the transcoder, leading to blank displays. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-07drm/i915: don't check plane vs pipe enable on ILK+Jesse Barnes
These bits have a different meaning on ILK+, where planes are hardwired to pipes. Fixing this avoid some spurious assertion failures. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-07drm/i915: Set the transcoder port to none when disabling DP.Eric Anholt
The specs say to do so. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-07drm/i915: Use DEBUG_KMS for the self-refresh watermarksChris Wilson
For consistency and segregation from the noisy DRM_DEBUG(). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-07drm/i915: Include 'i915_error_state' hint for when the GPU catches fireChris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-07drm: add usb frameworkDave Airlie
This adds an initial framework to plug USB graphics devices into the drm/kms subsystem. I've started writing a displaylink driver using this interface. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-07drm: rework PCI/platform driver interface.Dave Airlie
This abstracts the pci/platform interface out a step further, we can go further but this is far enough for now to allow USB to be plugged in. The drivers now just call the init code directly for their device type. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-07drm: dumb scanout create/mmap for intel/radeon (v3)Dave Airlie
This is just an idea that might or might not be a good idea, it basically adds two ioctls to create a dumb and map a dumb buffer suitable for scanout. The handle can be passed to the KMS ioctls to create a framebuffer. It looks to me like it would be useful in the following cases: a) in development drivers - we can always provide a shadowfb fallback. b) libkms users - we can clean up libkms a lot and avoid linking to libdrm_*. c) plymouth via libkms is a lot easier. Userspace bits would be just calls + mmaps. We could probably mark these handles somehow as not being suitable for acceleartion so as top stop people who are dumber than dumb. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-07drm/i810: remove the BKLArnd Bergmann
SMP i810 systems were practically nonexistent and the configuration was not officially supported by Intel at the time when Pentium-III was common. With this change, it is still possible to build a distribution kernel that has support for SMP and includes the i810 driver without the BKL. As a precaution, check for the theoretical SMP case at run time and refuse to load the driver. We also need to disable CONFIG_PREEMPT builds for this driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-07drm: remove i830 driverArnd Bergmann
This driver is one of the last users of the big kernel lock, which is going away. All the hardware supported by this driver also works with the newer i915 driver, and recent X.org releases only work with that driver anyway. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-06drm/i915/lvds: Restore dithering on native modes for gen2/3Chris Wilson
A regression introduced in bee17e5 cleared the dithering bit for native modes on gen2/3. Bugzilla: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/711568 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-04Merge branch 'drm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (27 commits) gpu/stub: fix acpi_video build error, fix stub kconfig dependencies drm/radeon/kms: dynamically allocate power state space drm/radeon/kms: fix s/r issues with bios scratch regs agp: ensure GART has an address before enabling it Revert "agp: AMD AGP is used on UP1100 & UP1500 alpha boxen" amd-k7-agp: remove non-x86 code drm/radeon/kms/evergreen: always set certain VGT regs at CP init drm/radeon/kms: add updated ib_execute function for evergreen drm/radeon: remove 0x4243 pci id drm/radeon/kms: Enable new pll calculation for avivo+ asics drm/radeon/kms: add new pll algo for avivo asics drm/radeon/kms: add pll debugging output drm/radeon/kms: switch back to min->max pll post divider iteration drm/radeon/kms: rv6xx+ thermal sensor fixes drm/nv50: fix display on 0x50 drm/nouveau: correctly pair hwmon_init and hwmon_fini drm/i915: Only bind to function 0 of the PCI device drm/i915: Suppress spurious vblank interrupts drm: Avoid leak of adjusted mode along quick set_mode paths drm: Simplify and defend later checks when disabling a crtc ...
2011-02-04drm: Only set DPMS ON when actually configuring a modeKeith Packard
In drm_crtc_helper_set_config, instead of always forcing all outputs to DRM_MODE_DPMS_ON, only set them if the CRTC is actually getting a mode set, as any mode set will turn all outputs on. This fixes https://lkml.org/lkml/2011/1/24/457 Signed-off-by: Keith Packard <keithp@keithp.com> Cc: stable@kernel.org (2.6.37) Reported-and-tested-by: Carlos R. Mafra <crmafra2@gmail.com> Tested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-04drm/radeon/kms: dynamically allocate power state spaceAlex Deucher
We previously used a static array, but some new systems had more states then we had array space, so dynamically allocate space based on the number of states in the vbios. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=33851 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-04drm/radeon/kms: fix s/r issues with bios scratch regsAlex Deucher
The accelerate mode bit gets checked by certain atom command tables to set up some register state. It needs to be clear when setting modes and set when not. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=26942 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-04drm/radeon/kms/evergreen: always set certain VGT regs at CP initAlex Deucher
These should be handled by the clear_state setup, but set them directly as well just to be sure. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-04drm/radeon/kms: add updated ib_execute function for evergreenAlex Deucher
Adds new packet to disable DX9 constant emulation. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-02drm/i915: Invalidate TLB caches on SNB BLT/BSD ringsChris Wilson
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2011-02-02drm/radeon/kms: Enable new pll calculation for avivo+ asicsAlex Deucher
New algo is used for r5xx+ and legacy is used for r1xx-r4xx, rv515. I've tested on all relevant GPUs and monitors that I have access to and have found no problems. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=26562 https://bugzilla.kernel.org/show_bug.cgi?id=26552 May fix: https://bugs.freedesktop.org/show_bug.cgi?id=32556 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-02drm/radeon/kms: add new pll algo for avivo asicsAlex Deucher
Based on the vbios code. This should hopefully fix the pll problems on a number of avivo asics once it's enabled. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-02drm/radeon/kms: add pll debugging outputAlex Deucher
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-02drm/radeon/kms: switch back to min->max pll post divider iterationAlex Deucher
Seems more reliable. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=26552 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-02drm/radeon/kms: rv6xx+ thermal sensor fixesAlex Deucher
Some fixes to the thermal sensor code: - handle negative numbers - properly handle temp calculation on different asics Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-02Merge remote branch 'nouveau/drm-nouveau-next' of /ssd/git/drm-nouveau-next ↵Dave Airlie
into drm-fixes * 'nouveau/drm-nouveau-next' of /ssd/git/drm-nouveau-next: drm/nv50: fix display on 0x50 drm/nouveau: correctly pair hwmon_init and hwmon_fini
2011-02-02Merge remote branch 'intel/drm-intel-fixes' of /ssd/git/drm-next into drm-fixesDave Airlie
* 'intel/drm-intel-fixes' of /ssd/git/drm-next: drm/i915: Only bind to function 0 of the PCI device drm/i915: Suppress spurious vblank interrupts drm: Avoid leak of adjusted mode along quick set_mode paths drm: Simplify and defend later checks when disabling a crtc drm: Don't switch fb when disabling an output drm/i915: Reset crtc after resume drm/i915/crt: Force the initial probe after reset drm/i915: Reset state after a GPU reset or resume drm: Add an interface to reset the device drm/i915/sdvo: If at first we don't succeed in reading the response, wait
2011-02-02drm/nv50: fix display on 0x50Ben Skeggs
Accidently busted a while back. We'll be creating objects that aren't necessary here, but, they're never used so no harm.. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-02-02drm/nouveau: correctly pair hwmon_init and hwmon_finiLucas Stach
I broke this with my commit 07cfe0e7a820ecad078c04e9c2a102521709145d This fixes fdo #33434 Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-02-01drm/i915: Only bind to function 0 of the PCI deviceChris Wilson
Early chipsets (gen2/3) used function 1 as a placeholder for multi-head. We used to ignore these since they were not assigned to PCI_CLASS_DISPLAY_VGA. However with 934f992c7 we attempt to bind to all Intel PCI_CLASS_DISPLAY devices (and functions) to work in multi-gpu systems. This fails hard on gen2/3. Reported-by: Ferenc Wágner <wferi@niif.hu> Tested-by: Ferenc Wágner <wferi@niif.hu> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=28012 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org
2011-02-01drm/i915: Enable GMBUS for post-gen2 chipsetsChris Wilson
With the recent SDVO fix, this is working on all the machines I have to hand - except for an 845G. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-02-01Merge branch 'drm-intel-fixes' into drm-intel-nextChris Wilson
Merge resume fixes from -fixes and an important fix for SDVO GMBUS.
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-06-27 07:24:15 +0000