summaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2014-05-31drm/radeon: Resume fbcon lastDaniel Vetter
So a few people complained that commit 177cf92de4aa97ec1435987e91696ed8b5023130 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Apr 1 22:14:59 2014 +0200 drm/crtc-helpers: fix dpms on logic which was merged into 3.15-rc1, broke resume on radeons. Strangely git bisect lead everyone to commit 25f397a429dfa43f22c278d0119a60a343aa568f Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Jul 19 18:57:11 2013 +0200 drm/crtc-helper: explicit DPMS on after modeset which was merged long ago and actually part of 3.14. Digging deeper I've noticed (again) that the call to drm_helper_resume_force_mode in the radeon resume handlers was a no-op previously because everything gets shut down on suspend. radeon does this with explicit calls to drm_helper_connector_dpms with DPMS_OFF. But with 177c we now force the dpms state to ON, so suddenly resume_force_mode actually forced the crtcs back on. This is the intention of the change after all, the problem is that radeon resumes the fbdev console layer _before_ restoring the display, through calling fb_set_suspend. And fbcon does an immediate ->set_par, which in turn causes the same forced mode restore to happen. Two concurrent modeset operations didn't lead to happiness. Fix this by delaying the fbcon resume until the end of the readeon resum functions. v2: Fix up a bit of the spelling fail. References: https://lkml.org/lkml/2014/5/29/1043 References: https://lkml.org/lkml/2014/5/2/388 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=74751 Tested-by: Ken Moffat <zarniwhoop@ntlworld.com> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Ken Moffat <zarniwhoop@ntlworld.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@gmail.com>
2014-05-30drm/radeon: only allocate necessary size for vm bo listChristian König
No need to always allocate the theoretical maximum here. Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-30drm/radeon: don't allow RADEON_GEM_DOMAIN_CPU for command submissionMarek Olšák
It hangs the hardware. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org
2014-05-30drm/radeon: avoid crash if VM command submission isn't availableChristian König
Signed-off-by: Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org
2014-05-30drm/radeon: lower the ref * post PLL maximum once moreChristian König
Let's be conservative and use 100 here until we find something better. Bugs: https://bugzilla.kernel.org/show_bug.cgi?id=75241 Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-27drm/i915: Prevent negative relocation deltas from wrappingChris Wilson
This is pure evil. Userspace, I'm looking at you SNA, repacks batch buffers on the fly after generation as they are being passed to the kernel for execution. These batches also contain self-referenced relocations as a single buffer encompasses the state commands, kernels, vertices and sampler. During generation the buffers are placed at known offsets within the full batch, and then the relocation deltas (as passed to the kernel) are tweaked as the batch is repacked into a smaller buffer. This means that userspace is passing negative relocations deltas, which subsequently wrap to large values if the batch is at a low address. The GPU hangs when it then tries to use the large value as a base for its address offsets, rather than wrapping back to the real value (as one would hope). As the GPU uses positive offsets from the base, we can treat the relocation address as the minimum address read by the GPU. For the upper bound, we trust that userspace will not read beyond the end of the buffer. So, how do we fix negative relocations from wrapping? We can either check that every relocation looks valid when we write it, and then position each object such that we prevent the offset wraparound, or we just special-case the self-referential behaviour of SNA and force all batches to be above 256k. Daniel prefers the latter approach. This fixes a GPU hang when it tries to use an address (relocation + offset) greater than the GTT size. The issue would occur quite easily with full-ppgtt as each fd gets its own VM space, so low offsets would often be handed out. However, with the rearrangement of the low GTT due to capturing the BIOS framebuffer, it is already affecting kernels 3.15 onwards. I think only IVB+ is susceptible to this bug, but the workaround should only kick in rarely, so it seems sensible to always apply it. v3: Use a bias for batch buffers to prevent small negative delta relocations from wrapping. v4 from Daniel: - s/BIAS/BATCH_OFFSET_BIAS/ - Extract eb_vma_misplaced/i915_vma_misplaced since the conditions were growing rather cumbersome. - Add a comment to eb_get_batch explaining why we do this. - Apply the batch offset bias everywhere but mention that we've only observed it on gen7 gpus. - Drop PIN_OFFSET_FIX for now, that slipped in from a feature patch. v5: Add static to eb_get_batch, spotted by 0-day tester. Testcase: igt/gem_bad_reloc Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78533 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v3) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-27drm/i915: Only copy back the modified fields to userspace from execbufferChris Wilson
We only want to modifiy a single field in the userspace view of the execbuffer command buffer, so explicitly change that rather than copy everything back again. This serves two purposes: 1. The single fields are much cheaper to copy (constant size so the copy uses special case code) and much smaller than the whole array. 2. We modify the array for internal use that need to be masked from the user. Note: We need this backported since without it the next bugfix will blow up when userspace recycles batchbuffers and relocations. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-27drm/i915: Fix dynamic allocation of physical handlesChris Wilson
A single object may be referenced by multiple registers fundamentally breaking the static allotment of ids in the current design. When the object is used the second time, the physical address of the first assignment is relinquished and a second one granted. However, the hardware is still reading (and possibly writing) to the old physical address now returned to the system. Eventually hilarity will ensue, but in the short term, it just means that cursors are broken when using more than one pipe. v2: Fix up leak of pci handle when handling an error during attachment, and avoid a double kmap/kunmap. (Ville) Rebase against -fixes. v3: And fix the error handling added in v2 (Ville) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77351 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-22Merge branch 'drm-fixes-3.15' of ↵Dave Airlie
git://people.freedesktop.org/~deathsimple/linux into drm-fixes radeon fixes, VCE one is big but does fix a userspace crash. * 'drm-fixes-3.15' of git://people.freedesktop.org/~deathsimple/linux: drm/radeon/pm: don't allow debugfs/sysfs access when PX card is off (v2) drm/radeon: avoid segfault on device open when accel is not working. drm/radeon: fix typo in finding PLL params drm/radeon: fix register typo on si drm/radeon: fix buffer placement under memory pressure v2 drm/radeon: fix page directory update size estimation drm/radeon: handle non-VGA class pci devices with ATRM drm/radeon: fix DCE83 check for mullins drm/radeon: check VCE relocation buffer range v3 drm/radeon: also try GART for CPU accessed buffers
2014-05-22Merge branch 'drm-nouveau-next' of ↵Dave Airlie
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes fixes nasty panel bleeding bug. * 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/gf119-/disp: fix nasty bug which can clobber SOR0's clock setup drm/nvd9/therm: handle another kind of PWM fan
2014-05-20drm/radeon/pm: don't allow debugfs/sysfs access when PX card is off (v2)Alex Deucher
When the PX card is off don't try and access it. Avoid hw access to the card while it's off (e.g., reading back invalid temperature). v2: be less strict bug: https://bugzilla.kernel.org/show_bug.cgi?id=76321 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-20drm/radeon: avoid segfault on device open when accel is not working.Jérôme Glisse
When accel is not working on device with virtual address space radeon segfault because the ib buffer is NULL and trying to map it inside the virtual address space trigger segfault. This patch only map the ib buffer if accel is working. Cc: <stable@vger.kernel.org> Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-20drm/radeon: fix typo in finding PLL paramsChristian König
Otherwise the limit is raised to high. Signed-off-by: Christian König <christian.koenig@amd.com> Tested-by: Ken Moffat <zarniwhoop@ntlworld.com>
2014-05-20drm/radeon: fix register typo on siAlex Deucher
Probably a copy paste typo. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org
2014-05-20drm/radeon: fix buffer placement under memory pressure v2Christian König
Some buffers (UVD/VM page tables) must be placed in VRAM, but the byte restriction for moving buffers didn't took this into account. v2: keep closer to the original code Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Marek Olšák <marek.olsak@amd.com>
2014-05-20drm/radeon: fix page directory update size estimationChristian König
Take padding into account as well. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=75651 Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2014-05-20drm/radeon: handle non-VGA class pci devices with ATRMAlex Deucher
Newer PX systems have non-VGA pci class dGPUs. Update the ATRM fetch method to handle those cases. bug: https://bugzilla.kernel.org/show_bug.cgi?id=75401 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org
2014-05-20drm/radeon: fix DCE83 check for mullinsAlex Deucher
Mullins is DCE83 just like Kabini. Set the proper number of endpoints on mullins. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-20drm/radeon: check VCE relocation buffer range v3Leo Liu
v2 (chk): fix image size storage v3 (chk): fix UV size calculation Signed-off-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-20drm/radeon: also try GART for CPU accessed buffersChristian König
Placing them exclusively into VRAM might not work all the time. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=78297 Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-05-20drm/gf119-/disp: fix nasty bug which can clobber SOR0's clock setupBen Skeggs
Fixes a LVDS bleed issue on Lenovo W530 that can occur under a number of circumstances. Cc: <stable@vger.kernel.org > # v3.9+ Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-05-20drm/nvd9/therm: handle another kind of PWM fanMartin Peres
Signed-off-by: Martin Peres <martin.peres@free.fr> Tested-by: SaveTheRobots <john.rowley08@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-05-20Merge tag 'drm-intel-fixes-2014-05-16' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes Intel fixes for regressions, black screens and hangs, for 3.15. * tag 'drm-intel-fixes-2014-05-16' of git://anongit.freedesktop.org/drm-intel: drm/i915: Increase WM memory latency values on SNB drm/i915: restore backlight precision when converting from ACPI drm/i915: Use the first mode if there is no preferred mode in the EDID drm/i915/dp: force eDP lane count to max available lanes on BDW drm/i915/vlv: reset VLV media force wake request register drm/i915/SDVO: For sysfs link put directory and target in correct order drm/i915: use lane count and link rate from VBT as minimums for eDP drm/i915: clean up VBT eDP link param decoding drm/i915: consider the source max DP lane count too
2014-05-15drm/i915: Increase WM memory latency values on SNBVille Syrjälä
On SNB the BIOS provided WM memory latency values seem insufficient to handle high resolution displays. In this particular case the display mode was a 2560x1440@60Hz, which makes the pixel clock 241.5 MHz. It was empirically found that a memory latency value if 1.2 usec is enough to avoid underruns, whereas the BIOS provided value of 0.7 usec was clearly too low. Incidentally 1.2 usec is what the typical BIOS provided values are on IVB systems. Increase the WM memory latency values to at least 1.2 usec on SNB. Hopefully this won't have a significant effect on power consumption. v2: Increase the latency values regardless of the pixel clock Cc: Robert N <crshman@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70254 Tested-by: Robert Navarro <crshman@gmail.com> Tested-by: Vitaly Minko <vitaly.minko@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-05-15drm/i915: restore backlight precision when converting from ACPIAaron Lu
When we set backlight on behalf of ACPI opregion, we will convert the backlight value in the 0-255 range defined in opregion to the actual hardware level. Commit 22505b82a2 (drm/i915: avoid brightness overflow when doing scale) is meant to fix the overflow problem when doing the conversion, but it also caused a problem that the converted hardware level doesn't quite represent the intended value: say user wants maximum backlight level(255 in opregion's range), then we will calculate the actual hardware level to be: level = freq / max * level, where freq is the hardware's max backlight level(937 on an user's box), and max and level are all 255. The converted value should be 937 but the above calculation will yield 765. To fix this issue, just use 64 bits to do the calculation to keep the precision and avoid overflow at the same time. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=72491 Reported-by: Nico Schottelius <nico-bugzilla.kernel.org@schottelius.org> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-05-15drm/i915: Use the first mode if there is no preferred mode in the EDIDChris Wilson
This matches the algorithm used by earlier kernels when selecting the mode for the fbcon. And only if there is no modes at all, do we fall back to using the BIOS configuration. Seamless transition is still preserved (from the BIOS configuration to ours) so long as the BIOS has also chosen what we hope is the native configuration. Reported-by: Knut Petersen <Knut_Petersen@t-online.de> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78655 Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Knut Petersen <Knut_Petersen@t-online.de> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [Jani: applied Chris' "Please imagine that I wrote this correctly."] Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-05-15drm/i915/dp: force eDP lane count to max available lanes on BDWJani Nikula
There are certain BDW high res eDP machines that regressed due to commit 38aecea0ccbb909d635619cba22f1891e589b434 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Mar 3 11:18:10 2014 +0100 drm/i915: reverse dp link param selection, prefer fast over wide again The commit lead to 2 lanes at 5.4 Gbps being used instead of 4 lanes at 2.7 Gbps on the affected machines. Link training succeeded for both, but the screen remained blank with the former config. Further investigation showed that 4 lanes at 5.4 Gbps worked also. The root cause for the blank screen using 2 lanes remains unknown, but apparently the driver for a certain other operating system by default uses the max available lanes. Follow suit on Broadwell eDP, for at least until we figure out what is going on. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76711 Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Tested-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-05-09drm/i915/vlv: reset VLV media force wake request registerJani Nikula
Media force wake get hangs the machine when the system is booted without displays attached. The assumption is that (at least some versions of) the firmware has skipped some initialization in that case. Empirical evidence suggests we need to reset the media force wake request register in addition to the render one to avoid hangs. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75895 Reported-by: Imre Deak <imre.deak@intel.com> Reported-by: Darren Hart <dvhart@linux.intel.com> Tested-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-05-07drm/i915/SDVO: For sysfs link put directory and target in correct orderEgbert Eich
When linking the i2c sysfs file into the connector's directory pass directory and link target in the right order. This code was introduced with: commit 931c1c26983b4f84e33b78579fc8d57e4a14c6b4 Author: Imre Deak <imre.deak@intel.com> Date: Tue Feb 11 17:12:51 2014 +0200 drm/i915: sdvo: add i2c sysfs symlink to the connector's directory This is the same what we do for DP connectors, so make things more consistent. Signed-off-by: Egbert Eich <eich@suse.de> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-05-07drm/i915: use lane count and link rate from VBT as minimums for eDPJani Nikula
Most likely the minimums for both should be enough for enabling the native resolution on the eDP, and we'll end up using the predetermined optimal link config for the panel. v2: Add debug prints. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73539 Tested-by: Markus Blank-Burian <burian@muenster.de> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-05-07drm/i915: clean up VBT eDP link param decodingJani Nikula
Use defines, do not set anything if VBT has values unknown to us. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-05-07drm/i915: consider the source max DP lane count tooPaulo Zanoni
Even if the panel claims it can support 4 lanes, there's the possibility that the HW can't, so consider this while selecting the max lane count. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-05-07Merge branch 'mullins' of git://people.freedesktop.org/~deathsimple/linux ↵Dave Airlie
into drm-fixes Add Mullins chips support. * 'mullins' of git://people.freedesktop.org/~deathsimple/linux: drm/radeon: add pci ids for Mullins drm/radeon: add Mullins VCE support drm/radeon: modesetting updates for Mullins. drm/radeon: dpm updates for KV/KB drm/radeon: add Mullins dpm support. drm/radeon: add Mullins UVD support. drm/radeon: update cik init for Mullins. drm/radeon: add Mullins chip family
2014-05-07Merge branch 'drm-nouveau-next' of ↵Dave Airlie
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes nouveau fixes. * 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/gm107/gr: bump attrib cb size quite a bit drm/nouveau: fix another lock unbalance in nouveau_crtc_page_flip drm/nouveau/bios: fix shadowing from PROM on big-endian systems drm/nouveau/acpi: allow non-optimus setups to load vbios from acpi
2014-05-07Merge tag 'topc/core-stuff-2014-05-05' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes Some more i915 fixes. There's still some DP issues we are looking into, but wanted to get these moving. * tag 'topc/core-stuff-2014-05-05' of git://anongit.freedesktop.org/drm-intel: drm/i915: don't try DP_LINK_BW_5_4 on HSW ULX drm/i915: Sanitize the enable_ppgtt module option once drm/i915: Break encoder->crtc link separately in intel_sanitize_crtc()
2014-05-06drm/radeon: add Mullins VCE supportLeo Liu
VCE 2.0 just like the other CIK parts. Signed-off-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-06drm/radeon: modesetting updates for Mullins.Samuel Li
Uses the same code as Kabini. Signed-off-by: Samuel Li <samuel.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-06drm/radeon: dpm updates for KV/KBAlex Deucher
- Use vddc/sclk dep table for voltage if available - Fix UVD DPM setup - Patch voltage tables properly for non-UVD blocks - Fix DPM + UVD/VCE on Mullins Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-06drm/radeon: add Mullins dpm support.Samuel Li
Generic dpm support similar to Kabini. Mullins specific features will be worked on later. Signed-off-by: Samuel Li <samuel.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-06drm/radeon: add Mullins UVD support.Samuel Li
Has same version of UVD as other CIK parts. Signed-off-by: Samuel Li <samuel.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-06drm/radeon: update cik init for Mullins.Samuel Li
Also add golden registers, update firmware loading functions. Signed-off-by: Samuel Li <samuel.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-06drm/radeon: add Mullins chip familySamuel Li
Mullins is a new CI-based APU. Signed-off-by: Samuel Li <samuel.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-06drm/radeon: lower the ref * post PLL maximumChristian König
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=75241 Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-06drm/radeon: check that we have a clock before PLL setupChristian König
Partially fixes: https://bugzilla.kernel.org/show_bug.cgi?id=75211 Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-06drm/radeon: drm/radeon: add missing radeon_semaphore_free to error pathMaarten Lankhorst
It would appear this bug has been copy/pasted many times without being noticed. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2014-05-06drm/radeon: Fix num_banks calculation for SIMichel Dänzer
The way the tile mode array index was calculated only makes sense for the CIK specific macrotile mode array. For SI, we need to use one of the tile mode array indices reserved for displayable surfaces. This happened to result in correct display most if not all of the time because most of the SI tiling modes use the same number of banks. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-02drm/gm107/gr: bump attrib cb size quite a bitBen Skeggs
When initially looking at traces, missed the fact the binary driver was using large pages. Fixes page faults when launching geometry shaders. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-05-02drm/nouveau: fix another lock unbalance in nouveau_crtc_page_flipMaarten Lankhorst
Fixes a regression introduced by 060810d7abaabca "drm/nouveau: fix locking issues in page flipping paths". chan->cli->mutex is unlocked a second time in the fail_unreserve path, fix this by moving mutex_unlock down. Cc: stable@vger.kernel.org # v3.11+ Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-05-02drm/nouveau/bios: fix shadowing from PROM on big-endian systemsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2014-05-02drm/nouveau/acpi: allow non-optimus setups to load vbios from acpiIlia Mirkin
There appear to be a crop of new hardware where the vbios is not available from PROM/PRAMIN, but there is a valid _ROM method in ACPI. The data read from PCIROM almost invariably contains invalid instructions (still has the x86 opcodes), which makes this a low-risk way to try to obtain a valid vbios image. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76475 Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Cc: <stable@vger.kernel.org> # v2.6.35+ Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-21 23:01:52 +0000