summaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2014-12-05drm: add helper to get crtc timings (v5)Gustavo Padovan
We need to get hdisplay and vdisplay in a few places so create a helper to make our job easier. Note that drm_crtc_check_viewport() and intel_modeset_pipe_config() were previously making adjustments for doublescan modes and vscan > 1 modes, which was incorrect. Using our new helper fixes this mistake. v2 (by Matt): Use new stereo doubling function (suggested by Ville) v3 (by Matt): - Add missing kerneldoc (Daniel) - Use drm_mode_copy() (Jani) v4 (by Matt): - Drop stereo doubling function again; add 'stereo only' flag to drm_mode_set_crtcinfo() instead (Ville) v5 (by Matt): - Note behavioral change in drm_crtc_check_viewport() and intel_modeset_pipe_config(). (Ander) - Describe new adjustment flags in drm_mode_set_crtcinfo()'s kerneldoc. (Ander) Cc: dri-devel@lists.freedesktop.org Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Reviewed-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-05amdkfd: Disable support for 32-bit user processesOded Gabbay
This patch checks if the process that opens the /dev/kfd device is 32-bit process. If so, it returns -EPERM and prints a warning message in dmesg. This is done to prevent 32-bit user processes from using amdkfd, and hence, HSA features. AMD's HSA userspace stack will also support only 64-bit processes on Linux. Reviewed-by: Alexey Skidanov <alexey.skidanov@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
2014-12-05drm/i915: Update DRIVER_DATE to 20141205Daniel Vetter
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-05drm/i915/bdw: Add WaHdcDisableFetchWhenMaskedMichel Thierry
We already have it for chv, but was missing for bdw. Signed-off-by: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-05drm/i915: Update the DSI enable path to support dualGaurav K Singh
We need to program both port registers during dual link enable path. v2: Address review comments by Jani - Used a for loop instead of do-while loop. v3: Used for_each_dsi_port macro instead of for loop v4: Renamed mode_hactive variable to mode_hdisplay Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com> Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-05drm/i915: Update the DSI disable path to support dual link panel disablingGaurav K Singh
We need to program both port registers during dual link disable path. v2: Address review comments by Jani - Used a for loop instead of do-while loop. v3: Used for_each_dsi_port macro instead of for loop v4: Added comments for the usage of AFE latchout bit Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com> Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-05drm/i915: MIPI Timings related changes for dual linkGaurav K Singh
hactive, hfp, hbp, hsync needs to be halved for dual link MIPI Panels. Accordingly timing related mmio regs needs to be programmed for both MIPI Ports. v2: Address review comments by Jani - Used a for loop instead of do-while loop v3: Used for_each_dsi_port macro instead of for loop Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com> Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-05drm/i915: cck reg used for checking DSI Pll lockedGaurav K Singh
Instead of pipe configuration reg, cck reg to be used for checking whether DSI Pll is getting locked or not. v2: dpio_lock unlocked now in case DSI PLL lock fails Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com> Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-05drm/i915: Enable DSI PLL for both DSI0 and DSI1 in case of dual linkGaurav K Singh
For Dual link MIPI Panels, dsipll clock for both DSI0 and DSI1 needs to be enabled. v2: Address review comments by Jani - Added wait time for PLL to be locked. v3: separate patch created for cck read for checking PLL to be locked Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com> Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-05drm/i915: Dual link needs Shutdown and Turn on packet for both portsGaurav K Singh
For dual link MIPI panels, SHUTDOWN packet needs to send to both Ports A & C during MIPI encoder disabling sequence. Similarly, TURN ON packet to be sent to both Ports during MIPI encoder enabling sequence. v2: Address review comments by Jani - Used a for loop instead of do-while loop. v3: Used for_each_dsi_port macro instead of for loop Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com> Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-05drm/i915: Pixel Clock changes for DSI dual linkGaurav K Singh
For dual link MIPI Panels, each port needs half of pixel clock. Pixel overlap can be enabled if needed by panel, then in that case, pixel clock will be increased for extra pixels. v2 : Address review comments by Jani - Removed the bit mask used for ->dual_link - Used DSI instead of MIPI for #define variables v3: Added the VLV_DISPLAY_BASE to VLV_CHICKEN_3 register Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com> Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-05drm/i915: Add support for port enable/disable for dual link configurationGaurav K Singh
For Dual Link MIPI Panels, both Port A and Port C should be enabled during the MIPI encoder enabling sequence. Similarly, during the disabling sequence, both ports needs to be disabled. v2: Used for_each_dsi_port macro instead of for loop v3: Used intel_dsi->ports instead of dual_link var for dual link configuration check v4: Masking of the required MIPI port bits before writing proper values Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com> Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-05drm/i915: s/MI_STORE_DWORD_IMM_GEN8/MI_STORE_DWORD_IMM_GEN4/Ville Syrjälä
MI_STORE_DWORD_IMM length has been the same ever since gen4. Rename the define to avoid potential confusion if someone tries to use this on pre-gen8. Also correct the comment on MI_MEM_VIRTUAL bit. It's present on 945,g33 and 965 only. Cc: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [danvet: Add USE_GGTT define for g4x+ too.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-05drm/i915: release struct_mutex on the i915_gem_init_hw fail pathJani Nikula
Release struct_mutex if init_rings() fails. This is a regression introduced in commit 35a57ffbb10840af219eeaf64718434242bb7c76 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Nov 20 00:33:07 2014 +0100 drm/i915: Only init engines once Reported-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-05drm/i915: Handle inaccurate time conversion issuesDaniel Vetter
So apparently jiffies<->nsec<->ktime isn't accurate or something. At elast if we timeout there's occasionally still a few hundred us left (in a 2 second timeout). Stuff I've tried and thrown out again: - Sampling the before timestamp before jiffies. Doesn't improve test path rate at all. - Using jiffies. Way to inaccurate, which means way too much drift with signals plus automatic ioctl restarting in userspace. In hindsight we should have used an absolute timeout, but hey we need something for v3 of the i915 gem wait interfaces ;-) - Trying to figure out where accuracy gets lost. gl testcase really don't care all that much about this (as long as isn't not massively off), it's just that the testcase gets a bit upset if it receives an EITME with timeout > 0. So as long as we're in the ballbark it's good enough. So patch everything up if we're at most one jiffies off. I get's me a solid test again. This regression is probably introduced in commit 5ed0bdf21a85d78e04f89f15ccf227562177cbd9 Author: Thomas Gleixner <tglx@linutronix.de> Date: Wed Jul 16 21:05:06 2014 +0000 drm: i915: Use nsec based interfaces Use ktime_get_raw_ns() and get rid of the back and forth timespec conversions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: John Stultz <john.stultz@linaro.org> Probably because I'm too lazy to confirm myself and still waiting for QA ;-) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82749 Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-12-05drm/i915: compute wait_ioctl timeout correctlyDaniel Vetter
We've lost the +1 required for correct timeouts in commit 5ed0bdf21a85d78e04f89f15ccf227562177cbd9 Author: Thomas Gleixner <tglx@linutronix.de> Date: Wed Jul 16 21:05:06 2014 +0000 drm: i915: Use nsec based interfaces Use ktime_get_raw_ns() and get rid of the back and forth timespec conversions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: John Stultz <john.stultz@linaro.org> So fix this up by reinstating our handrolled _timeout function. While at it bother with handling MAX_JIFFIES. v2: Convert to usecs (we don't care about the accuracy anyway) first to avoid overflow issues Dave Gordon spotted. v3: Drop the explicit MAX_JIFFY_OFFSET check, usecs_to_jiffies should take care of that already. It might be a bit too enthusiastic about it though. v4: Chris has a much nicer color, so use his implementation. This requires to export nsec_to_jiffies from time.c. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Gordon <david.s.gordon@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82749 Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Acked-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-12-05drm/i915: don't always do full mode sets when infoframes are enabledJesse Barnes
Partial revert of commit 206645910b9796bff13fcdb67bdca166b724ba62 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Wed Nov 5 14:26:09 2014 -0800 drm/i915: check for audio and infoframe changes across mode sets v2 References: https://bugs.freedesktop.org/show_bug.cgi?id=86683 Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by: Li Xu <li.l.xu@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-12-05amdkfd: Remove duplicate includeOded Gabbay
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
2014-12-05Merge tag 'drm-intel-fixes-2014-12-04' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes Silence some pch fifo underrun reports and panel locking backtraces, both cc: stable. * tag 'drm-intel-fixes-2014-12-04' of git://anongit.freedesktop.org/drm-intel: drm/i915: Unlock panel even when LVDS is disabled drm/i915: More cautious with pch fifo underruns
2014-12-05Merge tag 'drm-intel-next-fixes-2014-12-04' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next Fixes for 3.20. I did stick the gen3/4 reset work from Ville in because we have an awful lot of gen4 mesa hangs, and with this reset should also work on vintage i965g/gm (we already have reset for g4x/gen4.5). So should help to appease users suffering from these hangs. Otherwise all over. This is the last 3.20 pull from me, from here on Jani will take over. By Ville Syrjälä (8) and others * tag 'drm-intel-next-fixes-2014-12-04' of git://anongit.freedesktop.org/drm-intel: drm/i915: Reject modeset when the same digital port is used more than once drm/i915: mask RPS IRQs properly when disabling RPS drm/i915: Tune down spurious CRC interrupt warning drm/i915: Fix context object leak for legacy contexts drm/i915/skl: Update in Gen9 multi-engine forcewake range drm/i915/eDP: When enabling panel VDD cancel pending disable worker drm/i915: Handle runtime pm in the CRC setup code drm/i915: Disable crtcs gracefully before GPU reset on gen3/4 drm/i915: Grab modeset locks for GPU rest on pre-ctg drm/i915: Implement GPU reset for g33 drm/i915: Implement GPU reset for 915/945 drm/i915: Restore the display config after a GPU reset on gen4 drm/i915: Fix gen4 GPU reset drm/i915: Stop gathering error states for CS error interrupts drm/i915: Disallow pin ioctl completely for kms drivers drm/i915: Only warn the first time we attempt to mmio whilst suspended drm/i915/chv: Enable AVI, SPD and HDMI infoframes for CHV. drm/i915: Don't clobber crtc->new_config when nothing changes
2014-12-05Merge branch 'amdkfd-next-3.19' of ↵Dave Airlie
git://people.freedesktop.org/~gabbayo/linux into drm-next Just three more fixes for 3.19. This is the last request until -rc1. I will have our QA team run a full HSA stack test on 3.19-rc1 and if we find problems, I will send a fixes pull request. * 'amdkfd-next-3.19' of git://people.freedesktop.org/~gabbayo/linux: amdkfd: Set *buffer_ptr to NULL in case of error amdkfd: use atomic allocations within srcu callbacks amdkfd: use sizeof(long) granularity for the pasid bitmask
2014-12-04drm: Fix memory leak at error path of drm_read()Takashi Iwai
Note that the read manpages explicitly states that the read position is undefined on error. Since EFAULT is just a userspace bug we are therefore fine with just dropping the event on the floor. Signed-off-by: Takashi Iwai <tiwai@suse.de> [danvet: Add note that just dropping the event is ok.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-04amdkfd: Set *buffer_ptr to NULL in case of errorOded Gabbay
In function acquire_packet_buffer() we may return -ENOMEM. In that case, we should set the *buffer_ptr to NULL, so that calling functions which check the *buffer_ptr value as a criteria for success, will know that acquire_packet_buffer() failed. Reviewed-by: Alexey Skidanov <alexey.skidanov@amd.com> Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
2014-12-04drm/i915: Added port as parameter to the functions which does read/write of ↵Gaurav K Singh
DSI Controller This patch is in preparation of DSI dual link panels. For dual link panels, few packets needs to be sent to Port A or Port C or both. Based on the portno from MIPI Sequence Block#53, these sequences needs to be sent accordingly. v2: Addressed review comments by Jani - port variables named properly Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-04drm/i915: New functions added for enabling & disabling MIPI Port Ctrl regGaurav K Singh
This patch is in preparation for the DSI dual link port enable and disable related changes. Signed-off-by: Gaurav K Singh <gaurav.k.singh@intel.com> Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-04drm/i915: Don't display nonsensical values in i915_ddb_info on gen < 9Damien Lespiau
When playing around with debugfs and a HSW machine I noticed that we were displaying some garbled value in i915_ddb_info. This debugfs file is only meaningful for gen9+, so don't display anything on earlier platforms. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-04drm/i915: Stop putting GGTT VMA at the head of the listTvrtko Ursulin
Multiple GGTT VMAs per object will be introduced in the near future which will make it impossible to guarantee normal GGTT view is at the head of the list. Purpose of this patch is to break this assumption straight away so any potential hidden assumptions in the code base can be bisected to this simple patch. For: VIZ-4544 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Suggested-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-03drm/radeon: enable smc fan control on CIAlex Deucher
This seems to work well on CI boards after fixing the last few bugs noticed by Chernovsky Oleg. On boards with a high default fan speed this should reduce fan noise. Manual fan control is not enabled yet. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-12-04drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PMRafael J. Wysocki
After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM in 4 files under gpu/drm/exynos/. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com>
2014-12-03drm/radeon: use pointers instead of indexes for CS chunksChristian König
Nobody is interested at which index the chunk is. What's needed is a pointer to the chunk. Remove unused chunk_id field as well. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-12-03drm/radeon: remove duplicates checkChristian König
Completely unnecessary since the ww_mutex used to reserve a buffer can detect double reservations from the same thread anyway. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-12-03drm/ttm: optionally move duplicates to a separate listChristian König
This patch adds an optional list_head parameter to ttm_eu_reserve_buffers. If specified duplicates in the execbuf list are no longer reported as errors, but moved to this list instead. Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-12-03drm/radeon: check the right ring in radeon_evict_flags()Alex Deucher
Check the that ring we are using for copies is functional rather than the GFX ring. On newer asics we use the DMA ring for bo moves. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-12-03drm/radeon: fix copy paste typos in fan control for si/ciAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-12-03drm/radeon: Hide cursor on CRTCs used by fbdev (v2)Michel Dänzer
Since we are now preserving the cursor across modesets, the cursor could be left over in console if e.g. X crashed. v2: add comment about universal plane support Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-12-03drm/radeon: add spinlock for BO_VA status protection (v2)Christian König
Stop using the VM mutex for this v2: fix typo in comment Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-12-03drm/radeon: fence PT updates as sharedChristian König
The BO_VA contains everything necessary. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-12-03drm/radeon: rename radeon_cs_reloc to radeon_bo_listChristian König
Better match what it is actually doing. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-12-03drm/radeon: drop the handle from radeon_cs_relocChristian König
It's only used for duplicate check and that can be done on the original as well. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-12-03drm/radeon drop gobj from radeon_cs_relocChristian König
It's only used once after initializing and that ptr can be calculated from the BO as well. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-12-03drm/radeon: fix typo in new fan control registers for SI/CIAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-12-03drm/radeon: sync all BOs involved in a CSChristian König
Not just the userspace relocs, otherwise we won't wait for a swapped out page tables to be swapped in again. Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-12-03drm/radeon: Move hotspot handling out of radeon_set_cursorMichel Dänzer
It's only needed in radeon_crtc_cursor_set2. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-12-03drm/radeon: Re-show the cursor after a modesetMichel Dänzer
Setting a mode seems to clear the cursor registers, so we need to re-program them to make sure the cursor is visible. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-12-03drm/i915/skl: Update the DDI translation values for DP/eDP 1.3Damien Lespiau
Hardware team updated the recommended translation values for DP/eDP 1.3. This should help with some stability and HBR2 issues. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Satheeshakrishna M<satheeshakrishna.m@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-03drm/edid: Restore kerneldoc consistencyThierry Reding
Commit 18df89fef2d5 ("drm: Decouple EDID parsing from I2C adapter") renamed the adapter parameter of the drm_do_probe_ddc_edid function to data but didn't update the kerneldoc accordingly. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-03amdkfd: use atomic allocations within srcu callbacksSasha Levin
srcu callbacks are running in atomic context, we can't allocate using __GFP_WAIT. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
2014-12-03amdkfd: use sizeof(long) granularity for the pasid bitmaskSasha Levin
All the bit operations (such as find_first_zero_bit()) read sizeof(long) bytes at a time. If we allocated less than sizeof(long) bytes for the bitmask we would be accessing invalid memory when working with the bitmask. Change the allocator to allocate sizeof(long) multiples for the bitmask. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
2014-12-03drm/vmwgfx: (Re)bind shaders to MOBs with the correct offsetThomas Hellstrom
This codepath is mostly hit when rebinding after a backup buffer swapout. It's amazing that this error hasn't been more obvious but probably the shaders are not reread from guest memory that often.. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2014-12-03drm/vmwgfx: Fix fence event codeThomas Hellstrom
The commit "vmwgfx: Rework fence event action" introduced a number of bugs that are fixed with this commit: a) A forgotten return stateemnt. b) An if statement with identical branches. Cc: <stable@vger.kernel.org> Reported-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-16 23:35:16 +0000