summaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2009-03-28ACPI: fix CONFIG_ACPI=n buildLen Brown
drivers/gpu/drm/i915/i915_drv.c:102: error: too many arguments to function ‘intel_opregion_init’ Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-27ACPI: Populate DIDL before registering ACPI video device on IntelMatthew Garrett
Intel graphics hardware that implements the ACPI IGD OpRegion spec requires that the list of display devices be populated before any ACPI video methods are called. Detect when this is the case and defer registration until the opregion code calls it. Fixes crashes on HP laptops. http://bugzilla.kernel.org/show_bug.cgi?id=11259 Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-11drm/i915: fix 945 fence register writes for fence 8 and above.Eric Anholt
The last 8 fence registers sit at a different offset, so when we went to set fence number 8 in the lower offset, we instead set PGETBL_CTL, and the GPU got all sorts of angry at us. fd.o bug #20567. Easily reproducible by running glxgears and killing it about 6 times. Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-11drm/i915: Protect active fences on i915Chris Wilson
The i915 also uses the fence registers for GPU access to tiled buffers so we cannot reallocate one whilst it is on the active list. By performing a LRU scan of the fenced buffers we also avoid waiting the possibility of waiting on a pinned, or otherwise unusable, buffer. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-10drm/i915: Check to see if we've pinned all available fencesChris Wilson
We need to check and report if there are no available fences - or else we spin endlessly waiting for a buffer to magically unpin itself. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-10drm/i915: Check fence status on every pin.Chris Wilson
As we may steal the fence register of an unpinned buffer for another, every time we repin the buffer we need to recheck whether it needs to be allocated a fence. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-10drm/i915: First recheck for an empty fence register.Chris Wilson
If we wait upon a request and successfully unbind a buffer occupying a fence register, then that slot will be freed and cause a NULL derefrence upon rescanning. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-10drm/i915: Fix bad \n in MTRR failure notice.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-10drm/i915: Don't restore palettes through VGA registers.Pierre Willenbrock
The VGA registers just hit the pipe registers that we already set through MMIO. This fixes strange colors on resume. Signed-off-by: Pierre Willenbrock <pierre@pirsoft.de> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-10i915: add newline to i915_gem_object_pin failure msgKyle McMartin
Prevents formatting nasty as below: [drm:i915_gem_object_pin] *ERROR* Failure to bind: -12<3>[drm:i915_gem_evict_something] *ERROR* inactive empty 1 request empty 1 flushing empty 1 Signed-off-by: Kyle McMartin <kyle@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-10drm: Return EINVAL on duplicate objects in execbuffer object listKristian Høgsberg
If userspace passes an object list with the same object appearing more than once, we end up hitting the BUG_ON() in i915_gem_object_set_to_gpu_domain() as it gets called a second time for the same object. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-04drm: fix double lock typoHelge Bahmann
[airlied: you shall not retype patches from other trees half asleep] Signed-of-by: Dave Airlie <airlied@redhat.com>
2009-03-03drm/i915: Fix use-before-null-check in i915_irq_emit().Eric Anholt
This could be triggered by a client asking to emit an irq when the device wasn't initialized. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-03-03drm: Avoid client deadlocks when the master disappears.Thomas Hellstrom
This is done by 1) Wake up lock waiters when we close the master file descriptor. Not when the master structure is removed, since the latter requires the waiters themselves to release the refcount on the master structure -> Deadlock. 2) Send a SIGTERM to all clients waiting for the lock. Normally these clients will get a SIGPIPE when the X server dies, but clients may also spin trying to grab the DRM lock, without getting any sort of notification. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-03-03drm: Wake up all lock waiters when the master disappears.Thomas Hellstrom
Currently only one waiter is woken up, leaving other waiters hanging waiting for the DRM lock. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-03-03drm: Don't return ERESTARTSYS to user-space.Thomas Hellstrom
That return code is for in-kernel use only. Use EINTR instead. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-27Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: enable DMAR by default xen: disable interrupts early, as start_kernel expects gpu/drm, x86, PAT: io_mapping_create_wc and resource_size_t gpu/drm, x86, PAT: Handle io_mapping_create_wc() errors in a clean way x86, Voyager: fix compile by lifting the degeneracy of phys_cpu_present_map x86, doc: fix references to Documentation/x86/i386/boot.txt
2009-02-25gpu/drm, x86, PAT: Handle io_mapping_create_wc() errors in a clean wayVenkatesh Pallipadi
io_mapping_create_wc can return NULL on error and io_mapping_free() should be called on one of the error-cleanup path. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Eric Anholt <eric@anholt.net> Cc: Keith Packard <keithp@keithp.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-25drm/i915: convert DRM_ERROR to DRM_DEBUG in phys object pwrite pathDave Airlie
This snuck in when I wrote phys object support. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-25drm/i915: make hw page ioremap use ioremap_wcDave Airlie
However we still have another issue with ioremap_wc not falling back properly or somehow doing something else stupid, this probably needs to be tracked down. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-25drm: edid revision 0 is validKyle McMartin
edid->revision == 0 should be valid (at least, so the error message indicates. :) and wikipedia seems to indicate that EDID 1.0 existed. We can dump the entire check, since edid->revision is a u8, so it can't ever be less than 0. Marko reports in RH bz#476735 that his monitor claims to be EDID 1.0, and therefore hits the check and is stuck at 800x600 because of it. Reported-by: Marko Ristola <marko.ristola@kolumbus.fi> Signed-off-by: Kyle McMartin <kyle@redhat.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-25drm: Correct unbalanced drm_vblank_put() during mode setting.Chris Wilson
The first time we install a mode, the vblank will be disabled for a pipe and so drm_vblank_get() in drm_vblank_pre_modeset() will fail. As we unconditionally call drm_vblank_put() afterwards, the vblank reference counter becomes unbalanced. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-25drm: disable encoders before re-routing themJesse Barnes
In some cases we may receive a mode config that has a different CRTC<->encoder map that the current configuration. In that case, we need to disable any re-routed encoders before setting the mode, otherwise they may not pick up the new CRTC (if the output types are incompatible for example). Tested-by: Kristian Høgsberg <krh@bitplanet.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-25drm: Fix shifts of EDID vsync offset/width fields.Linus Torvalds
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-25drm/i915: handle bogus VBT panel timingJesse Barnes
We've seen cases in the wild where the VBT sync data is wrong, so add some code to fix it up in that case, taking care to make sure that the total is greater than the sync end. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-25drm/i915: remove PLL debugging messagesJesse Barnes
These are normal; we walk through different values looking for the right one, so why flood the screen with messages? Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-23i915: suspend/resume interrupt stateJesse Barnes
In the KMS case, enter/leavevt won't fix up the interrupt handler for us, so we need to do it at suspend/resume time. Make sure we don't fail the resume if the chip is hung either. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-23Fix an oops in i915_gem_retire_requests()Karsten Wiese
dev_priv->hw_status_page can be NULL, if i915_gem_retire_requests() is called from i915_gem_busy_ioctl(). Signed-off-by Karsten Wiese <fzu@wemgehoertderstaat.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-23drm/i915: Add missing mutex_lock(&dev->struct_mutex)Pierre Willenbrock
there might be a nicer way to fix this but this is the simplest for now. Signed-off-by: Pierre Willenbrock <pierre@pirsoft.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-23drm/i915: fix WC mapping in non-GEM i915 code.Jesse Barnes
[airlied - taken from mailing list posting] Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-23drm/i915: Fix regression in 95ca9dChris Wilson
The object is dereferenced before the NULL check. Oops. Fixes http://bugs.freedesktop.org/show_bug.cgi?id=20235 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-23drm/i915: Retire requests from i915_gem_busy_ioctl.Eric Anholt
This ensures that the user gets the latest information from the hardware on whether the buffer is busy, potentially reducing the working set of objects that the user chooses. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-23drm/i915: suspend/resume GEM when KMS is activeJesse Barnes
In the KMS case, we need to suspend/resume GEM as well. So on suspend, make sure we idle GEM and stop any new rendering from coming in, and on resume, re-init the framebuffer and clear the suspended flag. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-23drm/i915: Don't let a device flush to prepare buffers clear new write_domains.Eric Anholt
The problem was that object_set_to_gpu_domain would set the new write_domains that are getting set by this batchbuffer, then the accumulated flushes required for all the objects in preparation for this batchbuffer were posted, and the brand new write domain would get cleared by the flush being posted. Instead, hang on to the new (or old if we're not changing it) value and set it after the flush is queued. Results from this noticably included conformance test failures from reads shortly after writes (where the new write domain had been lost and thus not flushed and waited on), but is a suspected cause of hangs in some apps when a write domain is lost on a buffer that gets reused for instruction or commmand state. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-23drm/i915: Cut two args to set_to_gpu_domain that confused this tricky path.Eric Anholt
While not strictly required, it helped while thinking about the following change. This change should be invariant. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-20drm/radeon: update sarea copies of last_ variables on resume.etienne
This fixes a regression reported in bug #12613. [airlied: not I tweaked the patch slightly and fixed it by etienne did all the hardwork so gets authorship] Signed-off-by: etienne <etienne.basset@numericable.fr> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-20drm/i915: Keep refs on the object over the lifetime of vmas for GTT mmap.Jesse Barnes
This fixes potential fault at fault time if the object was unreferenced while the mapping still existed. Now, while the mmap_offset only lives for the lifetime of the object, the object also stays alive while a vma exists that needs it. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-20drm/i915: take struct mutex around fb unrefJesse Barnes
Need to do this in case the unref ends up doing a free. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-20drm: Use spread spectrum when the bios tells us it's ok.Kristian Høgsberg
Lifted from the DDX modesetting. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-20drm: Collapse identical i8xx_clock() and i9xx_clock().Kristian Høgsberg
They used to be different. Now they're identical. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-20drm: Bring PLL limits in sync with DDX values.Kristian Høgsberg
Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-20drm: Add locking around cursor gem operations.Kristian Høgsberg
We need to hold the struct_mutex around pinning and the phys object operations. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-20drm: Propagate failure from setting crtc base.Chris Wilson
Check the error paths within intel_pipe_set_base() to first cleanup and then report back the error. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-20drm: Check for a NULL encoder when reverting on error pathChris Wilson
We need to skip the connectors with a NULL encoder to match the success path and avoid an OOPS. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-20drm/i915: Cleanup the hws on ringbuffer constrution failure.Chris Wilson
If we fail to create the ringbuffer, then we need to cleanup the allocated hws. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-20drm/i915: Don't add panel_fixed_mode to the probed modes list at LVDS init.Steve Aarnio
In the case where no EDID data is read from the device, adding the panel_fixed_mode pointer to the probed modes list causes data corruption. If the panel_fixed_mode pointer is added to the probed modes list at init time, a copy of the mode is added again at drm_get_modes() request time. Then, the panel_fixed_mode pointer is freed because it is seen as a duplicate mode. Unfortunately, this pointer is still stored and used in mode_fixup(). Because the panel_fixed_mode data is copied and returned at drm_get_modes() time, it is unnecessary to add this information at init time. Signed-off-by: Steve Aarnio <steve.j.aarnio@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-20drm: Release user fbs in drm_releaseKristian Høgsberg
Avoids leaking fbs and associated buffers on release. Signed-off-by: Kristian Høgsberg <krh@redhat.com> Tested-by: Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-20drm/i915: Unpin the fb on error during construction.Chris Wilson
If we fail whilst constructing the fb, then we need to unpin it as well. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-20drm/i915: Unpin the hws if we fail to kmap.Chris Wilson
A missing unpin on the error path. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-20drm/i915: Unpin the ringbuffer if we fail to ioremap it.Chris Wilson
A missing unpin on the error path. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>