| Age | Commit message (Collapse) | Author |
|---|
|
Foxlink's fl500wvr00-a0t supports RGB888 format.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Thierry Reding <treding@nvidia.com>
|
|
Provide a way to specify panel requirement in terms of supported media bus
format (particularly useful for panels connected to an RGB or LVDS bus).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Thierry Reding <treding@nvidia.com>
|
|
Add bus_formats and num_bus_formats fields and
drm_display_info_set_bus_formats helper function to specify the bus
formats supported by a given display.
This information can be used by display controller drivers to configure
the output interface appropriately (i.e. RGB565, RGB666 or RGB888 on raw
RGB or LVDS busses).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Thierry Reding <treding@nvidia.com>
|
|
git://git.pengutronix.de/git/pza/linux into drm-next
imx-drm mode fixup support, imx-hdmi bridge conversion and imx-drm cleanup
- Implement mode_fixup for a DI vertical timing limitation
- Use generic DRM OF helpers in DRM core
- Convert imx-hdmi to dw_hdmi drm_bridge and add rockchip
driver
- Add DC use counter to fix multi-display support
- Simplify handling of DI clock flags
- A few small fixes and cleanup
* tag 'imx-drm-next-2015-01-09' of git://git.pengutronix.de/git/pza/linux: (26 commits)
imx-drm: core: handling of DI clock flags to ipu_crtc_mode_set()
gpu: ipu-di: Switch to DIV_ROUND_CLOSEST for DI clock divider calc
gpu: ipu-v3: Use videomode in struct ipu_di_signal_cfg
imx-drm: encoder prepare/mode_set must use adjusted mode
imx-drm: ipuv3-crtc: Implement mode_fixup
drm_modes: add drm_display_mode_to_videomode
gpu: ipu-di: remove some non-functional code
gpu: ipu-di: Add ipu_di_adjust_videomode()
drm: rockchip: export functions needed by rockchip dw_hdmi bridge driver
drm: bridge/dw_hdmi: request interrupt only after initializing the mutes
drm: bridge/dw_hdmi: add rockchip rk3288 support
dt-bindings: Add documentation for rockchip dw hdmi
drm: bridge/dw_hdmi: add function dw_hdmi_phy_enable_spare
drm: bridge/dw_hdmi: clear i2cmphy_stat0 reg in hdmi_phy_wait_i2c_done
drm: bridge/dw_hdmi: add mode_valid support
drm: bridge/dw_hdmi: add support for multi-byte register width access
dt-bindings: add document for dw_hdmi
drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi
drm: imx: imx-hdmi: split phy configuration to platform driver
drm: imx: imx-hdmi: convert imx-hdmi to drm_bridge mode
...
|
|
* 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev:
drm: rcar-du: Implement support for interlaced modes
drm: rcar-du: Clamp DPMS states to on and off
drm: rcar-du: Enable hotplug detection on HDMI connector
drm: rcar-du: Output HSYNC instead of CSYNC
drm: rcar-du: Add support for external pixel clock
drm: rcar-du: Refactor DEFR8 feature
drm: rcar-du: Remove LVDS and HDMI encoders chaining restriction
drm: rcar-du: Configure pitch for chroma plane of multiplanar formats
drm: rcar-du: Don't fail probe in case of partial encoder init error
drm: adv7511: Remove interlaced mode check
|
|
git://people.freedesktop.org/~gabbayo/linux into drm-next
- Add support for SDMA usermode queues
- Replace logic of sub-allocating from GART buffer in amdkfd. Instead
of using radeon_sa module, use a new module that is more suited for
this purpose
- Add the number of watch points to amdkfd topology
- Split a function that did two things into two seperate functions.
* tag 'drm-amdkfd-next-2015-01-09' of git://people.freedesktop.org/~gabbayo/linux:
drm/amd: Remove old radeon_sa funcs from kfd-->kgd interface
drm/radeon: Remove old radeon_sa usage from kfd-->kgd interface
drm/amdkfd: Using new gtt sa in amdkfd
drm/amdkfd: Allocate gart memory using new interface
drm/amdkfd: Fixed calculation of gart buffer size
drm/amdkfd: Add kfd gtt sub-allocator functions
drm/amdkfd: Add gtt sa related data to kfd_dev struct
drm/radeon: Impl. new gtt allocate/free functions
drm/amd: Add new kfd-->kgd interface for gart usage
drm/radeon: Enable sdma preemption
drm/amdkfd: Pass queue type to pqm_create_queue()
drm/amdkfd: Identify SDMA queue in create queue ioctl
drm/amdkfd: Add SDMA user-mode queues support to QCM
drm/amdkfd: Add SDMA mqd support
drm/radeon: Implement SDMA interface functions
drm/amd: Add SDMA functions to kfd-->kgd interface
drm/amdkfd: Process-device data creation and lookup split
drm/amdkfd: Add number of watch points to topology
|
|
git://people.freedesktop.org/~gabbayo/linux into drm-fixes
- Remove the interrupt SW ring buffer impl. as it is not used by any module
in amdkfd.
- Fix a sparse warning
* tag 'drm-amdkfd-fixes-2015-01-13' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: Fix sparse warning (different address space)
drm/amdkfd: Drop interrupt SW ring buffer
|
|
git://anongit.freedesktop.org/drm-intel into drm-fixes
misc i915 fixes
* tag 'drm-intel-fixes-2015-01-15' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Fix mutex->owner inspection race under DEBUG_MUTEXES
drm/i915: Ban Haswell from using RCS flips
drm/i915: vlv: sanitize RPS interrupt mask during GPU idling
drm/i915: fix HW lockup due to missing RPS IRQ workaround on GEN6
drm/i915: gen9: fix RPS interrupt routing to CPU vs. GT
|
|
There are still some places in the fb helper that need to avoid
sleeping in panic context. Here's an example:
[ 65.615496] bad: scheduling from the idle thread!
[ 65.620747] CPU: 92 PID: 0 Comm: swapper/92 Tainted: G M E 3.18.0-rc4-7-default+ #20
[ 65.630364] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS
BRHSXSD1.86B.0056.R01.1409242327 09/24/2014
[ 65.641923] ffff88087f693d80 ffff88087f689878 ffffffff81566db9 0000000000000000
[ 65.650226] ffff88087f693d80 ffff88087f689898 ffffffff810871ff ffff88046eb3e0d0
[ 65.658527] ffff88087f693d80 ffff88087f6898c8 ffffffff8107c1fa 000000017f6898b8
[ 65.666830] Call Trace:
[ 65.669557] <#MC> [<ffffffff81566db9>] dump_stack+0x46/0x58
[ 65.675994] [<ffffffff810871ff>] dequeue_task_idle+0x2f/0x40
[ 65.682412] [<ffffffff8107c1fa>] dequeue_task+0x5a/0x80
[ 65.688345] [<ffffffff810804f3>] deactivate_task+0x23/0x30
[ 65.694569] [<ffffffff81569050>] __schedule+0x580/0x7f0
[ 65.700502] [<ffffffff81569739>] schedule_preempt_disabled+0x29/0x70
[ 65.707696] [<ffffffff8156abb6>] __ww_mutex_lock_slowpath+0xb8/0x162
[ 65.714891] [<ffffffff8156acb3>] __ww_mutex_lock+0x53/0x85
[ 65.721125] [<ffffffffa00b3a5d>] drm_modeset_lock+0x3d/0x110 [drm]
[ 65.728132] [<ffffffffa00b3c2a>] __drm_modeset_lock_all+0x8a/0x120 [drm]
[ 65.735721] [<ffffffffa00b3cd0>] drm_modeset_lock_all+0x10/0x30 [drm]
[ 65.743015] [<ffffffffa01af8bf>] drm_fb_helper_pan_display+0x2f/0xf0 [drm_kms_helper]
[ 65.751857] [<ffffffff8132bd21>] fb_pan_display+0xd1/0x1a0
[ 65.758081] [<ffffffff81326010>] bit_update_start+0x20/0x50
[ 65.764400] [<ffffffff813259f2>] fbcon_switch+0x3a2/0x550
[ 65.770528] [<ffffffff813a01c9>] redraw_screen+0x189/0x240
[ 65.776750] [<ffffffff81322f8a>] fbcon_blank+0x20a/0x2d0
[ 65.782778] [<ffffffff8137d359>] ? erst_writer+0x209/0x330
[ 65.789002] [<ffffffff810ba2f3>] ? internal_add_timer+0x63/0x80
[ 65.795710] [<ffffffff810bc137>] ? mod_timer+0x127/0x1e0
[ 65.801740] [<ffffffff813a0cd8>] do_unblank_screen+0xa8/0x1d0
[ 65.808255] [<ffffffff813a0e10>] unblank_screen+0x10/0x20
[ 65.814381] [<ffffffff812ca0d9>] bust_spinlocks+0x19/0x40
[ 65.820508] [<ffffffff81561ca7>] panic+0x106/0x1f5
[ 65.825955] [<ffffffff8102336c>] mce_panic+0x2ac/0x2e0
[ 65.831789] [<ffffffff812c796a>] ? delay_tsc+0x4a/0x80
[ 65.837625] [<ffffffff81024e1f>] do_machine_check+0xbaf/0xbf0
[ 65.844138] [<ffffffff813365d7>] ? intel_idle+0xc7/0x150
[ 65.850166] [<ffffffff8156f03f>] machine_check+0x1f/0x30
[ 65.856195] [<ffffffff813365d7>] ? intel_idle+0xc7/0x150
[ 65.862222] <<EOE>> [<ffffffff814283d5>] cpuidle_enter_state+0x55/0x170
[ 65.869823] [<ffffffff814285a7>] cpuidle_enter+0x17/0x20
[ 65.875852] [<ffffffff81097b08>] cpu_startup_entry+0x2d8/0x370
[ 65.882467] [<ffffffff8102fe29>] start_secondary+0x159/0x180
There's __drm_modeset_lock_all() which Daniel Vetter introduced for this
purpose. We can leverage that without reinventing anything. This patch
works with the latest kernel.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rui Wang <rui.y.wang@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
This pull request includes below fixups,
- Remove duplicated machine checking.
. It seems that this code was added when you merged 'v3.18-rc7' into
drm-next. commit id : e8115e79aa62b6ebdb3e8e61ca4092cc32938afc
- Fix hdmiphy reset.
. Exynos hdmi has two interfaces to control hdmyphy, one is I2C, other
is APB bus - memory mapped I/O. So this patch makes hdmiphy reset
to be done according to interfaces, I2C or APB bus.
- And add some exception codes.
* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: fix warning of vblank reference count
drm/exynos: remove unnecessary runtime pm operations
drm/exynos: fix reset codes for memory mapped hdmi phy
drm/exynos: remove the redundant machine checking code
|
|
CP microcode uses undocumented bits in this register to record queue
state information. The KFD zeroes these bits in update_mqd, when invoked
through the UPDATE_QUEUE ioctl, causing incoherent state when the ioctl
is used to successively unmap and map a queue.
Since the queue type cannot be changed in this path, move the MQD write
to init_mqd.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
|
|
dqm->queue_count tracks queues in the active state only. In a few
places this count is modified unconditionally, leading to an incorrect
value when the UPDATE_QUEUE ioctl is used to make a queue inactive.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
|
|
Fixes a case where we call vmw_fifo_idle() from within a wait function with
task state !TASK_RUNNING, which is illegal.
In addition, make the locking fine-grained, so that it is performed once
for every read- and write operation. This is of course more costly, but we
don't perform much register access in the timing critical paths anyway. Instead
we have the extra benefit of being sure that we don't forget the hw lock around
register accesses. I think currently the kms code was quite buggy w r t this.
This fixes Red Hat Bugzilla Bug 1180796
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
|
|
This patch replaces the two current amdkfd module parameters with a new one.
The current parameters that are being replaced are:
- Maximum number of HSA processes
- Maximum number of queues per process
The new parameter that replaces them is called "Maximum queues per device"
This replacement achieves two goals:
- Allows the user to have as many HSA processes as it wants (until
a maximum of 512 HSA processes in Kaveri).
- Removes the limitation the user had on maximum number of queues per HSA
process. E.g. the user can now have processes which only have one queue and
other processes which have hundreds of queues, while before the user
couldn't have more than 128 queues per process (as default).
The default value of the new parameter is 4096 (32 * 128, which were the
defaults of the old parameters). There is almost no additional GART memory
required for the default case. As a reminder, this amount of queues requires a
little bit below 4MB of GART memory.
v2:
In addition, This patch defines a new counter for queues accounting in the DQM
structure. This is done because the current counter only counts active queues
which allows the user to create more queues than the
max_num_of_queues_per_device module parameter allows.
However, we need the current counter for the runlist packet build process, so
the solution is to have a dedicated counter for this accounting.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Ben Goz <ben.goz@amd.com>
|
|
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Prevented re-enabling the vblank interrupt by drm_vblank_off and
drm_vblank_get from mixer_wait_for_vblank returns error after
drm_vblank_off. We get below warnings without this error handling
because vblank reference count is mismatched by above sequence.
setting mode 1920x1080-60Hz@XR24 on connectors 16, crtc 13
[ 19.900793] ------------[ cut here ]------------
[ 19.903959] WARNING: CPU: 0 PID: 0 at drivers/gpu/drm/drm_irq.c:1072 exynos_drm_crtc_finish_pageflip+0xac/0xdc()
[ 19.914076] Modules linked in:
[ 19.917116] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.19.0-rc4-00040-g3d729789-dirty #46
[ 19.925342] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[ 19.931437] [<c0014430>] (unwind_backtrace) from [<c001158c>] (show_stack+0x10/0x14)
[ 19.939131] [<c001158c>] (show_stack) from [<c04cdd50>] (dump_stack+0x84/0xc4)
[ 19.946329] [<c04cdd50>] (dump_stack) from [<c00226f4>] (warn_slowpath_common+0x80/0xb0)
[ 19.954382] [<c00226f4>] (warn_slowpath_common) from [<c00227c0>] (warn_slowpath_null+0x1c/0x24)
[ 19.963132] [<c00227c0>] (warn_slowpath_null) from [<c02c20cc>] (exynos_drm_crtc_finish_pageflip+0xac/0xdc)
[ 19.972841] [<c02c20cc>] (exynos_drm_crtc_finish_pageflip) from [<c02cb7ec>] (mixer_irq_handler+0xdc/0x104)
[ 19.982546] [<c02cb7ec>] (mixer_irq_handler) from [<c005c904>] (handle_irq_event_percpu+0x78/0x134)
[ 19.991555] [<c005c904>] (handle_irq_event_percpu) from [<c005c9fc>] (handle_irq_event+0x3c/0x5c)
[ 20.000395] [<c005c9fc>] (handle_irq_event) from [<c005f384>] (handle_fasteoi_irq+0xe0/0x1ac)
[ 20.008885] [<c005f384>] (handle_fasteoi_irq) from [<c005bf88>] (generic_handle_irq+0x2c/0x3c)
[ 20.017463] [<c005bf88>] (generic_handle_irq) from [<c005c254>] (__handle_domain_irq+0x7c/0xec)
[ 20.026128] [<c005c254>] (__handle_domain_irq) from [<c0008698>] (gic_handle_irq+0x30/0x68)
[ 20.034449] [<c0008698>] (gic_handle_irq) from [<c00120c0>] (__irq_svc+0x40/0x74)
[ 20.041893] Exception stack(0xc06fff68 to 0xc06fffb0)
[ 20.046923] ff60: 00000000 00000000 000052f6 c001b460 c06fe000 c07064e8
[ 20.055070] ff80: c04d743c c07392a2 c0739440 c06da340 ef7fca80 00000000 01000000 c06fffb0
[ 20.063212] ffa0: c000f24c c000f250 60000013 ffffffff
[ 20.068245] [<c00120c0>] (__irq_svc) from [<c000f250>] (arch_cpu_idle+0x38/0x3c)
[ 20.075611] [<c000f250>] (arch_cpu_idle) from [<c0050948>] (cpu_startup_entry+0x108/0x16c)
[ 20.083846] [<c0050948>] (cpu_startup_entry) from [<c06aec5c>] (start_kernel+0x3a0/0x3ac)
[ 20.091980] ---[ end trace 2c76ee0500489d1b ]---
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
In booting, we can see a below message.
[ 3.241728] exynos-mixer 14450000.mixer: Unbalanced pm_runtime_enable!
Already pm_runtime_enable is called by probe function. Remove
pm_runtime_enable/disable from mixer_bind and mixer_unbind.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This fixes reset codes to support memory mapped hdmi phy as well as hdmi
phy dedicated i2c lines.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Instead of pushing each byte via stack the specifier allows to supply the
pointer and length to dump buffers up to 64 bytes long.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This is an important optimization for avoiding read-after-write (RAW)
stalls in the HiZ buffer. Certain workloads would run very slowly with
HiZ enabled, but run much faster with the "hiz=false" driconf option.
With this patch, they run at full speed even with HiZ.
Increases performance in OglVSInstancing by about 2.7x on Braswell.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This is an important optimization for avoiding read-after-write (RAW)
stalls in the HiZ buffer. Certain workloads would run very slowly with
HiZ enabled, but run much faster with the "hiz=false" driconf option.
With this patch, they run at full speed even with HiZ.
Improves performance in OglVSInstancing by 3.2x on Broadwell GT3e
(Iris Pro 6200).
Thanks to Jesse Barnes and Ben Widawsky for their help in tracking this
down. Thanks to Chris Wilson for showing me the new workarounds system.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This was accidently lost in 76a0df859def.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
If the first queue created was failed on DQM then PQM should
unregister the process from DQM.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
|
|
This patch completely removes the sync_with_hw() because it was broken and
actually there is no point of using it.
This function was used to:
- Make sure that the submitted packet to the HIQ (which is a kernel queue) was
read by the CP. However, it was discovered that the method this function used
to do that (checking wptr == rptr) is not consistent with how the actual CP
firmware works in all cases.
- Make sure that the queue is empty before issuing the next packet. To achieve
that, the function blocked amdkfd from continuing until the recently
submitted packet was consumed. However, the acquire_packet_buffer() already
checks if there is enough room for a new packet so calling sync_with_hw() is
redundant.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In order not to occupy the current core and thus prevent the core from
servicing IOMMU PPR requests, this patch replaces the call in DQM to
cpu_relax() with a call to schedule().
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It is useful to know at debug time if we are keeping main link on.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
No functional changes on this patch. Just grouping the link_standy decision
to avoid miss any change. Also making this info available everywhere
which will help to decide when to use vbt's tp time on following patch.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
[danvet: Slight editing of the commit message which was one huge
run-on sentence.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Let's respect vbt full_link (link_standby) on source side as well.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
We have only two possible states with so many names and combinations that
might be confusing.
1 - Main link active / enabled / stand by / on
2 - Main link disabled / off / full off
Let's start organizing it by fixing a inverted logic when setting the sink bit.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
These conditions applies only to Haswell and we were also checking for them
on Valleyview/Cherryview.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
ON these platforms we don't have hardware tracking working for any case.
So we need to fake this on software by forcing psr to exit on every
flush.
Manual tests indicated this was needed.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Description of the 'state' parameter for intel_plane_destroy_state() was
missing and the intel_atomic_plane.c file section heading did not match
drm.tmpl.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This patch fixes a minor bug in allocate_hqd(), where the loop run from the
next-to-allocate pipe until the number of pipes.
This is wrong because we need to consider the possibility where
next-to-allocate pipe is not 0, and thus, the for-loop only checks part of the
pipes and doesn't wrap-around, as it supposed to do.
Therefore, we add another counting variable to make sure we go over all the
pipes, regardless of where we start to look at the first iteration of the loop.
This bug only affected non-HWS mode. In HWS mode, the CP fw is responsible for
allocating the HQD.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
|
|
915 doens't support hotplug at all, so we shouldn't try to pretend
otherwise in the SDVO code.
Note: i915 does have hotplug support in hw, we simply never enabled it
in i915.ko: There's only one hpd bit for all outputs, so not worth the
bother to add this special case for this rather old platform.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
[danvet: Clarify that only i915.ko doesn't support hpd on i915g.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
If we determine that a specific port is eDP, don't register the HDMI
connector/encoder for it. The reason being that we want to disable
HPD interrupts for eDP ports when the display is off, but the presence
of the extra HDMI connector would demand the HPD interrupt to remain
enabled all the time.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The dev_priv->display.hpd_irq_setup hook is optional, so we can move the
I915_HAS_HOTPLUG() check out of i915_hpd_irq_setup() and only set up the
hook when hotplug support is present.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
intel_hpd_irq_handler() walks the passed in hpd[] array assuming it
contains HPD_NUM_PINS elements. Currently that's not true as we don't
specify an explicit size for the arrays when initializing them. Avoid
the out of bounds accesses by specifying the size for the arrays.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This reverts commit 5a0afd4b78ec23f27f5d486ac3d102c2e8d66bd7.
Although timeout mode allows higher residency it impact badly on performance.
I believe while we don't have a way to balance between performance and
power savings at runtime I believe we have to revert and prioritize
performance that was impacted a lot.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88103
Cc: Deepak S <deepak.s@linux.intel.com>
Cc: Wendy Wang <wendy.wang@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Found by reading the HIZ_CHICKEN documentation.
Improves performance in a HiZ microbenchmark by around 50%.
Improves performance in OglZBuffer by around 18%.
Thanks to Chris Wilson for helping me figure out where to put this.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
A previous commit enabled execlists by default:
commit 27401d126b5b ("drm/i915/bdw: Enable execlists by default where supported")
This allowed routine testing of execlists which exposed a regression when
resuming from suspend. The cause was tracked down the to recent changes to the
ring init sequence:
commit 35a57ffbb108 ("drm/i915: Only init engines once")
During a suspend/resume cycle the hardware Context Status Buffer write pointer
is reset. However since the recent changes to the init sequence the software CSB
read pointer is no longer reset. This means that context status events are not
handled correctly and new contexts are not written to the ELSP, resulting in an
apparent GPU hang.
Pending further changes to the ring init code, just move the
ring->next_context_status_buffer initialization into gen8_init_common_ring to
fix this regression.
v2: Moved init into gen8_init_common_ring rather than context_enable after
feedback from Daniel Vetter. Updated commit msg to reflect this and also cite
commits related to the regression. Fixed bz link to correct bug.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88096
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Thomas Daniel <thomas.daniel@intel.com>
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The userspace-requested plane coordinates are now always available via
plane->state.base (and the i915-adjusted values are stored in
plane->state), so we no longer use the coordinate fields in intel_plane
and can drop them.
Also, note that the error case for pageflip calls update_plane() to
program the values from plane->state; it's simpler to just call
intel_plane_restore() which does the same thing.
v2: Replace manual update_plane() with intel_plane_restore() in pageflip
error handler.
Reviewed-by(v1): Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Switch plane handling to use the atomic plane helpers. This means that
rather than provide our own implementations of .update_plane() and
.disable_plane(), we expose the lower-level check/prepare/commit/cleanup
entrypoints and let the DRM core implement update/disable for us using
those entrypoints.
The other main change that falls out of this patch is that our
drm_plane's will now always have a valid plane->state that contains the
relevant plane state (initial state is allocated at plane creation).
The base drm_plane_state pointed to holds the requested source/dest
coordinates, and the subclassed intel_plane_state holds the adjusted
values that our driver actually uses.
v2:
- Renamed file from intel_atomic.c to intel_atomic_plane.c (Daniel)
- Fix a copy/paste comment mistake (Bob)
v3:
- Use prepare/cleanup functions that we've already factored out
- Use newly refactored pre_commit/commit/post_commit to avoid sleeping
during vblank evasion
v4:
- Rebase to latest di-nightly requires adding an 'old_state' parameter
to atomic_update;
v5:
- Must have botched a rebase somewhere and lost some work. Restore
state 'dirty' flag to let begin/end code know which planes to
run the pre_commit/post_commit hooks for. This would have actually
shown up as broken in the next commit rather than this one.
v6:
- Squash kerneldoc patch into this one.
- Previous patches have now already taken care of most of the
infrastructure that used to be in this patch. All we're adding here
now is some thin wrappers.
v7:
- Check return of intel_plane_duplicate_state() for allocation
failures.
v8:
- Drop unused drm_plane_state -> intel_plane_state cast. (Ander)
- Squash in actual transition to plane helpers. Significant
refactoring earlier in the patchset has made the combined
prep+transition much easier to swallow than it was in earlier
iterations. (Ander)
v9:
- s/track_fbs/disabled_planes/ in the atomic crtc flags. The only fb's
we need to update frontbuffer tracking for are those on a plane about
to be disabled (since the atomic helpers never call prepare_fb() when
disabling a plane), so the new name more accurately describes what
we're actually tracking.
Testcase: igt/kms_plane
Testcase: igt/kms_universal_plane
Testcase: igt/kms_cursor_crc
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
A few of the sprite-related function names in i915 are very similar
(e.g., intel_enable_planes() vs intel_crtc_enable_planes()) and don't
make it clear whether they only operate on sprite planes, or whether
they also apply to all universal plane types. Rename a few functions to
be more consistent with our function naming for primary/cursor planes or
to clarify that they apply specifically to sprite planes:
- s/intel_disable_planes/intel_disable_sprite_planes/
- s/intel_enable_planes/intel_enable_sprite_planes/
Also, drop the sprite-specific intel_destroy_plane() and just use
the type-agnostic intel_plane_destroy() function. The extra 'disable'
call that intel_destroy_plane() did is unnecessary since the plane will
already be disabled due to framebuffer destruction by the point it gets
called.
v2: Earlier consolidation patches have reduced the number of functions
we need to rename here.
v3: Also rename intel_plane_funcs vtable to intel_sprite_plane_funcs
for consistency with primary/cursor. (Ander)
v4: Convert comment for intel_plane_destroy() to kerneldoc now that it
is no longer a static function. (Ander)
Reviewed-by(v1): Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Move the vblank evasion up from the low-level, hw-specific
update_plane() handlers to the general plane commit operation.
Everything inside commit should now be non-sleeping, so this brings us
closer to how vblank evasion will behave once we move over to atomic.
v2:
- Restore lost intel_crtc->active check on vblank evasion
v3:
- Replace assert_pipe_enabled() in intel_disable_primary_hw_plane()
with an intel_crtc->active test; it turns out assert_pipe_enabled()
grabs some mutexes and can sleep, which we can't do with interrupts
disabled.
v4:
- Equivalent to v2; v3 change is now squashed into an earlier patch
of the series. (Ander).
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Once we integrate our work into the atomic pipeline, plane commit
operations will need to happen with interrupts disabled, due to vblank
evasion. Our commit functions today include sleepable work, so those
operations need to be split out and run either before or after the
atomic register programming.
The solution here calculates which of those operations will need to be
performed during the 'check' phase and sets flags in an intel_crtc
sub-struct. New intel_begin_crtc_commit() and
intel_finish_crtc_commit() functions are added before and after the
actual register programming; these will eventually be called from the
atomic plane helper's .atomic_begin() and .atomic_end() entrypoints.
v2: Fix broken sprite code split
v3: Make the pre/post commit work crtc-based to match how we eventually
want this to be called from the atomic plane helpers.
v4: Some platforms that haven't had their watermark code reworked were
waiting for vblank, then calling update_sprite_watermarks in their
platform-specific disable code. These also need to be flagged out
of the critical section.
v5: Sprite plane test for primary show/hide should just set the flag to
wait for pending flips, not actually perform the wait. (Ander)
v6:
- Rebase onto latest di-nightly; picks up an important runtime PM fix.
- Handle 'wait_for_flips' flag in intel_begin_crtc_commit(). (Ander)
- Use wait_for_flips flag for primary plane update rather than
performing the wait in the check routine.
- Added kerneldoc to pre_disable/post_enable functions that are no
longer static. (Ander)
- Replace assert_pipe_enabled() in intel_disable_primary_hw_plane()
with an intel_crtc->active test; it turns out assert_pipe_enabled()
grabs some mutexes and can sleep, which we can't do with interrupts
disabled.
v7:
- Check for fb != NULL when deciding whether the sprite plane hides the
primary plane during a sprite update. (PRTS)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
If CONFIG_BUG=n __WARN_printf won't be defined leading to the below
build failure. The double underscores should have told us to steer clear
of it anyway.
drivers/gpu/drm/i915/intel_display.c: In function ‘assert_pll’:
drivers/gpu/drm/i915/intel_display.c:1027:2: error: implicit declaration
of function ‘__WARN_printf’ [-Werror=implicit-function-declaration]
I915_STATE_WARN(cur_state != state,
Use WARN(1, ...) instead. It handles CONFIG_BUG=n gracefully and, with
the constant condition, a sane compiler should reduce it to
__WARN_printf.
This is a regression introduced by
commit e2c719b75c8c186deb86570d8466df9e9eff919b
Author: Rob Clark <robdclark@gmail.com>
Date: Mon Dec 15 13:56:32 2014 -0500
drm/i915: tame the chattermouth (v2)
Reported-by: Jim Davis <jim.epost@gmail.com>
Reference: http://mid.gmane.org/CA+r1ZhgHTi7bS2irhtuSUs9aO=Br1dumN8=oAOeaMJDZ_ZhwBw@mail.gmail.com
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This adds a quirks list to fix stability problems with
certain SI boards.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=76490
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
