summaryrefslogtreecommitdiffstats
path: root/drivers/hid/hid-magicmouse.c
AgeCommit message (Collapse)Author
2010-10-01HID: magicmouse: Adjust major / minor axes to scaleHenrik Rydberg
By visual inspection, the reported touch_major and touch_minor axes are roughly a factor of four too small. The factor is approximate, since the protocol is not known and the HID report encodes touch size with fewer bits than positions. This patch scales the reported values by a factor of four. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Michael Poole <mdpoole@troilus.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-24HID: magicmouse: Use hid-input parsing rather than bypassing itMichael Poole
Let the HID core handle input device setup and HID-compliant reports. This driver then only has to worry about the non-standard reports. Signed-off-by: Michael Poole <mdpoole@troilus.org> Acked-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-03HID: magicmouse: enable Magic Trackpad supportChase Douglas
The trackpad speaks a similar, but different, protocol from the magic mouse. However, only small code tweaks here and there are needed to make basic multitouch work. Extra logic is required for single-touch emulation of the touchpad. The changes made here take the approach that only one finger may emulate the single pointer when multiple fingers have touched the screen. Once that finger is raised, all touches must be raised before any further single touch events can be sent. Sometimes the magic trackpad sends two distinct touch reports as one big report. Simply splitting the packet in two and resending them through magicmouse_raw_event ensures they are handled properly. I also added myself to the copyright statement. Signed-off-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Michael Poole <mdpoole@troilus.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-03HID: magicmouse: simplify touch data bit manipulationChase Douglas
The new format should be easier to read to determine which bits correspond to which data. It also brings all the manipulation logic to the top of the function. This makes size and orientation reading more clear. Note that the impetus for this change is the forthcoming support for the Magic Trackpad, which has a different touch data protocol. Signed-off-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Michael Poole <mdpoole@troilus.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-03HID: magicmouse: simplify multitouch feature requestChase Douglas
Only the first feature request is required to put the Magic Mouse into multitouch mode. This is also the case for the Magic Trackpad, for which support will be added in a later commit. Signed-off-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Michael Poole <mdpoole@troilus.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-02HID: magicmouse: remove timestamp logicChase Douglas
The timestamps from the device are currently stored in the private data structure. These aren't used, so remove them. I've left a comment detailing the protocol for future reference. Signed-off-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Michael Poole <mdpoole@troilus.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-09-02HID: magicmouse: simplify touch down logicChase Douglas
For the MT protocol, we need to properly keep track of each down touch. This change simplifies the logic, and should make things easier when support for the Magic Trackpad is added. Signed-off-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Michael Poole <mdpoole@troilus.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-11HID: magicmouse: Correct parsing of large X and Y motions.Michael Poole
The X and Y values have two more significant bits in the same byte that contains click status. Include these in the reported value. Thanks to Iain Hibbert of NetBSD for pointing this out. Signed-off-by: Michael Poole <mdpoole@troilus.org> Acked-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-07-11HID: magicmouse: report last touch upChase Douglas
The evdev multitouch protocol requires that a last MT sync event must be sent after all touches are up. This change adds the last MT sync event to the hid-magicmouse driver. Also, don't send events when a touch leaves. Signed-off-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Michael Poole <mdpoole@troilus.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-24HID: magicmouse: enable horizontal scrollingChase Douglas
Mimicks OS X behavior. Signed-off-by: Chase Douglas <chase.douglas@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-24HID: magicmouse: add param for scroll speedChase Douglas
The new scroll_speed param takes an integer value from 0 to 63, where 0 is slowest and 63 is fastest. The default of 32 remains the same. This parameter also affects scroll acceleration linearly. A second part of this change is a tightly coupled modification to the scroll acceleration. Previously, scroll acceleration could be reset without lifting the scroll finger. This is rather unintuitive and hard to control in the case where a user wants faster scrolling, but wants to hold the scroll touch for longer than a moment. Note that scroll acceleration levels are now 1-7, where 7 is slowest. In the previous implementation, there were 8 levels defined, but it was impossible to start at the slowest level. In order to keep the default scroll speed unchanged, only 7 levels are used now. Signed-off-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Michael Poole <mdpoole@troilus.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-24HID: magicmouse: properly account for scroll movement in stateChase Douglas
Before this change, sequential scroll events would take a variable amount of movement due to incorrect accounting. This change ensures all scroll movements require a deterministic touch movement for an action to occur. Signed-off-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Michael Poole <mdpoole@troilus.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-04HID: magicmouse: disable and add module param for scroll accelerationChase Douglas
Scroll acceleration is unique to the magicmouse driver, and is unintuitive to a user who is unaware of the functionality. Thus, disable it by default, but add a module parameter to enable it for power users who want it. Signed-off-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Michael Poole <mdpoole@troilus.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-04HID: magicmouse: scroll on entire surface, not just middle of mouseChase Douglas
Previously, scroll events only occurred when the user moved a touch along the middle of the touch surface. This is unintuitive for a normal user who is not aware of this. The device has a uniform surface, so the distinction is artificial. This change removes the touch area check for a scroll event, which replicates the OS X behavior. Signed-off-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Michael Poole <mdpoole@troilus.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-12HID: magicmouse: fix input registrationJiri Kosina
When HIDRAW is not set, hid_hw_start() returns ENODEV as no subsystem has claimed the magicmouse device, and probe routine bails out. Which is not what we want. This happens because magicmouse driver is instantiating the connection to Input subsystem itself, and since commit 28918c211d86b ("HID: magicmouse: fix oops after device removal") the HID core is not registering input device itself. Fix this by letting HID core register the input device (so that hid_hw_start() succeeds, as the device is claimed by at least one subsystem) and de-register it again later before proceeding with proper input setup. Reported-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-09HID: magicmouse: fix oops after device removalMichael Poole
Ask the HID core not to register an input device for the mouse. Fix an oops after removing the device, due to leaving the new input device registered. Signed-off-by: Michael Poole <mdpoole@troilus.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-11HID: magicmouse: coding style and probe failure fixesMichael Poole
Use proper values to initialize bool configuration variables, tabs rather than spaces, no braces for one-line else clause, __set_bit() when the operation doesn't have to be atomic, input_set_abs_params() rather than writing the fields directly, and call hid_hw_stop() when appropriate to handle failures in the probe. Signed-off-by: Michael Poole <mdpoole@troilus.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-10HID: add a device driver for the Apple Magic Mouse.Michael Poole
The Magic Mouse requires that a driver send an unlock Report(Feature) command, similar to the Wacom wireless tablet and Sixaxis controller quirks. This turns on an Input Report that isn't published in the input Report descriptor that contains touch data (and usually overrides the normal motion and click Report). Because the mouse has only one switch and no scroll wheel, the driver (under control of parameters) emulates a middle button and scroll wheel. User space could also ignore and/or re-synthesize those events based on the reported events. Some user-space tools to talk to the mouse directly (that is, when it is not associated with the host's HIDP stack) are at http://github.com/entrope/linux-magicmouse Signed-off-by: Michael Poole <mdpoole@troilus.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>