summaryrefslogtreecommitdiffstats
path: root/drivers/hid/usbhid
AgeCommit message (Collapse)Author
2012-05-22Merge branches 'upstream-fixes', 'wacom' and 'waltop' into for-linusJiri Kosina
Conflicts: drivers/hid/hid-core.c
2012-05-22Merge branch 'upstream' into for-linusJiri Kosina
Conflicts: drivers/hid/hid-core.c
2012-05-01USB: hid-core.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01usbhid: prevent deadlock during timeoutOliver Neukum
On some HCDs usb_unlink_urb() can directly call the completion handler. That limits the spinlocks that can be taken in the handler to locks not held while calling usb_unlink_urb() To prevent a race with resubmission, this patch exposes usbcore's infrastructure for blocking submission, uses it and so drops the lock without causing a race in usbhid. Signed-off-by: Oliver Neukum <oneukum@suse.de> Acked-by: Jiri Kosina <jkosina@suse.cz> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01HID: Create a common generic driverHenrik Rydberg
Move the hid drivers of the bus drivers to a common generic hid driver, and make it a proper module. This ought to simplify device handling moving forward. Cc: Gustavo Padovan <gustavo@padovan.org> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-01HID: Create a generic device groupHenrik Rydberg
Devices that do not have a special driver are handled by the generic driver. This patch does the same thing using device groups; Instead of forcing a particular driver, the appropriate driver is picked up by udev. As a consequence, one can now move a device from generic to specific handling by a simple rebind. By adding a new device id to the generic driver, the same thing can be done in reverse. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-27HID: hiddev: Use vzalloc to allocate hiddev_listHavard Skinnemoen
Everytime a HID device is opened, a new hiddev_list is allocated with kzalloc. This requires 64KB of physically contiguous memory, which could easily push a heavily loaded system over the edge. Allocating the same amount of memory with vmalloc shouldn't be nearly as demanding, so let's do that instead. The memory isn't used for DMA and doesn't look particularly performance sensitive, so this should be safe. Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-25USB: usbmouse.c: remove err() usageGreg Kroah-Hartman
err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-03HID: usbhid: Check HID report descriptor contents after device resetSimon Haggett
When a USB device reset occurs, usbcore will refetch the device and configuration descriptors and compare them with those retrieved before the reset to ensure that they have not changed. For USB HID devices, this implicitly includes the HID class descriptor (as this is fetched with the configuration descriptor). However, the HID report descriptor is not checked again. Whilst a change in the size of the HID report descriptor will be detected (as this is held in the class descriptor), content changes to the report descriptor which do not result in a change in its size will be missed. If a firmware update were applied to a USB HID device which resulted in such a change to the report descriptor after device reset, then this would not be picked up by usbhid. This patch fixes this issue by allowing usbhid to check the contents of the report descriptor after the device reset, and trigger a rebind of the device if there is a mismatch. Reviewed-by: Toby Gray <toby.gray@realvnc.com> Signed-off-by: Simon Haggett <simon.haggett@realvnc.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-30HID: usbhid: fix error handling of not enough bandwidthOliver Neukum
In case IO cannot be started because there is a lack of bandwidth on the bus, it makes no sense to reset the device. If IO is requested because the device is opened, user space should be notified with an error right away. If the lack of bandwidth arises later, for example after resume, there's no other choice but to retry in the hope that bandwidth will be freed. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-28HID: waltop: Add support for Sirius tabletNikolai Kondrashov
Add support for Waltop Sirius Battery Free Tablet. VisTablet Muse and Princeton PTB-S1BK are other possible names of this tablet. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-20Merge branch 'upstream' into for-linusJiri Kosina
Conflicts: drivers/hid/Makefile
2012-03-20Merge branches 'battery-scope', 'logitech' and 'multitouch' into for-linusJiri Kosina
2012-03-06HID: usbhid: add quirk no_get for quanta 3008 devicesBenjamin Tissoires
Some quanta devices do not like to be polled for reports descriptors, thus this quirk. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-28HID: kye: Add support for 3 tabletsNikolai Kondrashov
Add support for three KYE tablets: EasyPen i405X, MousePen i608X, EasyPen M610X. Update Kconfig entry accordingly, remove EXPERT dependency. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-27HID: usbhid: Add NOGET quirk for the AIREN Slim+ keyboardAlan Stern
This patch (as1531) adds a NOGET quirk for the Slim+ keyboard marketed by AIREN. This keyboard seems to have a lot of bugs; NOGET works around only one of them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: okias <d.okias@gmail.com> CC: <stable@vger.kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-21HID: Add quirk for CH Products FighterstickVille Ranki
CH Fighterstick requires HID_QUIRK_NOGET as many other CH devices do. This patch adds device id for Fighterstick and adds necessary line to HID quirk list. Signed-off-by: Ville Ranki <ville.ranki@iki.fi> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-02HID: usbhid: fix dead lock between open and disconectMing Lei
There is no reason to hold hiddev->existancelock before calling usb_deregister_dev, so move it out of the lock. The patch fixes the lockdep warning below. [ 5733.386271] ====================================================== [ 5733.386274] [ INFO: possible circular locking dependency detected ] [ 5733.386278] 3.2.0-custom-next-20120111+ #1 Not tainted [ 5733.386281] ------------------------------------------------------- [ 5733.386284] khubd/186 is trying to acquire lock: [ 5733.386288] (minor_rwsem){++++.+}, at: [<ffffffffa0011a04>] usb_deregister_dev+0x37/0x9e [usbcore] [ 5733.386311] [ 5733.386312] but task is already holding lock: [ 5733.386315] (&hiddev->existancelock){+.+...}, at: [<ffffffffa0094d17>] hiddev_disconnect+0x26/0x87 [usbhid] [ 5733.386328] [ 5733.386329] which lock already depends on the new lock. [ 5733.386330] [ 5733.386333] [ 5733.386334] the existing dependency chain (in reverse order) is: [ 5733.386336] [ 5733.386337] -> #1 (&hiddev->existancelock){+.+...}: [ 5733.386346] [<ffffffff81082d26>] lock_acquire+0xcb/0x10e [ 5733.386357] [<ffffffff813df961>] __mutex_lock_common+0x60/0x465 [ 5733.386366] [<ffffffff813dfe4d>] mutex_lock_nested+0x36/0x3b [ 5733.386371] [<ffffffffa0094ad6>] hiddev_open+0x113/0x193 [usbhid] [ 5733.386378] [<ffffffffa0011971>] usb_open+0x66/0xc2 [usbcore] [ 5733.386390] [<ffffffff8111a8b5>] chrdev_open+0x12b/0x154 [ 5733.386402] [<ffffffff811159a8>] __dentry_open.isra.16+0x20b/0x355 [ 5733.386408] [<ffffffff811165dc>] nameidata_to_filp+0x43/0x4a [ 5733.386413] [<ffffffff81122ed5>] do_last+0x536/0x570 [ 5733.386419] [<ffffffff8112300b>] path_openat+0xce/0x301 [ 5733.386423] [<ffffffff81123327>] do_filp_open+0x33/0x81 [ 5733.386427] [<ffffffff8111664d>] do_sys_open+0x6a/0xfc [ 5733.386431] [<ffffffff811166fb>] sys_open+0x1c/0x1e [ 5733.386434] [<ffffffff813e7c79>] system_call_fastpath+0x16/0x1b [ 5733.386441] [ 5733.386441] -> #0 (minor_rwsem){++++.+}: [ 5733.386448] [<ffffffff8108255d>] __lock_acquire+0xa80/0xd74 [ 5733.386454] [<ffffffff81082d26>] lock_acquire+0xcb/0x10e [ 5733.386458] [<ffffffff813e01f5>] down_write+0x44/0x77 [ 5733.386464] [<ffffffffa0011a04>] usb_deregister_dev+0x37/0x9e [usbcore] [ 5733.386475] [<ffffffffa0094d2d>] hiddev_disconnect+0x3c/0x87 [usbhid] [ 5733.386483] [<ffffffff8132df51>] hid_disconnect+0x3f/0x54 [ 5733.386491] [<ffffffff8132dfb4>] hid_device_remove+0x4e/0x7a [ 5733.386496] [<ffffffff812c0957>] __device_release_driver+0x81/0xcd [ 5733.386502] [<ffffffff812c09c3>] device_release_driver+0x20/0x2d [ 5733.386507] [<ffffffff812c0564>] bus_remove_device+0x114/0x128 [ 5733.386512] [<ffffffff812bdd6f>] device_del+0x131/0x183 [ 5733.386519] [<ffffffff8132def3>] hid_destroy_device+0x1e/0x3d [ 5733.386525] [<ffffffffa00916b0>] usbhid_disconnect+0x36/0x42 [usbhid] [ 5733.386530] [<ffffffffa000fb60>] usb_unbind_interface+0x57/0x11f [usbcore] [ 5733.386542] [<ffffffff812c0957>] __device_release_driver+0x81/0xcd [ 5733.386547] [<ffffffff812c09c3>] device_release_driver+0x20/0x2d [ 5733.386552] [<ffffffff812c0564>] bus_remove_device+0x114/0x128 [ 5733.386557] [<ffffffff812bdd6f>] device_del+0x131/0x183 [ 5733.386562] [<ffffffffa000de61>] usb_disable_device+0xa8/0x1d8 [usbcore] [ 5733.386573] [<ffffffffa0006bd2>] usb_disconnect+0xab/0x11f [usbcore] [ 5733.386583] [<ffffffffa0008aa0>] hub_thread+0x73b/0x1157 [usbcore] [ 5733.386593] [<ffffffff8105dc0f>] kthread+0x95/0x9d [ 5733.386601] [<ffffffff813e90b4>] kernel_thread_helper+0x4/0x10 [ 5733.386607] [ 5733.386608] other info that might help us debug this: [ 5733.386609] [ 5733.386612] Possible unsafe locking scenario: [ 5733.386613] [ 5733.386615] CPU0 CPU1 [ 5733.386618] ---- ---- [ 5733.386620] lock(&hiddev->existancelock); [ 5733.386625] lock(minor_rwsem); [ 5733.386630] lock(&hiddev->existancelock); [ 5733.386635] lock(minor_rwsem); [ 5733.386639] [ 5733.386640] *** DEADLOCK *** [ 5733.386641] [ 5733.386644] 6 locks held by khubd/186: [ 5733.386646] #0: (&__lockdep_no_validate__){......}, at: [<ffffffffa00084af>] hub_thread+0x14a/0x1157 [usbcore] [ 5733.386661] #1: (&__lockdep_no_validate__){......}, at: [<ffffffffa0006b77>] usb_disconnect+0x50/0x11f [usbcore] [ 5733.386677] #2: (hcd->bandwidth_mutex){+.+.+.}, at: [<ffffffffa0006bc8>] usb_disconnect+0xa1/0x11f [usbcore] [ 5733.386693] #3: (&__lockdep_no_validate__){......}, at: [<ffffffff812c09bb>] device_release_driver+0x18/0x2d [ 5733.386704] #4: (&__lockdep_no_validate__){......}, at: [<ffffffff812c09bb>] device_release_driver+0x18/0x2d [ 5733.386714] #5: (&hiddev->existancelock){+.+...}, at: [<ffffffffa0094d17>] hiddev_disconnect+0x26/0x87 [usbhid] [ 5733.386727] [ 5733.386727] stack backtrace: [ 5733.386731] Pid: 186, comm: khubd Not tainted 3.2.0-custom-next-20120111+ #1 [ 5733.386734] Call Trace: [ 5733.386741] [<ffffffff81062881>] ? up+0x34/0x3b [ 5733.386747] [<ffffffff813d9ef3>] print_circular_bug+0x1f8/0x209 [ 5733.386752] [<ffffffff8108255d>] __lock_acquire+0xa80/0xd74 [ 5733.386756] [<ffffffff810808b4>] ? trace_hardirqs_on_caller+0x15d/0x1a3 [ 5733.386763] [<ffffffff81043a3f>] ? vprintk+0x3f4/0x419 [ 5733.386774] [<ffffffffa0011a04>] ? usb_deregister_dev+0x37/0x9e [usbcore] [ 5733.386779] [<ffffffff81082d26>] lock_acquire+0xcb/0x10e [ 5733.386789] [<ffffffffa0011a04>] ? usb_deregister_dev+0x37/0x9e [usbcore] [ 5733.386797] [<ffffffff813e01f5>] down_write+0x44/0x77 [ 5733.386807] [<ffffffffa0011a04>] ? usb_deregister_dev+0x37/0x9e [usbcore] [ 5733.386818] [<ffffffffa0011a04>] usb_deregister_dev+0x37/0x9e [usbcore] [ 5733.386825] [<ffffffffa0094d2d>] hiddev_disconnect+0x3c/0x87 [usbhid] [ 5733.386830] [<ffffffff8132df51>] hid_disconnect+0x3f/0x54 [ 5733.386834] [<ffffffff8132dfb4>] hid_device_remove+0x4e/0x7a [ 5733.386839] [<ffffffff812c0957>] __device_release_driver+0x81/0xcd [ 5733.386844] [<ffffffff812c09c3>] device_release_driver+0x20/0x2d [ 5733.386848] [<ffffffff812c0564>] bus_remove_device+0x114/0x128 [ 5733.386854] [<ffffffff812bdd6f>] device_del+0x131/0x183 [ 5733.386859] [<ffffffff8132def3>] hid_destroy_device+0x1e/0x3d [ 5733.386865] [<ffffffffa00916b0>] usbhid_disconnect+0x36/0x42 [usbhid] [ 5733.386876] [<ffffffffa000fb60>] usb_unbind_interface+0x57/0x11f [usbcore] [ 5733.386882] [<ffffffff812c0957>] __device_release_driver+0x81/0xcd [ 5733.386886] [<ffffffff812c09c3>] device_release_driver+0x20/0x2d [ 5733.386890] [<ffffffff812c0564>] bus_remove_device+0x114/0x128 [ 5733.386895] [<ffffffff812bdd6f>] device_del+0x131/0x183 [ 5733.386905] [<ffffffffa000de61>] usb_disable_device+0xa8/0x1d8 [usbcore] [ 5733.386916] [<ffffffffa0006bd2>] usb_disconnect+0xab/0x11f [usbcore] [ 5733.386921] [<ffffffff813dff82>] ? __mutex_unlock_slowpath+0x130/0x141 [ 5733.386929] [<ffffffffa0008aa0>] hub_thread+0x73b/0x1157 [usbcore] [ 5733.386935] [<ffffffff8106a51d>] ? finish_task_switch+0x78/0x150 [ 5733.386941] [<ffffffff8105e396>] ? __init_waitqueue_head+0x4c/0x4c [ 5733.386950] [<ffffffffa0008365>] ? usb_remote_wakeup+0x56/0x56 [usbcore] [ 5733.386955] [<ffffffff8105dc0f>] kthread+0x95/0x9d [ 5733.386961] [<ffffffff813e90b4>] kernel_thread_helper+0x4/0x10 [ 5733.386966] [<ffffffff813e24b8>] ? retint_restore_args+0x13/0x13 [ 5733.386970] [<ffffffff8105db7a>] ? __init_kthread_worker+0x55/0x55 [ 5733.386974] [<ffffffff813e90b0>] ? gs_change+0x13/0x13 Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (68 commits) hid-input/battery: add FEATURE quirk hid-input/battery: remove battery_val hid-input/battery: power-supply type really *is* a battery hid-input/battery: make the battery setup common for INPUTs and FEATUREs hid-input/battery: deal with both FEATURE and INPUT report batteries hid-input/battery: add quirks for battery hid-input/battery: remove apparently redundant kmalloc hid-input: add support for HID devices reporting Battery Strength HID: hid-multitouch: add support 9 new Xiroku devices HID: multitouch: add support for 3M 32" HID: multitouch: add support of Atmel multitouch panels HID: usbhid: defer LED setting to a workqueue HID: usbhid: hid-core: submit queued urbs before suspend HID: usbhid: remove LED_ON HID: emsff: use symbolic name instead of hardcoded PID constant HID: Enable HID_QUIRK_MULTI_INPUT for Trio Linker Plus II HID: Kconfig: fix syntax HID: introduce proper dependency of HID_BATTERY on POWER_SUPPLY HID: multitouch: support PixArt optical touch screen HID: make parser more verbose about parsing errors by default ... Fix up rename/delete conflict in drivers/hid/hid-hyperv.c (removed in staging, moved in this branch) and similarly for the rules for same file in drivers/staging/hv/{Kconfig,Makefile}.
2012-01-08Merge branch 'for-linus2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits) reiserfs: Properly display mount options in /proc/mounts vfs: prevent remount read-only if pending removes vfs: count unlinked inodes vfs: protect remounting superblock read-only vfs: keep list of mounts for each superblock vfs: switch ->show_options() to struct dentry * vfs: switch ->show_path() to struct dentry * vfs: switch ->show_devname() to struct dentry * vfs: switch ->show_stats to struct dentry * switch security_path_chmod() to struct path * vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb vfs: trim includes a bit switch mnt_namespace ->root to struct mount vfs: take /proc/*/mounts and friends to fs/proc_namespace.c vfs: opencode mntget() mnt_set_mountpoint() vfs: spread struct mount - remaining argument of next_mnt() vfs: move fsnotify junk to struct mount vfs: move mnt_devname vfs: move mnt_list to struct mount vfs: switch pnode.h macros to struct mount * ...
2012-01-05Merge branches 'hyperv', 'multitouch', 'roccat', 'upstream', ↵Jiri Kosina
'upstream-fixes', 'wacom' and 'wiimote' into for-linus
2012-01-03switch device_get_devnode() and ->devnode() to umode_t *Al Viro
both callers of device_get_devnode() are only interested in lower 16bits and nobody tries to return anything wider than 16bit anyway. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-12-21HID: usbhid: defer LED setting to a workqueueDaniel Kurtz
Defer LED setting action to a workqueue. This is more likely to send all LED change events in a single URB. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-21HID: usbhid: hid-core: submit queued urbs before suspendDaniel Kurtz
If any userspace program has opened a keyboard device, the input core de-activates the keyboard's LEDs upon suspend(). It does this by sending individual EV_LED[LED_X]=0 events to the underlying device driver by directly calling the driver's registered event() handler. The usb-hid driver event() handler processes each request by immediately attempting to submit a CTRL URB to turn off the LED. USB URB submission is asynchronous. First the URB is added to the head of the ctrl queue. Then, if the CTRL_RUNNING flag is false, the URB is submitted immediately (and CTRL_RUNNING is set). If the CTRL_RUNNING flag was already true, then the newly queued URB is submitted in the ctrl completion handler when all previously submitted URBs have completed. When all queued URBs have been submitted, the completion handler clears the CTRL_RUNNING flag. In the 2-LED suspend case, at input suspend(), 2 LED event CTRL URBs get queued, with only the first actually submitted. Soon after input suspend() handler finishes, the usb-hid suspend() handler gets called. Since this is NOT a PM_EVENT_AUTO suspend, the handler sets REPORTED_IDLE, then waits for io to complete. Unfortunately, this usually happens while the first LED request is actually still being processed. Thus when the completion handler tries to submit the second LED request it fails, since REPORTED_IDLE is already set! This REPORTED_IDLE check failure causes the completion handler to complete, however without clearing the CTRL_RUNNING flag. This, in turn, means that the suspend() handler's wait_io() condition is never satisfied, and instead it times out after 10 seconds, aborting the original system suspend. This patch changes the behavior to the following: (1) allow completion handler to finish submitting all queued URBs, even if REPORTED_IDLE is set. This guarantees that all URBs queued before the hid-core suspend() call will be submitted before the system is suspended. (2) if REPORTED_IDLE is set and the URB queue is empty, queue, but don't submit, new URB submission requests. These queued requests get submitted when resume() flushes the URB queue. This is similar to the existing behavior, however, any requests that arrive while the queue is not yet empty will still get submitted before suspend. (3) set the RUNNING flag when flushing the URB queue in resume(). This keeps URBs that were queued in (2) from colliding with any new URBs that are being submitted during the resume process. The new URB submission requests upon resume get properly queued behind the ones being flushed instead of the current situation where they collide, causing memory corruption and oopses. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-21HID: usbhid: remove LED_ONDaniel Kurtz
LED_ON was defined in the original version of the hid-core autosuspend patch. However, during review, the setting and clearing of it was redone using ledcount. The test was left in accidentally. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-21HID: Enable HID_QUIRK_MULTI_INPUT for Trio Linker Plus IIIgnaz Forster
Add quirk for the Trio Linker Plus II - the adapter supports several controllers simultaneously, generating a new HID entry for each connected device. Signed-off-by: Ignaz Forster <ignaz.forster@gmx.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-15HID: multitouch: support PixArt optical touch screenAaron Tian
This patch modifies hid-multitouch driver for supporting PixArt optical touch screen. Because of the device does not have to set initial report, we apply "HID_QUIRK_NO_INIT_REPORTS" quirk and add the device into hid_blacklist[] Signed-off-by: Aaron Tian <aaron_tian@pixart.com.tw> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23HID: usbkbd: kill LED URB on disconnectWillem Penninckx
The LED URB was left unkilled when the USB device is disconnected. Signed-off-by: Willem Penninckx <willem.penninckx@cs.kuleuven.be> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-23HID: usbkbd: synchronize LED URB submissionWillem Penninckx
usb_kbd_event() and usb_kbd_led() can be called concurrently, but they are not synchronized. They both readwrite kbd->leds, and usb_kbd_event() originally just checked the URB status field, while urb.h states that "It [status field] should not be examined before the URB is returned to the completion handler." To fix this unsynchronized behavior, this patch introduces a boolean representing whether the URB is submitted, and a spinlock. Signed-off-by: Willem Penninckx <willem.penninckx@cs.kuleuven.be> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-18USB: convert drivers/hid/* to use module_usb_driver()Greg Kroah-Hartman
This converts the drivers in drivers/hid/* to use the module_usb_driver() macro which makes the code smaller and a bit simpler. Added bonus is that it removes some unneeded kernel log messages about drivers loading and/or unloading. Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-31hid: Fix up files needing export.h for EXPORT_SYMBOLPaul Gortmaker
With module.h being implicitly everywhere via device.h, the absence of explicitly including something for EXPORT_SYMBOL went unnoticed. Since we are heading to fix things up and clean module.h from the device.h file, we need to explicitly include these files now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-25Merge branch 'pm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (63 commits) PM / Clocks: Remove redundant NULL checks before kfree() PM / Documentation: Update docs about suspend and CPU hotplug ACPI / PM: Add Sony VGN-FW21E to nonvs blacklist. ARM: mach-shmobile: sh7372 A4R support (v4) ARM: mach-shmobile: sh7372 A3SP support (v4) PM / Sleep: Mark devices involved in wakeup signaling during suspend PM / Hibernate: Improve performance of LZO/plain hibernation, checksum image PM / Hibernate: Do not initialize static and extern variables to 0 PM / Freezer: Make fake_signal_wake_up() wake TASK_KILLABLE tasks too PM / Hibernate: Add resumedelay kernel param in addition to resumewait MAINTAINERS: Update linux-pm list address PM / ACPI: Blacklist Vaio VGN-FW520F machine known to require acpi_sleep=nonvs PM / ACPI: Blacklist Sony Vaio known to require acpi_sleep=nonvs PM / Hibernate: Add resumewait param to support MMC-like devices as resume file PM / Hibernate: Fix typo in a kerneldoc comment PM / Hibernate: Freeze kernel threads after preallocating memory PM: Update the policy on default wakeup settings PM / VT: Cleanup #if defined uglyness and fix compile error PM / Suspend: Off by one in pm_suspend() PM / Hibernate: Include storage keys in hibernation image on s390 ...
2011-10-25Merge branch 'upstream' into for-linusJiri Kosina
Conflicts: drivers/hid/hid-core.c drivers/hid/hid-ids.h
2011-10-21HID: Add device IDs for more SJOY adaptersSean Young
Support the following models: Super Joy Box 3 Pro, Super Dual Box Pro and Super Joy Box 5 Pro. These models have support for pressure sensitive buttons and they can force the controller to either digital or analog mode, both of which are not supported yet. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-13HID: usbhid: cancel timer for retry synchronouslyOliver Neukum
This makes sure IO is never restarted while a reset is going on In particular there seems to be no protection from hid_retry_timeout() calling hid_start_in() which would start IO after hid_pre_reset() has already called hid_cease_io() because that uses del_timer(), not del_timer_sync() Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-07Merge branch 'pm-runtime' into pm-for-linusRafael J. Wysocki
* pm-runtime: PM / Tracing: build rpm-traces.c only if CONFIG_PM_RUNTIME is set PM / Runtime: Replace dev_dbg() with trace_rpm_*() PM / Runtime: Introduce trace points for tracing rpm_* functions PM / Runtime: Don't run callbacks under lock for power.irq_safe set USB: Add wakeup info to debugging messages PM / Runtime: pm_runtime_idle() can be called in atomic context PM / Runtime: Add macro to test for runtime PM events PM / Runtime: Add might_sleep() to runtime PM functions
2011-09-27HID: hiddev: potential info leak in hiddev_ioctl()Dan Carpenter
Smatch has a new check for Rosenberg type information leaks where structs are copied to the user with uninitialized stack data in them. In this case, the hiddev_devinfo struct has a two byte hole. struct hiddev_devinfo { __u32 bustype; /* 0 4 */ __u32 busnum; /* 4 4 */ __u32 devnum; /* 8 4 */ __u32 ifnum; /* 12 4 */ __s16 vendor; /* 16 2 */ __s16 product; /* 18 2 */ __s16 version; /* 20 2 */ /* XXX 2 bytes hole, try to pack */ __u32 num_applications; /* 24 4 */ Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-25HID: add support for HuiJia USB Gamepad connectorClemens Werther
Create each gamepad as a separate joystick Signed-off-by: Clemens Werther <clemens.werther@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-23HID: usbhid: Add support for SiGma Micro chipJeremiah Matthey
Patch to add SiGma Micro-based keyboards (1c4f:0002) to hid-quirks. These keyboards dont seem to allow the records to be initialized, and hence a timeout occurs when the usbhid driver attempts to initialize them. The patch just adds the signature for these keyboards to the hid-quirks list with the setting HID_QUIRK_NO_INIT_REPORTS. This removes the 5-10 second wait for the timeout to occur. Signed-off-by: Jeremiah Matthey <sprg86@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-08-19PM / Runtime: Add macro to test for runtime PM eventsAlan Stern
This patch (as1482) adds a macro for testing whether or not a pm_message value represents an autosuspend or autoresume (i.e., a runtime PM) event. Encapsulating this notion seems preferable to open-coding the test all over the place. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-15IHD: Support force feedback on MP-8866Sean Young
Support force feedback on the Dual USB Force Feedback Joypad (MP-8866). Signed-off-by: Sean Young <sean@mess.org> Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-22Merge branches 'roccat', 'upstream' and 'wiimote' into for-linusJiri Kosina
2011-06-07HID: yurex: recognize GeneralKeys wireless presenter as generic HIDTomoki Sekiyama
Unfortunately, the device seems to have the same Vendor ID and Product ID as YUREX leg-shakes sensors, and the commit 6bc235a2e2 ("USB: add driver for Meywa-Denki & Kayac YUREX") added the ID to hid_ignore_list. I believe that we can distinguish YUREX and the Wireless Presenter by device type. The patch below makes the driver ignore only YUREX (bInterfaceProtocol==0), and recognize Wireless Presenter (bInterfaceProtocol is keyboard or mouse) as generic HID. (I don't have the Wireless Presenter, so not yet ested.) ** YUREX lsusb information: Bus 002 Device 007: ID 0c45:1010 Microdia Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0c45 Microdia idProduct 0x1010 bcdDevice 0.03 iManufacturer 1 JESS iProduct 2 YUREX iSerial 3 10000269 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 31 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0002 (Bus Powered) Remote Wakeup Enabled Addresses https://bugzilla.kernel.org/show_bug.cgi?id=26922 Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> Cc: Greg KH <gregkh@suse.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Maciej Rutecki <maciej.rutecki@gmail.com> Reported-by: Thomas B?chler <thomas@archlinux.org> Tested-by: Thomas B?chler <thomas@archlinux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-26HID: hiddev: fix use after free in hiddev_releaseDan Carpenter
There are a couple use after free bugs here. Signed-off-by: Dan Carpenter <error27@gmail.com> [jkosina@suse.cz: removed already fixed hunk] Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-24HID: add quirk for HyperPen 10000UJimmy Hon
Add 5543:0064 UC-Logic Technology Corp. Aiptek HyperPen 10000U to quirks with HID_QUIRK_MULTI_INPUT. Originally the device is reporting the x,y coordinates on Z and RX. By adding this quirk, there will be two kernel devices. The first one is muted and the second device will report coordinates on X and Y. Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-24HID: hiddev: fix potential use-after-freeJiri Kosina
Commit 6cb4b040795 ("HID: hiddev: fix race between hiddev_disconnect and hiddev_release") made it possible to access hiddev (for unlocking the existance mutex) once hiddev has been kfreed. Change the order so that this can not happen (always unlock the mutex first, it is needed only to protect access to ->exist and ->open). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-23Merge branches 'doc', 'multitouch', 'upstream' and 'upstream-fixes' into ↵Jiri Kosina
for-linus
2011-05-20HID: hiddev: fix race between hiddev_disconnect and hiddev_releaseJiri Kosina
When hiddev_disconnect() runs with chardev open, it will proceed with usbhid_close(). When userspace in parallel runs the hiddev_release(), it sees !hiddev->exists (as it has been already set so by hiddev_disconnect()) and kfrees hiddev while hiddev_disconnect() hasn't finished yet. Serialize the access to hiddev->exists and hiddev->open by existancelock. Reported-by: mike-@cinci.rr.com Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-05-18Merge branch 'master' into upstream.Jiri Kosina
This is sync with Linus' tree to receive KEY_IMAGES definition that went in through input tree.
2011-05-18HID: 'name' and 'phys' in 'struct hid_device' can never be NULLDaniel Mack
As they are static members of fix size, there is no need to NULL-check them. Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-13 14:46:11 +0000