summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon
AgeCommit message (Collapse)Author
2011-07-03Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (k10temp) Update documentation for Fam12h hwmon-vid: Fix typo in VIA CPU name hwmon: (f71882fg) Add support for the F71869A hwmon: Use <> rather than () around my e-mail address hwmon: (emc6w201) Properly handle all errors
2011-07-03hwmon-vid: Fix typo in VIA CPU nameJean Delvare
It's Nehemiah, not Nemiah. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-03hwmon: (f71882fg) Add support for the F71869AHans de Goede
The F71869A is almost the same as the F71869F/E, except that it has the normal number of temp and pwm zones for a F71882FG derived chip, rather then the limited number of the F71869F/E. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Max Baldwin <archerseven@gmail.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-07-03hwmon: Use <> rather than () around my e-mail addressHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-07-03hwmon: (emc6w201) Properly handle all errorsJean Delvare
Handle errors on 8-bit register reads and writes too. Also use likely and unlikely to make the functions faster on success. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-01hwmon: (pmbus) Auto-detect temp2 and temp3 registers/attributesGuenter Roeck
Additional temperature attribute support is easy to detect, so do it. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com> Cc: stable.kernel.org # 2.6.39
2011-07-01hwmon: (pmbus) Improve fan detectionGuenter Roeck
Some PMBus devices return no error when reading fan speed registers, but don't really support fans. Strengthen fan detection by also checking if fan configuration registers exist. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com> Cc: stable.kernel.org # 2.6.39
2011-07-01hwmon: (adm1275) Free allocated memory if probe function failsGuenter Roeck
Probe function did not free allocated memory if it failed. Fix it. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-07-01hwmon: (pmbus) Drop check for PMBus revision register in probe functionGuenter Roeck
Some PMBus devices do not support the PMBus revision register, so don't check if it exists. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com> Cc: stable.kernel.org # 2.6.39
2011-06-17hwmon: (s3c) Initialize sysfs attributesGuenter Roeck
Initialize dynamically allocated sysfs attributes before device_create_file() call to suppress lockdep_init_map() warning if lockdep debugging is enabled. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org # 2.6.34+
2011-06-17hwmon: (ibmpex) Initialize sysfs attributesGuenter Roeck
Initialize dynamically allocated sysfs attributes before device_create_file() call to suppress lockdep_init_map() warning if lockdep debugging is enabled. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org # 2.6.34+
2011-06-17hwmon: (ibmaem) Initialize sysfs attributesGuenter Roeck
Initialize dynamically allocated sysfs attributes before device_create_file() call to suppress lockdep_init_map() warning if lockdep debugging is enabled. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: stable@kernel.org # 2.6.34+
2011-06-17hwmon: (asus_atk0110) Consolidate sysfs attribute initializationGuenter Roeck
Call sysfs_attr_init() from atk_init_attribute() to handle sysfs attribute initialization in a single function. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Luca Tettamanti <kronos.it@gmail.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2011-06-17hwmon: (coretemp) Drop unused struct membersJean Delvare
pdev_entry.cpu and pdev_entry.cpu_core_id aren't used anywhere in the driver code so we can drop these struct members. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-06-04hwmon: (max6642): Better chip detection schemaPer Dalén
Improve detection of MAX6642 by reading non existing registers (0x04, 0x06 and 0xff). Reading those registers returns the previously read value. Signed-off-by: Per Dalen <per.dalen@appeartv.com> [guenter.roeck@ericsson.com: added second set of register reads] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-06-01hwmon: (coretemp) Further relax temperature range checksGuenter Roeck
Further relax temperature range checks after reading the IA32_TEMPERATURE_TARGET register. If the register returns a value other than 0 in bits 16..32, assume that the returned value is correct. This change applies to both packet and core temperature limits. Cc: Carsten Emde <C.Emde@osadl.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Fenghua Yu <fenghua.yu@intel.com>
2011-06-01hwmon: (coretemp) Fix TjMax detection for older CPUsGuenter Roeck
Commit a321cedb12904114e2ba5041a3673ca24deb09c9 excludes CPU models 0xe, 0xf, 0x16, and 0x1a from TjMax temperature adjustment, even though several of those CPUs are known to have TiMax other than 100 degrees C, and even though the code in adjust_tjmax() explicitly handles those CPUs and points to a Web document listing several of the affected CPU IDs. Reinstate original TjMax adjustment if TjMax can not be determined using the IA32_TEMPERATURE_TARGET register. https://bugzilla.kernel.org/show_bug.cgi?id=32582 Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Huaxu Wan <huaxu.wan@linux.intel.com> Cc: Carsten Emde <C.Emde@osadl.org> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Yong Wang <yong.y.wang@linux.intel.com> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Fenghua Yu <fenghua.yu@intel.com> Tested-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jean Delvare <khali@linux-fr.org> Acked-by: Fenghua Yu <fenghua.yu@intel.com> Cc: <stable@kernel.org> # .35.x .36.x .37.x .38.x .39.x
2011-06-01hwmon: (coretemp) Relax target temperature range checkJean Delvare
The current temperature range check of MSR_IA32_TEMPERATURE_TARGET seems too strict to me, some TjMax values documented in Documentation/hwmon/coretemp wouldn't pass. Relax the check so that all the documented values pass. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Carsten Emde <C.Emde@osadl.org> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-06-01hwmon: (max6642) Rename temp_fault sysfs attribute to temp2_faultPer Dalen
The temp_fault sysfs attribute is wrong, it should be temp2_fault instead. Reported-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Per Dalen <per.dalen@appeartv.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-27hwmon: (coretemp) Fix section mismatchJean Delvare
chk_ucode_version() is only called from coretemp_probe() which is __devinit, so it can be marked __devinit too. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Durgadoss R <durgadoss.r@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-27hwmon: (pmbus) Initialize sysfs attributesGuenter Roeck
Initialize sysfs attrs before device_create_file() call to suppress lockdep_init_map() warning: WARNING: at kernel/lockdep.c:2701 lockdep_init_map+0x12d/0x140() Reviewed-by: Robert Coulson <robert.coulson@ericsson.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: stable@kernel.org # .39.x
2011-05-27hwmon: (coretemp) Update comments describing the handling of HT CPUsGuenter Roeck
Update comments describing the handling of HT CPUs based on review feedback. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2011-05-27hwmon: (coretemp) Initialize sysfs attributesSergey Senozhatsky
Initialize sysfs attrs before device_create_file() call to suppress lockdep_init_map() warning: [ 3.653628] WARNING: at kernel/lockdep.c:2885 lockdep_init_map+0xea/0x43c() [ 3.653698] Modules linked in: [ 3.654835] Pid: 1, comm: swapper Not tainted 2.6.39-dbg-git8-05624-g46187f8 #576 [ 3.656014] Call Trace: [ 3.657139] [<ffffffff8103e4b4>] warn_slowpath_common+0x7e/0x96 [ 3.658298] [<ffffffff8103e4e1>] warn_slowpath_null+0x15/0x17 [ 3.659460] [<ffffffff8106d7b9>] lockdep_init_map+0xea/0x43c [ 3.660616] [<ffffffff81163c1a>] sysfs_add_file_mode+0x5d/0xa8 [ 3.661785] [<ffffffff81163c71>] sysfs_add_file+0xc/0xe [ 3.662929] [<ffffffff81163d26>] sysfs_create_file+0x23/0x25 [ 3.664045] [<ffffffff813724d1>] device_create_file+0x14/0x16 [ 3.665172] [<ffffffff81460ed4>] coretemp_probe+0xf9/0x185 [ 3.666306] [<ffffffff8137638e>] platform_drv_probe+0x12/0x14 [ 3.667420] [<ffffffff81375321>] driver_probe_device+0xb0/0x14b [ 3.668542] [<ffffffff8137546d>] __device_attach+0x35/0x3a [ 3.669710] [<ffffffff81375438>] ? __driver_attach+0x7c/0x7c [ 3.670816] [<ffffffff8137426b>] bus_for_each_drv+0x54/0x88 [ 3.671921] [<ffffffff81375231>] device_attach+0x77/0x9b [ 3.673027] [<ffffffff81374aef>] bus_probe_device+0x22/0x39 [ 3.674137] [<ffffffff81373235>] device_add+0x3c1/0x550 [ 3.675249] [<ffffffff81371ed9>] ? dev_set_name+0x3c/0x3e [ 3.676371] [<ffffffff813769f3>] platform_device_add+0x10c/0x156 [ 3.677491] [<ffffffff8146af9c>] get_core_online+0xab/0x16e [ 3.678608] [<ffffffff81ad8070>] coretemp_init+0x4b/0x80 [ 3.679724] [<ffffffff81ad8025>] ? hwmon_init+0xee/0xee [ 3.680853] [<ffffffff8100020a>] do_one_initcall+0x7a/0x13c [ 3.681975] [<ffffffff81aaac74>] kernel_init+0xe1/0x15b [ 3.683081] [<ffffffff8147e4e4>] kernel_thread_helper+0x4/0x10 [ 3.684174] [<ffffffff8102d48c>] ? finish_task_switch+0x76/0xf0 [ 3.685266] [<ffffffff81477918>] ? retint_restore_args+0x13/0x13 [ 3.686356] [<ffffffff81aaab93>] ? start_kernel+0x3ee/0x3ee [ 3.687425] [<ffffffff8147e4e0>] ? gs_change+0x13/0x13 [ 3.688489] ---[ end trace 7392ad3e6a92ae39 ]--- Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-25hwmon: New driver for the SMSC EMC6W201Jean Delvare
This is a new driver for the SMSC EMC6W201 hardware monitoring device. The device is functionally close to the EMC6D100 series, but is register-incompatible. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Harry G McGavran Jr <w5pny@arrl.net> Tested-by: Jeff Rickman <jrickman@myamigos.us> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-25hwmon: (abituguru) Depend on DMIJean Delvare
The abituguru drivers are only built on X86, where DMI support is now enabled by default. So let these drivers depend on DMI, for the following gains: * Robustness and safety. Detection of these devices is weak and uses non-standard methods, it should really be limited to Abit boards unless the user explicitly asks otherwise. * Code simplicity. The code is easier to read without ifdefs. * Better build testing coverage. Now there's only one way to build the drivers, so no risk of build failure on exotic systems. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Alistair John Strachan <alistair@devzero.co.uk> Acked-by: Hans de Goede <hdegoede@redhat.com>
2011-05-25hwmon: (it87) Use request_muxed_regionNat Gurumoorthy
Serialize access to the hardware by using "request_muxed_region" macro defined by Alan Cox. Call to this macro will hold off the requestor if the resource is currently busy. "superio_enter" will return an error if call to "request_muxed_region" fails. Rest of the code change is to ripple an error return from superio_enter to the top level. Signed-off-by: Nat Gurumoorthy <natg@google.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-25hwmon: (sch5627) Trigger Vbat measurementsHans de Goede
The sch5627 needs to be explicitly told to start an adc conversion for Vbat, once in a while. Without this Vbat may read 0, and will never get updated. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-25hwmon: (sch5627) Add sch5627_send_cmd functionHans de Goede
This patch generalizes sch5627_read_virtual_reg so that it can be used to write virtual regs too. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Sigend-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-25hwmon: (max6650) Properly support the MAX6650Jean Delvare
The MAX6650 has only one fan input. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: "Hans J. Koch" <hjk@hansjkoch.de> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-25hwmon: (max6650) Drop device detectionJean Delvare
MAX6650 device detection is unreliable, we got reports of false positives. We now have many ways to let users instantiate the devices explicitly, so unreliable detection should be dropped. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: "Hans J. Koch" <hjk@hansjkoch.de> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-25Move ACPI power meter driver to hwmonJean Delvare
As discussed earlier, the ACPI power meter driver would better live in drivers/hwmon, as its only purpose is to create hwmon-style interfaces for ACPI 4.0 power meter devices. Users are more likely to look for it there, and less likely to accidentally hide it by unselecting its dependencies. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: "Darrick J. Wong" <djwong@us.ibm.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Len Brown <lenb@kernel.org>
2011-05-25hwmon: (f71882fg) Add support for F71808AHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-25hwmon: (f71882fg) Split has_beep in fan_has_beep and temp_has_beepHans de Goede
Needed for upcoming support of the F71808A. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-25hwmon: (asc7621) Drop duplicate dependencyJean Delvare
The config SENSORS_ASC7621 entry is inside an if HWMON / endif block, so it already depends on HWMON. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-25hwmon: (jc42) Change detection classJean Delvare
While the JC42-compatible chips are temperature sensors, I2C_CLASS_SPD makes more sense because these chips always live on memory modules. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-25hwmon: Add driver for AMD family 15h processor power informationAndreas Herrmann
This CPU family provides NB register values to gather following TDP information * ProcessorPwrWatts: Specifies in Watts the maximum amount of power the processor can support. * CurrPwrWatts: Specifies in Watts the current amount of power being consumed by the processor. This driver provides * power1_crit (ProcessorPwrWatts) * power1_input (CurrPwrWatts) Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-25hwmon: (k10temp) Add support for Fam15h (Bulldozer)Andre Przywara
AMDs upcoming CPUs use the same mechanism for the internal temperature reporting as the Fam10h CPUs, so we just needed to add the appropriate PCI-ID to the list. This allows to use the k10temp driver on those CPUs. While at it change the Kconfig entry to be more generic. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-25hwmon: Use helper functions to set and get driver dataJean Delvare
Use helper functions to set and get driver data. This is more elegant. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-23hwmon: (coretemp) Add comments describing the handling of HT CPUsGuenter Roeck
The coretemp driver provides a single set of device attributes for each physical core of a HT CPU to avoid duplicate sensors. This functionality was introduced with commit d883b9f09772 ("hwmon: (coretemp) Skip duplicate CPU entries"). Commit e40cc4bdfd4b ("x86/hwmon: register alternate sibling upon CPU removal") extends this functionality to register the HT sibling of a CPU which is taken offline, to ensure that sensor attributes are provided if at least one HT sibling of a core is online. Add comments into the code describing the functionality in some more detail. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-23hwmon: (coretemp) Fix compile error if CONFIG_SMP is not definedGuenter Roeck
cpu_sibling_mask() is not defined unless CONFIG_SMP is defined, so it must not be used directly in the code without ifdef protection. To solve the problem and avoid ifdefs in the code, define for_each_sibling() and use it instead. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-21hwmon: (coretemp) Fix checkpatch errorsGuenter Roeck
Fix remaining checkpatch errors in the coretemp driver. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2011-05-21hwmon: Remove pkgtemp driverGuenter Roeck
After the merge of pkgtemp functionality into the coretemp driver, the pkgtemp driver is no longer necessary. Remove it. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2011-05-20hwmon: (coretemp) Merge pkgtemp with coretempDurgadoss R
This patch merges the pkgtemp with coretemp driver. The sysfs interfaces for all cores in the same pkg are shown under one directory, in hwmon. It also supports CONFIG_HOTPLUG_CPU. So, the sysfs interfaces are created when each core comes online and are removed when it goes offline. Signed-off-by: Durgadoss R <durgadoss.r@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> [guenter.roeck@ericsson.com: Fixed section reference errors] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-19hwmon: (pmbus) Add support for Analog Devices ADM1275Guenter Roeck
Add support for Analog Devices ADM1275 Hot-Swap Controller and Digital Power Monitor Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19hwmon: (pmbus) Support for TI UCD90xxx series Sequencer and System Health ↵Guenter Roeck
Controllers Hardware monitoring support for TI UCD90120, UCD90124, UCD9090, and UCD90910 Sequencer and System Health Controllers. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19hwmon: (pmbus) Add support for TI UCD9200 series of PWM System ControllersGuenter Roeck
This patch adds hardware monitoring support for TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248 Digital PWM System Controllers. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19hwmon: (pmbus) Use device specific function to read fan configurationGuenter Roeck
Fan control implementation tends to be device specific, so start using the device specific function call to read fan configuration registers. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19hwmon: (pmbus) Expand scope of device specific get_status functionGuenter Roeck
Some devices use non-standard registers to access various functionality. This does not only affect status registers, but other registers as well. Rename local get_status function to get_byte_data to reflect this requirement. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19hwmon: (pmbus) Introduce infrastructure to detect sensors and limit registersGuenter Roeck
This commit replaces hard-coded sensor and limit register detection code with table based sensor detection. This change eliminates code block repetition and reduces code size. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19hwmon: Driver for MAX16065 System Manager and compatiblesGuenter Roeck
This patch adds hardware monitoring support for Maxim MAX16065, MAX16066, MAX16067, MAX16068, MAX16070, and MAX16071 flash-configurable system managers with nonvolatile fault registers. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Jean Delvare <khali@linux-fr.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-22 05:47:36 +0000