summaryrefslogtreecommitdiffstats
path: root/drivers/ide/ide-cd.c
AgeCommit message (Collapse)Author
2007-07-24[BLOCK] Get rid of request_queue_t typedefJens Axboe
Some of the code has been gradually transitioned to using the proper struct request_queue, but there's lots left. So do a full sweet of the kernel and get rid of this typedef and replace its uses with the proper type. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-09ide-cd: replace C code with call to ARRAY_SIZE() macroRobert P. J. Day
Delete the unnecessary macro ARY_LEN and use ARRAY_SIZE directly. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-10ide: move IDE settings handling to ide-proc.cBartlomiej Zolnierkiewicz
* move __ide_add_setting() ide_add_setting() __ide_remove_setting() auto_remove_settings() ide_find_setting_by_name() ide_read_setting() ide_write_setting() set_xfer_rate() ide_add_generic_settings() ide_register_subdriver() ide_unregister_subdriver() from ide.c to ide-proc.c * set_{io_32bit,pio_mode,using_dma}() cannot be marked static now, fix it * rename ide_[un]register_subdriver() to ide_proc_[un]register_driver(), update device drivers to use new names * add CONFIG_IDE_PROC_FS=n versions of ide_proc_[un]register_driver() and ide_add_generic_settings() * make ide_find_setting_by_name(), ide_{read,write}_setting() and ide_{add,remove}_proc_entries() static * cover IDE settings code in device drivers with CONFIG_IDE_PROC_FS #ifdef, also while at it cover with CONFIG_IDE_PROC_FS #ifdef ide_driver_t.proc * remove bogus comment from ide.h * cover with CONFIG_IDE_PROC_FS #ifdef .proc and .settings in ide_drive_t Besides saner code this patch results in the IDE core smaller by ~2 kB (on x86-32) and IDE disk driver by ~1 kB (ditto) when CONFIG_IDE_PROC_FS=n. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-10ide: split off ioctl handling from IDE settings (v2)Bartlomiej Zolnierkiewicz
* do write permission and min/max checks in ide_procset_t functions * ide-disk.c: drive->id is always available so cleanup "multcount" setting accordingly * ide-disk.c: "address" setting was incorrectly defined as type TYPE_INTA, fix it by using type TYPE_BYTE and updating ide_drive_t->adressing field, the bug didn't trigger because this IDE setting uses custom ->set function * ide.c: add set_ksettings() for handling HDIO_SET_KEEPSETTINGS ioctl * ide.c: add set_unmaskirq() for handling HDIO_SET_UNMASKINTR ioctl * handle ioctls directly in generic_ide_ioclt() and idedisk_ioctl() instead of using IDE settings to deal with them * remove no longer needed ide_find_setting_by_ioctl() and {read,write}_ioctl fields from ide_settings_t, also remove now unused TYPE_INTA handling v2: * add missing EXPORT_SYMBOL_GPL(ide_setting_sem) needed now for ide-disk Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-10ide: make /proc/ide/ optionalBartlomiej Zolnierkiewicz
All important information/features should be already available through sysfs and ioctl interfaces. Add CONFIG_IDE_PROC_FS (CONFIG_SCSI_PROC_FS rip-off) config option, disabling it makes IDE driver ~5 kB smaller (on x86-32). While at it add CONFIG_PROC_FS=n versions of proc_ide_{create,destroy}() and remove no longer needed #ifdefs. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-04-10ide: ugly messages trying to open CD drive with no media presentStuart Hayes
I get the following error messages when trying to open a CD device (specifically, the Teac CD-ROM CD-224E) that has no media present: hda: packet command error: status=3D0x51 { DriveReady SeekComplete Error } hda: packet command error: error=3D0x54 { AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown This happens when a "start stop unit" command (0x1b 0 0 0 3 0 0 0 0 0) is sent to the drive to try to close the CD-ROM tray, but this drive doesn't have that capability (it's a slim portable-type CD-ROM), so it reports sense key 5 (illegal request) with asc/ascq 24/0. This is exactly how SFF8090i says it should respond. But ide-cd.c (in cdrom_decode_status() ) just sees sense key 5 and spews out an error. It then goes on to request sense data, and cdrom_log_sense() understands this error and doesn't log it. The patch, for kernel 2.6.20.4, suppresses this error message. Signed-off-by: Stuart Hayes <stuart_hayes@dell.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-17ide: make ide_hwif_t.ide_dma_{host_off,off_quietly} void (v2)Bartlomiej Zolnierkiewicz
* since ide_hwif_t.ide_dma_{host_off,off_quietly} always return '0' make these functions void and while at it drop "ide_" prefix * fix comment for __ide_dma_off_quietly() * make __ide_dma_{host_off,off_quietly,off}() void and drop "__" prefix v2: * while at it rename atiixp_ide_dma_host_off() to atiixp_dma_host_off(), sgiioc4_ide_dma_{host_off,off_quietly}() to sgiioc4_dma_{host_off,off_quietly}() and sl82c105_ide_dma_off_quietly() to sl82c105_dma_off_quietly() [ Noticed by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-17ide: remove ide_drive_t.usageBartlomiej Zolnierkiewicz
This field is no longer used by the core IDE code so fix ide-{disk,floppy} drivers to keep openers count in the driver specific objects and remove it from ide-{cd,scsi,tape} drivers (it was write-only). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-17ide: remove write-only ide_hwif_t.no_dsc flagBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-17ide: remove clearing bmdma status from cdrom_decode_status() (rev #4)Albert Lee
patch 2/2: Remove clearing bmdma status from cdrom_decode_status() since ATA devices might need it as well. (http://lkml.org/lkml/2006/12/4/201 and http://lkml.org/lkml/2006/11/15/94) Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: "Adam W. Hawks" <awhawks@us.ibm.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-17ide: clear bmdma status in ide_intr() for ICHx controllers (revised #4)Albert Lee
patch 1/2 (revised): - Fix drive->waiting_for_dma to work with CDB-intr devices. - Do the dma status clearing in ide_intr() and add a new hwif->ide_dma_clear_irq for Intel ICHx controllers. Revised per Alan, Sergei and Bart's advice. Patch against 2.6.20-rc6. Tested ok on my ICH4 and pdc20275 adapters. Please review/apply, thanks. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: "Adam W. Hawks" <awhawks@us.ibm.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2006-12-10[PATCH] ide-cd: Handle strange interrupt on the Intel ESB2Alan Cox
The ESB2 appears to emit spurious DMA interrupts when configured for native mode and handling ATAPI devices. Stratus were able to pin this bug down and produce a patch. This is a rework which applies the fixup only to the ESB2 (for now). We can apply it to other chips later if the same problem is found. This code has been tested and confirmed to fix the problem on the tested systems. Signed-off-by: Alan Cox <alan@redhat.com> (Most of the hard work done by Stratus however) Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-13[PATCH] ide-cd: only set rq->errors SCSI style for block pc requestsJens Axboe
We should only set ->errors to CHECK_CONDITION and so on for requests that use this field in the SCSI manner. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-12[PATCH] ide-cd: one more missing REQ_TYPE_CMD_ATA checkJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2006-10-12[PATCH] ide-cd: fix breakage with internally queued commandsJens Axboe
We still need to maintain a private PC style command, since it isn't completely unified with REQ_TYPE_BLOCK_PC yet. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2006-09-30[PATCH] Split struct request ->flags into two partsJens Axboe
Right now ->flags is a bit of a mess: some are request types, and others are just modifiers. Clean this up by splitting it into ->cmd_type and ->cmd_flags. This allows introduction of generic Linux block message types, useful for sending generic Linux commands to block devices. Signed-off-by: Jens Axboe <axboe@suse.de>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-26[PATCH] devfs: Remove devfs support from the ide subsystem.Greg Kroah-Hartman
Also removes the ide drive devfs_name field as it's no longer needed Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-25[PATCH] IDE CD end-of media error fixAlan Cox
This is a patch from Alan that fixes a real ide-cd.c regression causing bogus "Media Check" failures for perfectly valid Fedora install ISOs, on certain CD-ROM drives. This is a forward port to 2.6.16 (from RHEL) of the minimal changes for the end of media problem. It may not be sufficient for some controllers (promise notably) and it does not touch the locking so the error path locking is as horked as in mainstream. From: Ingo Molnar <mingo@elte.hu> I have ported the patch to 2.6.17-rc4 and tested it by provoking end-of-media IO errors with an unaligned ISO image. Unlike the vanilla kernel, the patched kernel interpreted the error condition correctly with 512 byte granularity: hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown ATAPI device hdc: Error: Illegal request -- (Sense key=0x05) Illegal mode for this track or incompatible medium -- (asc=0x64, ascq=0x00) The failed "Read 10" packet command was: "28 00 00 04 fb 78 00 00 06 00 00 00 00 00 00 00 " end_request: I/O error, dev hdc, sector 1306080 Buffer I/O error on device hdc, logical block 163260 Buffer I/O error on device hdc, logical block 163261 Buffer I/O error on device hdc, logical block 163262 the unpatched kernel produces an incorrect error dump: hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown end_request: I/O error, dev hdc, sector 1306080 Buffer I/O error on device hdc, logical block 163260 hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown end_request: I/O error, dev hdc, sector 1306088 Buffer I/O error on device hdc, logical block 163261 hdc: command error: status=0x51 { DriveReady SeekComplete Error } hdc: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown end_request: I/O error, dev hdc, sector 1306096 Buffer I/O error on device hdc, logical block 163262 I do not have the right type of CD-ROM drive to reproduce the end-of-media data corruption bug myself, but this same patch in RHEL solved it. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Jens Axboe <axboe@suse.de> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] More BUG_ON conversionEric Sesterhenn
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] Fix cdrom being confused on using kdumpRachita Kothiyal
I have seen the cdrom drive appearing confused on using kdump on certain x86_64 systems. During the booting up of the second kernel, the following message would keep flooding the console, and the booting would not proceed any further. hda: cdrom_pc_intr: The drive appears confused (ireason = 0x01) In this patch, whenever we are hitting a confused state in the interrupt handler with the DRQ set, we end the request and return ide_stopped. Using this I dont see the status error. Signed-off-by: Rachita Kothiyal <rachita@in.ibm.com> Acked-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27[PATCH] ide-cd: quiet down GPCMD_READ_CDVD_CAPACITY failureJens Axboe
Some drives like to throw a: ATAPI device hdc: Error: Not ready -- (Sense key=0x02) Incompatible medium installed -- (asc=0x30, ascq=0x00) The failed "Read Cd/Dvd Capacity" packet command was: "25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 " warning on incompatible media, so quiet down this error. Signed-off-by: Jens Axboe <axboe@suse.de>
2006-03-23[PATCH] sem2mutex: drivers/ideArjan van de Ven
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23[PATCH] kill cdrom ->dev_ioctl methodChristoph Hellwig
Since early 2.4.x all cdrom drivers implement the block_device methods themselves, so they can handle additional ioctls directly instead of going through the cdrom layer. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14[PATCH] Unlinline a bunch of other functionsArjan van de Ven
Remove the "inline" keyword from a bunch of big functions in the kernel with the goal of shrinking it by 30kb to 40kb Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-13[PATCH] Add ide_bus_type probe and remove methodsRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-10[PATCH] ide-cd: clear random-write capability it not supportedAndrey Borzenkov
Add CDC-RAM to capability mask. This prevents udev incorrectly reporting RAM capabilities for device. Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-09[BLOCK] Kill blk_attempt_remerge()Jens Axboe
It's a broken interface, it's done way too late. And apparently it triggers slab problems in recent kernels as well (most likely after the generic dispatch code was merged). So kill it, ide-cd is the only user of it. Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-06[BLOCK] add @uptodate to end_that_request_last() and @error to rq_end_io_fn()Tejun Heo
add @uptodate argument to end_that_request_last() and @error to rq_end_io_fn(). there's no generic way to pass error code to request completion function, making generic error handling of non-fs request difficult (rq->errors is driver-specific and each driver uses it differently). this patch adds @uptodate to end_that_request_last() and @error to rq_end_io_fn(). for fs requests, this doesn't really matter, so just using the same uptodate argument used in the last call to end_that_request_first() should suffice. imho, this can also help the generic command-carrying request jens is working on. Signed-off-by: tejun heo <htejun@gmail.com> Signed-Off-By: Jens Axboe <axboe@suse.de>
2006-01-04[PATCH] ide: MODALIAS support for autoloading of ide-cd, ide-disk, ...Kay Sievers
IDE: MODALIAS support for autoloading of ide-cd, ide-disk, ... Add MODULE_ALIAS to IDE midlayer modules: ide-disk, ide-cd, ide-floppy and ide-tape, to autoload these modules depending on the probed media type of the IDE device. It is used by udev and replaces the former agent shell script of the hotplug package, which was required to lookup the media type in the proc filesystem. Using proc was racy, cause the media file is created after the hotplug event is sent out. The module autoloading does not take any effect, until something like the following udev rule is configured: SUBSYSTEM=="ide", ACTION=="add", ENV{MODALIAS}=="?*", RUN+="/sbin/modprobe $env{MODALIAS}" The module ide-scsi will not be autoloaded, cause it requires manual configuration. It can't be, and never was supported for automatic setup in the hotplug package. Adding a MODULE_ALIAS to ide-scsi for all supported media types, would just lead to a default blacklist entry anyway. $ modinfo ide-disk filename: /lib/modules/2.6.15-rc4-g1b0997f5/kernel/drivers/ide/ide-disk.ko description: ATA DISK Driver alias: ide:*m-disk* license: GPL ... $ modprobe -vn ide:m-disk insmod /lib/modules/2.6.15-rc4-g1b0997f5/kernel/drivers/ide/ide-disk.ko $ cat /sys/bus/ide/devices/0.0/modalias ide:m-disk It also adds attributes to the IDE device: $ tree /sys/bus/ide/devices/0.0/ /sys/bus/ide/devices/0.0/ |-- bus -> ../../../../../../../bus/ide |-- drivename |-- media |-- modalias |-- power | |-- state | `-- wakeup `-- uevent $ cat /sys/bus/ide/devices/0.0/{modalias,drivename,media} ide:m-disk hda disk Signed-off-by: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-12-15[PATCH] ide-cd: remove write-only cmd field from struct cdrom_infoBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-19[PATCH] ide: add missing __init tags to device driversBartlomiej Zolnierkiewicz
Also remove bogus comments for idefloppy_init() and idetape_init(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-18[PATCH] ide: remove ide_driver_t.owner fieldLaurent Riffard
The structure ide_driver_t have a .owner field which is a duplicate of .gendriver.owner field (.gen_driver is a struct device_driver). This patch removes ide_driver_t's owner field. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-07[PATCH] kfree cleanup: misc remaining driversJesper Juhl
This is the remaining misc drivers/ part of the big kfree cleanup patch. Remove pointless checks for NULL prior to calling kfree() in misc files in drivers/. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org> Acked-by: Roland Dreier <rolandd@cisco.com> Acked-by: Pierre Ossman <drzeus@drzeus.cx> Acked-by: Jean Delvare <khali@linux-fr.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Len Brown <len.brown@intel.com> Acked-by: "Antonino A. Daplas" <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] ide: kmalloc + memset -> kzalloc conversionDeepak Saxena
Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] ide-cd mini cleanup of castsJesper Juhl
Remove some unneeded casts. Avoid an assignment in the case of kmalloc failure. Break a few instances of if (foo) whatever; into two lines. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] protect ide_cdrom_capacity by ifdefAmos Waterland
The only call to ide_cdrom_capacity is in code protected by CONFIG_PROC_FS, so when that is not enabled, the compiler complains: drivers/ide/ide-cd.c:3259: warning: `ide_cdrom_capacity' defined but not used Here is a patch that fixes that. It provides some space savings for embedded systems that are not using procfs, as well: text data bss dec hex filename - 33540 6504 1032 41076 a074 drivers/ide/ide-cd.o + 33468 6480 1032 40980 a014 drivers/ide/ide-cd.o Signed-off-by: Amos Waterland <apw@us.ibm.com> Cc: Jens Axboe <axboe@suse.de> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-12[PATCH] quiet ide-cd warningMatt Mackall
This shuts up a potential uninitialized variable warning. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23[PATCH] IDE CD reports current speedEric Piel
The current ide-cd driver reports the CDROM speed (as found in /proc/sys/dev/cdrom/info) as the current speed when loading the driver. Changing the speed of the cdrom drive (by "eject -x" for instance) doesn't update the speed reported by the kernel. Updating the info could be valuable for the user as it's the only way to know if the drive accepted the request or discarded it. It could even be used to list all the available speeds of the drive. The attached patch modifies the ide-cd driver so that after every speed change request the new speed is updated. Please note that the actual modification is very little but I had to touch quite a few lines in order to avoid to pre-declare the sub-functions. Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Acked-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-31[PATCH] Relax idecd dma alignment checkJens Axboe
Only the address needs alignment of mask bits, length should work with a relaxed alignment check. Signed-off-by: Jens Axboe <axboe@suse.de> [ This is take 2: make the length check be for 16-byte alignment, not just word alignment. That should hopefully keep everybody happy, while still allowing CD writing with DMA ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-27ide-cd: revert DMA mask test changeLinus Torvalds
The change to require the DMA length to be only word-aligned was not safe.
2005-05-26[PATCH] convert IDE device drivers to driver-modelBartlomiej Zolnierkiewicz
* add ide_bus_match() and export ide_bus_type * split ide_remove_driver_from_hwgroup() out of ide_unregister() * move device cleanup from ide_unregister() to drive_release_dev() * convert ide_driver_t->name to driver->name * convert ide_driver_t->{attach,cleanup} to driver->{probe,remove} * remove ide_driver_t->busy as ide_bus_type->subsys.rwsem protects against concurrent ->{probe,remove} calls * make ide_{un}register_driver() void as it cannot fail now * use driver_{un}register() directly, remove ide_{un}register_driver() * use device_register() instead of ata_attach(), remove ata_attach() * add proc_print_driver() and ide_drivers_show(), remove ide_drivers_op * fix ide_replace_subdriver() and move it to ide-proc.c * remove ide_driver_t->drives, ide_drives and drives_lock * remove ide_driver_t->drivers, drivers and drivers_lock * remove ide_drive_t->driver and DRIVER() macro Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
2005-05-25[PATCH] relax ide-cd dma restrictionsJens Axboe
This has been sitting for a while, and is causing lots of grief for people burning CDs. It relaxes the dma restriction for ide-cd, requiring only the length to be 32-byte aligned, address should be fine at normal double word alignment. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!