summaryrefslogtreecommitdiffstats
path: root/drivers/ide/pdc202xx_old.c
AgeCommit message (Collapse)Author
2010-04-22pdc202xx_old: ignore "FIFO empty" bit in test_irq() methodSergei Shtylyov
The driver takes into account not only the interrupt status bit but also "FIFO empty" bit in its test_irq() method. This actually is a superfluous check since for the DMA commands calling the dma_test_irq() method further in the interrupt handler makes sure FIFO is emptied. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22pdc202xx_old: wire test_irq() method for PDC2026xSergei Shtylyov
In the commit e0321fbe6d34b4bb514fb6daff9e0859e5d76001 (pdc202xx_old: implement test_irq() method (take 2)) I forgot to modify 'pdc2026x_port_ops'... :-/ Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-02Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/ide-2.6
2010-01-19ide: change ->set_dma_mode method parametersBartlomiej Zolnierkiewicz
Change ->set_dma_mode method parameters to match ->set_dmamode method used in struct ata_port_operations. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2010-01-19ide: change ->set_pio_mode method parametersBartlomiej Zolnierkiewicz
Change ->set_pio_mode method parameters to match ->set_piomode method used in struct ata_port_operations. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19pdc202xx_old: add ->init_hwif methodBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-12ide: Fix Promise UDMA33 IDE driver (pdc202xx_old)Russell King
On Sun, Jan 03, 2010 at 12:23:14AM +0000, Russell King wrote: > - with IDE > - locks the interrupt line, and makes the machine extremely painful - > about an hour to get to the point of being able to unload the > pdc202xx_old module. Having manually bisected kernel versions, I've narrowed it down to some change between 2.6.30 and 2.6.31. There's not much which has changed between the two kernels, but one change stands out like a sore thumb: +static int pdc202xx_test_irq(ide_hwif_t *hwif) +{ + struct pci_dev *dev = to_pci_dev(hwif->dev); + unsigned long high_16 = pci_resource_start(dev, 4); + u8 sc1d = inb(high_16 + 0x1d); + + if (hwif->channel) { + /* + * bit 7: error, bit 6: interrupting, + * bit 5: FIFO full, bit 4: FIFO empty + */ + return ((sc1d & 0x50) == 0x40) ? 1 : 0; + } else { + /* + * bit 3: error, bit 2: interrupting, + * bit 1: FIFO full, bit 0: FIFO empty + */ + return ((sc1d & 0x05) == 0x04) ? 1 : 0; + } +} Reading the (documented as a 32-bit) system control register when the interface is idle gives: 0x01da110c So, the byte at 0x1d is 0x11, which is documented as meaning that the primary and secondary FIFOs are empty. The code above, which is trying to see whether an IRQ is pending, checks for the IRQ bit to be one, and the FIFO bit to be zero - or in English, to be non-empty. Since during a BM-DMA read, the FIFOs will naturally be drained to the PCI bus, the chance of us getting to the interface before this happens are extremely small - and if we don't, it means we decide not to service the interrupt. Hence, the screaming interrupt problem with drivers/ide. Fix this by only indicating an interrupt is ready if both the interrupt and FIFO empty bits are at '1'. This bug only affects PDC20246/PDC20247 (Promise Ultra33) based cards, and has been tested on 2.6.31 and 2.6.33-rc2. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03pdc202xx_old: remove no longer needed debugging codeBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15pdc202xx_old: implement test_irq() method (take 2)Sergei Shtylyov
Implement test_irq() method based on the driver's former dma_test_irq() method. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-15ide: IORDY handling fixesBartlomiej Zolnierkiewicz
Add ide_pio_need_iordy() helper and convert host drivers to use it. This fixes it8172, it8213, pdc202xx_old, piix, slc90e66 and siimage host drivers to handle IORDY correctly. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-12Merge branch 'for-2.6.31' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 * 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (29 commits) ide: re-implement ide_pci_init_one() on top of ide_pci_init_two() ide: unexport ide_find_dma_mode() ide: fix PowerMac bootup oops ide: skip probe if there are no devices on the port (v2) sl82c105: add printk() logging facility ide-tape: fix proc warning ide: add IDE_DFLAG_NIEN_QUIRK device flag ide: respect quirk_drives[] list on all controllers hpt366: enable all quirks for devices on quirk_drives[] list hpt366: sync quirk_drives[] list with pdc202xx_{new,old}.c ide: remove superfluous SELECT_MASK() call from do_rw_taskfile() ide: remove superfluous SELECT_MASK() call from ide_driveid_update() icside: remove superfluous ->maskproc method ide-tape: fix IDE_AFLAG_* atomic accesses ide-tape: change IDE_AFLAG_IGNORE_DSC non-atomically pdc202xx_old: kill resetproc() method pdc202xx_old: don't call pdc202xx_reset() on IRQ timeout pdc202xx_old: use ide_dma_test_irq() ide: preserve Host Protected Area by default (v2) ide-gd: implement block device ->set_capacity method (v2) ...
2009-06-11Merge branch 'for-2.6.31' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.31' of git://git.kernel.dk/linux-2.6-block: (153 commits) block: add request clone interface (v2) floppy: fix hibernation ramdisk: remove long-deprecated "ramdisk=" boot-time parameter fs/bio.c: add missing __user annotation block: prevent possible io_context->refcount overflow Add serial number support for virtio_blk, V4a block: Add missing bounce_pfn stacking and fix comments Revert "block: Fix bounce limit setting in DM" cciss: decode unit attention in SCSI error handling code cciss: Remove no longer needed sendcmd reject processing code cciss: change SCSI error handling routines to work with interrupts enabled. cciss: separate error processing and command retrying code in sendcmd_withirq_core() cciss: factor out fix target status processing code from sendcmd functions cciss: simplify interface of sendcmd() and sendcmd_withirq() cciss: factor out core of sendcmd_withirq() for use by SCSI error handling code cciss: Use schedule_timeout_uninterruptible in SCSI error handling code block: needs to set the residual length of a bidi request Revert "block: implement blkdev_readpages" block: Fix bounce limit setting in DM Removed reference to non-existing file Documentation/PCI/PCI-DMA-mapping.txt ... Manually fix conflicts with tracing updates in: block/blk-sysfs.c drivers/ide/ide-atapi.c drivers/ide/ide-cd.c drivers/ide/ide-floppy.c drivers/ide/ide-tape.c include/trace/events/block.h kernel/trace/blktrace.c
2009-06-07ide: respect quirk_drives[] list on all controllersBartlomiej Zolnierkiewicz
* Add ide_check_nien_quirk_list() helper to the core code and then use it in ide_port_tune_devices(). * Remove no longer needed ->quirkproc methods from hpt366.c and pdc202xx_{new,old}.c. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07pdc202xx_old: kill resetproc() methodSergei Shtylyov
The driver's resetproc() method resets both channels at once -- most probably by driving RESET- on them. Not only such reset can severely disturb concurrent operations on another channel, it also ensues 2-second delay, while there's no apparent reason why SRST reset being performed prior to resetproc() call needs to be followed up by another reset. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07pdc202xx_old: don't call pdc202xx_reset() on IRQ timeoutSergei Shtylyov
The driver's dma_lost_irq() and dma_clear() methods call pdc202xx_reset() which resets both channels at once -- most probably by driving RESET- on them. Not only such reset can severely disturb concurrent operations on another channel, it is also a clear overkill (especially in the first case) and is completely unexpected and thus not properly handled by the IDE core in this context (in the second case the usual SRST reset would most probably ensue anyway though); it also causes quite arbitrary 2-second delay. Hence, use the standard ide_dma_lost_irq() method and don't install the optional dma_clear() method at all -- the driver should do well without this age-old cruft... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07pdc202xx_old: use ide_dma_test_irq()Sergei Shtylyov
The driver's dma_test_irq() method, although tests some chip specific interrupt bits, finally always relies on the SFF-8038i standard interrupt bit. I see no point in testing the bits that are not trusted anyway -- the driver should be fully able to use the standard method implemetation, ide_dma_test_irq(). With this change 'pdc202xx_dma_ops' finally becomes identical to 'sff_dma_ops', and we can get rid of it... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07pdc202xx_old: fix resetproc() methodSergei Shtylyov
pdc202xx_reset() calls pdc202xx_reset_host() twice, for both channels, while that function actually twiddles the single, shared software reset bit -- the net effect is a duplicated reset and horrendous 4 second delay happening not only on a channel reset but also when dma_lost_irq() and dma_clear() methods are called. Fold pdc202xx_reset_host() into pdc202xx_reset(), fix printk(), and move it before the actual reset... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-06-07pdc202xx_old: fix 'pdc20246_dma_ops'Sergei Shtylyov
Commit ac95beedf8bc97b24f9540d4da9952f07221c023 (ide: add struct ide_port_ops (take 2)) erroneously converted the driver's dma_timeout() and dma_lost_irq() methods to call the driver's resetproc() method regardless of whether it was defined for this specific controller while it hadn't been defined and hence called for PDC20246. So the dma_clear() method, the successor of dma_timeout(), shouldn't exist and the dma_lost_irq() method should be standard for PDC20246. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-11ide: convert to rq pos and nr_sectors accessorsTejun Heo
ide doesn't manipulate request fields anymore and thus all hard and their soft equivalents are always equal. Convert all references to accessors. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-03-31ide: add ->dma_clear method and remove ->dma_timeout oneBartlomiej Zolnierkiewicz
All custom ->dma_timeout implementations call the generic one thus it is possible to have only an optional method for resetting DMA engine instead: * Add ->dma_clear method and convert hpt366, pdc202xx_old and sl82c105 host drivers to use it. * Always use ide_dma_timeout() in ide_dma_timeout_retry() and remove ->dma_timeout method. * Make ide_dma_timeout() static. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27ide: add ->dma_timer_expiry method and remove ->dma_exec_cmd one (v2)Bartlomiej Zolnierkiewicz
* Rename dma_timer_expiry() to ide_dma_sff_timer_expiry() and export it. * Add ->dma_timer_expiry method and use it to set hwif->expiry for ATA_PROT_DMA protocol in do_rw_taskfile(). * Initialize ->dma_timer_expiry to ide_dma_sff_timer_expiry() for SFF hosts. * Move setting hwif->expiry from ide_execute_command() to its users and drop 'expiry' argument. * Use ide_execute_command() instead of ->dma_exec_cmd in do_rw_taskfile(). * Remove ->dma_exec_cmd method and its implementations. * Unexport ide_execute_command() and ide_dma_intr(). v2: * Fix CONFIG_BLK_DEV_IDEDMA=n build (noticed by Randy Dunlap). * Fix *dma_expiry naming (suggested by Sergei Shtylyov). There should be no functional changes caused by this patch. Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-24ide: fix ->init_chipset method to return 'int' valueBartlomiej Zolnierkiewicz
* Return 0 instead of dev->irq in ->init_chipset implementations. * Fix ->init_chipset method to return 'int' value instead of 'unsigned int' one. This fixes ->init_chipset handling for host drivers (cs5530, hpt366 and pdc202xx_new) for which it is possible for this method to fail. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: move read_sff_dma_status() method to 'struct ide_dma_ops'Sergei Shtylyov
Move apparently misplaced read_sff_dma_status() method from 'struct ide_tp_ops' to 'struct ide_dma_ops', renaming it to dma_sff_read_status() and making only required for SFF-8038i compatible IDE controller drivers (greatly cutting down the number of initializers) as its only user (outside ide-dma-sff.c and such drivers) appears to be ide_pci_check_simplex() which is only called for such controllers... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: remove HWIF() macroBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: merge ide_hwgroup_t with ide_hwif_t (v2)Bartlomiej Zolnierkiewicz
* Merge ide_hwgroup_t with ide_hwif_t. * Cleanup init_irq() accordingly, then remove no longer needed ide_remove_port_from_hwgroup() and ide_ports[]. * Remove now unused HWGROUP() macro. While at it: * ide_dump_ata_error() fixups v2: * Fix ->quirk_list check in do_ide_request() (s/hwif->cur_dev/prev_port->cur_dev). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-29ide: add ->max_sectors field to struct ide_port_infoBartlomiej Zolnierkiewicz
* Add ->max_sectors field to struct ide_port_info to allow host drivers to specify value used for hwif->rqsize (if smaller than the default). * Convert pdc202xx_old to use ->max_sectors and remove no longer needed IDE_HFLAG_RQSIZE_256 flag. There should be no functional changes caused by this patch. Acked-by: Sergei Shtyltov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-21ide: remove useless subdirs from drivers/ide/Bartlomiej Zolnierkiewicz
Suggested-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>