summaryrefslogtreecommitdiffstats
path: root/drivers/ide
AgeCommit message (Collapse)Author
2009-02-03Fix my email address in qd65xx.[ch]/pata_qdi.cSamuel Thibault
The @fnac.net will be shut down within a couple of months, so fix my email address. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-02icside: fix PCB version 6 support (v2)Bartlomiej Zolnierkiewicz
We need to pass struct ide_port_info also to ide_host_register(). v2: Fix v5/v6 mismatch noticed by Russell. Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-02-02tx4939ide: typo fix and minor cleanupAtsushi Nemoto
The bcount is greater than 0 and less than or equal to 0x10000. Thus '(bcount & 0xffff) == 0x0000' can be simplified as 'bcount == 0x10000'. Suggested-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-02-02ide: add CS5536 host driver (v3)Bartlomiej Zolnierkiewicz
This is a port of libata's pata_cs5536.c (written by Martin K. Petersen) to IDE subsystem. Changes done while at it: * Reprogram PIO/MWDMA timings if needed before and after DMA transfer (chipset uses shared PIO/MWDMA timings). * Fix cable detection to report 80-wires cable if BIOS set it for any device on a port (IDE core will do drive-side cable detection later). * Don't disable UDMA while programming PIO timings. * Simplify PCI/MSR support. Pros of having IDE host driver in addition to libata's one: * IDE is much lighter than SCSI+libata, the host driver itself is also a bit smaller: text data bss dec hex filename 1261 496 4 1761 6e1 drivers/ata/pata_cs5536.o 1242 128 4 1374 55e drivers/ide/cs5536.o * This allows use of IDE features which are unavailable under libata. v2: * Fixes per review from Sergei: - simplify dependency check in Kconfig - use IDE_DRV_MASK also for ->drive_data - disable UDMA when programming MWDMA - program new DTC timings only when necessary - fix printk() level in cs5536_init_one() * Fix patch description according to comments from Alan and Sergei. v3: * Smarter masking of UDMA bits per Sergei's suggestion. Cc: Martin K. Petersen <mkp@mkp.net> Cc: Karl Auerbach <karl@iwl.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-02-02ide: Force VIA IDE legacy interrupts for AmigaOne boardsGerhard Pircher
The AmigaOne uses the onboard VIA IDE controller in legacy mode (like the Pegasos). Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net> Cc: "Grant Likely" <grant.likely@secretlab.ca> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-02-02IDE: Unregister and disable devices if initialization fails.Ian Campbell
On reboot the loop in device_shutdown gets confused by these partially initialized devices and goes into an infinite loop. Therefore unregister and disable these devices. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> [bart: remove leftover hwif->present clearing + update patch description] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-02-02ide: fix ide_register_port() failure handlingBartlomiej Zolnierkiewicz
* Factor out port freeing from ide_host_free() to ide_free_port(). * Add ide_disable_port() and use it on ide_register_port() failure. Cc: Ian Campbell <Ian.Campbell@citrix.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-02-02ide: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: linux-ide@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-02-02ide-cd: fix DMA for non bio-backed requestsBorislav Petkov
This one fixes http://bugzilla.kernel.org/show_bug.cgi?id=12320. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-19drivers/ide/palm_bk3710.c buildfixDavid Brownell
CC drivers/ide/palm_bk3710.o drivers/ide/palm_bk3710.c: In function 'palm_bk3710_probe': drivers/ide/palm_bk3710.c:382: warning: assignment makes integer from pointer without a cast Someone should fix hw_regs_t to neither be a typedef, nor use "unsigned long" where it should use "void __iomem *". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-19ide: fix Falcon IDE breakageMichael Schmitz
[m68k] Falcon IDE: always serialize, in order to force execution of ide_get_lock() and friends. Signed-off-By: Michael Schmitz <schmitz@debian.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> [bart: set flag in falconide_port_info instead of falconide_init()] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-19ide: fix IDE PMAC breakageAndreas Schwab
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> writes: > Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> > --- > drivers/ide/ide-probe.c | 9 ++------- > 1 file changed, 2 insertions(+), 7 deletions(-) > > Index: b/drivers/ide/ide-probe.c > =================================================================== > --- a/drivers/ide/ide-probe.c > +++ b/drivers/ide/ide-probe.c > @@ -640,14 +640,9 @@ static int ide_register_port(ide_hwif_t > /* register with global device tree */ > dev_set_name(&hwif->gendev, hwif->name); > hwif->gendev.driver_data = hwif; > - if (hwif->gendev.parent == NULL) { > - if (hwif->dev) > - hwif->gendev.parent = hwif->dev; > - else > - /* Would like to do = &device_legacy */ > - hwif->gendev.parent = NULL; > - } > + hwif->gendev.parent = hwif->dev; This [bart: commit 96d40941236722777c259775640b8880b7dc6f33 ("ide: small ide_register_port() cleanup")] breaks ide-pmac. It overwrites the parent that pmac_ide_macio_attach has set. Signed-off-by: Andreas Schwab <schwab@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-14ide: fix suspend regressionBartlomiej Zolnierkiewicz
On Monday 12 January 2009, Simon Holm Thøgersen wrote: > commit 295f000 ("ide: don't execute the next queued command from the > hard-IRQ context (v2)") breaks suspend to disk for me. On > 'echo disk > /sys/power/state' the systems hangs, letting me switch > virtual consoles, but not responding to Alt+SysRq Restart the request queue early for REQ_TYPE_PM_RESUME requests (though there is only one resume request for the whole resume sequence it stays in the queue until is fully completed and now depends on kblockd for processing consequential resume states). Reported-and-bisected-by: Simon Holm Thøgersen <odie@cs.aau.dk> Tested-by: Simon Holm Thøgersen <odie@cs.aau.dk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-14tx4938ide: Fix build error due to read_sff_dma_status movingAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-14ide: remove unused CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-14sl82c105: remove dead codeBartlomiej Zolnierkiewicz
CONFIG_LOPEC and CONFIG_SANDPOINT config options are gone. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-14via82cxxx: fix cable warning messageBartlomiej Zolnierkiewicz
Remove reference to the removed old-style kernel parameter. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-14ide: can't use SSD/non-rotational queue flag for all CFA devicesBartlomiej Zolnierkiewicz
Some rotating disks also present themselves as CFA devices. Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-14it821x.c: use dev->revision instead of pci_read_config_byteBrandon Philips
Minor cleanup. Signed-off-by: Brandon Philips <bphilips@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Shawn Lin <shawn@dmp.com.tw> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-14it821x: Add ultra_mask quirk for Vortex86SXBrandon Philips
On Vortex86SX with IDE controller revision 0x11 ultra DMA must be disabled. This patch was tested by DMP and seems to work. It is a cleaned up version of their older Kernel patch: http://www.dmp.com.tw/tech/vortex86sx/patch-2.6.24-DMP.gz Tested-by: Shawn Lin <shawn@dmp.com.tw> Signed-off-by: Brandon Philips <bphilips@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-14ide: fix accidental LOCKDEP breakage caused by local_irq_set() removalBartlomiej Zolnierkiewicz
commit 54cc1428cfa619e16d75baae8cb041a2eff015f0 ("ide: remove local_irq_set() macro") accidentally replaced local_save_flags() by local_irq_set() in ide_probe_port() and __ide_wait_stat() which resulted in LOCKDEP breakage. Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-09Merge branch 'linus' into releaseLen Brown
2009-01-06scc_pata: make use of scc_dma_sff_read_status()Sergei Shtylyov
Make consistent use of scc_dma_sff_read_status() throughout the driver. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide-dma-sff: factor out ide_dma_sff_write_status()Sergei Shtylyov
Factor out ide_dma_sff_write_status(), symmetric to ide_dma_sff_read_status(). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: move read_sff_dma_status() method to 'struct ide_dma_ops'Sergei Shtylyov
Move apparently misplaced read_sff_dma_status() method from 'struct ide_tp_ops' to 'struct ide_dma_ops', renaming it to dma_sff_read_status() and making only required for SFF-8038i compatible IDE controller drivers (greatly cutting down the number of initializers) as its only user (outside ide-dma-sff.c and such drivers) appears to be ide_pci_check_simplex() which is only called for such controllers... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: don't set hwif->dma_ops in init_dma() methodSergei Shtylyov
Replace setting of 'hwif->dma_ops' in the 'alim15x3' and 'palm_bk3710' drivers' init_dma() methods with initializing the corresponding member of their 'struct ide_port_info' instances and remove such setting from the 'hpt366' driver that just doesn't use 'sff_dma_ops'. Along with some code save, this prepares us for the next patch... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06Resurrect IT8172 IDE controller driverShane McDonald
Support for the IT8172 IDE controller was removed from the kernel sometime after 2.6.18. Support for the only boards that used the IT8172 was removed from the kernel after 2.6.18, as they had never compiled since 2.6.0. However, there are a couple of platforms that use this chip: the PMC-Sierra Xiao Hu thin-client computer, which is no longer in production, and the Linksys NSS4000 Network Attached Storage box, which is based on the Xiao Hu board. I am attempting to add support for the Xiao Hu to the kernel, and this IT8172 IDE controller is the first bit of code in this effort. This patch resurrects the IT8172 IDE controller code. I began with the 2.6.18 version of the it8172.c file, and have moved it forward so that it works with the latest version of the kernel. I have run this driver on a PMC-Sierra Xiao Hu board with the 2.6.28 kernel, and I have had no problems with it in my configuration. The attached patch applies cleanly against 2.6.28. Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: alan@lxorguk.ukuu.org.uk [bart: s/HWIF(drive)/drive->hwif/] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06piix: sync ich_laptop[] with ata_piix.cBartlomiej Zolnierkiewicz
Allows UDMA > 33 on ACER TM290 and ACER Aspire 1694WLMi. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: fix ide_port_scan() to do ACPI setup after initializing request queuesBartlomiej Zolnierkiewicz
This makes ide_port_scan()'s behavior match ide_host_register()'s one and fixes OOPS in elv_may_queue() during port re-scan. Reported-and-tested-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: remove now redundant ->cur_dev checksBartlomiej Zolnierkiewicz
* ->cur_dev should now be always valid if ->handler is set so remove redundant checks from ide_intr() and ide_timer_expiry(). * Apply CodingStyle fixups in ide_timer_expiry() while at it. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: remove superfluous hwif variable assignment from ide_timer_expiry()Bartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: use ide_pci_is_in_compatibility_mode() helper in setup-pci.cBartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: make "paranoia" ->handler check in ide_intr() more strictBartlomiej Zolnierkiewicz
If ->handler is set while it shouldn't be it indicates deep problems so BUG_ON()-ning and preventing further damage is much more appropriate than merely printing an error message. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide-cd: convert to ide-atapi facilitiesBorislav Petkov
... and remove no longer needed cdrom_start_packet_command and cdrom_transfer_packet_command. Tested lightly with ide-cd and ide-floppy. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide-cd: start DMA before sending the actual packet commandBorislav Petkov
as it is done for all other IDE ATAPI devices. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide-cd: wait for DRQ to get set per defaultBorislav Petkov
... instead of assuming it is set for accelerated DRQ type devices. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: Fix drive's DWORD-IO handlingMario Schwalbe
According the documentation, id[ATA_ID_DWORD_IO] is non-zero if the drive supports dword IO, while the code disables support by setting IDE_DFLAG_NO_IO_32BIT. In addition, this word has been reused by the ATA8 specification. This patch fixes both cases. Signed-off-by: Mario Schwalbe <schwalbe@inf.tu-dresden.de> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> [bart: remove id[ATA_ID_DWORD_IO] check altogether per Sergei's suggestion] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: add port and host iteratorsBartlomiej Zolnierkiewicz
Add ide_port_for_each_dev() / ide_host_for_each_port() iterators and update IDE code to use them. While at it: - s/unit/i/ variable in ide_port_wait_ready(), ide_probe_port(), ide_port_tune_devices(), ide_port_init_devices_data(), do_reset1(), ide_acpi_set_state() and scc_dma_end() - s/d/i/ variable in ide_proc_port_register_devices() There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: dynamic allocation of device structuresBartlomiej Zolnierkiewicz
Allocate device structures dynamically instead of having them embedded in ide_hwif_t: * Remove needless zeroing of port structure from ide_init_port_data(). * Add ide_hwif_t.devices[MAX_DRIVES] (table of pointers to the devices). * Add ide_port_{alloc,free}_devices() helpers and use them respectively in ide_{host,free}_alloc(). * Convert all users of ->drives[] to use ->devices[] instead. While at it: * Use drive->dn for the slave device check in scc_pata.c. As a nice side-effect this patch cuts ~1kB (x86-32) from the resulting code size: text data bss dec hex filename 53963 1244 237 55444 d894 drivers/ide/ide-core.o.before 52981 1244 237 54462 d4be drivers/ide/ide-core.o.after Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: NUMA aware allocation of host and port structuresBartlomiej Zolnierkiewicz
kzalloc() -> kzalloc_node() in ide_host_alloc(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06it821x: use ide_get_pair_dev() helperBartlomiej Zolnierkiewicz
Because presence of the peer device was not checked in it821x_set_pio_mode() PIO0 mode was used for taskfile PIO in single device configurations. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06cmd64x: use ide_get_pair_dev() helperBartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06cmd640: use ide_get_pair_dev() helperBartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06amd74xx: use ide_get_pair_dev() helperBartlomiej Zolnierkiewicz
There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: remove ->error method from struct ide_driverBartlomiej Zolnierkiewicz
* Remove (now superfluous) ->error method from struct ide_driver. * Unexport __ide_error() and make it static. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: unexport ide_wait_not_busy()Bartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: remove ide_driver_t typedefBartlomiej Zolnierkiewicz
While at it: - s/struct ide_driver_s/struct ide_driver/ - use to_ide_driver() macro in ide-proc.c Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: remove 'byte' typedefBartlomiej Zolnierkiewicz
Just use u8 instead, also s/__u8/u8/ in ide-cd.h while at it. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: remove ide_pci_enablebit_t typedefBartlomiej Zolnierkiewicz
Remove needless parens while at it. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: remove local_irq_set() macroBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-12 07:00:53 +0000