summaryrefslogtreecommitdiffstats
path: root/drivers/ide
AgeCommit message (Collapse)Author
2009-05-30ide_pci_generic: add quirk for Netcell ATA RAIDBartlomiej Zolnierkiewicz
We need to explicitly mark words 85-87 as valid ones since firmware doesn't do it. This should fix support for LBA48 and FLUSH CACHE [EXT] command which stopped working after we applied more strict checking of identify words in: commit 942dcd85bf8edf38cdc3745306ca250684d99a61 ("ide: idedisk_supports_lba48() -> ata_id_lba48_enabled()") and commit 4b58f17d7c45a8e5f4acda641bec388398b9c0fa ("ide: ide_id_has_flush_cache() -> ata_id_flush_enabled()") Reported-and-tested-by: "Trevor Hemsley" <trevor.hemsley@ntlworld.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22via82cxxx: Add VIA VX855 PCI Device IDHarald Welte
This patch adds the PCI Device ID 0xc409 to the PCI ID table of via82cxxx.c, as well as the 0x8409 south bridge ID. This is required to make the IDE driver work on the VX855/VX875 integrated chipset. Signed-off-by: Harald Welte <HaraldWelte@viatech.com> Cc: Joseph Chan <JosephChan@via.com.tw> Cc: Bruce Chang <BruceChang@via.com.tw> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22ide: report timeouts in ide_busy_sleep()Bartlomiej Zolnierkiewicz
* change 'hwif' argument to 'drive' * report an error on timeout Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22ide: improve failed opcode reportingBartlomiej Zolnierkiewicz
Nowadays we (almost) always store the currently executing command in hwif->cmd so we can use it for the failed opcode reporting. Cc: Martin Lottermoser <Martin.Lottermoser@t-online.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22ide: fix printk() levels in ide_dump_ata[pi]_error()Bartlomiej Zolnierkiewicz
Fixes "<3>" in error messages like this one: hdc: cdrom_decode_status: error=0x40 <3>{ LastFailedSense=0x04 } Reported-by: Martin Lottermoser <Martin.Lottermoser@t-online.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22ide: fix OOPS during ide-cd error recoveryBartlomiej Zolnierkiewicz
On Tuesday 19 May 2009 20:29:28 Martin Lottermoser wrote: > hdc: cdrom_decode_status: error=0x40 <3>{ LastFailedSense=0x04 } > ide: failed opcode was: unknown > hdc: DMA disabled > ------------[ cut here ]------------ > kernel BUG at drivers/ide/ide-io.c:872! It is possible for ide-cd to ignore ide_error()'s return value under some circumstances. Workaround it in ide_intr() and ide_timer_expiry() by checking if there is a device/port reset pending currently. Fixes bug #13345: http://bugzilla.kernel.org/show_bug.cgi?id=13345 Reported-by: Martin Lottermoser <Martin.Lottermoser@t-online.de> Reported-and-tested-by: Modestas Vainius <modestas@vainius.eu> Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-22ide: fix 40-wire cable detection for TSST SH-S202* ATAPI devices (v2)Bartlomiej Zolnierkiewicz
Since 2.6.26 we support UDMA66 on ATAPI devices requiring IVB quirk: commit 8588a2b732928b343233af9b1855705b8286bed4 ("ide: add SH-S202J to ivb_list[]") We also later added support for more such devices in: commit e97564f362a93f8c248246c19828895950341252 ("ide: More TSST drives with broken cable detection") and in: commit 3ced5c49bd2d1f2c7f769e3a54385883de63a652 ("ide: add TSSTcorp CDDVDW SH-S202H to ivb_list[]") It turns out that such devices lack cable detection altogether (which in turn results in incorrect detection of 40-wire cables by our current cable detection strategy) so always handle them by trusting host-side cable detection only. v2: Model detection fixup from Martin. Reported-and-tested-by: Martin Lottermoser <Martin.Lottermoser@t-online.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-16piix: The Sony TZ90 needs the cable type hardcodingAlan Cox
The Sony TZ90 needs the cable type hardcoding. See bug #12734 Signed-off-by: Alan Cox <alan@linux.intel.com> Reported-by: Jonathan E. Snow <jesnow@uh.edu> [bart: port it from ata_piix to piix and give reporter the proper credit] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-16icside: register second channel of version 6 PCBSergei Shtylyov
The second IDE channel of version 6 PCB is not being registered anymore since the commit 48c3c1072651922ed153bcf0a33ea82cf20df390 (ide: add struct ide_host (take 3)). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-16ide-tape: remove back-to-back REQUEST_SENSE detectionTejun Heo
Impact: fix an oops which always triggers ide_tape_issue_pc() assumed drive->pc isn't NULL on invocation when checking for back-to-back request sense issues but drive->pc can be NULL and even when it's not NULL, it's not safe to dereference it once the previous command is complete because pc could have been freed or was on stack. Kill back-to-back REQUEST_SENSE detection. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-30ide-cd: fix REQ_QUIET tests in cdrom_decode_statusBorislav Petkov
Original patch (dfa4411cc3a690011cab90e9a536938795366cf9) was buggy. This is a more proper fix which introduces blk_rq_quiet() macro alleviating the need for dumb, too short caching variables. Thanks to Helge Deller and Bart for debugging this. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Reported-and-tested-by: Helge Deller <deller@gmx.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-23palm_bk3710: palm_bk3710_udmatimings[] CodingStyle fixupBartlomiej Zolnierkiewicz
Remove superfluous commas and add missing whitespaces. Noticed-by: Joe Perches <joe@perches.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-23palm_bk3710: those registers/bitfields don't existDavid Brownell
Bugfixes noted by checking the code against the controller documentation (TI document number SPRUE21): - Remove declarations for eight non-existent registers (!); and remove accesses to two of them. - Remove access to various non-existent bitfields in some of the registers which *do* exist (those fields must-be-zero). - Provide comment to replace bogus reset logic (removed above, it relied on non-existent bitfields). Resets require GPIO help; this driver doesn't currently know about that. With some minor cleanup: relocate a comment, avoid an extra lookup of the PIO timings. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-22ide: Stop disks on reboot for laptop which cuts powerBruno Prémont
My laptop (Acer Travelmate 660) always cuts the power when rebooting which causes the disk to emergency-park it's head. Add a dmi check to stop disk as for shutdown on this laptop. Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-22ide-cd: fix kernel crash on hppa regressionHelge Deller
With 2.6.30-rc2 I face a kernel crash on the 32bit hppa architecture due to ide-cd when udev creates the device nodes at startup: Kernel Fault: Code=26 regs=8ed34c40 (Addr=00000024) IASQ: 00000000 00000000 IAOQ: 1034b5ac 1034b5b0 IIR: 4ab30048 ISR: 00000000 IOR: 00000024 CPU: 0 CR30: 8ed34000 CR31: ffff55ff ORIG_R28: 00000000 IAOQ[0]: ide_complete_rq+0x2c/0x70 IAOQ[1]: ide_complete_rq+0x30/0x70 RP(r2): cdrom_newpc_intr+0x178/0x46c Backtrace: [<1035c608>] cdrom_newpc_intr+0x178/0x46c [<1034c494>] ide_intr+0x1b0/0x214 [<1016d284>] handle_IRQ_event+0x70/0x150 [<1016d4b0>] __do_IRQ+0x14c/0x1cc [<102f7864>] superio_interrupt+0x88/0xbc [<1016d284>] handle_IRQ_event+0x70/0x150 [<1016d4b0>] __do_IRQ+0x14c/0x1cc [<10112efc>] do_cpu_irq_mask+0x9c/0xd0 [<10116068>] intr_return+0x0/0x4 This crash seems to happen due to an uninitialized variable "rc". The compiler even warns about that: CC drivers/ide/ide-cd.o /mnt/sda4/home/cvs/parisc/git-kernel/linus-linux-2.6/drivers/ide/ide-cd.c: In function `cdrom_newpc_intr': /mnt/sda4/home/cvs/parisc/git-kernel/linus-linux-2.6/drivers/ide/ide-cd.c:612: warning: `rc' might be used uninitialized in this function After applying the trivial patch below, which just initializes the variable to zero, the kernel doesn't crash any longer: Starting the hotplug events dispatcher: udevd. Synthesizing the initial hotplug events... hda: command error: status=0x51 { DriveReady SeekComplete Error } hda: command error: error=0x54 <3>{ AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown done. Signed-off-by: Helge Deller <deller@gmx.de> Acked-by: Borislav Petkov <petkovbb@gmail.com> Cc: Linus <torvalds@linux-foundation.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-22palm_bk3710: UDMA performance fixDavid Brownell
Fix UDMA throughput bug: tCYC averages t2CYCTYP/2, but the code previously assumed it was the same as t2CYCTYP. (That is, it was using just one clock edge, not both.) Move the table's type declaration so it's adjacent to the table, making it more clear what those numbers mean. On one system this change increased throughput by almost 4x: UDMA/66 sometimes topped 23 MB/sec (on a drive known to do much better). On another system it was around a 10% win (UDMA/66 up to 7+ MB/sec). The difference might be caused by the ratio between memory and IDE clocks. In the system with large speedup, this was exactly 2 (as a workaround for a rev 1.1 silicon bug). The other system used a more standard ratio of 1.63 (and rev 2.1 silicon) ... clock domain synch might have some issues, they're not unheard-of. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-18cs5536: define dma_sff_read_status() methodSergei Shtylyov
The driver somehow got merged with the initializer for the dma_sff_read_status() method missing which caused kernel panic on bootup. This should fix the kernel.org bug #13026... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Reported-by: Arnd Hannemann <hannemann@nets.rwth-aachen.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-18ide: fix barriers supportBartlomiej Zolnierkiewicz
Freeing non-slab objects is bad and results in an oops. Fix it. Reported-and-tested-by: Andrew Price <andy@andrewprice.me.uk> Cc: Theodore Tso <tytso@mit.edu> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-18ide: Remove void castsJack Stone
Remove uneeded void casts Signed-off-by: Jack Stone <jwjstone@fastmail.fm> Cc: jeff@garzik.org Cc: kernel-janitors@vger.kernel.org Cc: Jack Stone <jwjstone@fastmail.fm> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-18hpt366: use ATA_DMA_* constantsSergei Shtylyov
Use ATA_DMA_* constants instead of the bare numbers for the BMIDE register bits. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-18hpt366: fix HPT370 DMA timeoutsSergei Shtylyov
The big driver change in 2.4.19-rc1 introduced a regression for many HPT370[A] chips -- DMA stopped to work completely, only causing endless timeouts... The culprit has been identified (at last!): it turned to be the code resetting the DMA state machine before each transfer. Stop doing it now as this counter- measure has clearly caused more harm than good. This should fix the kernel.org bug #7703. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08at91_ide: turn on PIO 6 supportStanislaw Gruszka
As we have already PIO 6 transfer mode supported in IDE layer, we can turn it on in the driver. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Tested-by: "Steve Wootton" <swootton@esi-estech.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08at91_ide: remove unused ide_mm_{outb,inb}Stanislaw Gruszka
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
2009-04-08ide-cd: reverse NOT_READY sense key logicBorislav Petkov
Make the case of flushing the drive's cache explicit. There should be no functional change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08ide: refactor tf_read() methodSergei Shtylyov
Simplify tf_read() method, making it deal only with 'struct ide_taskfile' and the validity flags that the upper layer passes, and factoring out the code that deals with the high order bytes into ide_tf_readback() to be called from the only two functions interested, ide_complete_cmd() and ide_dump_sector(). This should stop the needless code duplication in this method and so make it about twice smaller than it was; along with simplifying the setup for the method call, this should save both time and space... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08ide: refactor tf_load() methodSergei Shtylyov
Simplify tf_load() method, making it deal only with 'struct ide_taskfile' and the validity flags that the upper layer passes, and moving the code that deals with the high order bytes into the only function interested, do_rw_taskfile(). This should stop the needless code duplication in this method and so make it about twice smaller than it was; along with simplifying the setup for the method call, this should save both time and space... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08ide: call write_devctl() method from tf_read() methodSergei Shtylyov
Use write_devctl() method to clear/set the HOB bit in tf_read() method. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08ide: move common code out of tf_load() methodSergei Shtylyov
Move device register masking (and setting drive->select) out of tf_load() method and into the only function that needs to use this code, do_rw_taskfile()... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> [bart: fix whitespace error] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08ide: simplify 'struct ide_taskfile'Sergei Shtylyov
Make 'struct ide_taskfile' cover only 8 register values and thus put two such fields ('tf' and 'hob') into 'struct ide_cmd', dropping unnecessary 'tf_array' field from it. This required changing the prototype of ide_get_lba_addr() and ide_tf_dump(). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> [bart: fix setting of ATA_LBA bit for LBA48 commands in __ide_do_rw_disk()] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08ide: replace IDE_TFLAG_* flags by IDE_VALID_*Sergei Shtylyov
Replace IDE_TFLAG_{IN|OUT}_* flags meaning to the taskfile register validity on input/output by the IDE_VALID_* flags and introduce 4 symmetric 8-bit register validity indicator subfields, 'valid.{input/output}.{tf|hob}', into the 'struct ide_cmd' instead of using the 'tf_flags' field for that purpose (this field can then be turned from 32-bit into 8-bit one). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08ide-cd: fix intendation in cdrom_decode_status()Bartlomiej Zolnierkiewicz
Based on earlier work by Borislav Petkov. Fix intendation in cdrom_decode_status(), no real code changes. While at it: - beautify comments There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08ide-cd: unify handling of fs and pc requests in cdrom_decode_status()Bartlomiej Zolnierkiewicz
Based on earlier work by Borislav Petkov. Unify handling of fs and pc requests in cdrom_decode_status(). While at it: - remove unreachable code The only change in functionality is that for pc requests more detailed error message will be printed for following sense keys: * ILLEGAL_REQUEST * DATA_PROTECT * MEDIUM_ERROR * BLANK_CHECK Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08ide-cd: convert cdrom_decode_status() to use switch statementsBartlomiej Zolnierkiewicz
Based on earlier work by Borislav Petkov. Convert cdrom_decode_status() to use switch statements in preparation to unify handling of fs and pc requests. While at it: - remove superfluous comments and do minor CodingStyle fixups There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08ide-cd: update debugging supportBorislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> [bart: extracted from "ide-cd: cleanup cdrom_decode_status" patch] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08ide-cd: respect REQ_QUIET for fs requests in cdrom_decode_status()Borislav Petkov
There should be no functional change resulting from this patch. Suggested-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08ide: remove unused #include <linux/version.h>Huang Weiyi
Remove unused #include <linux/version.h> in drivers/ide/at91_ide.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08tx4939ide: Fix tx4939ide_{in,out}put_data_swap argumentAtsushi Nemoto
The commit adb1af9 ("ide: pass command instead of request to ide_pio_datablock()") missed tx4939ide driver. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08tx493[89]ide: Remove big endian version of tx493[89]ide_tf_{load,read}Atsushi Nemoto
Now tx493[89]ide_tf_{load,read} do not contain word I/O operations. They are endian-free now. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>, Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08ide-cd: carve out an ide_cd_breathe()-helper for fs write requestsBorislav Petkov
There should be no functional change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08ide-cd: move status checking into the IRQ handlerBorislav Petkov
There should be no functional change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08ide-h8300: remove custom tf_{read|load}() methodsSergei Shtylyov
Since tf_{read|load}() methods of this driver have now become identical to their standard counterparts using I/O port accesses, there's no need to override those anymore... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08at91_ide: remove custom tf_{read|load}() methodsSergei Shtylyov
Since tf_{read|load}() methods of this driver have now become identical to their standard counterparts using MMIO accesses, there's no need to override those anymore... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08ide-h8300: remove mm_{inw|outw}()Sergei Shtylyov
Remove two no longer used functions that I've overlooked... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08tx4939ide: remove wmb()Atsushi Nemoto
* define CHECK_DMA_MASK * remove use of wmb() Reported-by: Grant Grundler <grundler@google.com> Reviewed-by: Grant Grundler <grundler@google.com> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
2009-04-08ide: remove wmb() from ide-dma-sff.c and scc_pata.cGrant Grundler
This patch: o replaces "mask" variable in ide_dma_end() with #define. o removes use of wmb() in ide-dma-sff.c and scc_pata.c. o is not tested - I don't have (or want) the HW. Signed-off-by: Grant Grundler <grundler@google.com> Cc: KOBAYASHI Yoshitake <yoshitake.kobayashi@toshiba.co.jp> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08ide: falconide/q40ide - Use __ide_mm_{in,out}sw() for dataGeert Uytterhoeven
Both of commits f94116aeec7a299640dd692128e1d22178affa8d ("ide: cleanup <asm-m68k/ide.h>") and 15a453a955f89f6545118770c669b52e925368bd ("ide: include <asm/ide.h> only when needed") break falconide: | Uniform Multi-Platform E-IDE driver | ide: Falcon IDE controller | Probing IDE interface ide0... | hda: Sarge m68k, ATA DISK drive | ide0 at 0xfff00000 on irq 15 (serialized) | ide-gd driver 1.18 | hda: max request size: 128KiB | hda: 2118816 sectors (1084 MB) w/256KiB Cache, CHS=2102/16/63 | hda:<4>hda: lost interrupt This happens because falconide relies on {in,out}sw() being redefined in <asm/ide.h>, as included by <linux/ide.h>, which is no longer the case. Use __ide_mm_{in,out}sw() from <asm/ide.h> instead, just like ide_{in,out}put_data() do. The same problem seems to exist in q40ide. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-08ide: Fix host drivers that need IRQF_SHAREDGeert Uytterhoeven
commit 255115fb35f80735c21a1cbe9809e9795a3af26e ("ide: allow host drivers to specify IRQ flags") added irq_flags fields to struct ide_port_info and struct ide_host. Drivers can now set ide_port_info.irq_flags = IRQF_SHARED, while init_irq() passes ide_host.irq_flags to request_irq(). Unfortunately ide_host.irq_flags is never set, causing (on ARAnyM): | Uniform Multi-Platform E-IDE driver | ide: Falcon IDE controller | Probing IDE interface ide0... | hda: Sarge m68k, ATA DISK drive | init_irq: sa = 0 | ide0: disabled, unable to get IRQ 15 | ide0: failed to initialize IDE interface | ide0: disabling port Solve this by copying ide_port_info.irq_flags to ide_host.irq_flags in ide_host_alloc(). This bug probably affects the following IDE host drivers: - buddha - delkin_cb - falconide - gayle - ide-cs - macide - q40ide - scc_pata - sgiioc4 Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-07dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-31ide-floppy: do not complete rq's prematurelyBorislav Petkov
... and access them afterwards. Simplify rq completing code while at it. Spotted-by: Tejun Heo <tj@kernel.org> Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31ide: be able to build pmac driver without IDE built-inGilles Espinasse
No reason to need IDE built-in to be able to compile pmac driver. Tested to work on 2.6.29-rc8 and 2.6.28.8 with ide and pmac as modules inside an initramfs. Signed-off-by: Gilles Espinasse <g.esp@free.fr> Cc: sam@ravnborg.org Cc: benh@kernel.crashing.org [bart: remove now superfluous IDE check] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-25 12:27:36 +0000