summaryrefslogtreecommitdiffstats
path: root/drivers/ide
AgeCommit message (Collapse)Author
2008-02-26ide: remove stale comments from ide-dma.c (take 2)Bartlomiej Zolnierkiewicz
- ide-dma.c is not a separate module - ide-dma.c is not PCI specific anymore - DMA is enabled by default nowadays - link for Intel Zappa BIOS is dead etc. v2: * Some comments should be preserved. (Noticed by Mark Lord) Cc: Mark Lord <liml@rtr.ca> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-26qd65xx: remove commented out codeBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-26ide-tape: schedule driver for removal after 6 monthsBorislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-26ide-disk: add missing printk() KERN_* levelsBartlomiej Zolnierkiewicz
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-26ide: fix sparse warning about shadowing 'flags' symbolBartlomiej Zolnierkiewicz
drivers/ide/ide.c:801:18: warning: symbol 'flags' shadows an earlier one drivers/ide/ide.c:732:16: originally declared here Also fix some whitespace damage while at it. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-26ide-cd: fix CD/DVD burningAndreas Schwab
Move counting of sense bytes into the transfer loop. Signed-off-by: Andreas Schwab <schwab@suse.de> Acked-by: Borislav Petkov <petkovbb@gmail.com> Cc: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-26ide-cd: fix 'ireason' handling for REQ_TYPE_ATA_PC requestsBartlomiej Zolnierkiewicz
Pass 'struct request *rq' to ide_cd_check_ireason() from cdrom_newpc_intr() and use ide_cd_check_ireason() also for REQ_TYPE_ATA_PC requests. This fixes some hangs caused by not finishing the transfer before ending the request and also makes use of 'ireason == 1' quirk for spurious IRQs. Tested-by: Brad Rosser <brad.rosser@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-26qd65xx: fix setup of QD6580 Control registerBartlomiej Zolnierkiewicz
Control register of QD6580 should be setup before probing for devices. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-26ide: skip probing port if "hdx=noprobe" was used for both devices on itBartlomiej Zolnierkiewicz
* Skip probing port if "hdx=noprobe" parameter was used for both devices on it. * Obsolete "idex=noprobe" parameter - it only works for ide_generic, cmd640 and PCI hosts in Compatibility mode (on alpha/x86/ia64/m32r/mips/ppc32). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-26ide: remove redundant comment from ide_unregister()Bartlomiej Zolnierkiewicz
Identical comment is present in ide_hwif_release_regions() documentation. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-26hpt366: fix section mismatch warningsSam Ravnborg
hpt366: fix section mismatch warnings Fix following warnings: WARNING: o-sparc64/vmlinux.o(.data+0x195a38): Section mismatch in reference from the variable hpt37x_info.0 to the variable .devinit.data:hpt370 WARNING: o-sparc64/vmlinux.o(.data+0x195a40): Section mismatch in reference from the variable hpt37x_info.0 to the variable .devinit.data:hpt370a WARNING: o-sparc64/vmlinux.o(.data+0x195a48): Section mismatch in reference from the variable hpt37x_info.0 to the variable .devinit.data:hpt372 WARNING: o-sparc64/vmlinux.o(.data+0x195a50): Section mismatch in reference from the variable hpt37x_info.0 to the variable .devinit.data:hpt372n Replace a static array with a small switch resulting in more readable code. Mark the pci table __devinitconst. A lot of variables are const but annotated __devinitdata. Annotating them __devinitconst would cause a section type conflict error when build for 64 bit powerpc. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-26ide-cd: Enable audio play quirk for Optiarc DVD RW AD-5200A driveBorislav Petkov
Reported-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-23PM: Introduce PM_EVENT_HIBERNATE callback stateRafael J. Wysocki
During the last step of hibernation in the "platform" mode (with the help of ACPI) we use the suspend code, including the devices' ->suspend() methods, to prepare the system for entering the ACPI S4 system sleep state. But at least for some devices the operations performed by the ->suspend() callback in that case must be different from its operations during regular suspend. For this reason, introduce the new PM event type PM_EVENT_HIBERNATE and pass it to the device drivers' ->suspend() methods during the last phase of hibernation, so that they can distinguish this case and handle it as appropriate. Modify the drivers that handle PM_EVENT_SUSPEND in a special way and need to handle PM_EVENT_HIBERNATE in the same way. These changes are necessary to fix a hibernation regression related to the i915 driver (ref. http://lkml.org/lkml/2008/2/22/488). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Tested-by: Jeff Chua <jeff.chua.linux@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-21ide: mark "ide=reverse" option as obsoleteBartlomiej Zolnierkiewicz
- it is valid only if "Probe IDE PCI devices in the PCI bus order (DEPRECATED)" config option is used - Greg needs to remove pci_get_device_reverse() for PCI core changes Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-19ide-cd: fix missing residual count setting in DMA modeKiyoshi Ueda
This patch fixes the missing residual count setting in DMA mode, which was introduced during the conversion to blk-end-request. The residual count could be used by the request submitter. So if it isn't set correctly, some upper layers does not work. (e.g. wodim for CD burning.) The bug is in only DMA mode. In PIO mode, we are setting the residual count correctly, so no need to fix. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Reported-by: Andreas Schwab <schwab@suse.de> Tested-by: Andreas Schwab <schwab@suse.de> Tested-by: Laura Garcia <nevola@gmail.com> Tested-by: Borislav Petkov <petkovbb@googlemail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-19ht6560b: force prefetch for some devicesJan Evert van Grootheest
Prefetch needs to be set for some ide devices to work when connected to a ht6560b interface. This was not always done properly, causing a system with a HD and CD on the primary interface to not work properly. Or, in effect, hang hard. This patch forces prefetch on devices before checking whether it is necessary to change the settings in the interface This patch should also be applied to 2.4. I don't currently have a 2.4 tree around. (also change my email address) Signed-off-by: Jan Evert van Grootheest <janevert@caiway.nl> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-19ht6560b can only do up to PIO mode 4Jan Evert van Grootheest
According to the datasheet, ht6560b only supports up to PIO mode 4. [bart: manually ported it over 2.6.25-rc2] Signed-off-by: Jan Evert van Grootheest <janevert@caiway.nl> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-19via82cxxx: add new PCI id for cx700Andrew Smith
[bart: manually ported it over via82cxxx changes] From: Andrew Smith <asmith@tranquility.fsbusiness.co.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-19falconide: locking bugfixBartlomiej Zolnierkiewicz
commit 8ac4ce742c66100931b6f2d7a36b0df08bc721fe ("ide: fix host drivers depending on ide_generic to probe for interfaces (take 2)") moved probing to falconide but forgot to take care of Atari specific locking - fix it. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michael Schmitz <schmitz@debian.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-19ide/libata: ST310211A has buggy HPA tooMikko Rapeli
Signed-off-by: Mikko Rapeli <mikko.rapeli@teleca.com> Tested-by: Bart Champagne <bart@as35701.net> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-19ide: Add missing base addresses for falconide and macideGeert Uytterhoeven
commit 29dd59755a849cc6475faa6a75f3b804e23a6fc2 ("ide: remove ide_setup_ports") forgot to take into account the base addresses for the CONTROL registers for falconide and macide, as pointed out by Michael Schmitz. Falconide was tested on Aranym. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michael Schmitz <schmitz@debian.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11ide: remove stale comment from ide-lib.cBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11ide: fix comment in init_irq()Bartlomiej Zolnierkiewicz
APUS support is gone... Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11ide: ide_init_port() bugfixBartlomiej Zolnierkiewicz
On Sunday 10 February 2008, Atsushi Nemoto wrote: > On Sun, 06 Jan 2008 18:03:10 +0100, Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> wrote: > > + /* reset DMA masks only for SFF-style DMA controllers */ > > + if ((d->host_flags && IDE_HFLAG_NO_DMA) == 0 && hwif->dma_base == 0) > > + hwif->swdma_mask = hwif->mwdma_mask = hwif->ultra_mask = 0; > > It might be too late, but "host_flags && IDE_HFLAGS_NO_DMA" seems > wrong for me. Fix regression caused by commmit c413b9b94d9a8e7548cc4b2e04b7df0439ce76fd ("ide: add struct ide_port_info instances to legacy host drivers"). Reported-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11ide-disk: fix flush requests (take 2)Bartlomiej Zolnierkiewicz
commit 813a0eb233ee67d7166241a8b389b6a76f2247f9 Author: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Date: Fri Jan 25 22:17:10 2008 +0100 ide: switch idedisk_prepare_flush() to use REQ_TYPE_ATA_TASKFILE requests ... broke flush requests. Allocating IDE command structure on the stack for flush requests is not a very brilliant idea: - idedisk_prepare_flush() only prepares the request and it doesn't wait for it to be completed - there are can be multiple flush requests queued in the queue Fix the problem (per hints from James Bottomley) by: - dynamically allocating ide_task_t instance using kmalloc(..., GFP_ATOMIC) - adding new taskfile flag (IDE_TFLAG_DYN) - calling kfree() in ide_end_drive_command() if IDE_TFLAG_DYN is set (while at it rename 'args' to 'task' and fix whitespace damage) [ This will be fixed properly before 2.6.25 but this bug is rather critical and the proper solution requires some more work + testing. ] Thanks to Sebastian Siewior and Christoph Hellwig for reporting the problem and testing patches (extra thanks to Sebastian for bisecting it to the guilty commmit). Tested-by: Sebastian Siewior <ide-bug@ml.breakpoint.cc> Cc: Christoph Hellwig <hch@infradead.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Tejun Heo <htejun@gmail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11ide: introduce CONFIG_BLK_DEV_IDEDMA_SFF optionSergei Shtylyov
Introduce new option CONFIG_BLK_DEV_IDEDMA_SFF for non-PCI SFF-8038i compatible bus mastering IDE controllers (which there are a few known), thus fixing a hack made for Palmchip BK3710 controller... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Anton Salnikov <asalnikov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11bast-ide: build fixBartlomiej Zolnierkiewicz
On Saturday 09 February 2008, Adrian Bunk wrote: > Commit 9e016a719209d95338e314b46c3012cc7feaaeec causes the following > compile error: > > <-- snip --> > > ... > CC drivers/ide/arm/bast-ide.o > /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/arm/bast-ide.c: In function 'bastide_register': > /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/arm/bast-ide.c:31: error: 'hwif' redeclared as different kind of symbol > /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/arm/bast-ide.c:29: error: previous definition of 'hwif' was here > make[4]: *** [drivers/ide/arm/bast-ide.o] Error 1 > > <-- snip --> Remove 'ide_hwif_t **hwif' argument from bastide_register() (together with write-only ifs[]). Cc: Adrian Bunk <bunk@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11ide-tape: remove never executed codeBartlomiej Zolnierkiewicz
rq->cmd[0] is never set to REQ_IDETAPE_READ_BUFFER so remove REQ_IDETAPE_READ_BUFFER handling from idetape_create_write_cmd() and the define itself. Then remove no longer used idetape_create_read_buffer_cmd() and IDETAPE_RETRIEVE_FAULTY_BLOCK define. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11ide: fix ide/legacy/gayle.c compilationAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11ide-cd: replace ntohs with generic byteorder macro be16_to_cpuBorislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11ide: remove stale version numberBartlomiej Zolnierkiewicz
On Thursday 03 January 2008, Robert Hancock wrote: [...] > How about getting rid of this stupid thing in drivers/ide/ide.c: > > #define       REVISION        "Revision: 7.00alpha2" > > which is used in: > > printk(KERN_INFO "Uniform Multi-Platform E-IDE driver " REVISION "\n"); > > It's been 7.00alpha2 for god knows how long, so clearly this version > number is not useful.. Cc: Robert Hancock <hancockr@shaw.ca> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11pdc202xx_old: always enable burst modeBartlomiej Zolnierkiewicz
Alan has noticed that distros always enabled burst mode (+ datasheet confirms that it is the right thing to do). Thus fix pdc202xx_old host driver to do it unconditionally and remove no longer needed CONFIG_PDC202XX_BURST option. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11palm_bk3710: use struct ide_port_infoBartlomiej Zolnierkiewicz
* Factor out cable detection to palm_bk3710_cable_detect(). * Add palm_bk3710_init_hwif() (->init_hwif method implementation). * Remove needless ->quirkproc initialization. * Add missing ->pio_mask initialization. * Use ATA_* defines for setting ->{ultra,mwdma}_mask. * Add 'struct ide_port_info palm_bk3710_port_info' and pass it to ide_device_add(). Then remove open-coded 'hwif' initialization. Cc: Anton Salnikov <asalnikov@ru.mvista.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11palm_bk3710: port initialization/probing bugfixBartlomiej Zolnierkiewicz
Probe port _after_ it is fully initialized. Cc: Anton Salnikov <asalnikov@ru.mvista.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11palm_bk3710: fix ide_unregister() usageBartlomiej Zolnierkiewicz
Don't set 'restore' flag for ide_unregister() when initializing new interface. [ identical change as done to bast-ide/ide-cs/delkin_cb host drivers by commit 909f4369bca30f9a186316a3bf2b4a9c1e702a25 ] Cc: Anton Salnikov <asalnikov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11palm_bk3710: ide_register_hw() -> ide_device_add()Bartlomiej Zolnierkiewicz
* Convert palm_bk3710 host driver to use ide_device_add() instead of ide_register_hw() (while at it drop doing "ide_unregister()" loop which tries to unregister _all_ IDE interfaces if useable ide_hwifs[] slot cannot be find). [ identical change as done to bast-ide/ide-cs/delkin_cb host drivers by commit 9e016a719209d95338e314b46c3012cc7feaaeec ] * Rename 'ide_ctlr_info' to 'hw' and 'index' to 'i' while at it. Cc: Anton Salnikov <asalnikov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11ide: insert BUG_ON() into __ide_set_handler() (take 2)Sergei Shtylyov
Replace the check for hwgroup->handler and printk(KERN_CRIT, ...) at the start of __ide_set_handler() with mere BUG_ON() while removing such from the caller, ide_execute_command(). Fix up the code formatting, while at it... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11cs5520: remove stale commentBenjamin Herrenschmidt
Remove stale comment from the cs5520 IDE driver. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-11ide: another possible ide panic fix for blk-end-requestKiyoshi Ueda
I have reviewed all blk-end-request patches again to confirm whether there are any similar problems with the last week's ide-cd panic: http://lkml.org/lkml/2008/1/29/140 And I found a possible similar bug in ide-io change: ide_end_drive_cmd() could be called for blk_pc_request() which could have bios. To complete such requests correctly, we need to pass the actual size of the request. Otherwise, __blk_end_request() returns 1 because the request still has bios, and the system will BUG() unnecessarily. The following patch fixes the bug and should be applied on top of Linus' git. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-09ide: introduce HAVE_IDESam Ravnborg
To allow flexible configuration of IDE introduce HAVE_IDE. All archs except arm, um and s390 unconditionally select it. For arm the actual configuration determine if IDE is supported. This is a step towards introducing drivers/Kconfig for arm. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Russell King - ARM Linux <linux@arm.linux.org.uk> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-08aout: remove unnecessary inclusions of {asm, linux}/a.out.hDavid Howells
Remove now unnecessary inclusions of {asm,linux}/a.out.h. [akpm@linux-foundation.org: fix alpha build] Signed-off-by: David Howells <dhowells@redhat.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata_piix.c:piix_init_one() must be __devinit sata_via.c: Remove missleading comment. libata-core: unblacklist HITACHI drives sata_nv: fix ATAPI issues with memory over 4GB (v7) ata: drivers/ata/sata_mv.c needs dmapool.h libata: kill now unused n_iter and fix sata_fsl ahci: fix CAP.NP and PI handling sata_mv: Support SoC controllers Rename: linux/pata_platform.h to linux/ata_platform.h
2008-02-06cleanup after APUS removalAdrian Bunk
After the APUS removal, some code can be removed. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Karsten Keil <kkeil@suse.de> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Rename: linux/pata_platform.h to linux/ata_platform.hJeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-02-06ide-tape: bump minor driver versionBorislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-06ide-tape: cleanup the remaining codestyle issuesBorislav Petkov
... thus decreasing checkpatch.pl errors to 0. Bart: - remove needless function prototypes while at it - remove needless parentheses while at it - add missing KERN_ level to ide_tape_probe() - other minor fixups Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-06ide-tape: fix syntax error in idetape_identify_device()Borislav Petkov
Spotted by Sergei Shtylyov. CC: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-06ide-tape: remove leftover OnStream support warningBorislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-06ide-tape: collect module-related macro calls at the endBorislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-06ide-tape: include proper headersBorislav Petkov
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-15 15:44:37 +0000