summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/ehca/ehca_irq.c
AgeCommit message (Collapse)Author
2012-08-20infiniband: ehca: Fix compiler warningsPaul E. McKenney
Fix comp_task() to return void to match smp_hotplug_thread's thread_fn member, and adjust indirection on the ->cpu_comp_threads per-CPU member of the ehca_comp_pool structure. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
2012-08-20infiniband: ehca: Fix while->do-while conversion typoPaul E. McKenney
This commit just adds a needed semicolon. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
2012-08-13infiniband: Ehca: Use hotplug thread infrastructureThomas Gleixner
Get rid of the hotplug notifiers and use the generic hotplug thread infrastructure. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20120716103948.775527032@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-02-25IB/ehca: Use kthread_create_on_node()Eric Dumazet
Since create_comp_task() creates percpu kthread, it makes sense to use kthread_create_on_node() to get proper NUMA affinity for kthread stack. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2010-05-27ehca: convert cpu notifier to return encapsulate errno valueAkinobu Mita
By the previous modification, the cpu notifier can return encapsulate errno value. This converts the cpu notifiers for ehca. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Cc: Christoph Raisch <raisch@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-02-12IB/ehca: Do not turn off irqs in tasklet contextAlexander Schmidt
The irq_spinlock is only taken in tasklet context, so it is safe not to disable hardware interrupts. Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-10-03this_cpu: Straight transformationsChristoph Lameter
Use this_cpu_ptr and __this_cpu_ptr in locations where straight transformations are possible because per_cpu_ptr is used with either smp_processor_id() or raw_smp_processor_id(). cc: David Howells <dhowells@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> cc: Ingo Molnar <mingo@elte.hu> cc: Rusty Russell <rusty@rustcorp.com.au> cc: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-05-13infiniband: Remove void castsJack Stone
Remove uneeded casts of void *. Signed-off-by: Jack Stone <jwjstone@fastmail.fm> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-01-16IB/ehca: Fix printk format warnings from u64 type changeStephen Rothwell
Commit fe333321 ("powerpc: Change u64/s64 to a long long integer type") changed u64 from unsigned long to unsigned long long, which means that printk formats for printing u64 values should use "ll" instead of "l" to avoid warnings. Fix all the places affected by this in ehca. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-30cpumask: use new cpumask API in drivers/infiniband/hw/ehcaRusty Russell
Impact: cleanup We're moving from handing around cpumask_t's to handing around struct cpumask *'s. cpus_*, cpumask_t and cpu_*_map are deprecated: convert to cpumask_*, cpu_*_mask. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Tested-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Cc: Christoph Raisch <raisch@de.ibm.com>
2008-12-30cpumask: use for_each_online_cpu() in drivers/infiniband/hw/ehca/ehca_irq.cRusty Russell
Impact: cleanup In future, accessing cpu numbers beyond nr_cpu_ids (the runtime limit) will be undefined. We can avoid future problems by using for_each_online_cpu() here. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Tested-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Cc: Christoph Raisch <raisch@de.ibm.com>
2008-11-11IB/ehca: Remove reference to special QP in case of port activation failureStefan Roscher
If the initialization of a special QP (e.g. AQP1) fails due to a software timeout, we have to remove the reference to that special QP struct from the port struct to stop the driver from accessing the QP, since it will be/has been destroyed by the caller, eg in this case ib_mad. Signed-off-by: Stefan Roscher <stefan.roscher@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: MAINTAINERS: Remove Glenn Streiff from NetEffect entry mlx4_core: Improve error message when not enough UAR pages are available IB/mlx4: Add support for memory management extensions and local DMA L_Key IB/mthca: Keep free count for MTT buddy allocator mlx4_core: Keep free count for MTT buddy allocator mlx4_code: Add missing FW status return code IB/mlx4: Rename struct mlx4_lso_seg to mlx4_wqe_lso_seg mlx4_core: Add module parameter to enable QoS support RDMA/iwcm: Remove IB_ACCESS_LOCAL_WRITE from remote QP attributes IPoIB: Include err code in trace message for ib_sa_path_rec_get() failures IB/sa_query: Check if sm_ah is NULL in ib_sa_remove_one() IB/ehca: Release mutex in error path of alloc_small_queue_page() IB/ehca: Use default value for Local CA ACK Delay if FW returns 0 IB/ehca: Filter PATH_MIG events if QP was never armed IB/iser: Add support for RDMA_CM_EVENT_ADDR_CHANGE event RDMA/cma: Add RDMA_CM_EVENT_TIMEWAIT_EXIT event RDMA/cma: Add RDMA_CM_EVENT_ADDR_CHANGE event
2008-07-22IB/ehca: Filter PATH_MIG events if QP was never armedJoachim Fenkes
Certain firmware versions sometimes cause spurious PATH_MIG events to occur during QP creation. Filter these events by making sure PATH_MIG events are only handed down when they actually make sense (i.e. when the QP has been armed at least once). Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-16Merge branch 'linus' into cpus4096Ingo Molnar
Conflicts: arch/x86/xen/smp.c kernel/sched_rt.c net/iucv/iucv.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-14IB/ehca: In case of lost interrupts, trigger EOI to reenable interruptsStefan Roscher
During corner case testing, we noticed that some versions of ehca do not properly transition to interrupt done in special load situations. This can be resolved by periodically triggering EOI through H_EOI, if EQEs are pending. Signed-off-by: Stefan Roscher <stefan.roscher@de.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-05-23infiniband: use performance variant for_each_cpu_mask_nrMike Travis
Change references from for_each_cpu_mask to for_each_cpu_mask_nr where appropriate Reviewed-by: Paul Jackson <pj@sgi.com> Reviewed-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-07IB/ehca: Wait for async events to finish before destroying QPStefan Roscher
This is necessary because, in a multicore environment, a race between uverbs async handler and destroy QP could occur. Signed-off-by: Stefan Roscher <stefan.roscher at de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-23IB/ehca: Move high-volume debug output to higher debug levelsJoachim Fenkes
Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-04IB/ehca: Update sma_attr also in case of disruptive config changeJoachim Fenkes
Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25IB/ehca: Add "port connection autodetect mode"Hoang-Nam Nguyen
This patch enhances ehca with a capability to "autodetect" the ports being connected physically. In order to utilize that function the module option nr_ports must be set to -1 (default is 2 - two ports). This feature is experimental and will made the default later. More detail: If the user connects only one port to the switch, current code requires 1) port one to be connected and 2) module option nr_ports=1 to be given. If autodetect is enabled, ehca will not wait at creation of the GSI QP for the respective port to become active. Since firmware does not accept modify_qp() while the port is down at initialization, we need to cache all calls to modify_qp() for the SMI/GSI QP and just return a good return code. When a port is activated and we get a PORT_ACTIVE event, we replay the cached modify-qp() parms and re-trigger any posted recv WRs. Only then do we forward the PORT_ACTIVE event to registered clients. The result of this autodetect patch is that all ports will be accessible by the users. Depending on their respective cabling only those ports that are connected properly will become operable. If a user tries to modify a regular QP of a non-connected port, modify_qp() will fail. Furthermore, ibv_devinfo should show the port state accordingly. Note that this patch primarily improves the loading behaviour of ehca. If the cable is removed while the driver is operating and plugged in again, firmware will handle that properly by sending an appropriate async event. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25IB/ehca: Forward event client-reregister-required to registered clientsHoang-Nam Nguyen
This patch allows ehca to forward event client-reregister-required to registered clients. One such event is generated by a switch eg. after its reboot. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IB/ehca: Misc cpuinit section annotations and #ifdef cleanupsSatyam Sharma
* Replace {un}register_cpu_notifier with {un}register_hotcpu_notifier thereby losing a couple of #ifdef HOTPLUG_CPU pairs. * Move comp_pool_callback_nb declaration to below that of callback function so that initialization of .notifier_call and .priority can occur at build time itself and not runtime. * Mark the notifier_block (and callback function, and another static function used by it) as __cpuinit{data} for the sake of consistency and remove enclosing #ifdef. (This may increase size for modular build of this module, however, because these are no longer dropped unconditionally now.) Signed-off-by: Satyam Sharma <satyam@infradead.org> Acked-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-10-09IB/ehca: Path migration supportJoachim Fenkes
Fix some modify_qp() issues related to path migration. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-31IB/ehca: SRQ fixes to enable IPoIB CMJoachim Fenkes
Fix ehca SRQ support so that IPoIB connected mode works: - Report max_srq > 0 if SRQ is supported - Report "last wqe reached" asynchronous event when base QP dies; this is required by the IB spec and IPoIB CM relies on receiving it when cleaning up. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-31in-string typos of "error"Eddy L O Jansson
One patch for two trivial typos of 'error' with three R's, appearing in message strings. There's a bunch more of the same in comments, not dealt with here. Signed-off-by: Eddy L O Jansson <eddy@klopper.net> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-20IB/ehca: Generate async event when SRQ limit reachedHoang-Nam Nguyen
Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-17IB/ehca: Fix warnings issued by checkpatch.plHoang-Nam Nguyen
Run the existing ehca code through checkpatch.pl and clean up the worst of the coding style violations. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ehca: Notify consumers of LID/PKEY/SM changes after nondisruptive eventsJoachim Fenkes
When firmware reports a nondisruptive port configuration change event, previous versions of the eHCA driver didn't forward the event to consumers like IPoIB. Add code that determines the type of configuration change by comparing old and new port attributes and reports it. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ehca: Change idr spinlocks into rwlocksJoachim Fenkes
This eliminates lock contention among IRQs as well as the need to disable IRQs around idr_find, because there are no IRQ writers. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-09IB/ehca: Refactor sync between completions and destroy_cq using atomic_tJoachim Fenkes
- ehca_cq.nr_events is made an atomic_t, eliminating a lot of locking. - The CQ is removed from the CQ idr first now to make sure no more completions are scheduled on that CQ. The "wait for all completions to end" code becomes much simpler this way. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-14IB/ehca: Remove _irqsave, move #ifdefJoachim Fenkes
- In ehca_process_eq(), we're IRQ safe throughout the whole function, so we don't need another _irqsave in the middle of flight. - take_over_work() is only called by comp_pool_callback(), so it can move into the same #ifdef block. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-05-09Add suspend-related notifications for CPU hotplugRafael J. Wysocki
Since nonboot CPUs are now disabled after tasks and devices have been frozen and the CPU hotplug infrastructure is used for this purpose, we need special CPU hotplug notifications that will help the CPU-hotplug-aware subsystems distinguish normal CPU hotplug events from CPU hotplug events related to a system-wide suspend or resume operation in progress. This patch introduces such notifications and causes them to be used during suspend and resume transitions. It also changes all of the CPU-hotplug-aware subsystems to take these notifications into consideration (for now they are handled in the same way as the corresponding "normal" ones). [oleg@tv-sign.ru: cleanups] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Gautham R Shenoy <ego@in.ibm.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-22IB/ehca: Make scaling code work without CPU hotplugJoachim Fenkes
eHCA scaling code must not depend on register_cpu_notifier() if CONFIG_HOTPLUG_CPU is not set, so put all related code into #ifdefs. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-01IB/ehca: Fix sync between completion handler and destroy cqHoang-Nam Nguyen
This patch fixes two issues reported by Roland Dreier and Christoph Hellwig: - Mismatched sync/locking between completion handler and destroy cq We introduced a counter nr_events per cq to track number of irq events seen. This counter is incremented when an event queue entry is seen and decremented after completion handler has been called regardless if scaling code is active or not. Note that nr_callbacks tracks number of events assigned to a cpu and both counters can potentially diverge. The sync between running completion handler and destroy cq is done by using the global spin lock ehca_cq_idr_lock. - Replace yield by wait_event on the counter above to become zero. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16IB/ehca: Allow en/disabling scaling code via module parameterHoang-Nam Nguyen
Allow users to en/disable scaling code when loading ib_ehca module, rather than requiring the module to be rebuilt to change the setting. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16IB/ehca: Fix race condition/locking issues in scaling codeHoang-Nam Nguyen
Fix a race condition in find_next_cpu_online() and some other locking issues in ehca scaling code. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16IB/ehca: Rework irq handlerHoang-Nam Nguyen
Rework ehca interrupt handling to avoid/reduce missed irq events. Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-10IB/ehca: Fix memleak on module unloadingAkinobu Mita
Percpu data is not freed on module unloading. Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Christoph Raisch <raisch@de.ibm.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-01-22IB/ehca: Fix mismatched spin_unlock in irq handlerHoang-Nam Nguyen
The lock is taken with _irqsave and hence must be released with _irqrestore on all paths. Signed-off-by Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-01-09IB/ehca: Use proper GFP_ flags for get_zeroed_page()Hoang-Nam Nguyen
Here is a patch for ehca to use proper flag, ie. GFP_ATOMIC resp. GFP_KERNEL, when calling get_zeroed_page() to prevent "Bug: scheduling while atomic...". This error does not cause a kernel panic but makes ipoib un-usable afterwards. It is reproducible on 2.6.20-rc4 if one does ifconfig down during a flood ping test. I have not observed this error in earlier releases incl. 2.6.20-rc1. This error occurs when a qp event/irq is received and ehca event handler allocates a control block/page to obtain HCA error data block. Use of GFP_ATOMIC when in interrupt context prevents this issue. Signed-off-by Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-11-09IB/ehca: Assure 4K alignment for firmware control blocksHoang-Nam Nguyen
Assure 4K alignment for firmware control blocks in 64K page mode, because kzalloc()'s result address might not be 4K aligned if 64K pages are enabled. Thus, we introduce wrappers called ehca_{alloc,free}_fw_ctrlblock(), which use a slab cache for objects with 4K length and 4K alignment in order to alloc/free firmware control blocks in 64K page mode. In 4K page mode those wrappers just are defines of get_zeroed_page() and free_page(). Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-09-22IB/ehca: Add driver for IBM eHCA InfiniBand adaptersHeiko J Schick
Add a driver for IBM GX bus InfiniBand adapters, which are usable with some pSeries/System p systems. Signed-off-by: Heiko J Schick <schickhj.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>