summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2006-06-25Merge branch 'for-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/iser: iSER Kconfig and Makefile IB/iser: iSER handling of memory for RDMA IB/iser: iSER RDMA CM (CMA) and IB verbs interaction IB/iser: iSER initiator iSCSI PDU and TX/RX IB/iser: iSCSI iSER transport provider high level code IB/iser: iSCSI iSER transport provider header file IB/uverbs: Remove unnecessary list_del()s IB/uverbs: Don't free wr list when it's known to be empty
2006-06-23[PATCH] VFS: Permit filesystem to override root dentry on mountDavid Howells
Extend the get_sb() filesystem operation to take an extra argument that permits the VFS to pass in the target vfsmount that defines the mountpoint. The filesystem is then required to manually set the superblock and root dentry pointers. For most filesystems, this should be done with simple_set_mnt() which will set the superblock pointer and then set the root dentry to the superblock's s_root (as per the old default behaviour). The get_sb() op now returns an integer as there's now no need to return the superblock pointer. This patch permits a superblock to be implicitly shared amongst several mount points, such as can be done with NFS to avoid potential inode aliasing. In such a case, simple_set_mnt() would not be called, and instead the mnt_root and mnt_sb would be set directly. The patch also makes the following changes: (*) the get_sb_*() convenience functions in the core kernel now take a vfsmount pointer argument and return an integer, so most filesystems have to change very little. (*) If one of the convenience function is not used, then get_sb() should normally call simple_set_mnt() to instantiate the vfsmount. This will always return 0, and so can be tail-called from get_sb(). (*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the dcache upon superblock destruction rather than shrink_dcache_anon(). This is required because the superblock may now have multiple trees that aren't actually bound to s_root, but that still need to be cleaned up. The currently called functions assume that the whole tree is rooted at s_root, and that anonymous dentries are not the roots of trees which results in dentries being left unculled. However, with the way NFS superblock sharing are currently set to be implemented, these assumptions are violated: the root of the filesystem is simply a dummy dentry and inode (the real inode for '/' may well be inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries with child trees. [*] Anonymous until discovered from another tree. (*) The documentation has been adjusted, including the additional bit of changing ext2_* into foo_* in the documentation. [akpm@osdl.org: convert ipath_fs, do other stuff] Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Nathan Scott <nathans@sgi.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-22IB/iser: iSER Kconfig and MakefileOr Gerlitz
Kconfig and Makefile for iSER. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-22IB/iser: iSER handling of memory for RDMAOr Gerlitz
This file contains the processing carried over an SG list associated with a SCSI command such that it can be registered with the IB verbs. The registration produces a network virtual address (VA) and a remote access key (RKEY or STAG in iSER spec notation) which are used by the target for its RDMA operation. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-22IB/iser: iSER RDMA CM (CMA) and IB verbs interactionOr Gerlitz
This file contains the low level interaction with the RDMA CM and the IB verbs, where iSER is consumer of both. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-22IB/iser: iSER initiator iSCSI PDU and TX/RXOr Gerlitz
This file contains the iSER initiator processing of iSCSI PDUs - controls, commands and data-outs along with processing of TX and RX completions. It interacts with the lower level iser code doing the memory registration and and the cma and verbs calls. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-22IB/iser: iSCSI iSER transport provider high level codeOr Gerlitz
This file contains the code that registeres with the iscsi transport manager and with the SCSI Mid Layer, where much of the provided functions to iSCSI and SCSI are implemented in libiscsi. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-22IB/iser: iSCSI iSER transport provider header fileOr Gerlitz
iSER (iSCSI Extensions for RDMA) transport provider driver for the iSCSI initiator, whose other parts (under drivers/scsi) are scsi_transport_iscsi - the transport management module, iscsi_tcp - the TCP transport provider module and libiscsi - a kernel library (module) implementing functionality needed by both TCP and iSER transports. iSER is both a provider of the iSCSI transport api and a SCSI low level driver. This file contains internal data structures and non static service functions. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-22IB/uverbs: Remove unnecessary list_del()sRoland Dreier
In ib_uverbs_cleanup_ucontext(), when iterating through the lists of objects, there's no reason to do list_del() to remove the objects, since both the objects and the lists that contain them are about to be freed anyway. Since list_del() is a moderately big inline function, getting rid of this extra work saves quite a bit of .text: add/remove: 0/0 grow/shrink: 1/2 up/down: 3/-217 (-214) function old new delta ib_uverbs_comp_handler 225 228 +3 ib_uverbs_async_handler 256 255 -1 ib_uverbs_close 905 689 -216 Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-22IB/uverbs: Don't free wr list when it's known to be emptyKrishna Kumar
In ib_uverbs_post_send(), move the "out:" label after the loop that frees the list of work requests, since the only place that jumps there is before any work requests could possibly be added to the list. This removes a compile warning: "is_ud might be used uninitialized in this function". Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (46 commits) IB/uverbs: Don't serialize with ib_uverbs_idr_mutex IB/mthca: Make all device methods truly reentrant IB/mthca: Fix memory leak on modify_qp error paths IB/uverbs: Factor out common idr code IB/uverbs: Don't decrement usecnt on error paths IB/uverbs: Release lock on error path IB/cm: Use address handle helpers IB/sa: Add ib_init_ah_from_path() IB: Add ib_init_ah_from_wc() IB/ucm: Get rid of duplicate P_Key parameter IB/srp: Factor out common request reset code IB/srp: Support SRP rev. 10 targets [SCSI] srp.h: Add I/O Class values IB/fmr: Use device's max_map_map_per_fmr attribute in FMR pool. IB/mthca: Fill in max_map_per_fmr device attribute IB/ipath: Add client reregister event generation IB/mthca: Add client reregister event generation IB: Move struct port_info from ipath to <rdma/ib_smi.h> IPoIB: Handle client reregister events IB: Add client reregister event type ...
2006-06-17[NET]: Add netif_tx_lockHerbert Xu
Various drivers use xmit_lock internally to synchronise with their transmission routines. They do so without setting xmit_lock_owner. This is fine as long as netpoll is not in use. With netpoll it is possible for deadlocks to occur if xmit_lock_owner isn't set. This is because if a printk occurs while xmit_lock is held and xmit_lock_owner is not set can cause netpoll to attempt to take xmit_lock recursively. While it is possible to resolve this by getting netpoll to use trylock, it is suboptimal because netpoll's sole objective is to maximise the chance of getting the printk out on the wire. So delaying or dropping the message is to be avoided as much as possible. So the only alternative is to always set xmit_lock_owner. The following patch does this by introducing the netif_tx_lock family of functions that take care of setting/unsetting xmit_lock_owner. I renamed xmit_lock to _xmit_lock to indicate that it should not be used directly. I didn't provide irq versions of the netif_tx_lock functions since xmit_lock is meant to be a BH-disabling lock. This is pretty much a straight text substitution except for a small bug fix in winbond. It currently uses netif_stop_queue/spin_unlock_wait to stop transmission. This is unsafe as an IRQ can potentially wake up the queue. So it is safer to use netif_tx_disable. The hamradio bits used spin_lock_irq but it is unnecessary as xmit_lock must never be taken in an IRQ handler. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17IB/uverbs: Don't serialize with ib_uverbs_idr_mutexRoland Dreier
Currently, all userspace verbs operations that call into the kernel are serialized by ib_uverbs_idr_mutex. This can be a scalability issue for some workloads, especially for devices driven by the ipath driver, which needs to call into the kernel even for datapath operations. Fix this by adding reference counts to the userspace objects, and then converting ib_uverbs_idr_mutex into a spinlock that only protects the idrs long enough to take a reference on the object being looked up. Because remove operations may fail, we have to do a slightly funky two-step deletion, which is described in the comments at the top of uverbs_cmd.c. This also still leaves ib_uverbs_idr_lock as a single lock that is possibly subject to contention. However, the lock hold time will only be a single idr operation, so multiple threads should still be able to make progress, even if ib_uverbs_idr_lock is being ping-ponged. Surprisingly, these changes even shrink the object code: add/remove: 23/5 grow/shrink: 4/21 up/down: 633/-693 (-60) Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/mthca: Make all device methods truly reentrantRoland Dreier
Documentation/infiniband/core_locking.txt says: All of the methods in struct ib_device exported by a low-level driver must be fully reentrant. The low-level driver is required to perform all synchronization necessary to maintain consistency, even if multiple function calls using the same object are run simultaneously. However, mthca's modify_qp, modify_srq and resize_cq methods are currently not reentrant. Add a mutex to the QP, SRQ and CQ structures so that these calls can be properly serialized. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/mthca: Fix memory leak on modify_qp error pathsRoland Dreier
Some error paths after the mthca_alloc_mailbox() call in mthca_modify_qp() just do a "return -EINVAL" without freeing the mailbox. Convert these returns to "goto out" to avoid leaking the mailbox storage. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/uverbs: Factor out common idr codeRoland Dreier
Factor out common code for adding a userspace object to an idr into a function idr_add_uobj(). This shrinks both the source and object code: add/remove: 1/0 grow/shrink: 0/6 up/down: 57/-220 (-163) function old new delta idr_add_uobj - 57 +57 ib_uverbs_create_ah 543 512 -31 ib_uverbs_create_srq 662 630 -32 ib_uverbs_reg_mr 737 699 -38 ib_uverbs_create_cq 639 600 -39 ib_uverbs_alloc_pd 485 446 -39 ib_uverbs_create_qp 1020 979 -41 Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/uverbs: Don't decrement usecnt on error pathsRoland Dreier
In error paths when destroying an object, uverbs should not decrement associated objects' usecnt, since ib_dereg_mr(), ib_destroy_qp(), etc. already do that. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/uverbs: Release lock on error pathGanapathi CH
If ibdev->alloc_ucontext() fails then ib_uverbs_get_context() does not unlock file->mutex before returning error. Signed-off by: Ganapathi CH <cganapathi@novell.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/cm: Use address handle helpersSean Hefty
Use new ib_init_ah_from_wc() and ib_init_ah_from_path() helper functions to clean up the IB CM. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/sa: Add ib_init_ah_from_path()Sean Hefty
Add a call to initialize address handle attributes given a path record. This is used by the CM, and would be useful for users of UD QPs. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB: Add ib_init_ah_from_wc()Sean Hefty
Add a function to initialize address handle attributes from a work completion. This functionality is duplicated by both verbs and the CM. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/ucm: Get rid of duplicate P_Key parameterSean Hefty
The P_Key is provided into a SIDR REQ in two places, once as a parameter, and again in the path record. Remove the P_Key as a parameter and always use the one given in the path record. This change has no practical effect on ABI functionality. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/srp: Factor out common request reset codeIshai Rabinovitz
Misc cleanups in ib_srp: 1) I think that it is more efficient to move the req entries from req_list to free_list in srp_reconnect_target (rather than rebuild the free_list). (In any case this code is shorter). 2) This allows us to reuse code in srp_reset_device and srp_reconnect_target and call a new function srp_reset_req. Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/srp: Support SRP rev. 10 targetsRamachandra K
There has been a change in the format of port identifiers between revision 10 of the SRP specification and the current revision 16A. Revision 10 specifies port identifier format as lower 8 bytes : GUID upper 8 bytes : Extension Whereas revision 16A specifies it as lower 8 bytes : Extension upper 8 bytes : GUID There are older targets (e.g. SilverStorm Virtual Fibre Channel Bridge) which conform to revision 10 of the SRP specification. The I/O class of revision 10 is 0xFF00 and the I/O class of revision 16A is 0x0100. For supporting older targets, this patch: 1) Adds a new optional target creation parameter "io_class". Default value of io_class is 0x0100 (i.e. revision 16A) 2) Uses the correct port identifier format for targets with IO class of 0xFF00 (i.e. conforming to revision 10) Signed-off-by: Ramachandra K <rkuchimanchi@silverstorm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/fmr: Use device's max_map_map_per_fmr attribute in FMR pool.Or Gerlitz
When creating a FMR pool, query the IB device and use the returned max_map_map_per_fmr attribute as for the max number of FMR remaps. If the device does not suport querying this attribute, use the original IB_FMR_MAX_REMAPS (32) default. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/mthca: Fill in max_map_per_fmr device attributeOr Gerlitz
Report the true max_map_per_fmr value from mthca_query_device(), taking into account the change in FMR remapping introduced by the Sinai performance optimization. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/ipath: Add client reregister event generationRoland Dreier
Generate a client reregister event instead of a LID change event when client reregister bit is set. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/mthca: Add client reregister event generationLeonid Arsh
Change the mthca snoop of MADs that set PortInfo to check if the SM has set the client reregister bit, and if it has, generate a client reregister event. If the bit is not set, just generate a LID change event as usual. Signed-off-by: Leonid Arsh <leonida@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB: Move struct port_info from ipath to <rdma/ib_smi.h>Leonid Arsh
Move ipath's struct port_info into <rdma/ib_smi.h>, so that it can be used by mthca to implement client reregister support. Remove the __attribute__((packed)) because all the members of the struct are naturally aligned anyway. Signed-off-by: Leonid Arsh <leonida@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IPoIB: Handle client reregister eventsLeonid Arsh
Handle client reregister events by treating them just like LID or SM changes -- flush all cached paths and rejoin multicast groups. Signed-off-by: Leonid Arsh <leonida@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IPoIB: Fix kernel unaligned access on ia64Jack Morgenstein
Fix misaligned access faults on ia64: never cast a misaligned neighbour->ha + 4 pointer to union ib_gid type; pass a void * pointer instead. The memcpy was being optimized to use full word accesses because the compiler thought that union ib_gid is always aligned. The cast in IPOIB_GID_ARG is safe, since it is fixed to access each byte separately. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IPoIB: Avoid using stale last_send counter when reaping AHsRoland Dreier
The comparisons of priv->tx_tail to ah->last_send in ipoib_free_ah() and ipoib_post_receive() are slightly unsafe, because priv->tx_lock is not held and hence a stale value of ah->last_send might be used, which would lead to freeing an AH before the driver was really done with it. The simple way to fix this is to the optimization of early free from ipoib_free_ah() and unconditionally queue AHs for reaping, and then take priv->tx_lock in __ipoib_reap_ah(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/mad: Check GID/LID when matching requestsJack Morgenstein
Check GID/LID for requester side when searching for request which matches received response. This is in order to guarantee uniqueness if the same TID is used when requesting via multiple source LIDs (when LMC is not zero). Use ports' cached LMC to perform the check. Further, do not perform LID check for direct-routed packets, since the permissive LID makes a proper check impossible. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB: Add caching of ports' LMCJack Morgenstein
Add an LMC cache to struct ib_device, and add a function ib_get_cached_lmc() to query the cache. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/cm: remove unneeded flush_workqueueMichael S. Tsirkin
destroy_workqueue() already does flush_workqueue(). Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com>
2006-06-17IB/ucm: convert semaphore to mutexSean Hefty
Convert semaphore in ib_ucm_file to a real mutex. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/srp: Get rid of "Target has req_lim 0" messagesRoland Dreier
It's perfectly valid for a connection to an SRP target to have a request limit of 0, so get rid of the message about it, which can spam kernel logs even with printk_ratelimit(). Keep a count of such events in a "zero_req_lim" SCSI host attribute instead, so someone who cares can look at the statistics. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/srp: Handle DREQ events from CMIshai Rabinovitz
Handle IB_CM_DREQ_ERROR and IB_CM_DREQ_RECEIVED events from the CM, instead of just printing "Unhandled CM event". In the case of DREQ_ERROR, just ignore the event -- a TIMEWAIT_EXIT will be generated also. For DREQ_RECEIVED, send a DREP in response to shut the connection down cleanly. Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/srp: Allow sg_tablesize to be adjustedVu Pham
Make the sg_tablesize used by SRP adjustable at module load time via a module parameter. Calculate the corresponding IU length required to support this. Signed-off-by: Vu Pham <vu@mellanox.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/srp: Allow cmd_per_lun to be set per target portVu Pham
Allow userspace to throttle traffic on a given connection to a target port by adding "max_cmd_per_lun=xyz" to lower the cmd_per_lun value set for that scsi_host. Signed-off-by: Vu Pham <vu@mellanox.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/srp: Clean up loop in srp_remove_one()Ishai Rabinovitz
Interrupts will always be enabled in srp_remove_one(), so spin_lock_irq() can be used instead of spin_lock_irqsave(). Also, the loop takes target->scsi_host->host_lock, so target->state can just be set to SRP_TARGET_REMOVED witout testing the old value. Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB: Make needlessly global ib_mad_cache staticRoland Dreier
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/srp: Change target_mutex to a spinlockMatthew Wilcox
The SRP driver never sleeps while holding target_mutex, and it's just used to protect some simple list operations, so hold times will be short. So just convert it to a spinlock, which is smaller and faster. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/srp: Get rid of unneeded use of list_for_each_entry_safe()Matthew Wilcox
list_for_each_entry_safe() is used in one place where the list isn't modified. So just change it to list_for_each_entry(). Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/srp: Use SCAN_WILD_CARD from SCSI headersMatthew Wilcox
SCAN_WILD_CARD is indeed available from <scsi/scsi.h>, which is already included. So get rid of private hack. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/mthca: Convert FW commands to use wait_for_completion_timeout()Roland Dreier
The kernel has had wait_for_completion_timeout() for a long time now. mthca should use it to handle FW commands timing out, instead of implementing the same thing in a much more complicated way by using wait_for_completion() along with a timer that does complete(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/srp: Use FMRs to map gather/scatter listsRoland Dreier
Create an SRP FMR pool on HCAs that support FMRs, and use FMRs to map gather/scatter lists that have more than one entry into a single memory region that appears virtually contiguous to the SRP target (which is the RDMA initiator). This patch bails out on FMR mapping for SCSI commands where the gather/scatter list cannot be mapped into a single FMR because there are sub-page-sized entries in middle of the list. An unaligned start or end of the list is OK. Based on a patch by Vu Pham <vuhuong@mellanox.com>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB/mthca: Remove dead codeMichael S. Tsirkin
Kill some dead code in mthca_eq.c Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB: IP address based RDMA connection managerSean Hefty
Kernel connection management agent over InfiniBand that connects based on IP addresses. The agent defines a generic RDMA connection abstraction to support clients wanting to connect over different RDMA devices. The agent also handles RDMA device hotplug events on behalf of clients. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-17IB: address translation to map IP toIB addresses (GIDs)Sean Hefty
Add an address translation service that maps IP addresses to InfiniBand GID addresses using IPoIB. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>