summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/nes: Fix test of uninitialized netdev
2011-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits) route: Take the right src and dst addresses in ip_route_newports ipv4: Fix nexthop caching wrt. scoping. ipv4: Invalidate nexthop cache nh_saddr more correctly. net: fix pch_gbe section mismatch warning ipv4: fix fib metrics mlx4_en: Removing HW info from ethtool -i report. net_sched: fix THROTTLED/RUNNING race drivers/net/a2065.c: Convert release_resource to release_region/release_mem_region drivers/net/ariadne.c: Convert release_resource to release_region/release_mem_region bonding: fix rx_handler locking myri10ge: fix rmmod crash mlx4_en: updated driver version to 1.5.4.1 mlx4_en: Using blue flame support mlx4_core: reserve UARs for userspace consumers mlx4_core: maintain available field in bitmap allocator mlx4: Add blue flame support for kernel consumers mlx4_en: Enabling new steering mlx4: Add support for promiscuous mode in the new steering model. mlx4: generalization of multicast steering. mlx4_en: Reporting HW revision in ethtool -i ...
2011-03-24RDMA/nes: Fix test of uninitialized netdevRoland Dreier
Commit 1765a575334f ("net: make dev->master general") introduced a test of an uninitialized netdev. Fix the code so the intended netdev is tested. Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-24Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB: Increase DMA max_segment_size on Mellanox hardware IB/mad: Improve an error message so error code is included RDMA/nes: Don't print success message at level KERN_ERR RDMA/addr: Fix return of uninitialized ret value IB/srp: try to use larger FMR sizes to cover our mappings IB/srp: add support for indirect tables that don't fit in SRP_CMD IB/srp: rework mapping engine to use multiple FMR entries IB/srp: allow sg_tablesize to be set for each target IB/srp: move IB CM setup completion into its own function IB/srp: always avoid non-zero offsets into an FMR
2011-03-23mlx4: generalization of multicast steering.Yevgeny Petrilin
The same packet steering mechanism would be used both for IB and Ethernet, Both multicasts and unicasts. This commit prepares the general infrastructure for this. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23mlx4_en: Reporting HW revision in ethtool -iYevgeny Petrilin
HW revision is derived from device ID and rev id. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-23Merge branches 'misc', 'nes' and 'srp' into for-nextRoland Dreier
2011-03-22IB: Increase DMA max_segment_size on Mellanox hardwareDavid Dillow
By default, each device is assumed to be able only handle 64 KB chunks during DMA. By giving the segment size a larger value, the block layer will coalesce more S/G entries together for SRP, allowing larger requests with the same sg_tablesize setting. The block layer is the only direct user of it, though a few IOMMU drivers reference it as well for their *_map_sg coalescing code. pci-gart_64 on x86, and a smattering on on sparc, powerpc, and ia64. Since other IB protocols could potentially see larger segments with this, let's check those: - iSER is fine, because you limit your maximum request size to 512 KB, so we'll never overrun the page vector in struct iser_page_vec (128 entries currently). It is independent of the DMA segment size, and handles multi-page segments already. - IPoIB is fine, as it maps each page individually, and doesn't use ib_dma_map_sg(). - RDS appears to do the right thing and has no dependencies on DMA segment size, but I don't claim to have done a complete audit. - NFSoRDMA and 9p are OK -- they do not use ib_dma_map_sg(), so they doesn't care about the coalescing. - Lustre's ko2iblnd does not care about coalescing -- it properly walks the returned sg list. This patch ups the value on Mellanox hardware to 1 GB, which matches reported firmware limits on mlx4. Signed-off-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-21Merge branch 'external-indirect' of ↵Roland Dreier
git://git.kernel.org/pub/scm/linux/kernel/git/dad/srp-initiator into srp
2011-03-18IB/mad: Improve an error message so error code is includedMichael Heinz
Signed-off-by: Michael Heinz <michael.heinz@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-18RDMA/nes: Don't print success message at level KERN_ERRRoland Dreier
There's no reason to print "NetEffect RNIC driver successfully loaded" at level KERN_ERR (where it will uglify the console on a quiet boot). Change it to KERN_INFO. Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-17Merge branch 'kvm-updates/2.6.39' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
* 'kvm-updates/2.6.39' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (55 commits) KVM: unbreak userspace that does not sets tss address KVM: MMU: cleanup pte write path KVM: MMU: introduce a common function to get no-dirty-logged slot KVM: fix rcu usage in init_rmode_* functions KVM: fix kvmclock regression due to missing clock update KVM: emulator: Fix permission checking in io permission bitmap KVM: emulator: Fix io permission checking for 64bit guest KVM: SVM: Load %gs earlier if CONFIG_X86_32_LAZY_GS=n KVM: x86: Remove useless regs_page pointer from kvm_lapic KVM: improve comment on rcu use in irqfd_deassign KVM: MMU: remove unused macros KVM: MMU: cleanup page alloc and free KVM: MMU: do not record gfn in kvm_mmu_pte_write KVM: MMU: move mmu pages calculated out of mmu lock KVM: MMU: set spte accessed bit properly KVM: MMU: fix kvm_mmu_slot_remove_write_access dropping intermediate W bits KVM: Start lock documentation KVM: better readability of efer_reserved_bits KVM: Clear async page fault hash after switching to real mode KVM: VMX: Initialize vm86 TSS only once. ...
2011-03-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (170 commits) [SCSI] scsi_dh_rdac: Add MD36xxf into device list [SCSI] scsi_debug: add consecutive medium errors [SCSI] libsas: fix ata list corruption issue [SCSI] hpsa: export resettable host attribute [SCSI] hpsa: move device attributes to avoid forward declarations [SCSI] scsi_debug: Logical Block Provisioning (SBC3r26) [SCSI] sd: Logical Block Provisioning update [SCSI] Include protection operation in SCSI command trace [SCSI] hpsa: fix incorrect PCI IDs and add two new ones (2nd try) [SCSI] target: Fix volume size misreporting for volumes > 2TB [SCSI] bnx2fc: Broadcom FCoE offload driver [SCSI] fcoe: fix broken fcoe interface reset [SCSI] fcoe: precedence bug in fcoe_filter_frames() [SCSI] libfcoe: Remove stale fcoe-netdev entries [SCSI] libfcoe: Move FCOE_MTU definition from fcoe.h to libfcoe.h [SCSI] libfc: introduce __fc_fill_fc_hdr that accepts fc_hdr as an argument [SCSI] fcoe, libfc: initialize EM anchors list and then update npiv EMs [SCSI] Revert "[SCSI] libfc: fix exchange being deleted when the abort itself is timed out" [SCSI] libfc: Fixing a memory leak when destroying an interface [SCSI] megaraid_sas: Version and Changelog update ... Fix up trivial conflicts due to whitespace differences in drivers/scsi/libsas/{sas_ata.c,sas_scsi_host.c}
2011-03-17RDMA/addr: Fix return of uninitialized ret valueSean Hefty
Commit b23dd4fe42b4 ("ipv4: Make output route lookup return rtable directly") resulted in leaving ret uninitialized, where it may later be returned. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-17mm: export __get_user_pagesHuang Ying
In most cases, get_user_pages and get_user_pages_fast should be used to pin user pages in memory. But sometimes, some special flags except FOLL_GET, FOLL_WRITE and FOLL_FORCE are needed, for example in following patch, KVM needs FOLL_HWPOISON. To support these users, __get_user_pages is exported directly. There are some symbol name conflicts in infiniband driver, fixed them too. Signed-off-by: Huang Ying <ying.huang@intel.com> CC: Andrew Morton <akpm@linux-foundation.org> CC: Michel Lespinasse <walken@google.com> CC: Roland Dreier <roland@kernel.org> CC: Ralph Campbell <infinipath@qlogic.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-03-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1480 commits) bonding: enable netpoll without checking link status xfrm: Refcount destination entry on xfrm_lookup net: introduce rx_handler results and logic around that bonding: get rid of IFF_SLAVE_INACTIVE netdev->priv_flag bonding: wrap slave state work net: get rid of multiple bond-related netdevice->priv_flags bonding: register slave pointer for rx_handler be2net: Bump up the version number be2net: Copyright notice change. Update to Emulex instead of ServerEngines e1000e: fix kconfig for crc32 dependency netfilter ebtables: fix xt_AUDIT to work with ebtables xen network backend driver bonding: Improve syslog message at device creation time bonding: Call netif_carrier_off after register_netdevice bonding: Incorrect TX queue offset net_sched: fix ip_tos2prio xfrm: fix __xfrm_route_forward() be2net: Fix UDP packet detected status in RX compl Phonet: fix aligned-mode pipe socket buffer header reserve netxen: support for GbE port settings ... Fix up conflicts in drivers/staging/brcm80211/brcmsmac/wl_mac80211.c with the staging updates.
2011-03-15IB/srp: try to use larger FMR sizes to cover our mappingsDavid Dillow
Now that we can get larger SG lists, we can take advantage of HCAs that allow us to use larger FMR sizes. In many cases, we can use up to 512 entries, so start there and work our way down. Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-03-15IB/srp: add support for indirect tables that don't fit in SRP_CMDDavid Dillow
This allows us to guarantee the ability to submit up to 8 MB requests based on the current value of SCSI_MAX_SG_CHAIN_SEGMENTS. While FMR will usually condense the requests into 8 SG entries, it is imperative that the target support external tables in case the FMR mapping fails or is not supported. We add a safety valve to allow targets without the needed support to reap the benefits of the large tables, but fail in a manner that lets the user know that the data didn't make it to the device. The user must add "allow_ext_sg=1" to the target parameters to indicate that the target has the needed support. If indirect_sg_entries is not specified in the modules options, then the sg_tablesize for the target will default to cmd_sg_entries unless overridden by the target options. Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-03-15IB/srp: rework mapping engine to use multiple FMR entriesDavid Dillow
Instead of forcing all of the S/G entries to fit in one FMR, and falling back to indirect descriptors if that fails, allow the use of as many FMRs as needed to map the request. This lays the groundwork for allowing indirect descriptor tables that are larger than can fit in the command IU, but should marginally improve performance now by reducing the number of indirect descriptors needed. We increase the minimum page size for the FMR pool to 4K, as larger pages help increase the coverage of each FMR, and it is rare that the kernel would send down a request with scattered 512 byte fragments. This patch also move some of the target initialization code afte the parsing of options, to keep it together with the new code that needs to allocate memory based on the options given. Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-03-15IB/srp: allow sg_tablesize to be set for each targetDavid Dillow
Different configurations of target software allow differing max sizes of the command IU. Allowing this to be changed per-target allows all targets on an initiator to get an optimal setting. We deprecate srp_sg_tablesize and replace it with cmd_sg_entries in preparation for allowing more indirect descriptors than can fit in the IU. Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-03-15IB/srp: move IB CM setup completion into its own functionDavid Dillow
This is to clean up prior to further changes. Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-03-15IB/srp: always avoid non-zero offsets into an FMRDavid Dillow
It is unclear exactly how this code works around Mellanox SRP targets, or if the problem is on the target side or in the HCA itself. In an abundance of caution, we should always enable the workaround. Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-03-15Merge branches 'cma', 'cxgb4', 'ipath' and 'qib' into for-nextRoland Dreier
2011-03-15RDMA/cma: Replace global lock in rdma_destroy_id() with id-specific oneSean Hefty
rdma_destroy_id currently uses the global rdma cm 'lock' to test if an rdma_cm_id has been bound to a device. This prevents an active address resolution callback handler from assigning a device to the rdma_cm_id after rdma_destroy_id checks for one. Instead, we can replace the use of the global lock around the check to the rdma_cm_id device pointer by setting the id state to destroying, then flushing all active callbacks. The latter is accomplished by acquiring and releasing the handler_mutex. Any active handler will complete first, and any newly scheduled handlers will find the rdma_cm_id in an invalid state. In addition to optimizing the current locking scheme, the use of the rdma_cm_id mutex is a more intuitive synchronization mechanism than that of the global lock. These changes are based on feedback from Doug Ledford <dledford@redhat.com> while he was trying to debug a crash in the rdma cm destroy path. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-15IB/cm: Cancel pending LAP message when exiting IB_CM_ESTABLISH stateSean Hefty
This problem was reported by Moni Shoua <monis@mellanox.com> and Amir Vadai <amirv@mellanox.com>: When destroying a cm_id from a context of a work queue and if the lap_state of this cm_id is IB_CM_LAP_SENT, we need to release the reference of this id that was taken upon the send of the LAP message. Otherwise, if the expected APR message gets lost, it is only after a long time that the reference will be released, while during that the work handler thread is not available to process other things. It turns out that we need to cancel any pending LAP messages whenever we transition out of the IB_CM_ESTABLISH state. This occurs when disconnecting - either sending or receiving a DREQ. It can also happen in a corner case where we receive a REJ message after sending an RTU, followed by a LAP. Add checks and cancel any outstanding LAP messages in these three cases. Canceling the LAP when sending a DREQ fixes the destroy problem reported by Moni. When a cm_id is destroyed in the IB_CM_ESTABLISHED state, it sends a DREQ to the remote side to notify the peer that the connection is going away. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-15IB/cm: Bump reference count on cm_id before invoking callbackSean Hefty
When processing a SIDR REQ, the ib_cm allocates a new cm_id. The refcount of the cm_id is initialized to 1. However, cm_process_work will decrement the refcount after invoking all callbacks. The result is that the cm_id will end up with refcount set to 0 by the end of the sidr req handler. If a user tries to destroy the cm_id, the destruction will proceed, under the incorrect assumption that no other threads are referencing the cm_id. This can lead to a crash when the cm callback thread tries to access the cm_id. This problem was noticed as part of a larger investigation with kernel crashes in the rdma_cm when running on a real time OS. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Acked-by: Doug Ledford <dledford@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-15RDMA/cma: Fix crash in request handlersSean Hefty
Doug Ledford and Red Hat reported a crash when running the rdma_cm on a real-time OS. The crash has the following call trace: cm_process_work cma_req_handler cma_disable_callback rdma_create_id kzalloc init_completion cma_get_net_info cma_save_net_info cma_any_addr cma_zero_addr rdma_translate_ip rdma_copy_addr cma_acquire_dev rdma_addr_get_sgid ib_find_cached_gid cma_attach_to_dev ucma_event_handler kzalloc ib_copy_ah_attr_to_user cma_comp [ preempted ] cma_write copy_from_user ucma_destroy_id copy_from_user _ucma_find_context ucma_put_ctx ucma_free_ctx rdma_destroy_id cma_exch cma_cancel_operation rdma_node_get_transport rt_mutex_slowunlock bad_area_nosemaphore oops_enter They were able to reproduce the crash multiple times with the following details: Crash seems to always happen on the: mutex_unlock(&conn_id->handler_mutex); as conn_id looks to have been freed during this code path. An examination of the code shows that a race exists in the request handlers. When a new connection request is received, the rdma_cm allocates a new connection identifier. This identifier has a single reference count on it. If a user calls rdma_destroy_id() from another thread after receiving a callback, rdma_destroy_id will proceed to destroy the id and free the associated memory. However, the request handlers may still be in the process of running. When control returns to the request handlers, they can attempt to access the newly created identifiers. Fix this by holding a reference on the newly created rdma_cm_id until the request handler is through accessing it. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Acked-by: Doug Ledford <dledford@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14IB/ipath: Don't reset disabled devicesNicolas Kaiser
The comment some lines above states that disabled devices must not reset. Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
2011-03-14IB/qib: Fix M_Key field in SubnGet and SubnGetResp MADsMitko Haralanov
Set the M_Key field in SubnGet and SugnGetResp MADs based on correctly interpreting the protection level specified in the M_KeyProtBits field. Signed-off-by: Mitko Haralanov <mitko@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14IB/qib: Set default LE2 value for active cables to 0Mitko Haralanov
For active and far-EQ cables use an LE2 value of 0 for improved SI. Signed-off-by: Mitko Haralanov <mitko@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14RDMA/cxgb4: Debugfs dump_qp() updatesSteve Wise
- Show whether the SQ is in onchip memory or not. - Dump both SQ and RQ QIDs. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14RDMA/cxgb4: Dispatch FATAL event on EEH errorsSteve Wise
This at least kicks the user mode applications that are watching for device events. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14RDMA/cxgb4: Use ULP_MODE_TCPDDPSteve Wise
Set the ULP mode for initial RDMA connection setup to the proper DDP mode. This avoids wasting some HW resources while in streaming mode. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14RDMA/cxgb4: Enable on-chip SQ support by defaultSteve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14RDMA/cxgb4: Do CIDX_INC updates every 1/16 CQ depth CQE reapsSteve Wise
This avoids the CIDX_INC overflow issue with T4A2 when running kernel RDMA applications. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14RDMA/cxgb4: Remove db_drop_taskSteve Wise
Unloading iw_cxgb4 can crash due to the unload code trying to use db_drop_task, which is uninitialized. So remove this dead code. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-14RDMA/cxgb4: Turn on delayed ACKSteve Wise
Set the default to on. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-03-12ipv6: Convert to use flowi6 where applicable.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12net: Put flowi_* prefix on AF independent members of struct flowiDavid S. Miller
I intend to turn struct flowi into a union of AF specific flowi structs. There will be a common structure that each variant includes first, much like struct sock_common. This is the first step to move in that direction. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12ipv4: Create and use route lookup helpers.David S. Miller
The idea here is this minimizes the number of places one has to edit in order to make changes to how flows are defined and used. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02ipv4: Make output route lookup return rtable directly.David S. Miller
Instead of on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01ipv4: Kill can_sleep arg to ip_route_output_flow()David S. Miller
This boolean state is now available in the flow flags. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01ipv4: Make final arg to ip_route_output_flow to be boolean "can_sleep"David S. Miller
Since that is what the current vague "flags" argument means. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24[SCSI] iser: export addr and portMike Christie
This pactch has iser export the address and port of the endpoint. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-22IB/qib: Return correct MAD when setting link width to 255Mitko Haralanov
Fix a bug which causes the driver to return incorrect MADs as a response to Set(PortInfo) which sets the link width to 0xFF or link speed to 0xF. Signed-off-by: Mitko Haralanov <mitko@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-02-19Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: Documentation/feature-removal-schedule.txt drivers/net/e1000e/netdev.c net/xfrm/xfrm_policy.c
2011-02-17Merge branches 'nes' and 'qib' into for-nextRoland Dreier
2011-02-17IB/qib: Prevent double completions after a timeout or RNR errorMike Marciniszyn
There is a double completion associated with error handling for RC QPs. The sequence is: - The do_rc_ack() routine fields an RNR nack and there are 0 rnr_retries configured on the QP. - qib_error_qp() stops the pending timer - qib_rc_send_complete() is called from sdma_complete() - qib_rc_send_complete() starts the timer because the msb of the psn just completed says an ack is needed. - a bunch of flushes occur as ipoib posts WQEs to an error'ed QP - rc_timeout() calls qib_restart_rc() - qib_restart_rc() calls qib_send_complete() with a IB_WC_RETRY_EXC_ERR on a wqe that has already been completed in the past The fix avoids starting the timer since another packet will never arrive. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-02-13net: make dev->master generalJiri Pirko
dev->master is now tightly connected to bonding driver. This patch makes this pointer more general and ready to be used by others. - netdev_set_master() - bond specifics moved to new function netdev_set_bond_master() - introduced netif_is_bond_slave() to check if device is a bonding slave Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>