summaryrefslogtreecommitdiffstats
path: root/drivers/input/touchscreen
AgeCommit message (Collapse)Author
2014-12-31Revert "Input: atmel_mxt_ts - use deep sleep mode when stopped"Linus Torvalds
This reverts commit 9d469d033d135d80742a4e39e6bbb4519dd5eee1. It breaks the Chromebook Pixel touchpad (and touchscreen). Reported-by: Dirk Hohndel <dirk@hohndel.org> Bisected-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nick Dyer <nick.dyer@itdev.co.uk> Cc: Benson Leung <bleung@chromium.org> Cc: Yufeng Shen <miletus@chromium.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer fixes from Dmitry Torokhov: "Fixes for v7 protocol for ALPS devices and few other driver fixes. Also users can request input events to be stamped with boot time timestamps, in addition to real and monotonic timestamps" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: hil_kbd - fix incorrect use of init_completion Input: alps - v7: document the v7 touchpad packet protocol Input: alps - v7: fix finger counting for > 2 fingers on clickpads Input: alps - v7: sometimes a single touch is reported in mt[1] Input: alps - v7: ignore new packets Input: evdev - add CLOCK_BOOTTIME support Input: psmouse - expose drift duration for IBM trackpoints Input: stmpe - bias keypad columns properly Input: stmpe - enforce device tree only mode mfd: stmpe: add pull up/down register offsets for STMPE Input: optimize events_per_packet count calculation Input: edt-ft5x06 - fixed a macro coding style issue Input: gpio_keys - replace timer and workqueue with delayed workqueue Input: gpio_keys - allow separating gpio and irq in device tree
2014-12-18Merge branch 'next' into for-linusDmitry Torokhov
Second round of input updates for 3.19.
2014-12-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: "Two new drivers for Elan hardware (for I2C touchpad and touchscreen found in several Chromebooks and other devices), a driver for Goodix touch panel, and small fixes to Cypress I2C trackpad and other input drivers. Also we switched to use __maybe_unused instead of gating suspend/ resume code with #ifdef guards to get better compile coverage" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (27 commits) Input: gpio_keys - fix warning regarding uninitialized 'button' variable Input: add support for Elan eKTH I2C touchscreens Input: gpio_keys - fix warning regarding uninitialized 'irq' variable Input: cyapa - use 'error' for error codes Input: cyapa - fix resuming the device Input: gpio_keys - add device tree support for interrupt only keys Input: amikbd - allocate temporary keymap buffer on the stack Input: amikbd - fix build if !CONFIG_HW_CONSOLE Input: lm8323 - missing error check in lm8323_set_disable() Input: initialize device counter variables with -1 Input: initialize input_no to -1 to avoid subtraction Input: i8042 - do not try to load on Intel NUC D54250WYK Input: atkbd - correct MSC_SCAN events for force_release keys Input: cyapa - switch to using managed resources Input: lifebook - use "static inline" instead of "inline" in lifebook.h Input: touchscreen - use __maybe_unused instead of ifdef around suspend/resume Input: mouse - use __maybe_unused instead of ifdef around suspend/resume Input: misc - use __maybe_unused instead of ifdef around suspend/resume Input: cap11xx - support for irq-active-high option Input: cap11xx - add support for various cap11xx devices ...
2014-12-15Input: edt-ft5x06 - fixed a macro coding style issueAsaf Vertz
Fixed a coding style error, macros with complex values should be enclosed in parentheses. Signed-off-by: Asaf Vertz <asaf.vertz@tandemg.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-15Merge branch 'next' into for-linusDmitry Torokhov
Prepare input updates for 3.19.
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-07Input: add support for Elan eKTH I2C touchscreensScott Liu
This driver supports Elan eKTH I2C touchscreen controllers. Note that these are using custom protocol, as opposed to other Elan parts that use HID-over-I2C and are supported by the standard HID-multitouch driver. Signed-off-by: Scott Liu <scott.liu@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-12-05input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PMRafael J. Wysocki
After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. The alternative of CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME may be replaced with CONFIG_PM too. Make these changes in 2 files under drivers/input/. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Ferruh Yigit <fery@cypress.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-11-03Merge branch 'platform/remove_owner' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next Remove all .owner fields from platform drivers
2014-11-02Input: touchscreen - use __maybe_unused instead of ifdef around suspend/resumeJingoo Han
Use __maybe_unused instead of ifdef guards around suspend/resume functions, in order to increase build coverage and fix build warnings. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A bunch of fixes for minor defects reported by Coverity, a few driver fixups and revert of i8042.nomux change so that we are once again enable active MUX mode if box claims to support it" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: i8042 - disable active multiplexing by default" Input: altera_ps2 - use correct type for irq return value Input: altera_ps2 - write to correct register when disabling interrupts Input: max77693-haptic - fix potential overflow Input: psmouse - remove unneeded check in psmouse_reconnect() Input: vsxxxaa - fix code dropping bytes from queue Input: ims-pcu - fix dead code in ims_pcu_ofn_reg_addr_store() Input: opencores-kbd - fix error handling Input: wm97xx - adapt parameters to tosa touchscreen. Input: i8042 - quirks for Fujitsu Lifebook A544 and Lifebook AH544 Input: stmpe-keypad - fix valid key line bitmask Input: soc_button_array - update calls to gpiod_get*()
2014-10-31Input: add driver for the Goodix touchpanelBastien Nocera
Add a driver for the Goodix touchscreen panel found in Onda v975w tablets. The driver is based off the Android driver gt9xx.c found in some Android code dumps, but now bears no resemblance to the original driver. The driver was tested on the aforementioned tablet. Signed-off-by: Bastien Nocera <hadess@hadess.net> Tested-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-24Input: wm97xx - adapt parameters to tosa touchscreen.Dmitry Eremin-Solenikov
Sharp SL-6000 (tosa) touchscreen needs wider limits to properly map all points on the screen. Expand ranges in abs_x and abs_y arrays according to the touchscreen area. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-20input: touchscreen: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull second round of input updates from Dmitry Torokhov: "Mostly simple bug fixes, although we do have one brand new driver for Microchip AR1021 i2c touchscreen. Also there is the change to stop trying to use i8042 active multiplexing by default (it is still possible to activate it via i8042.nomux=0 on boxes that implement it)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - add Thrustmaster as Xbox 360 controller vendor Input: xpad - add USB ID for Thrustmaster Ferrari 458 Racing Wheel Input: max77693-haptic - fix state check in imax77693_haptic_disable() Input: xen-kbdfront - free grant table entry in xenkbd_disconnect_backend Input: alps - fix v4 button press recognition Input: i8042 - disable active multiplexing by default Input: i8042 - add noloop quirk for Asus X750LN Input: synaptics - gate forcepad support by DMI check Input: Add Microchip AR1021 i2c touchscreen Input: cros_ec_keyb - add of match table Input: serio - avoid negative serio device numbers Input: avoid negative input device numbers Input: automatically set EV_ABS bit in input_set_abs_params Input: adp5588-keys - cancel workqueue in failure path Input: opencores-kbd - switch to using managed resources Input: evdev - fix EVIOCG{type} ioctl
2014-10-14input: edt-ft5x06: replace strnicmp with strncasecmpRasmus Villemoes
The kernel used to contain two functions for length-delimited, case-insensitive string comparison, strnicmp with correct semantics and a slightly buggy strncasecmp. The latter is the POSIX name, so strnicmp was renamed to strncasecmp, and strnicmp made into a wrapper for the new strncasecmp to avoid breaking existing users. To allow the compat wrapper strnicmp to be removed at some point in the future, and to avoid the extra indirection cost, do s/strnicmp/strncasecmp/g. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-11Merge tag 'v3.17' into nextDmitry Torokhov
Synchronize with mainline to bring in changes to Synaptics and i8042 drivers.
2014-10-09Input: Add Microchip AR1021 i2c touchscreenChristian Gmeiner
This patch adds support for the ar1021 i2c based touchscreen. The driver is quite simple and only supports the Touch Reporting Protocol. This is the final version for an RFC patch send a while ago. http://www.spinics.net/lists/linux-input/msg29419.html Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-09Merge tag 'gpio-v3.18-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO changes from Linus Walleij: "This is the bulk of GPIO changes for the v3.18 development cycle: - Increase the default ARCH_NR_GPIO from 256 to 512. This was done to avoid having a custom <asm/gpio.h> header for the x86 architecture - GPIO is custom and complicated enough as it is already! We want to move to a radix to store the descriptors going forward, and finally get rid of this fixed array size altogether. - Endgame patching of the gpio_remove() semantics initiated by Abdoulaye Berthe. It is not accepted by the system that the removal of a GPIO chip fails during eg reboot or shutdown, and therefore the return value has now painfully been refactored away. For special cases like GPIO expanders on a hot-pluggable bus like USB, we may later add some gpiochip_try_remove() call, but for the cases we have now, return values are moot. - Some incremental refactoring of the gpiolib core and ACPI GPIO library for more descriptor usage. - Refactor the chained IRQ handler set-up method to handle also threaded, nested interrupts and set up the parent IRQ correctly. Switch STMPE and TC3589x drivers to use this registration method. - Add a .irq_not_threaded flag to the struct gpio_chip, so that also GPIO expanders that block but are still not using threaded IRQ handlers. - New drivers for the ARM64 X-Gene SoC GPIO controller. - The syscon GPIO driver has been improved to handle the "DSP GPIO" found on the TI Keystone 2 SoC:s. - ADNP driver switched to use gpiolib irqchip helpers. - Refactor the DWAPB driver to support being instantiated from and MFD cell (platform device). - Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP, Xilinx and Crystalcove drivers. - Various minor fixes" * tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (52 commits) gpio: pch: Build context save/restore only for PM pinctrl: abx500: get rid of unused variable gpio: ks8695: fix 'else should follow close brace '}'' gpio: stmpe: add verbose debug code gpio: stmpe: fix up interrupt enable logic gpio: staticize xway_stp_init() gpio: handle also nested irqchips in the chained handler set-up gpio: set parent irq on chained handlers gpiolib: irqchip: use irq_find_mapping while removing irqchip gpio: crystalcove: support virtual GPIO pinctrl: bcm281xx: make Kconfig dependency more strict gpio: kona: enable only on BCM_MOBILE or for compile testing gpio, bcm-kona, LLVMLinux: Remove use of __initconst gpio: Fix ngpio in gpio-xilinx driver gpio: dwapb: fix pointer to integer cast gpio: xgene: Remove unneeded #ifdef CONFIG_OF guard gpio: xgene: Remove unneeded forward declation for struct xgene_gpio gpio: xgene: Fix missing spin_lock_init() gpio: ks8695: fix switch case indentation gpiolib: add irq_not_threaded flag to gpio_chip ...
2014-09-18driver:gpio remove all usage of gpio_remove retval in driverabdoulaye berthe
this remove all reference to gpio_remove retval in all driver except pinctrl and gpio. the same thing is done for gpio and pinctrl in two different patches. Signed-off-by: Abdoulaye Berthe <berthe.ab@gmail.com> Acked-by: Michael Büsch <m@bues.ch> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-10Input: atmel_mxt_ts - fix double free of input deviceStephen Warren
[Nick Dyer: reworked to move free of input device into separate function and only call in paths that require it.] Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-09Input: atmel_mxt_ts - downgrade warning about empty interruptsNick Dyer
In the case where the CHG/interrupt line mode is not configured correctly, this warning is output to dmesg output for each interrupt. Downgrade the message to debug. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-09Input: wm971x - fix typo in module parameter descriptionMasanari Iida
Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-14Merge branch 'next' into for-linusDmitry Torokhov
Prepare second round of input updates for 3.17.
2014-08-13Input: edt-ft5x06 - remove superfluous assignmentMaks Naumov
Somehow we ended up with a duplicate line in edt_ft5x06_register_write() Signed-off-by: Maks Naumov <maksqwe1@ukr.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-13Input: atmel_mxt_ts - fix a few issues reported by CoverityDmitry Torokhov
This should fix the following issues reported by Coverity: *** CID 1230625: Logically dead code (DEADCODE) /drivers/input/touchscreen/atmel_mxt_ts.c: 1692 in mxt_initialize() *** CID 1230627: Missing break in switch (MISSING_BREAK) /drivers/input/touchscreen/atmel_mxt_ts.c: 1436 in mxt_get_object_table() *** CID 1230629: Out-of-bounds write (OVERRUN) /drivers/input/touchscreen/atmel_mxt_ts.c: 1267 in mxt_update_cfg() *** CID 1230632: Unused pointer value (UNUSED_VALUE) /drivers/input/touchscreen/atmel_mxt_ts.c: 1211 in mxt_update_cfg() Acked-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-13Input: atmel_mxt_ts - split config update a bitDmitry Torokhov
Let's split config update code a bit so it is hopefully a bit easier to read. Also, the firmware update callback should be the entity releasing firmware blob, not lower layers. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
2014-08-13Input: atmel_mxt_ts - simplify mxt_initialize a bitDmitry Torokhov
I think having control flow with 2 goto/labels/flags is quite hard to read, this version is a bit more readable IMO. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
2014-08-07Input: atmel_mxt_ts - mXT224 DMA quirk was fixed in firmware v2.0.AANick Dyer
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-06Merge branch 'next' into for-linusDmitry Torokhov
Prepare first round of input updates for 3.17.
2014-07-31Input: jornada720_ts - get rid of space indentation and use tabPramod Gurav
Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-31Input: jornada720_ts - switch to using managed resourcesPramod Gurav
This switches the driver to using managed resources to simplify error handling and to do away with remove function. Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-30Input: mcs5000_ts - remove ifdef around power management methodsFabio Estevam
We can annonate the suspend/resume functions with '__maybe_unused' and get rid of the ifdef, which makes the code smaller and simpler. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-30Input: mcs5000_ts - protect PM functions with CONFIG_PM_SLEEPFabio Estevam
When a kernel has CONFIG_PM=y and CONFIG_PM_SLEEP=n the following warnings are seen: drivers/input/touchscreen/mcs5000_ts.c:252:12: warning: 'mcs5000_ts_suspend' defined but not used [-Wunused-function] static int mcs5000_ts_suspend(struct device *dev) ^ drivers/input/touchscreen/mcs5000_ts.c:262:12: warning: 'mcs5000_ts_resume' defined but not used [-Wunused-function] static int mcs5000_ts_resume(struct device *dev) Protect the suspend/resume functions with CONFIG_PM_SLEEP in order to fix these build warnings. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-30Input: ads7846 - release resources on failure for clean exitPramod Gurav
Input device must be released(input_free_device) when ads7846_probe_dt fails. This fixes the same by releasing resources on failure. Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-28Input: atmel_mxt_ts - use deep sleep mode when stoppedNick Dyer
By writing zero to both the active and idle cycle times the maXTouch device is put into a deep sleep mode when it consumes minimal power. It is unnecessary to change the configuration of any other objects (for example to disable T9 touchscreen). It is counterproductive to reset the chip on resume, it will result in a long delay. However it is necessary to issue a calibrate command after the chip has spent any time in deep sleep. This patch also deals with the situation where the power configuration is zero on probe, which would mean that the device never wakes up to execute commands. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-28Input: pixcir_i2c_ts - add device tree supportRoger Quadros
Provide device tree support and binding information. Also provide support for a new chip "pixcir_tangoc". Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-28Input: pixcir_i2c_ts - support up to 5 fingers and hardware tracking IDsRoger Quadros
Some variants of the Pixcir touch controller support up to 5 simultaneous fingers and hardware tracking IDs. Prepare the driver for that. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-28Input: pixcir_i2c_ts - use Type-B Multi-Touch protocolRoger Quadros
Switch to using the Type-B Multi-Touch protocol. Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-24Input: ipaq-micro-ts - introduce open/closeDmitry Torokhov
Wire up open/close so we do not try to send events until someone uses them; this also allows us to remove micro_ts_remove() and rely fully on managed resources. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-24Input: driver for touchscreen on iPaq h3xxxDmitry Artamonow
This adds a driver for the touchscreen connected to the Atmel microcontroller on the iPAQ h3xxx series. Based on a driver from handhelds.org 2.6.21 kernel, written by Alessandro GARDICH, with the bulk of the code for the new input architecture rewritten by Dmitry Atamonow, and the final polish by Linus Walleij. Signed-off-by: Alessandro GARDICH <gremlin@gremlin.it> Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-24Merge tag 'v3.16-rc6' into nextDmitry Torokhov
Merge with mainline to bring in changes to MFD to allow merging ipaq-micro-ts driver.
2014-07-23Input: atmel_mxt_ts - implement T44 message handlingNick Dyer
maXTouch chips allow the reading of multiple messages in a single I2C transaction, which reduces bus overhead and improves performance/latency. The number of messages available to be read is given by the value in the T44 object which is located directly before the T5 object. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - split message handler into separate functionsNick Dyer
This is in preparation for support of the T44 message count object. Also, cache T5 address to avoid lookup on every interrupt cycle. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - decode T6 status messagesNick Dyer
By storing the previous T6 status byte multiple debug output of the same status can be suppressed (for example CFGERR). Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - add support for dynamic message sizeNick Dyer
The T5 object may have various sizes depending on the objects used on the particular maXTouch chip and firmware version, therefore it can't be hardcoded in the driver. Allocate a buffer on probe instead. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - recover from bootloader on probeNick Dyer
The MXT device may be in bootloader mode on probe, due to: 1) APP CRC failure, either: a) flash corruption b) bad power or other intermittent problem while checking CRC 2) If the device has been reset 10 or more times without accessing comms 3) Warm probe, device was in bootloader mode already This code attempts to recover from 1(b) and 3. There is an additional complexity: we have to try two possible bootloader addresses because the mapping is not one-to-one and we don't know the exact model yet. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - add bootloader addresses for new chipsNick Dyer
Later chips (for example mXT1664S) different mappings for bootloader addresses. This means that we must look at the family ID to determine which address to use. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-23Input: atmel_mxt_ts - handle bootloader previously unlockedNick Dyer
On a warm probe, the device might be in a state where an flash operation was not completed. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-19 13:13:00 +0000