summaryrefslogtreecommitdiffstats
path: root/drivers/input
AgeCommit message (Collapse)Author
2011-05-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wm831x-ts - move BTN_TOUCH reporting to data transfer Input: wm831x-ts - allow IRQ flags to be specified Input: wm831x-ts - fix races with IRQ management
2011-04-27Input: wm831x-ts - move BTN_TOUCH reporting to data transferMark Brown
Don't report BTN_TOUCH until we've got data as some less robust applications can be confused by getting a touch event by itself and it doesn't seem unreasonable for them to expect coordinates along with a touch. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27Input: wm831x-ts - allow IRQ flags to be specifiedMark Brown
This allows maximum flexibility for configuring the direct GPIO based interrupts. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-27Input: wm831x-ts - fix races with IRQ managementMark Brown
If the WM831x pen down and data IRQs run in parallel it is possible for the data and pen down IRQs to deadlock themselves as one is part way through disabling its operation while the other is part way through enabling. Fix this by always disabling the pen down interrupt while data is active and vice versa. When a changeover is required we disable the IRQ that is to be stopped then schedule work that will enable the new IRQ. We need to handle the data flow in the data IRQ as the readback from the device needs to be ordered correctly with the IRQ for robust operation. This also fixes an issue when using the built in IRQs due to enable_irq() not being valid from interrupt context on an interrupt controller with bus operations like the built in IRQ controller - this issue may also have affected other interrupt controllers. We can't rely on having the data and pen down IRQs available via GPIOs on the CPU on every system. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xen-kbdfront - fix mouse getting stuck after save/restore Input: estimate number of events per packet Input: evdev - indicate buffer overrun with SYN_DROPPED Input: document event types and codes and their intended use Input: add KEY_IMAGES specifically for AL Image Browser Input: twl4030_keypad - fix potential NULL dereference in twl4030_kp_probe() Input: h3600_ts - fix error handling at connect Input: twl4030_keypad - avoid potential NULL-pointer dereference
2011-04-18Input: xen-kbdfront - fix mouse getting stuck after save/restoreIgor Mammedov
Mouse gets "stuck" after restore of PV guest but buttons are in working condition. If driver has been configured for ABS coordinates at start it will get XENKBD_TYPE_POS events and then suddenly after restore it'll start getting XENKBD_TYPE_MOTION events, that will be dropped later and they won't get into user-space. Regression was introduced by hunk 5 and 6 of 5ea5254aa0ad269cfbd2875c973ef25ab5b5e9db ("Input: xen-kbdfront - advertise either absolute or relative coordinates"). Driver on restore should ask xen for request-abs-pointer again if it is available. So restore parts that did it before 5ea5254. Acked-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Igor Mammedov <imammedo@redhat.com> [v1: Expanded the commit description] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-18Input: estimate number of events per packetJeff Brown
Calculate a default based on the number of ABS axes, REL axes, and MT slots for the device during input device registration. Signed-off-by: Jeff Brown <jeffbrown@android.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-12Input: evdev - indicate buffer overrun with SYN_DROPPEDJeff Brown
Add a new EV_SYN code, SYN_DROPPED, to inform the client when input events have been dropped from the evdev input buffer due to a buffer overrun. The client should use this event as a hint to reset its state or ignore all following events until the next packet begins. Signed-off-by: Jeff Brown <jeffbrown@android.com> [dtor@mail.ru: Implement Henrik's suggestion and drop old events in case of overflow.] Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-11Input: twl4030_keypad - fix potential NULL dereference in twl4030_kp_probe()Axel Lin
We should first check whether platform data is NULL or not, before dereferencing it to get the keymap. Signed-off-by: Axel Lin <axel.lin@gmail.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-07Merge branch 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6Linus Torvalds
* 'for-linus2' of git://git.profusion.mobi/users/lucas/linux-2.6: Fix common misspellings
2011-04-06Input: h3600_ts - fix error handling at connectChristoph Fritz
In case of an error in h3600ts_connect(), deconstruct in correct order and with the right calls. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-06Input: twl4030_keypad - avoid potential NULL-pointer dereferenceShubhrajyoti D
Signed-off-by: Shubhrajyoti D <a0393217@india.ti.com> Acked-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-05Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: rpckbd - fix a leak of the IRQ during init failure Input: wacom - add support for Lenovo tablet ID (0xE6) Input: i8042 - downgrade selftest error message to dbg() Input: synaptics - fix crash in synaptics_module_init() Input: spear-keyboard - fix inverted condition in interrupt handler Input: uinput - allow for 0/0 min/max on absolute axes. Input: sparse-keymap - report KEY_UNKNOWN for unknown scan codes Input: sparse-keymap - report scancodes with key events Input: h3600_ts_input - fix a spelling error Input: wacom - report resolution for pen devices Input: wacom - constify wacom_features for a new missed Bamboo models
2011-04-02Input: rpckbd - fix a leak of the IRQ during init failureAxel Lin
In rpckbd_open prror path, free_irq() was using NULL rather than the driver data as the data pointer so free_irq() wouldn't have matched. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-31Input: wacom - add support for Lenovo tablet ID (0xE6)Manoj Iyer
Signed-off-by: Manoj Iyer <manoj.iyer@canonical.com> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31Input: i8042 - downgrade selftest error message to dbg()Paul Bolle
On a "really fragile" laptop I noticed a single i8042.c: i8042 controller selftest failed. (0x1 != 0x55) error in the log. But there's no reason to print this message at KERN_ERR level each time that loop fails, especially since the message telling about the overall selftest failure is printed at KERN_INFO level (on X86). Add an actual error message for non-X86 systems, where a selftest failure is (apparently) more serious. Remove a space in an another error message. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-31Input: synaptics - fix crash in synaptics_module_init()Jan Beulich
'struct dmi_system_id' arrays must always have a terminator to keep dmi_check_system() from looking at data (and possibly crashing) it isn't supposed to look at. The issue went unnoticed until ef8313bb1a22e7d2125d9d758aa8a81f1de91d81, but was introduced about a year earlier with 7705d548cbe33f18ea7713b9a07aa11047aaeca4 (which also similarly changed lifebook.c, but the problem there got eliminated shortly afterwards). The first hunk therefore is a stable candidate back to 2.6.33, while the full change is needed only on 2.6.38. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-31Input: spear-keyboard - fix inverted condition in interrupt handlerRajeev Kumar
We should return IRQ_NONE from interrupt handler in case keyboard does not report DATA_AVAIL condition. Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-31Input: uinput - allow for 0/0 min/max on absolute axes.Peter Hutterer
Some devices provide absolute axes with min/max of 0/0 (e.g. wacom's ABS_MISC axis). Current uinput restrictions do not allow duplication of these devices and require hacks in userspace to work around this. If the kernel accepts physical devices with a min/max of 0/0, uinput shouldn't disallow the same range. Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-29drivers: Final irq namespace conversionThomas Gleixner
Scripted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28Input: sparse-keymap - report KEY_UNKNOWN for unknown scan codesSeth Forshee
This allows for debugging non-functional keys easily from userspace. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-28Input: sparse-keymap - report scancodes with key eventsSeth Forshee
Scancodes are useful debugging aids when incorrect keycodes are being sent, as is common with laptop hotkeys. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-26Input: h3600_ts_input - fix a spelling errorSylvestre Ledru
Signed-off-by: Sylvestre Ledru <sylvestre.ledru@scilab.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-26Input: wacom - report resolution for pen devicesPing Cheng
Touch resolution is reported to the userland by retrieving the value from the HID descriptor. But pen resolution is not since it can not be retrieved. The current Wacom X driver has a resolution table. To centralize the source of these values, the resolution entries are added in the wacom_features struct for x and y coordinates respectively. The values are then reported to the userland. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-26Input: wacom - constify wacom_features for a new missed Bamboo modelsPing Cheng
Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: tsc2005 - fix locking issue Input: tsc2005 - use relative jiffies to schedule the watchdog Input: tsc2005 - driver should depend on GENERIC_HARDIRQS
2011-03-23Input: tsc2005 - fix locking issueAaro Koskinen
Commit 0b950d3 (Input: tsc2005 - add open/close) introduced a locking issue with the ESD watchdog: __tsc2005_disable() is calling cancel_delayed_work_sync() with mutex held, and the work also needs the same mutex. Fix the problem by using mutex_trylock() in tsc2005_esd_work(). If the mutex is taken, we know we are in the middle of disable or enable and the watchdog check can be skipped. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-23Input: tsc2005 - use relative jiffies to schedule the watchdogAaro Koskinen
Use relative jiffies to schedule the watchdog. Otherwise it will run like a mad one. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-23Input: tsc2005 - driver should depend on GENERIC_HARDIRQSGeert Uytterhoeven
drivers/input/touchscreen/tsc2005.c: In function ‘tsc2005_probe’: drivers/input/touchscreen/tsc2005.c:666: error: implicit declaration of function ‘set_irq_wake’ In addition, migrate from set_irq_wake() (marked "do not use" as of commit a0cd9ca2b907d7ee26575e7b63ac92dad768a75e ("genirq: Namespace cleanup")) to irq_set_irq_wake(). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-23mfd: Adopt mfd_data in 88pm860x input driverHaojian Zhuang
Copy 88pm860x platform data into different mfd_data structure for onkey/touch/codec/power driver. So move the identification of device node from those drivers to mfd driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: mfd_cell is now implicitly available to twl4030 driversAndres Salomon
The cell's platform_data is now accessed with a helper function; change clients to use that, and remove the now-unused data_size. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (64 commits) Input: tsc2005 - remove 'disable' sysfs attribute Input: tsc2005 - add open/close Input: tsc2005 - handle read errors from SPI layer Input: tsc2005 - do not rearm timer in hardirq handler Input: tsc2005 - don't use work for 'pen up' handling Input: tsc2005 - do not use 0 in place of NULL Input: tsc2005 - use true/false for boolean variables Input: tsc2005 - hide selftest attribute if we can't reset Input: tsc2005 - rework driver initialization code Input: tsc2005 - set up bus type in input device Input: tsc2005 - set up parent device Input: tsc2005 - clear driver data after unbinding Input: tsc2005 - add module description Input: tsc2005 - remove driver banner message Input: tsc2005 - remove incorrect module alias Input: tsc2005 - convert to using dev_pm_ops Input: tsc2005 - use spi_get/set_drvdata() Input: introduce tsc2005 driver Input: xen-kbdfront - move to drivers/input/misc Input: xen-kbdfront - add grant reference for shared page ...
2011-03-18Merge branch 'next' into for-linusDmitry Torokhov
2011-03-17Merge branches 'defcfg', 'drivers' and 'cyberpro-next' of ↵Linus Torvalds
master.kernel.org:/home/rmk/linux-2.6-arm * 'defcfg' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6647/1: add Versatile Express defconfig ARM: 6644/1: mach-ux500: update the U8500 defconfig * 'drivers' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6764/1: pl011: factor out FIFO to TTY code ARM: 6763/1: pl011: add optional RX DMA to PL011 v2 ARM: 6758/1: amba: support pm ops ARM: amba: make amba_driver id_table const ARM: amba: make internal ID table handling const ARM: amba: make probe() functions take const id tables ARM: 6662/1: amba: make amba_bustype non-static ARM: mmci: add dmaengine-based DMA support ARM: mmci: no need for separate host->data_xfered ARM: mmci: avoid unnecessary switch to data available PIO interrupts ARM: mmci: no need to call flush_dcache_page() with sg_miter API ARM: mmci: avoid reporting too many completed bytes on fifo overrun ALSA: AACI: make fifo variables more explanitory ALSA: AACI: no need to call snd_pcm_period_elapsed() for each period ALSA: AACI: use snd_pcm_lib_period_bytes() ALSA: AACI: clean up AACI announcement printk ALSA: AACI: fix channel mask selection ALSA: AACI: fix number of channels for record ALSA: AACI: fix multiple IRQ claiming * 'cyberpro-next' of master.kernel.org:/home/rmk/linux-2.6-arm: VIDEO: cyberpro: remove unused cyber2000fb_get_fb_var() VIDEO: cyberpro: remove useless function extreg pointers VIDEO: cyberpro: update handling of device structures VIDEO: cyberpro: add support for video capture I2C VIDEO: cyberpro: make 'reg_b0_lock' always present VIDEO: cyberpro: add I2C support VIDEO: cyberpro: select lowest multipler/divisor for PLL
2011-03-17Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32: (40 commits) unicore32: rewrite arch-specific tlb.h to use asm-generic version unicore32: modify io_p2v and io_v2p macros, and adjust PKUNITY_mmio_BASEs unicore32: replace unicore32-specific iomap functions with generic lib implementation unicore32 machine related: add frame buffer driver for pkunity-v3 soc unicore32 machine related files: add i2c bus drivers for pkunity-v3 soc unicore32 io: redefine __REG(x) and re-use readl/writel funcs unicore32 i8042 upgrade and bugfix: adjust resource request region type unicore32 upgrade to v2.6.38-rc5: add one more paramter for pte_alloc_map call unicore32 i8042: adjust io funcs of i8042-unicore32io.h unicore32: rename PKUNITY_IOSPACE_BASE to PKUNITY_MMIO_BASE unicore32: modify function names and parameters for irq_chips unicore32: remove unused lines in arch/unicore32/include/asm/irq.h unicore32 time.c: change calculate method for clock_event_device unicore32: ADD MAINTAINER for unicore32 architecture unicore32 machine related files: ps2 driver unicore32 machine related files: pci bus handling unicore32 machine related files: hardware registers unicore32 machine related files: core files unicore32 additional architecture files: boot process unicore32 additional architecture files: low-level lib: misc ... Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-03-17Merge branches 'aaci', 'mmci-dma', 'pl' and 'pl011' into driversRussell King
2011-03-16Merge branch 'tsc2005' into nextDmitry Torokhov
2011-03-16Input: tsc2005 - remove 'disable' sysfs attributeDmitry Torokhov
I believe that enable/disable functionality should not be implemented on the individual driver level but rather in device core, potentially reusing parts of PM framework. Therefore the driver-specific "disable" attribute is removed from the mainline driver. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - add open/closeDmitry Torokhov
Introduce open and close methods for the input device to keep the device powered down when it is not in use. Also rework interaction between interrupt thread and starting/shutting off/resetting the device: instead of taking a mutex in the intterrupt thread and elsewhere disable interrupts before transitioning the device in a new state. The ESD handling is also separated from the IRQ thread; we poll regularly at a given interval and simply skip reads if we see that valid interrupt happened not so long ago. This allows us not cancel and reschedule ESD work from interrupt context all the time. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - handle read errors from SPI layerDmitry Torokhov
Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - do not rearm timer in hardirq handlerDmitry Torokhov
We will most likely rearm it yet again the IRQ thread so doing it here is pointless. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - don't use work for 'pen up' handlingDmitry Torokhov
We do not need process context to send input events so let's switch to a regular timer. I am going to get rid of taking ts->mutex in tsc2005_irq_thread() later. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - do not use 0 in place of NULLDmitry Torokhov
Sparse in unhappy when people use 0 instead of NULL for pointers so let's rework the way we initialize spi_transfer structure in tsc2005_cmd() and tsc2005_write(). Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - use true/false for boolean variablesDmitry Torokhov
Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - hide selftest attribute if we can't resetDmitry Torokhov
If implementation to perform self-test/reset has not been provided by the platform code hide 'selftest' sysfs attribute instead of returning error when someone tries to use it. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - rework driver initialization codeDmitry Torokhov
We need to make sure we have time/work initialized before requesting and enabling interrupts, otherwise we might start using them way too early. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - set up bus type in input deviceDmitry Torokhov
We know what bus we are residing on (SPI) so let's make this data available to the users. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - set up parent deviceDmitry Torokhov
Set up SPI device as parent of the input device so it gets placed into proper place in sysfs tree. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-03-16Input: tsc2005 - clear driver data after unbindingDmitry Torokhov
We should not leave garbage pointers in driver structure after we unbind it from the device or if bind fails. Tested-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>