summaryrefslogtreecommitdiffstats
path: root/drivers/input
AgeCommit message (Collapse)Author
2012-05-10Input: ALPS - switch to using input_mt_report_finger_countDmitry Torokhov
Instead of open-coded reporting number of fingers on the touchpad let's use input_mt_report_finger_count() helper. Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10Input: ALPS - add semi-MT support for v4 protocolGeorge Pantalos
This patch adds semi-MT support for ALPS v4 protocol touchpads. It is based on the work by Seth Forshee for ALPS v3 and v4 protocol support. Three packets are required to assemble and process the MT data. ST events are reported at once to avoid latency. If there were two contacts or more, report MT data instead of ST events. Thanks to Seth Forshee for providing most of the code, guidance and insight for producing this patch. Signed-off-by: George Pantalos <gpantalos@gmail.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10Input: Add Synaptics NavPoint (PXA27x SSP/SPI) driverPaul Parsons
This driver adds support for the Synaptics NavPoint touchpad connected to a PXA27x SSP port in SPI slave mode. The device emulates a mouse; a tap or tap-and-a-half drag gesture emulates the left mouse button. For example, use the xf86-input-evdev driver for an X pointing device. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Tested-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10Input: atmel_mxt_ts - dump each message on just 1 lineDaniel Kurtz
Helps ensure all bytes for a single message together in the system log. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Acked-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10Input: atmel_mxt_ts - do not read extra (checksum) byteDaniel Kurtz
atmel_mxt devices will send a checksum byte at the end of a message if the MSB of the object address is set. However, since this driver does not set this bit, the checksum byte isn't actually sent, so don't even try to read it. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10Input: atmel_mxt_ts - verify object size in mxt_write_objectDaniel Kurtz
Don't allow writing past the length of an object. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10Input: atmel_mxt_ts - only allow root to update firmwareDaniel Kurtz
Restrict permissions on the update_fw sysfs entry to read only for root only. Also, update object permission to use a macro S_IRUGO macro instead of hard coded 0444. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Acked-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10Input: atmel_mxt_ts - use CONFIG_PM_SLEEPDaniel Kurtz
Simple cleanup to use newer PM APIs. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10Input: sentelic - report device's production serial numberTai-hwa Liang
Hardware since Cx supports an unique identity (used to identify OEM vendors and released lot number) which is very helpful for diagnostic purpose. This revision tries to make it as a part of driver boot up message. Whilst here, also bumping fsp_drv_ver to acknowledge recent addition of absolute coordinates output. Signed-off-by: Tai-hwa Liang <avatar@sentelic.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10Input: tl6040-vibra - Device Tree supportPeter Ujfalusi
Enable DT based probing of the vibra driver. Example of dts section to load the twl6040-vibra driver: twl6040: twl6040@4b { ... twl6040_vibra: twl6040@1 { compatible = "ti,twl6040-vibra"; interrupts = <4>; vddvibl-supply = <&vbat>; vddvibr-supply = <&vbat>; vibldrv_res = <8>; vibrdrv_res = <3>; viblmotor_res = <10>; vibrmotor_res = <10>; }; }; [Sasha Levin <levinsasha928@gmail.com>: fixed build error] Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10Merge tag 'v3.5-soc' of git://gitorious.org/linux-davinci/linux-davinci into ↵Olof Johansson
next/drivers DaVinci SoC updates for v3.5 This pull request updates the DaVinci SoC support to implement DEBUG_LL port choice and optimizes the DMA ISR by removing unnecessary register reads. * tag 'v3.5-soc' of git://gitorious.org/linux-davinci/linux-davinci: ARM: davinci: optimize the DMA ISR ARM: davinci: implement DEBUG_LL port choice + sync with Linux 3.4-rc6 Signed-off-by: Olof Johansson <olof@lixom.net>
2012-05-09Merge tag 'v3.4-rc6' into next/cleanupOlof Johansson
Linux 3.4-rc6 Resolve conflict where an u5500 file had a bugfix go in, but was deleted in the branch staged for next merge window. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-05-07Merge 3.4-rc6 into usb-nextGreg Kroah-Hartman
This resolves the conflict with: drivers/usb/host/ehci-tegra.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: appletouch: fix up compiler warningGreg Kroah-Hartman
My last patch fixing up the dev_* messages caused a compiler warning accidentally for an unused variable. Fix this up, as it was my fault. Cc: Alessandro Rubini <rubini@ipvvis.unipv.it> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: usbtouchscreen.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Henrik Rydberg <rydberg@euromail.se> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Viresh Kumar <viresh.kumar@st.com> CC: Armando Visconti <armando.visconti@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: wacom_sys.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Ping Cheng <pingc@wacom.com> CC: Chris Bagwell <chris@cnpbagwell.com> CC: Eduard Hasenleithner <eduard@hasenleithner.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: kbtab.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: gtco.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: aiptek.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Jesper Juhl <jj@chaosbits.net> CC: JJ Ding <dgdunix@gmail.com> CC: Edwin van Vliet <edwin@cheatah.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: acecad.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: bcm5974.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Henrik Rydberg <rydberg@euromail.se> CC: Alessandro Rubini <rubini@ipvvis.unipv.it> CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: appletouch.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Alessandro Rubini <rubini@ipvvis.unipv.it> CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: yealink.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Henk Vergonet <Henk.Vergonet@gmail.com> CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: powermate.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: keyspan_remote.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: cm109.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Axel Lin <axel.lin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: xpad.c: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: "Magnus Hörlin" <magnus@alefors.se> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04USB: input: iforce: fix up dev_* messagesGreg Kroah-Hartman
Previously I had made the struct device point to the input device, but after talking with Dmitry, he said that the USB device would make more sense for this driver to point to. So converted it to use that instead. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-02Merge tag 'imx-cleanup' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Arnd Bergmann
next/cleanup From: Sascha Hauer <s.hauer@pengutronix.de> ARM: i.MX cleanups for 3.5 * tag 'imx-cleanup' of git://git.pengutronix.de/git/imx/linux-2.6: (5 commits) ARM: mx53: fix pad definitions for MX53_PAD_EIM_D28__I2C1_SDA and MX53_PAD_GPIO_8__CAN1_RXCAN ARM: imx/eukrea_mbimx27-baseboard: fix typo in error message ARM: i.MX51 iomux: add missed definitions for SION-bit and mode for some pads arm: imx: add missing select IMX_HAVE_PLATFORM for MACH_MX35_3DS in Kconfig arm: imx: make various struct sys_timer static Includes an update to 3.4-rc4 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-02Input: evdev - properly handle read/write with count 0Dmitry Torokhov
According to the standard count 0 is special - no IO should happen but we can check error conditions (device gone away, etc), and return 0 if there are no errors. We used to return -EINVAL instead and we also could return 0 if an event was "stolen" by another thread. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02Input: evdev - properly access RCU-protected 'grab' dataDmitry Torokhov
We should use rcu_dereference_protected() when checking if given client is the one that grabbed the device. This fixes warnings produced by sparse. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02Input: mpu3050 - set IRQF_ONESHOT when requesting the interruptStephen Warren
Commit 1c6c695 "genirq: Reject bogus threaded irq requests" requires that request_threaded_irq() either be passed an explicit handler, or that IRQF_ONESHOT be set. Set this flag. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02Input: serio_raw - signal EFAULT even if read/write partially succeedsDmitry Torokhov
When copy_to/from_user fails in the middle of transfer we should not report to the user that read/write partially succeeded but rather report -EFAULT right away, so that application will know that it got its buffers all wrong. If application messed up its buffers we can't trust the data fetched from userspace and successfully written to the device or if data read from the device and transferred to userspace ended up where application expected it to end. If serio_write() fails we still going to report partial writes if failure happens in the middle of the transfer. This is basically a revert of 7a0a27d2ce38aee19a31fee8c12095f586eed393 and 4fa0771138d0b56fe59ab8ab3b1ce9e594484362. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02Input: wacom - use dev_xxx() instead of naked printk()s and dbg()sDmitry Torokhov
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02Input: wacom - return proper error if usb_get_extra_descriptor() failsDmitry Torokhov
Instead of returning 1 (which is not even negative) let's capture and return error codde returned by usb_get_extra_descriptor(). Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02Input: wacom - fix sparse warningDmitry Torokhov
This fixes the following warning from sparse warning: Using plain integer as NULL pointer Reviewed-by: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-01USB: usbtouchscreen.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Henrik Rydberg <rydberg@euromail.se> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Viresh Kumar <viresh.kumar@st.com> CC: Armando Visconti <armando.visconti@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: kbtab.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: gtco.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: aiptek.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Jesper Juhl <jj@chaosbits.net> CC: JJ Ding <dgdunix@gmail.com> CC: Edwin van Vliet <edwin@cheatah.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: acecad.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: bcm5974.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Henrik Rydberg <rydberg@euromail.se> CC: Alessandro Rubini <rubini@ipvvis.unipv.it> CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: appletouch.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Alessandro Rubini <rubini@ipvvis.unipv.it> CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: yealink.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Henk Vergonet <Henk.Vergonet@gmail.com> CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: powermate.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: xpad.c: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: "Magnus Hörlin" <magnus@alefors.se> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: iforce: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: wacom: remove dbg() usageGreg Kroah-Hartman
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Ping Cheng <pingc@wacom.com> Cc: Eduard Hasenleithner <eduard@hasenleithner.at> Cc: Chris Bagwell <chris@cnpbagwell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: input: usbtouchscreen.c: fix up dev_err() usageGreg Kroah-Hartman
We should always reference the input device for dev_err(), not the USB device. Fix up the places where I got this wrong. Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Henrik Rydberg <rydberg@euromail.se> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Viresh Kumar <viresh.kumar@st.com> CC: Armando Visconti <armando.visconti@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01USB: input: wacom_sys.c: fix up dev_err() usageGreg Kroah-Hartman
We should always reference the input device for dev_err(), not the USB device. Fix up the places where I got this wrong. Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> CC: Ping Cheng <pingc@wacom.com> CC: Chris Bagwell <chris@cnpbagwell.com> CC: Eduard Hasenleithner <eduard@hasenleithner.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>