summaryrefslogtreecommitdiffstats
path: root/drivers/input
AgeCommit message (Collapse)Author
2008-10-07Merge branches 'pxa-core' and 'pxa-machines' into pxa-allRussell King
Conflicts: arch/arm/mach-pxa/Kconfig arch/arm/mach-pxa/pxa25x.c arch/arm/mach-pxa/pxa27x.c
2008-10-07Merge branch 'pxa-palm' into pxa-machinesRussell King
Conflicts: drivers/mfd/Kconfig drivers/pcmcia/Makefile
2008-09-25[ARM] pxa: remove references to pxa_gpio_mode() in commentsRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-17Input: ads7846 - introduce .gpio_pendown to get pendown stateEric Miao
The GPIO connected to ADS7846 nPENIRQ signal is usually used to get the pendown state as well. Introduce a .gpio_pendown, and use this to decide the pendown state if .get_pendown_state is NULL. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-09-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - make Lenovo 3000 N100 blacklist entry more specific Input: bcm5974 - add BTN_TOUCH event for mousedev benefit Input: bcm5974 - improve finger tracking and counting Input: bcm5974 - small formatting cleanup Input: bcm5974 - add maintainer entry
2008-09-04Input: i8042 - make Lenovo 3000 N100 blacklist entry more specificJiri Kosina
Apparently, there are more different versions of Lenovo 3000 N100, some of them working properly with active mux, and some of them requiring it being switched off. This patch applies 'nomux' only to the specific product name that is reported to behave badly unless 'nomux' is specified. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-09-04Input: bcm5974 - add BTN_TOUCH event for mousedev benefitHenrik Rydberg
The mousedev driver requires the use of BTN_TOUCH events to process ABS_X and ABS_Y events properly, which is what is needed for the bcm5974-based apple computers to have a functional pointer out-of-the-box. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-09-04Input: bcm5974 - improve finger tracking and countingHenrik Rydberg
The problem of finger tracking, i.e., when to switch focus from one finger to another on the trackpad, has been improved by utilizing more information from the bcm5974 chip output. This results in less pointer hopping when many fingers are on the trackpad. In addition, a finger counting method based on pressure information from all fingers is introduced. Together with a pressure hysteresis window, this yields a more stable counting of the number of fingers on the trackpad. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-09-04Input: bcm5974 - small formatting cleanupHenrik Rydberg
Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-08-27Blackfin arch: move include/asm-blackfin header files to arch/blackfinBryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-08-23removed unused #include <linux/version.h>'sAdrian Bunk
This patch lets the files using linux/version.h match the files that #include it. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-20[ARM] 5184/1: Split ucb1400_ts into core and touchscreenMarek Vašut
This patch splits ucb1400_ts into ucb1400_ts and ucb1400_core. Since this chip supports more features than only touchscreen, it was necessary to prepare it for feature addition. The previous functionality is preserved by applying this patch. [Build fixes for non-ARM by Stephen Rothwell and Takashi Iwai] Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-20Merge branch 'sh/for-2.6.27' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Provide a FLAT_PLAT_INIT() definition. binfmt_flat: Stub in a FLAT_PLAT_INIT(). video: export sh_mobile_lcdc panel size sh: select memchunk size using kernel cmdline sh: export sh7723 VEU as VEU2H input: migor_ts compile and detection fix sh: remove MSTPCR defines from Migo-R header file sh: Update sh7763rdp defconfig sh: Add support sh7760fb to sh7763rdp board sh: Add support sh_eth to sh7763rdp board sh: Disable 64kB hugetlbpage size when using 64kB PAGE_SIZE. sh: Don't export __{s,u}divsi3_i4i from SH-2 libgcc. fix SH7705_CACHE_32KB compilation sh: mach-x3proto: Fix up smc91x platform data.
2008-08-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: evdev - fix printf() format for sizeof Input: remove version.h from drivers that don't need it Input: cobalt_btns - add missing MODULE_LICENSE
2008-08-19Input: evdev - fix printf() format for sizeofGeert Uytterhoeven
commit f2afa7711f8585ffc088ba538b9a510e0d5dca12 ("Input: paper over a bug in Synaptics X driver") introduced a compiler warning on 64-bit platforms, as sizeof() returns a size_t, not an (unsigned) int: | drivers/input/evdev.c: In function 'handle_eviocgbit': | drivers/input/evdev.c:684: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' Use the proper `z' modifier for size_t, and make the printf() formats for the sizes unsigned while we're at it. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-08-18Input: remove version.h from drivers that don't need itHuang Weiyi
If a driver dies not use LINUX_VERSION_CODE nor KERNEL_VERSION then it does not need to include version.h Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-08-18Input: cobalt_btns - add missing MODULE_LICENSEMartin Michlmayr
Export the module license and other information about the Cobalt button module in order to avoid the following warning: | WARNING: modpost: missing MODULE_LICENSE() in drivers/input/misc/cobalt_btns.o Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Acked-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-08-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xilinx_ps2 - fix warning Input: bcm5974 - implement autosuspend support Input: bcm5974 - add driver for Macbook Air and Pro Penryn touchpads Input: paper over a bug in Synaptics X driver Input: evdev - split EVIOCGBIT handlig into a separate function Input: i8042 - Add Dritek quirk for Acer TravelMate 4280 Input: xpad - add Pelican Eclipse D-Pad to the list of devices Input: gpio-keys - make gpio_keys_device_driver static Input: gpio-keys - fix possible NULL pointer dereference Input: wm97xx - enable sub-drivers by default
2008-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Handle stack trace attempts before irqstacks are setup. sparc64: Implement IRQ stacks. sparc: remove include of linux/of_device.h from asm/of_device.h sparc64: Fix recursion in stack overflow detection handling. sparc/drivers: use linux/of_device.h instead of asm/of_device.h sparc64: Don't MAGIC_SYSRQ ifdef smp_fetch_global_regs and support code.
2008-08-11sparc/drivers: use linux/of_device.h instead of asm/of_device.hStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-11input: migor_ts compile and detection fixMagnus Damm
The i2c layer got changed while the migor_ts driver was in the input tree waiting to get merged upstream. Fix current compile issue by using struct i2c_client member "name" instead of "driver_name". Also, add id_table to make sure the device gets properly detected. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-10Input: xilinx_ps2 - fix warningAndrew Morton
drivers/input/serio/xilinx_ps2.c:272: warning: cast from pointer to integer of different size Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-08-08Input: bcm5974 - implement autosuspend supportDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-08-08Input: bcm5974 - add driver for Macbook Air and Pro Penryn touchpadsHenrik Rydberg
This driver adds support for the multitouch trackpad on the new Apple Macbook Air and Macbook Pro Penryn laptops. It replaces the appletouch driver on those computers, and integrates well with the synaptics driver of the Xorg system. [dtor@mail.ru: various cleanups] Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-08-08Merge commit 'v2.6.27-rc1' into for-linusDmitry Torokhov
2008-08-08Input: paper over a bug in Synaptics X driverDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-08-08Merge branch 'for-linus-merged' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus-merged' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5177/1: arm/mach-sa1100/Makefile: remove CONFIG_SA1100_USB [ARM] 5166/1: magician: add MAINTAINERS entry [ARM] fix pnx4008 build errors [ARM] Fix SMP booting with non-zero PHYS_OFFSET [ARM] 5185/1: Fix spi num_chipselect for lubbock [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach [ARM] Add support for arch/arm/mach-*/include and arch/arm/plat-*/include [ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead [ARM] Eliminate useless includes of asm/mach-types.h [ARM] Fix circular include dependency with IRQ headers avr32: Use <mach/foo.h> instead of <asm/arch/foo.h> avr32: Introduce arch/avr32/mach-*/include/mach avr32: Move include/asm-avr32 to arch/avr32/include/asm [ARM] sa1100_wdt: use reset_status to remember watchdog reset status [ARM] pxa: introduce reset_status and clear_reset_status for driver's usage [ARM] pxa: introduce reset.h for reset specific header information
2008-08-08Input: evdev - split EVIOCGBIT handlig into a separate functionLinus Torvalds
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixesRussell King
2008-08-07[ARM] Remove asm/hardware.h, use asm/arch/hardware.h insteadRussell King
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07[ARM] Eliminate useless includes of asm/mach-types.hRussell King
There are 43 includes of asm/mach-types.h by files that don't reference anything from that file. Remove these unnecessary includes. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-06Input: i8042 - Add Dritek quirk for Acer TravelMate 4280Carlos Corbacho
Reported-by: Mattias Jernberg <nostrad@gmail.com> Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-08-06sparc: i8042-sparcio.h: fix warningAlexander Beregalov
drivers/input/serio/i8042-sparcio.h:95: warning: 'sparc_i8042_driver' defined but not used Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-04maple: Kill useless private_data pointer.Paul Mundt
We can simply wrap in to the dev_set/get_drvdata(), there's no reason to track an extra level of private data on top of the struct device. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-04maple: Clean up maple_driver_register/unregister routines.Paul Mundt
These were completely inconsistent. Clean these up to take a maple_driver pointer directly for consistency. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-04input: Clean up maple keyboard driverAdrian McMenamin
Have a single probe function instead of a probe and a connect function. Also tidy a comment. Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-08-04maple: allow removal and reinsertion of keyboard driver moduleAdrian McMenamin
Allow the removal (and subsequent reinsertion) of the maple_keyb (maple keyboard) driver by adding a working removal function. Also tidy long lines. Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-31Input: xpad - add Pelican Eclipse D-Pad to the list of devicesHarley Laue
Signed-off-by: Harley Laue <losinggeneration@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-30Input: gpio-keys - make gpio_keys_device_driver staticUwe Kleine-König
This fixes the sparse warning symbol 'gpio_keys_device_driver' was not declared. Should it be static? Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-30Input: gpio-keys - fix possible NULL pointer dereferenceUwe Kleine-König
bdata->button is used in gpio_check_button but never initialized. Having a device with debounce_interval != 0 without this patch resulted on an oops on my machine. Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-29sh: More header path fixups for mach dir refactoring.Paul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29Input: wm97xx - enable sub-drivers by defaultMark Brown
Currently the support for each WM97xx touchscreen model is compiled out by default, meaning that the default configuration when the driver is built is for it to support no hardware. This is suboptimal and leads to problems like distribution kernels shipping a non-functional driver. Change the default to support all controllers and update the help text to reflect this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: add driver for Atmel integrated touchscreen controller Input: ads7846 - optimize order of calculating Rt in ads7846_rx() Input: ads7846 - fix sparse endian warnings Input: uinput - remove duplicate include Input: serio - offload resume to kseriod Input: serio - mark serio_register_driver() __must_check
2008-07-28sh_keysc: remove request_mem_region() and release_mem_region()Tetsuya Mukawa
Remove request_mem_region() and release_mem_region() from sh_keysc driver. Those functions can find resource conflict, but it is already checked in platform_device_add(). Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp> Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-27[ARM] 5179/1: Replace obsolete IRQT_* and __IRQT_* values with IRQ_TYPE_*Dmitry Baryshkov
IRQT_* and __IRQT_* were obsoleted long ago by patch [3692/1]. Remove them completely. Sed script for the reference: s/__IRQT_RISEDGE/IRQ_TYPE_EDGE_RISING/g s/__IRQT_FALEDGE/IRQ_TYPE_EDGE_FALLING/g s/__IRQT_LOWLVL/IRQ_TYPE_LEVEL_LOW/g s/__IRQT_HIGHLVL/IRQ_TYPE_LEVEL_HIGH/g s/IRQT_RISING/IRQ_TYPE_EDGE_RISING/g s/IRQT_FALLING/IRQ_TYPE_EDGE_FALLING/g s/IRQT_BOTHEDGE/IRQ_TYPE_EDGE_BOTH/g s/IRQT_LOW/IRQ_TYPE_LEVEL_LOW/g s/IRQT_HIGH/IRQ_TYPE_LEVEL_HIGH/g s/IRQT_PROBE/IRQ_TYPE_PROBE/g s/IRQT_NOEDGE/IRQ_TYPE_NONE/g Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-25Undo duplicate "m68k: drivers/input/serio/hp_sdc.c needs <linux/semaphore.h>"Linus Torvalds
Both commits 0f17e4c796e89d1f69f13b653aba60e6ccfb8ae0 ("Add missing semaphore.h includes") and 4933d07531711e399d8d578036aa9fc1be2f9b20 ("m68k: drivers/input/serio/hp_sdc.c needs <linux/semaphore.h>") added a We only really need one ;) Reported-by: Huang Weiyi <weiyi.huang@gmail.com> Requested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24Add missing semaphore.h includesMatthew Wilcox
These files use semaphores but don't include semaphore.h Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2008-07-23Input: add driver for Atmel integrated touchscreen controllerDan Liang
The AT91SAM9RL SoC integrates a Touchscreen Controller which can trigger ADC conversion periodically. Signed-off-by: Justin Waters <justin.waters@timesys.com> Signed-off-by: Dan Liang <dan.liang@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-07-23Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (85 commits) [ARM] pxa: add base support for PXA930 Handheld Platform (aka SAAR) [ARM] pxa: add base support for PXA930 Evaluation Board (aka TavorEVB) [ARM] pxa: add base support for PXA930 (aka Tavor-P) [ARM] Update mach-types [ARM] pxa: make littleton to use the new smc91x platform data [ARM] pxa: make zylonite to use the new smc91x platform data [ARM] pxa: make mainstone to use the new smc91x platform data [ARM] pxa: make lubbock to use new smc91x platform data [NET] smc91x: prepare SMC_USE_PXA_DMA to be specified in platform data [NET] smc91x: prepare for SMC_IO_SHIFT to be a platform configurable variable [NET] smc91x: add SMC91X_NOWAIT flag to platform data [NET] smc91x: favor the use of SMC91X_USE_* instead of SMC_CAN_USE_* [NET] smc91x: remove "irq_flags" from "struct smc91x_platdata" [ARM] 5146/1: pxa2xx: convert all boards to call pxa2xx_transceiver_mode helper Support for LCD on e740 e750 e400 and e800 e-series PDAs E-series UDC support PXA UDC - allow use of inverted GPIO for pullup Add e350 support Fix broken e-series build E-series GPIO / IRQ definitions. ...
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-19 22:09:46 +0000