summaryrefslogtreecommitdiffstats
path: root/drivers/isdn
AgeCommit message (Collapse)Author
2010-07-07isdn/gigaset: remove obsolete compile time optionsTilman Schmidt
Remove compile time options in the Gigaset ISDN driver that aren't going to be changed anymore, and an obsolete FIXME comment. Impact: cleanup Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07isdn/gigaset: handle Supplementary Service ListenTilman Schmidt
Add minimal handling for the non-optional CAPI FACILITY_REQ Supplementary Service function Listen. Impact: bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07isdn/gigaset: improve CAPI message debuggingTilman Schmidt
Provide better control of debugging output for DATA_B3 CAPI messages which tend to occur very frequently. Impact: logging Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07isdn/gigaset: drop debug check on isochronous writeTilman Schmidt
With CONFIG_GIGASET_DEBUG set, every isochronous USB frame after an erroneous one was checked for more errors. This produced only noise messages in practice, so drop it. Impact: cleanup Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07isdn/gigaset: ignore irrelevant device responsesTilman Schmidt
Downgrade the Gigaset driver's reaction to unknown AT responses from the device from warning to debug level, and remove the handling of some device responses which aren't relevant for the driver's operation. Impact: cleanup Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07isdn/gigaset: avoid copying AT commands twiceTilman Schmidt
Change the Gigaset driver's internal write_cmd interface to accept a cmdbuf structure instead of a string. This avoids copying formatted AT commands a second time. Impact: optimization Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07isdn/gigaset: adjust usb_gigaset tty write buffer limitTilman Schmidt
The usb_gigaset driver's write buffer limit was different from those of the others for no good reason. Set it to the same value, derived from the Siemens documentation. Impact: cosmetic Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-07Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-07-05isdn: avoid calling tty_ldisc_flush() in atomic contextTilman Schmidt
Remove the call to tty_ldisc_flush() from the RESULT_NO_CARRIER branch of isdn_tty_modem_result(), as already proposed in commit 00409bb045887ec5e7b9e351bc080c38ab6bfd33. This avoids a "sleeping function called from invalid context" BUG when the hardware driver calls the statcallb() callback with command==ISDN_STAT_DHUP in atomic context, which in turn calls isdn_tty_modem_result(RESULT_NO_CARRIER, ~), and from there, tty_ldisc_flush() which may sleep. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-26ISDN: hysdn, fix potential NULL dereferenceJiri Slaby
Stanse found that lp is dereferenced earlier than checked for being NULL in hysdn_rx_netpkt. Move the initialization below the test. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Patrick McHardy <kaber@trash.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25isdn/gigaset: correct CAPI connection state storageTilman Schmidt
CAPI applications can handle several connections in parallel, so one connection state per application isn't sufficient. Store the connection state in the channel structure instead. Impact: bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25isdn/gigaset: encode HLC and BC togetherTilman Schmidt
Adapt to buggy device firmware which accepts setting HLC only in the same command line as BC, by encoding HLC and BC in a single command if both are specified, and rejecting HLC without BC. Impact: bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25isdn/gigaset: correct CAPI DATA_B3 Delivery ConfirmationTilman Schmidt
The Gigaset CAPI driver handled all DATA_B3_REQ messages as if the Delivery Confirmation flag bit was set, delaying the emission of the DATA_B3_CONF reply until the data was actually transmitted. Some CAPI applications (notably Asterisk) aren't happy with that behaviour. Change it to actually evaluate the Delivery Confirmation flag as described the CAPI specification. Impact: bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25isdn/gigaset: correct CAPI voice connection encodingTilman Schmidt
Make the Gigaset CAPI driver select L2_VOICE (AT^SBPR=2) as the layer 2 encoding for transparent connections, like the ISDN4Linux variant. L2_BITSYNC (AT^SBPR=0) mutes internal connections and distorts external ones. Impact: bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-25isdn/gigaset: honor CAPI application's buffer size requestTilman Schmidt
Fix the Gigaset CAPI driver to limit the length of a connection's payload data receive buffers to the corresponding CAPI application's data buffer size, as some real-life CAPI applications tend to be rather unhappy if they receive bigger data blocks than requested. Impact: bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-06Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/sfc/net_driver.h drivers/net/sfc/siena.c
2010-06-03isdn/kcapi: return -EFAULT on copy_from_user errorsDan Carpenter
copy_from_user() returns the number of bytes remaining but we should return -EFAULT here. The error code gets returned to the user. Both old_capi_manufacturer() and capi20_manufacturer() had other places that already returned -EFAULT so this won't break anything. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-01drivers/isdn/hardware/mISDN: Use GFP_ATOMIC when a lock is heldJulia Lawall
The function inittiger is only called from nj_init_card, where a lock is held. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @gfp exists@ identifier fn; position p; @@ fn(...) { ... when != spin_unlock_irqrestore when any GFP_KERNEL@p ... when any } @locked@ identifier gfp.fn; @@ spin_lock_irqsave(...) ... when != spin_unlock_irqrestore fn(...) @depends on locked@ position gfp.p; @@ - GFP_KERNEL@p + GFP_ATOMIC // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-31Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
2010-05-31drivers/isdn: Use memdup_userJulia Lawall
Use memdup_user when user data is immediately copied into the allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-31Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-05-29drivers/isdn/hardware/mISDN: Add missing spin_unlockJulia Lawall
Add a spin_unlock missing on the error path. The return value of write_reg seems to be completely ignored, so it seems that the lock should be released in every case. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E1; @@ * spin_lock(E1,...); <+... when != E1 if (...) { ... when != E1 * return ...; } ...+> * spin_unlock(E1,...); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-27mISDN: remove unnecessary test on f_posJan Blunck
This test is not doing anything since it is always false if the mISDN_read() is called from vfs_read(). Besides that the driver uses nonseekable_open() and is not using off or file->f_pos anywhere. Signed-off-by: Jan Blunck <jblunck@suse.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (63 commits) drivers/net/usb/asix.c: Fix pointer cast. be2net: Bug fix to avoid disabling bottom half during firmware upgrade. proc_dointvec: write a single value hso: add support for new products Phonet: fix potential use-after-free in pep_sock_close() ath9k: remove VEOL support for ad-hoc ath9k: change beacon allocation to prefer the first beacon slot sock.h: fix kernel-doc warning cls_cgroup: Fix build error when built-in macvlan: do proper cleanup in macvlan_common_newlink() V2 be2net: Bug fix in init code in probe net/dccp: expansion of error code size ath9k: Fix rx of mcast/bcast frames in PS mode with auto sleep wireless: fix sta_info.h kernel-doc warnings wireless: fix mac80211.h kernel-doc warnings iwlwifi: testing the wrong variable in iwl_add_bssid_station() ath9k_htc: rare leak in ath9k_hif_usb_alloc_tx_urbs() ath9k_htc: dereferencing before check in hif_usb_tx_cb() rt2x00: Fix rt2800usb TX descriptor writing. rt2x00: Fix failed SLEEP->AWAKE and AWAKE->SLEEP transitions. ...
2010-05-25drivers: isdn: use new hex_to_bin() methodAndy Shevchenko
Remove own implementation of hex_to_bin(). Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Acked-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-24Merge branch 'bkl/ioctl' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing * 'bkl/ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing: uml: Pushdown the bkl from harddog_kern ioctl sunrpc: Pushdown the bkl from sunrpc cache ioctl sunrpc: Pushdown the bkl from ioctl autofs4: Pushdown the bkl from ioctl uml: Convert to unlocked_ioctls to remove implicit BKL ncpfs: BKL ioctl pushdown coda: Clean-up whitespace problems in pioctl.c coda: BKL ioctl pushdown drivers: Push down BKL into various drivers isdn: Push down BKL into ioctl functions scsi: Push down BKL into ioctl functions dvb: Push down BKL into ioctl functions smbfs: Push down BKL into ioctl function coda/psdev: Remove BKL from ioctl function um/mmapper: Remove BKL usage sn_hwperf: Kill BKL usage hfsplus: Push down BKL into ioctl function
2010-05-23isdn/gigaset: remove dummy CAPI method implementationsTilman Schmidt
Dummy implementations for the optional CAPI controller operations load_firmware and reset_ctr can cause userspace callers to hang indefinitely. It's better not to implement them at all. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Acked-by: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-23isdn/capi: make reset_ctr op truly optionalTilman Schmidt
The CAPI controller operation reset_ctr is marked as optional, and not all drivers do implement it. Add a check to the kernel CAPI whether it exists before trying to call it. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Acked-by: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-21Merge branch 'modules' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus * 'modules' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: module: drop the lock while waiting for module to complete initialization. MODULE_DEVICE_TABLE(isapnp, ...) does nothing hisax_fcpcipnp: fix broken isapnp device table. isapnp: move definitions to mod_devicetable.h so file2alias can reach them.
2010-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits) qlcnic: adding co maintainer ixgbe: add support for active DA cables ixgbe: dcb, do not tag tc_prio_control frames ixgbe: fix ixgbe_tx_is_paused logic ixgbe: always enable vlan strip/insert when DCB is enabled ixgbe: remove some redundant code in setting FCoE FIP filter ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp ixgbe: fix header len when unsplit packet overflows to data buffer ipv6: Never schedule DAD timer on dead address ipv6: Use POSTDAD state ipv6: Use state_lock to protect ifa state ipv6: Replace inet6_ifaddr->dead with state cxgb4: notify upper drivers if the device is already up when they load cxgb4: keep interrupts available when the ports are brought down cxgb4: fix initial addition of MAC address cnic: Return SPQ credit to bnx2x after ring setup and shutdown. cnic: Convert cnic_local_flags to atomic ops. can: Fix SJA1000 command register writes on SMP systems bridge: fix build for CONFIG_SYSFS disabled ARCNET: Limit com20020 PCI ID matches for SOHARD cards ... Fix up various conflicts with pcmcia tree drivers/net/ {pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and wireless/orinoco/spectrum_cs.c} and feature removal (Documentation/feature-removal-schedule.txt). Also fix a non-content conflict due to pm_qos_requirement getting renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c
2010-05-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits) vlynq: make whole Kconfig-menu dependant on architecture add descriptive comment for TIF_MEMDIE task flag declaration. EEPROM: max6875: Header file cleanup EEPROM: 93cx6: Header file cleanup EEPROM: Header file cleanup agp: use NULL instead of 0 when pointer is needed rtc-v3020: make bitfield unsigned PCI: make bitfield unsigned jbd2: use NULL instead of 0 when pointer is needed cciss: fix shadows sparse warning doc: inode uses a mutex instead of a semaphore. uml: i386: Avoid redefinition of NR_syscalls fix "seperate" typos in comments cocbalt_lcdfb: correct sections doc: Change urls for sparse Powerpc: wii: Fix typo in comment i2o: cleanup some exit paths Documentation/: it's -> its where appropriate UML: Fix compiler warning due to missing task_struct declaration UML: add kernel.h include to signal.c ...
2010-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (29 commits) pcmcia: disable PCMCIA ioctl also for ARM drivers/staging/comedi: dev_node removal (quatech_daqp_cs) drivers/staging/comedi: dev_node removal (ni_mio_cs) drivers/staging/comedi: dev_node removal (ni_labpc_cs) drivers/staging/comedi: dev_node removal (ni_daq_dio24) drivers/staging/comedi: dev_node removal (ni_daq_700) drivers/staging/comedi: dev_node removal (das08_cs) drivers/staging/comedi: dev_node removal (cb_das16_cs) pata_pcmcia: get rid of extra indirection pcmcia: remove suspend-related comment from yenta_socket.c pcmcia: call pcmcia_{read,write}_cis_mem with ops_mutex held pcmcia: remove pcmcia_add_device_lock pcmcia: update gfp/slab.h includes pcmcia: remove unused mem_op.h pcmcia: do not autoadd root PCI bus resources pcmcia: clarify alloc_io_space, move it to resource handlers pcmcia: move all pcmcia_resource_ops providers into one module pcmcia: move high level CIS access code to separate file pcmcia: dev_node removal (core) pcmcia: dev_node removal (remaining drivers) ...
2010-05-19Merge branch 'bkl/procfs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing * 'bkl/procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing: sunrpc: Include missing smp_lock.h procfs: Kill the bkl in ioctl procfs: Push down the bkl from ioctl procfs: Use generic_file_llseek in /proc/vmcore procfs: Use generic_file_llseek in /proc/kmsg procfs: Use generic_file_llseek in /proc/kcore procfs: Kill BKL in llseek on proc base
2010-05-19hisax_fcpcipnp: fix broken isapnp device table.Rusty Russell
Found that drivers/isdn/hisax/hisax_fcpcipnp.c has broken pnp device table - wrong type (isapnp instead of pnp) and also ending record missing. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (split patch)
2010-05-17isdn: Push down BKL into ioctl functionsArnd Bergmann
Push down bkl into isdn ioctl functions [fweisbec: dropped drivers/isdn/divert/divert_procfs.c as it has been pushed down in procfs branch already] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-05-17procfs: Push down the bkl from ioctlFrederic Weisbecker
Push down the bkl from procfs's ioctl main handler to its users. Only three procfs users implement an ioctl (non unlocked) handler. Turn them into unlocked_ioctl and push down the Devil inside. v2: PDE(inode)->data doesn't need to be under bkl v3: And don't forget to git-add the result v4: Use wrappers to pushdown instead of an invasive and error prone handlers surgery. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: John Kacur <jkacur@redhat.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com>
2010-05-10pcmcia: update gfp/slab.h includesTejun Heo
Implicit slab.h inclusion via percpu.h is about to go away. Make sure gfp.h or slab.h is included as necessary. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10pcmcia: dev_node removal (remaining drivers)Dominik Brodowski
As a fourth step, remove any remaining usages of dev_node_t from drivers: - ipwireless can be simplified a bit, as we do not need to pass around the (write-only) dev_node_t around. - avma1_cs can be simplified as well, if we only keep the minor number around as "priv" data, not a full-fledged struct. Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10pcmcia: dev_node removal (drivers with updated printk call)Dominik Brodowski
As a second step, remove any usage of dev_node_t from drivers which only wrote to this typedef/struct, except one printk() which can easily be replaced by a dev_info()/dev_warn() call. CC: Harald Welte <laforge@gnumonks.org> CC: linux-ide@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-usb@vger.kernel.org Acked-by: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-10pcmcia: re-work pcmcia_request_irq()Dominik Brodowski
Instead of the old pcmcia_request_irq() interface, drivers may now choose between: - calling request_irq/free_irq directly. Use the IRQ from *p_dev->irq. - use pcmcia_request_irq(p_dev, handler_t); the PCMCIA core will clean up automatically on calls to pcmcia_disable_device() or device ejection. - drivers still not capable of IRQF_SHARED (or not telling us so) may use the deprecated pcmcia_request_exclusive_irq() for the time being; they might receive a shared IRQ nonetheless. CC: linux-bluetooth@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-serial@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-usb@vger.kernel.org CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-23Merge branch 'master' into for-nextJiri Kosina
2010-04-22X25: Use identifiers for isdn device to x25 interfaceandrew hendry
Change magic numbers to identifiers for X25 interface. also minor check patch formatting. Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Acked-by: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-19Fix ISDN/Gigaset build failureLinus Torvalds
Commit b91ecb00 ("gigaset: include cleanup cleanup") removed an implicit sched.h inclusion that came in via slab.h, and caused various compile problems as a result. This should fix it. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-18gigaset: include cleanup cleanupTilman Schmidt
Commit 5a0e3ad causes slab.h to be included twice in many of the Gigaset driver's source files, first via the common include file gigaset.h and then a second time directly. Drop the spares, and use the opportunity to clean up a few more similar cases. Impact: cleanup, no functional change Signed-off-by: Tilman Schmidt <tilman@imap.cc> CC: Tejun Heo <tj@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-29Fix comment and Kconfig typos for 'require' and 'fragment'Gilles Espinasse
Signed-off-by: Gilles Espinasse <g.esp@free.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-25isdn: Cleanup Sections in PCMCIA driver elsaHenne
Compiling this driver gave a section mismatch, so I reviewed the init/exit paths of the driver and made the correct changes. WARNING: drivers/isdn/hisax/built-in.o(.text+0x55e37): Section mismatch in reference from the function elsa_cs_config() to the function .devinit.text:hisax_init_pcmcia() The function elsa_cs_config() references the function __devinit hisax_init_pcmcia(). This is often because elsa_cs_config lacks a __devinit annotation or the annotation of hisax_init_pcmcia is wrong. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Acked-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-25isdn: Cleanup Sections in PCMCIA driver avma1Henne
Compiling this driver gave a section mismatch, so I reviewed the init/exit paths of the driver and made the correct changes. WARNING: drivers/isdn/hisax/built-in.o(.text+0x56512): Section mismatch in reference from the function avma1cs_config() to the function .devinit.text:hisax_init_pcmcia() The function avma1cs_config() references the function __devinit hisax_init_pcmcia(). This is often because avma1cs_config lacks a __devinit annotation or the annotation of hisax_init_pcmcia is wrong. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Acked-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-25isdn: Cleanup Sections in PCMCIA driver telesHenne
Compiling this driver gave a section mismatch, so I reviewed the init/exit paths of the driver and made the correct changes. WARNING: drivers/isdn/hisax/built-in.o(.text+0x56bfb): Section mismatch in reference from the function teles_cs_config() to the function .devinit.text:hisax_init_pcmcia() The function teles_cs_config() references the function __devinit hisax_init_pcmcia(). This is often because teles_cs_config lacks a __devinit annotation or the annotation of hisax_init_pcmcia is wrong. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Acked-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-25isdn: Cleanup Sections in PCMCIA driver sedlbauerHenne
Compiling this driver gave a section mismatch, so I reviewed the init/exit paths of the driver and made the correct changes. WARNING: drivers/isdn/hisax/built-in.o(.text+0x558d6): Section mismatch in reference from the function sedlbauer_config() to the function .devinit.text:hisax_init_pcmcia() The function sedlbauer_config() references the function __devinit hisax_init_pcmcia(). This is often because sedlbauer_config lacks a __devinit annotation or the annotation of hisax_init_pcmcia is wrong. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Acked-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-15 23:08:31 +0000