summaryrefslogtreecommitdiffstats
path: root/drivers/kvm/x86_emulate.h
AgeCommit message (Collapse)Author
2008-01-30KVM: Move arch dependent files to new directory arch/x86/kvm/Avi Kivity
This paves the way for multiple architecture support. Note that while ioapic.c could potentially be shared with ia64, it is also moved. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30KVM: x86 emulator: Rename 'cr2' to 'memop'Sheng Yang
Previous patches have removed the dependency on cr2; we can now stop passing it to the emulator and rename uses to 'memop'. Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30KVM: x86 emulator: Make a distinction between repeat prefixes F3 and F2Guillaume Thouvenin
cmps and scas instructions accept repeat prefixes F3 and F2. So in order to emulate those prefixed instructions we need to be able to know if prefixes are REP/REPE/REPZ or REPNE/REPNZ. Currently kvm doesn't make this distinction. This patch introduces this distinction. Signed-off-by: Guillaume Thouvenin <guillaume.thouvenin@ext.bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30KVM: x86 emulator: prefetch up to 15 bytes of the instruction executedAvi Kivity
Instead of fetching one byte at a time, prefetch 15 bytes (or until the next page boundary) to avoid guest page table walks. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30KVM: x86 emulator: retire ->write_std()Avi Kivity
Theoretically used to acccess memory known to be ordinary RAM, it was never implemented. It is questionable whether it is possible to implement it correctly. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30KVM: x86 emulator: centralize decoding of one-byte register access insnsAvi Kivity
Instructions like 'inc reg' that have the register operand encoded in the opcode are currently specially decoded. Extend decode_register_operand() to handle that case, indicated by having DstReg or SrcReg without ModRM. Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30KVM: x86 emulator: Remove no_wb, use dst.type = OP_NONE insteadLaurent Vivier
Remove no_wb, use dst.type = OP_NONE instead, idea stollen from xen-3.1 Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30KVM: emulate_instruction() calls now x86_decode_insn() and x86_emulate_insn()Laurent Vivier
emulate_instruction() calls now x86_decode_insn() and x86_emulate_insn(). x86_emulate_insn() is x86_emulate_memop() without the decoding part. Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30KVM: x86 emulator: move all x86_emulate_memop() to a structureLaurent Vivier
Move all x86_emulate_memop() common variables between decode and execute to a structure decode_cache. This will help in later separating decode and emulate. struct decode_cache { u8 twobyte; u8 b; u8 lock_prefix; u8 rep_prefix; u8 op_bytes; u8 ad_bytes; struct operand src; struct operand dst; unsigned long *override_base; unsigned int d; unsigned long regs[NR_VCPU_REGS]; unsigned long eip; /* modrm */ u8 modrm; u8 modrm_mod; u8 modrm_reg; u8 modrm_rm; u8 use_modrm_ea; unsigned long modrm_ea; unsigned long modrm_val; }; Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: Change the emulator_{read,write,cmpxchg}_* functions to take a vcpuLaurent Vivier
... instead of a x86_emulate_ctxt, so that other callers can use it easily. Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: Trivial: Make decode_register() staticRusty Russell
I have shied away from touching x86_emulate.c (it could definitely use some love, but it is forked from the Xen code, and it would be more productive to cross-merge fixes). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-10-13KVM: Trivial: Remove unused struct cpu_user_regs declarationRusty Russell
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-05-03KVM: Allow passing 64-bit values to the emulated read/write APIAvi Kivity
This simplifies the API somewhat (by eliminating the special-case cmpxchg8b on i386). Signed-off-by: Avi Kivity <avi@qumranet.com>
2006-12-13[PATCH] KVM: Replace __x86_64__ with CONFIG_X86_64Avi Kivity
As per akpm's request. Signed-off-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10[PATCH] kvm: userspace interfaceAvi Kivity
web site: http://kvm.sourceforge.net mailing list: kvm-devel@lists.sourceforge.net (http://lists.sourceforge.net/lists/listinfo/kvm-devel) The following patchset adds a driver for Intel's hardware virtualization extensions to the x86 architecture. The driver adds a character device (/dev/kvm) that exposes the virtualization capabilities to userspace. Using this driver, a process can run a virtual machine (a "guest") in a fully virtualized PC containing its own virtual hard disks, network adapters, and display. Using this driver, one can start multiple virtual machines on a host. Each virtual machine is a process on the host; a virtual cpu is a thread in that process. kill(1), nice(1), top(1) work as expected. In effect, the driver adds a third execution mode to the existing two: we now have kernel mode, user mode, and guest mode. Guest mode has its own address space mapping guest physical memory (which is accessible to user mode by mmap()ing /dev/kvm). Guest mode has no access to any I/O devices; any such access is intercepted and directed to user mode for emulation. The driver supports i386 and x86_64 hosts and guests. All combinations are allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae and non-pae paging modes are supported. SMP hosts and UP guests are supported. At the moment only Intel hardware is supported, but AMD virtualization support is being worked on. Performance currently is non-stellar due to the naive implementation of the mmu virtualization, which throws away most of the shadow page table entries every context switch. We plan to address this in two ways: - cache shadow page tables across tlb flushes - wait until AMD and Intel release processors with nested page tables Currently a virtual desktop is responsive but consumes a lot of CPU. Under Windows I tried playing pinball and watching a few flash movies; with a recent CPU one can hardly feel the virtualization. Linux/X is slower, probably due to X being in a separate process. In addition to the driver, you need a slightly modified qemu to provide I/O device emulation and the BIOS. Caveats (akpm: might no longer be true): - The Windows install currently bluescreens due to a problem with the virtual APIC. We are working on a fix. A temporary workaround is to use an existing image or install through qemu - Windows 64-bit does not work. That's also true for qemu, so it's probably a problem with the device model. [bero@arklinux.org: build fix] [simon.kagstrom@bth.se: build fix, other fixes] [uril@qumranet.com: KVM: Expose interrupt bitmap] [akpm@osdl.org: i386 build fix] [mingo@elte.hu: i386 fixes] [rdreier@cisco.com: add log levels to all printks] [randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings] [anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support] Signed-off-by: Yaniv Kamay <yaniv@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com> Cc: Simon Kagstrom <simon.kagstrom@bth.se> Cc: Bernhard Rosenkraenzer <bero@arklinux.org> Signed-off-by: Uri Lublin <uril@qumranet.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Anthony Liguori <anthony@codemonkey.ws> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>