summaryrefslogtreecommitdiffstats
path: root/drivers/leds/Makefile
AgeCommit message (Collapse)Author
2012-10-10Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED subsystem update from Bryan Wu. * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (24 commits) leds: add output driver configuration for pca9633 led driver leds: lm3642: Use regmap_update_bits() in lm3642_chip_init() leds: Add new LED driver for lm3642 chips leds-lp5523: Fix riskiness of the page fault leds-lp5523: turn off the LED engines on unloading the driver leds-lm3530: Fix smatch warnings leds-lm3530: Use devm_regulator_get function leds: leds-gpio: adopt pinctrl support leds: Add new LED driver for lm355x chips leds-lp5523: use the i2c device id rather than fixed name leds-lp5523: add new device id for LP55231 leds-lp5523: support new LP55231 device leds: triggers: send uevent when changing triggers leds-lp5523: minor code style fixes leds-lp5523: change the return type of lp5523_set_mode() leds-lp5523: set the brightness to 0 forcely on removing the driver leds-lp5523: add channel name in the platform data leds: leds-gpio: Use of_get_child_count() helper leds: leds-gpio: Use platform_{get,set}_drvdata leds: leds-gpio: use of_match_ptr() ...
2012-09-13leds: Add new LED driver for lm3642 chipsG.Shark Jeong
This driver is a general version for LM642 led chip of TI. LM3642 : The LM3642 is a 4MHz fixed-frequency synchronous boost converter plus 1.5A constant current driver for a high-current white LED. The LM3642 is controlled via an I2C-compatible interface. Signed-off-by: G.Shark Jeong <gshark.jeong@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-09-11leds: Add new LED driver for lm355x chipsG.Shark Jeong
This driver is a general version for LM355x,lm3554 and lm3556,led chips of TI. LM3554 : The LM3554 is a 2 MHz fixed-frequency synchronous boost converter with 1.2A dual high side led drivers. Datasheet: www.ti.com/lit/ds/symlink/lm3554.pdf LM3556 : The LM3556 is a 4 MHz fixed-frequency synchronous boost converter plus 1.5A constant current driver for a high-current white LED. Datasheet: www.national.com/ds/LM/LM3556.pdf (bryan.wu@canonical.com: use flush_work() to replace flush_work_sync() which is deprecated) Signed-off-by: G.Shark Jeong <gshark.jeong@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-08-13Merge branch 'for-arm-soc' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds into next/drivers From Bryan Wu <bryan.wu@canonical.com>: Based on Linus Walleij's ARM LED consolidation work, this patchset introduce a new generic led trigger for CPU not only for ARM but also for others. For enabling CPU idle event, CPU arch code should call ledtrig_cpu() stub to trigger idle start or idle end event. These patches convert old style LED driver in arch/arm to gpio_led or new led driver interface. Against 3.5 release and build successfully for all the machines. Test ledtrig-cpu driver on OMAP4 Panda board. v9 --> v10 * fix compiling issue on versatile_defconfig reported by Russell King * rebase to 3.5 kernel and move patches to new git tree v8 --> v9: * use mutex to replace rw_sema pointed out by Tim Gardner * add a new struct led_trigger_cpu * add lock_is_inited to record mutex lock initialization v6 --> v7: * add a patch to unify the led-trigger name * fix some typo pointed * use BUG_ON to detect CPU numbers during building stage v5 --> v6: * replace __get_cpu_var() to per_cpu() * remove smp_processor_id() which is wrong with for_each_possible_cpu() * test on real OMAP4 Panda board * add comments about CPU hotplug in the CPU LED trigger driver v4 --> v5: * rebase all the patches on top of latest linux-next * replace on_each_cpu() with for_each_possible_cpu() * add some description of ledtrig_cpu() API * remove old leds code from driver nwflash.c, which should use a new led trigger then * this trigger driver can be built as module now v3 --> v4: * fix a typo pointed by Jochen Friedrich * fix some building errors * add Reviewed-by and Tested-by into patch log v2 --> v3: * almost rewrote the whole ledtrig-cpu driver, which is more simple * every CPU will have a per-CPU trigger * cpu trigger can be assigned to any leds * fix a lockdep issue in led-trigger common code * other fix according to review v1 --> v2: * remove select operations in Kconfig of every machines * add back supporting of led in core module of mach-integrator * solidate name scheme in ledtrig-cpu.c * add comments of CPU_LED_* cpu led events * fold patches of RealView and Versatile together * add machine_is_ check during assabet led driver init * add some Acked-by in patch logs * remove code for simpad machine in machine-sa11000, since Jochen Friedrich introduced gpiolib and gpio-led driver for simpad * on Assabet and Netwinder machine, LED operations is reversed like: setting bit means turn off leds clearing bit means turn on leds * add a new function to read CM_CTRL register for led driver * 'for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: ARM: use new LEDS CPU trigger stub to replace old one ARM: mach-sa1100: retire custom LED code ARM: mach-omap1: retire custom LED code ARM: mach-pnx4008: remove including old leds event API header file ARM: plat-samsung: remove including old leds event API header file ARM: mach-pxa: retire custom LED code char: nwflash: remove old led event code ARM: mach-footbridge: retire custom LED code ARM: mach-ebsa110: retire custom LED code ARM: mach-clps711x: retire custom LED code of P720T machine ARM: mach-integrator: retire custom LED code ARM: mach-integrator: move CM_CTRL to header file for accessing by other functions ARM: mach-orion5x: convert custom LED code to gpio_led and LED CPU trigger ARM: mach-shark: retire custom LED code ARM: mach-ks8695: remove leds driver, since nobody use it ARM: mach-realview and mach-versatile: retire custom LED code ARM: at91: convert old leds drivers to gpio_led and led_trigger drivers led-triggers: create a trigger for CPU activity Conflicts: arch/arm/mach-clps711x/p720t.c arch/arm/mach-sa1100/leds-cerf.c arch/arm/mach-sa1100/leds-lart.c Let's hope this is the last time we pull this and it doesn't cause more trouble. I have verified that version 10 causes no build warnings or errors any more, and the patches still look good. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-07-31led-triggers: create a trigger for CPU activityBryan Wu
Attempting to consolidate the ARM LED code, this removes the custom RealView LED trigger code to turn LEDs on and off in response to CPU activity and replace it with a standard trigger. (bryan.wu@canonical.com: It introduces several syscore stubs into this trigger. It also provides ledtrig_cpu trigger event stub in <linux/leds.h>. Although it was inspired by ARM work, it can be used in other arch.) Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Tested-by: Jochen Friedrich <jochen@scram.de>
2012-07-26leds: add new lp8788 led driverKim, Milo
TI LP8788 PMU has the current sink as the keyboard led driver. The brightness is controlled by the i2c commands. Configurable parameters can be defined in the platform side. Patch v2. (a) use workqueue on changing the brightness (b) use mutex_lock/unlock when the brightness is set and the led block of lp8788 device is enabled (c) remove err_dev on _probe() : just return as returned value if any errors (d) replace module_init/exit() with module_platform_driver() (e) add led configuration structure and loading them by default if platform data is null Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-07-24LEDS: add BlinkM RGB LED driver, documentation and update MAINTAINERSJan-Simon Möller
Add driver for BlinkM device to drivers/leds/. Add entry to MAINTAINERS file. Add documentation in Documentation/leds/. A BlinkM is a RGB LED controlled through I2C. This driver implements an interface to the LED framework and another sysfs group to access the internal options of the BlinkM. rev6: Use module_i2c_driver(). rev5: Removed own workqueue in favor of events wq. rev4: Fixed comments by Bryan Wu. rev3: Fixed issues found by Jonathan Neuschäfer. (bryan.wu@canonical.com: remove 2 trailing whitespace) Signed-off-by: Jan-Simon Möller <jansimon.moeller@gmx.de> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-07-24leds: Add LED driver for lm3556 chipG.Shark Jeong
LM3556 : The LM3556 is a 4 MHz fixed-frequency synchronous boost converter plus 1.5A constant current driver for a high-current white LED. Datasheet: www.national.com/ds/LM/LM3556.pdf Tested on OMAP4430 (bryan.wu@canonical.com: use module_i2c_driver() rather than lm3556_init/lm3556_exit for code simplicity; fixed some typo pointed out by Rob Landley) Signed-off-by: G.Shark Jeong <gshark.jeong@gmail.com> Reviewed-by: Axel Lin <axel.lin@gmail.com> Reviewed-by: Kim, Milo <Milo.Kim@ti.com> Acked-by: Rob Landley <rob@landley.net> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-07-24leds: add oneshot triggerFabio Baltieri
Add oneshot trigger to blink a led with configurale parameters via sysfs. Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com> Cc: Shuah Khan <shuahkhan@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
2012-05-29leds: add LM3533 LED driverJohan Hovold
Add sub-driver for the LEDs on National Semiconductor / TI LM3533 lighting power chips. The chip provides 256 brightness levels, hardware accelerated blinking as well as ambient-light-sensor and pwm input control. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Rob Landley <rob@landley.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29leds: add new transient trigger for one shot timer activationShuah Khan
The leds timer trigger does not currently have an interface to activate a one shot timer. The current support allows for setting two timers, one for specifying how long a state to be on, and the second for how long the state to be off. The delay_on value specifies the time period an LED should stay in on state, followed by a delay_off value that specifies how long the LED should stay in off state. The on and off cycle repeats until the trigger gets deactivated. There is no provision for one time activation to implement features that require an on or off state to be held just once and then stay in the original state forever. Without one shot timer interface, user space can still use timer trigger to set a timer to hold a state, however when user space application crashes or goes away without deactivating the timer, the hardware will be left in that state permanently. As a specific example of this use-case, let's look at vibrate feature on phones. Vibrate function on phones is implemented using PWM pins on SoC or PMIC. There is a need to activate one shot timer to control the vibrate feature, to prevent user space crashes leaving the phone in vibrate mode permanently causing the battery to drain. This trigger exports three properties, activate, state, and duration When transient trigger is activated these properties are set to default values. - duration allows setting timer value in msecs. The initial value is 0. - activate allows activating and deactivating the timer specified by duration as needed. The initial and default value is 0. This will allow duration to be set after trigger activation. - state allows user to specify a transient state to be held for the specified duration. Signed-off-by: Shuah Khan <shuahkhan@gmail.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: NeilBrown <neilb@suse.de> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29leds: driver for DA9052/53 PMIC v2David Dajun Chen
LED Driver for Dialog Semiconductor DA9052/53 PMICs. [akpm@linux-foundation.org: make led_reg static] Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-27Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull "ARM: board specific updates" from Arnd Bergmann/Olof Johansson: "These changes are all specific to one board only. We're trying to keep the number of board files low, but generally board level updates are ok on platforms that are working on moving towards DT based probing, which will eventually lead to removing them. The board-ams-delta.c board file gets a conflict between the removal of ams_delta_config and the addition of a lot of other data. The Kconfig file has two changes in the same line, and in exynos, the power domain cleanup conflicts with the addition of the image sensor device. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [olof: Amended a fix for a mismerge to board-omap4panda.c] Signed-off-by: Olof Johansson <olof@lixom.net>" Fixed up some fairly trivial conflicts manually. * tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (82 commits) i.MX35-PDK: Add Camera support ARM : mx35: 3ds-board: add framebuffer device pxa/hx4700: Remove pcmcia platform_device structure ARM: pxa/hx4700: Reduce sleep mode battery discharge by 35% ARM: pxa/hx4700: Remove unwanted request for GPIO105 ARM: EXYNOS: support Exynos4210-bus Devfreq driver on Nuri board ARM: EXYNOS: Register JPEG on nuri ARM: EXYNOS: Register JPEG on universal_c210 ARM: S5PV210: Enable JPEG on SMDKV210 ARM: S5PV210: Add JPEG board definition ARM: EXYNOS: Enable JPEG on Origen ARM: EXYNOS: Enable JPEG on SMDKV310 ARM: EXYNOS: Add __init attribute to universal_camera_init() ARM: EXYNOS: Add __init attribute to nuri_camera_init() ARM: S5PV210: Enable FIMC on SMDKC110 ARM: S5PV210: Enable FIMC on SMDKV210 ARM: S5PV210: Enable MFC on SMDKC110 ARM: S5PV210: Enable MFC on SMDKV210 ARM: EXYNOS: Enable G2D on SMDKV310 ARM: tegra: update defconfig ...
2012-03-23drivers/leds: add driver for PCA9633 I2C chipPeter Meerwald
Driver for the PCA9633 I2C chip supporting four LEDs and 255 brightness levels. [akpm@linux-foundation.org: fix kcalloc() call] [axel.lin@gmail.com: fix kcalloc parameters swapped] Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-06x86/geode/net5501: Add platform driver for Soekris Engineering net5501Philip Prindeville
Add platform driver for the Soekris Engineering net5501 single-board computer. Probes well-known locations in ROM for BIOS signature to confirm correct platform. Registers 1 LED and 1 GPIO-based button (typically used for soft reset). Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Andres Salomon <dilinger@queued.net> Cc: Matthew Garrett <mjg@redhat.com> [ Removed Kconfig and Makefile detritus from drivers/leds/] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/n/tip-jv5uf34996juqh5syes8mn4h@git.kernel.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-29Merge branch 'omap1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards * 'omap1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: input: serio: ams-delta: toggle keyboard power over GPIO omapfb: lcd_ams_delta: drive control lines over GPIO MTD: NAND: ams-delta: use GPIO instead of custom I/O LED: drop leds-ams-delta driver ARM: OMAP1: ams-delta: supersede custom led device by leds-gpio ARM: OMAP1: ams-delta: convert latches to basic_mmio_gpio ARM: OMAP1: ams-delta: register latch dependent devices later
2012-01-23leds: add led driver for Bachmann's ot200Sebastian Andrzej Siewior
Add support for leds on Bachmann's ot200 visualisation device. The device has three leds on the back panel (led_err, led_init and led_run) and can handle up to seven leds on the front panel. The driver was written by Linutronix on behalf of Bachmann electronic GmbH. It incorporates feedback from Lars-Peter Clausen [akpm@linux-foundation.org: add dependency on HAS_IOMEM] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-20Merge branch 'omap1-part2' into omap1Tony Lindgren
Conflicts: drivers/leds/leds-ams-delta.c
2012-01-13Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (59 commits) rtc: max8925: Add function to work as wakeup source mfd: Add pm ops to max8925 mfd: Convert aat2870 to dev_pm_ops mfd: Still check other interrupts if we get a wm831x touchscreen IRQ mfd: Introduce missing kfree in 88pm860x probe routine mfd: Add S5M series configuration mfd: Add s5m series irq driver mfd: Add S5M core driver mfd: Improve mc13xxx dt binding document mfd: Fix stmpe section mismatch mfd: Fix stmpe build warning mfd: Fix STMPE I2c build failure mfd: Constify aat2870-core i2c_device_id table gpio: Add support for stmpe variant 801 mfd: Add support for stmpe variant 801 mfd: Add support for stmpe variant 610 mfd: Add support for STMPE SPI interface mfd: Separate out STMPE controller and interface specific code misc: Remove max8997-muic sysfs attributes mfd: Remove unused wm831x_irq_data_to_mask_reg() ... Fix up trivial conflict in drivers/leds/Kconfig due to addition of LEDS_MAX8997 and LEDS_TCA6507 next to each other.
2012-01-10leds: add driver for TCA6507 LED controllerNeilBrown
TI's TCA6507 is the LED driver in the GTA04 Openmoko motherboard. The driver provides full support for brightness levels and hardware blinking. This driver can drive each of 7 outputs as an LED or a GPIO output, and provides hardware-assist blinking. [akpm@linux-foundation.org: fix __mod_i2c_device_table alias] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NeilBrown <neilb@suse.de> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-09leds: Add suuport for MAX8997-LED driverDonggeun Kim
This patch enables LED controller in MAX8997 PMIC. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-22LED: drop leds-ams-delta driverJanusz Krzysztofik
This driver is no longer needed after the Amstrad Delta on-board LED devices have been converted to leds-gpio compatible. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-10-31leds: Renesas TPU LED driverMagnus Damm
Add V2 of the LED driver for a single timer channel for the TPU hardware block commonly found in Renesas SoCs. The driver has been written with optimal Power Management in mind, so to save power the LED is driven as a regular GPIO pin in case of maximum brightness and power off which allows the TPU hardware to be idle and which in turn allows the clocks to be stopped and the power domain to be turned off transparently. Any other brightness level requires use of the TPU hardware in PWM mode. TPU hardware device clocks and power are managed through Runtime PM. System suspend and resume is known to be working - during suspend the LED is set to off by the generic LED code. The TPU hardware timer is equipeed with a 16-bit counter together with an up-to-divide-by-64 prescaler which makes the hardware suitable for brightness control. Hardware blink is unsupported. The LED PWM waveform has been verified with a Fluke 123 Scope meter on a sh7372 Mackerel board. Tested with experimental sh7372 A3SP power domain patches. Platform device bind/unbind tested ok. V2 has been tested on the DS2 LED of the sh73a0-based AG5EVM. [axel.lin@gmail.com: include linux/module.h] Signed-off-by: Magnus Damm <damm@opensource.se> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-21x86: geode: New PCEngines Alix system driverEd Wildgoose
This new driver replaces the old PCEngines Alix 2/3 LED driver with a new driver that controls the LEDs through the leds-gpio driver. The old driver accessed GPIOs directly, which created a conflict and prevented also loading the cs5535-gpio driver to read other GPIOs on the Alix board. With this new driver, we hook into leds-gpio which in turn uses GPIO to control the LEDs and therefore it's possible to control both the LEDs and access onboard GPIOs Driver is moved to platform/geode as requested by Grant and any other geode initialisation modules should move here also This driver is inspired by leds-net5501.c by Alessandro Zummo. Ideally, leds-net5501.c should also be moved to platform/geode. Additionally the driver relies on parts of the patch: 7f131cf3ed ("leds: leds-alix2c - take port address from MSR) by Daniel Mack to perform detection of the Alix board. [akpm@linux-foundation.org: include module.h] Signed-off-by: Ed Wildgoose <kernel@wildgooses.com> Cc: git@wildgooses.com Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <daniel@caiaq.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Richard Purdie <rpurdie@rpsys.net> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-05-26leds: Add ASIC3 LED supportPaul Parsons
Add LED support for the HTC ASIC3. Underlying support is provided by the mfd/asic3 and leds/leds-asic3 drivers. An example configuration is provided by the pxa/hx4700 platform. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-25leds: provide helper to register "leds-gpio" devicesUwe Kleine-König
This function makes a deep copy of the platform data to allow it to live in init memory. For a kernel that supports several machines and so includes the definition for several leds-gpio devices this saves quite some memory because all but one definition can be free'd after boot. As the function is used by arch code it must be builtin and so cannot go into leds-gpio.c. [akpm@linux-foundation.org: s/CONFIG_LED_REGISTER_GPIO/CONFIG_LEDS_REGISTER_GPIO/] Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Acked-by: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: H Hartley Sweeten <hartleys@visionengravers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25leds: remove the leds-h1940 driverVasily Khoruzhick
The H1940 machine now uses leds-gpio and leds-h1940 has no users anymore. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Cc: "Arnaud Patard (Rtp)" <arnaud.patard@rtp-net.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22leds: add driver for LM3530 ALSShreshtha Kumar Sahu
Simple backlight driver for National Semiconductor LM3530. Presently only manual mode is supported, PWM and ALS support to be added. Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12leds: update LP552x support Kconfig and MakefileSamu Onkalo
Provide configuration and compilation support for LP5521 and LP5523 Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-07leds: add LED driver for Big Network series LEDsSimon Guinot
This patch add a LED class driver for LEDs found on the LaCie 2Big and 5Big Network v2 boards. The LEDs are wired to a CPLD and are controlled through a GPIO extension bus. Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-07-16leds: add LED driver for Network Space v2 LEDsSimon Guinot
This patch add a LED class driver for the dual-GPIO LEDs found on the Network Space v2 board (and parents). This include Internet Space v2, Network Space (Max) v2 and d2 Network v2 boards. This dual-GPIO LED is wired to a CPLD and can blink in relation with the SATA activity. The driver expose this capability through a "sata" sysfs attribute. Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-05-26leds: Add mc13783 LED supportPhilippe Rétornaz
This add basic led support for Freescale MC13783 PMIC. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-05-26leds: Add LED driver for the Soekris net5501 boardBjarke Istrup Pedersen
It is based on the previously submitted code by Alessandro Zummo, but is changed to use the new GPIO driver with 2.6.33, and the driver has been moved to drivers/leds where it belongs. [akpm@linux-foundation.org: coding-style fixes] [randy.dunlap@oracle.com: fix net5501 kconfig] Signed-off-by: Bjarke Istrup Pedersen <gurligebis@gentoo.org> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-16leds: Add Dell Business Class Netbook LED driverBob Rodgers
This patch adds an LED driver to support the Dell Activity LED on the Dell Latitude 2100 netbook and future products to come. The Activity LED is visible externally in the lid so classroom instructors can observe it from a distance. The driver uses the sysfs led_class and provides a standard LED interface. Signed-off by: Bob Rodgers <Robert_Rodgers@dell.com> Signed-off-by: Louis Davis <Louis_Davis@dell.com> Signed-off-by: Jim Dailey <Jim_Dailey@dell.com>, Developers Acked-by: Matthew Garrett <mjg@redhat.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2010-03-07led: Enable led in 88pm860xHaojian Zhuang
Enable led sub device in Marvell 88PM860x. Two LED arrays can be supported. Each LED array can be used for R,G,B leds. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-17leds: Add LED class driver for regulator driven LEDs.Antonio Ospite
This driver provides an interface for controlling LEDs (or vibrators) connected to PMICs for which there is a regulator framework driver. This driver can be used, for instance, to control vibrator on all Motorola EZX phones using the pcap-regulator driver services. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-12-16leds: Add driver for ADP5520/ADP5501 MFD PMICsMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-12-16leds: Add driver for LT3593 controlled LEDsDaniel Mack
The LT3593 is a step-up DC/DC converter designed to drive up to ten white LEDs in series. The current flow can be set with a control pin. This driver controls any number of such devices connected on generic GPIOs and exports the function as as platform_driver. The gpio_led platform data struct definition is reused for this purpose. Successfully tested on a PXA embedded board. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-12-16leds: LED driver for Intel NAS SS4200 series (v5)Dave Hansen
This code is based on a driver that came in the "Open-source and GPL components" download here: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Server+Products&ProductLine=Intel%C2%AE+Storage+Systems&ProductProduct=Intel%C2%AE+Entry+Storage+System+SS4200-E&OSVersion=OS+Independent It was in a file called nasgpio.c inside of a second zip file called SS4200-E_Linux_SIO_Driver-v1.4.zip and is based on this updated to use the LED subsystem with the ioctl and hardware monitor support removed. I don't have any need for brightness control, and its code is *completely* separate from the on/off controls implemented here. If anyone else wants it, I'd be happy to look into adding it, but I don't care enough for now. Except for the probe routines, I rewrote most of it. I also Note that I don't have any hardware documentation except for the original driver. Thanks go to Arjan for his help in getting the original source for this released and for chasing down some licensing issues. Signed-off-by: Dave Hansen <dave@sr71.net> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-09-07leds: Add WM831x status LED driverMark Brown
The WM831x devices feature two software controlled status LEDs with hardware assisted blinking. The device can also autonomously control the LEDs based on a selection of sources. This can be configured at boot time using either platform data or the chip OTP. A sysfs file in the style of that for triggers allowing the control source to be configured at run time. Triggers can't be used here since they can't depend on the implementation details of a specific LED type. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-06-23leds: LED driver for National Semiconductor LP3944 Funlight ChipAntonio Ospite
LEDs driver for National Semiconductor LP3944 Funlight Chip http://www.national.com/pf/LP/LP3944.html This helper chip can drive up to 8 leds, with two programmable DIM modes; it could even be used as a gpio expander but this driver assumes it is used as a led controller. The DIM modes are used to set _blink_ patterns for leds, the pattern is specified supplying two parameters: - period: from 0s to 1.6s - duty cycle: percentage of the period the led is on, from 0 to 100 LP3944 can be found on Motorola A910 smartphone, where it drives the rgb leds, the camera flash light and the displays backlights. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-04-06leds: add BD2802GU LED driverKim Kyuwon
ROHM BD2802GU is a RGB LED controller attached to i2c bus and specifically engineered for decoration purposes. This RGB controller incorporates lighting patterns and illuminates. This driver is designed to minimize power consumption, so when there is no emitting LED, it enters to reset state. And because the BD2802GU has lots of features that can't be covered by the current LED framework, it provides Advanced Configuration Function(ADF) mode, so that user applications can set registers of BD2802GU directly. Here are basic usage examples : ; to turn on LED (not blink) $ echo 1 > /sys/class/leds/led1_R/brightness ; to blink LED $ echo timer > /sys/class/leds/led1_R/trigger $ echo 1 > /sys/class/leds/led1_R/delay_on $ echo 1 > /sys/class/leds/led1_R/delay_off ; to turn off LED $ echo 0 > /sys/class/leds/led1_R/brightness [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Kim Kyuwon <chammoru@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-04-06leds: Add gpio-led triggerFelipe Balbi
The gpio led trigger will allow leds to be triggered by gpio events. When we give the led a gpio number, the trigger will request_irq() on that so we don't have to keep polling for gpio state. It's useful for usecases as n810's keypad leds that could be triggered by the gpio event generated when user slides up to show the keypad. We also provide means for userland to tell us what is the desired brightness for that special led when it goes on so userland could use information from ambient light sensors and not set led brightness too high if it's not necessary. Signed-off-by: Felipe Balbi <me@felipebalbi.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-04-06leds: Add rb532 LED driver for the User LEDPhil Sutter
Mikrotik built six LEDs into the Routerboard 532, from which one is destined for custom use, the so called "User LED". This patch adds a driver for it, based on the LEDs class. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-04-06leds: simple driver for pwm driven LEDsLuotao Fu
Add a simple driver for pwm driver LEDs. pwm_id and period can be defined in board file. It is developed for pxa, however it is probably generic enough to be used on other platforms with pwm. Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-04-06leds: Add dac124s085 driverGuennadi Liakhovetski
Add an LED driver using the DAC124S085 DAC from NatSemi [randy.dunlap@oracle.com: use header files for interfaces] Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-01-15lis3lv02d: merge with leds hp diskEric Piel
Move the second part of the HP laptop disk protection functionality (a red led) to the same driver. From a purely Linux developer's point of view, the led and the accelerometer have nothing related. However, they correspond to the same ACPI functionality, and so will always be used together, moreover as they share the same ACPI PNP alias, there is no other simple to allow to have same loaded at the same time if they are not in the same module. Also make it requires the led class to compile and update the Kconfig text. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08leds: Add WM8350 LED driverMark Brown
The voltage and current regulators on the WM8350 AudioPlus PMIC can be used in concert to provide a power efficient LED driver. This driver implements support for this within the standard LED class. Platform initialisation code should configure the LED hardware in the init callback provided by the WM8350 core driver. The callback should use wm8350_isink_set_flash(), wm8350_dcdc25_set_mode() and wm8350_dcdc_set_slot() to configure the operating parameters of the regulators for their hardware and then then use wm8350_register_led() to instantiate the LED driver. This driver was originally written by Liam Girdwood, though it has been extensively modified since then. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-01-08leds: ALIX.2 LEDs driverConstantin Baranov
Driver for PC Engines ALIX.2 and ALIX.3 LEDs. Signed-off-by: Constantin Baranov <const@mimas.ru> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2008-10-20leds: Add driver for HP harddisk protection LEDsPavel Machek
HP notebooks contain accelerometer-based disk protection subsystem, and LED that indicates hard disk is protected. This is driver for the LED part. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>