summaryrefslogtreecommitdiffstats
path: root/drivers/md/raid0.c
AgeCommit message (Collapse)Author
2013-11-23block: Introduce new bio_split()Kent Overstreet
The new bio_split() can split arbitrary bios - it's not restricted to single page bios, like the old bio_split() (previously renamed to bio_pair_split()). It also has different semantics - it doesn't allocate a struct bio_pair, leaving it up to the caller to handle completions. Then convert the existing bio_pair_split() users to the new bio_split() - and also nvme, which was open coding bio splitting. (We have to take that BUG_ON() out of bio_integrity_trim() because this bio_split() needs to use it, and there's no reason it has to be used on bios marked as cloned; BIO_CLONED doesn't seem to have clearly documented semantics anyways.) Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Neil Brown <neilb@suse.de>
2013-11-23block: Rename bio_split() -> bio_pair_split()Kent Overstreet
This is prep work for introducing a more general bio_split(). Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: NeilBrown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Peter Osterlund <petero2@telia.com> Cc: Sage Weil <sage@inktank.com>
2013-11-23block: Kill bio_segments()/bi_vcnt usageKent Overstreet
When we start sharing biovecs, keeping bi_vcnt accurate for splits is going to be error prone - and unnecessary, if we refactor some code. So bio_segments() has to go - but most of the existing users just needed to know if the bio had multiple segments, which is easier - add a bio_multiple_segments() for them. (Two of the current uses of bio_segments() are going to go away in a couple patches, but the current implementation of bio_segments() is unsafe as soon as we start doing driver conversions for immutable biovecs - so implement a dumb version for bisectability, it'll go away in a couple patches) Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Neil Brown <neilb@suse.de> Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
2013-11-23block: Abstract out bvec iteratorKent Overstreet
Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-06-26md: fix buglet in RAID5 -> RAID0 conversion.NeilBrown
RAID5 uses a 'per-array' value for the 'size' of each device. RAID0 uses a 'per-device' value - it can be different for each device. When converting a RAID5 to a RAID0 we must ensure that the per-device size of each device matches the per-array size for the RAID5, else the array will change size. If the metadata cannot record a changed per-device size (as is the case with v0.90 metadata) the array could get bigger on restart. This does not cause data corruption, so it not a big issue and is mainly yet another a reason to not use 0.90. Signed-off-by: NeilBrown <neilb@suse.de>
2013-03-23block: Change bio_split() to respect the current value of bi_idxKent Overstreet
In the current code bio_split() won't be seeing partially completed bios so this doesn't change any behaviour, but this makes the code a bit clearer as to what bio_split() actually requires. The immediate purpose of the patch is removing unnecessary bi_idx references, but the end goal is to allow partial completed bios to be submitted, which along with immutable biovecs enables effecient bio splitting. Some of the callers were (double) checking that bios could be split, so update their checks too. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> CC: Lars Ellenberg <drbd-dev@lists.linbit.com> CC: Neil Brown <neilb@suse.de> CC: Martin K. Petersen <martin.petersen@oracle.com>
2013-03-23block: Use bio_sectors() more consistentlyKent Overstreet
Bunch of places in the code weren't using it where they could be - this'll reduce the size of the patch that puts bi_sector/bi_size/bi_idx into a struct bvec_iter. Signed-off-by: Kent Overstreet <koverstreet@google.com> CC: Jens Axboe <axboe@kernel.dk> CC: "Ed L. Cashin" <ecashin@coraid.com> CC: Nick Piggin <npiggin@kernel.dk> CC: Jiri Kosina <jkosina@suse.cz> CC: Jim Paris <jim@jtan.com> CC: Geoff Levand <geoff@infradead.org> CC: Alasdair Kergon <agk@redhat.com> CC: dm-devel@redhat.com CC: Neil Brown <neilb@suse.de> CC: Steven Rostedt <rostedt@goodmis.org> Acked-by: Ed Cashin <ecashin@coraid.com>
2013-02-26md/raid0: improve error message when converting RAID4-with-spares to RAID0NeilBrown
Mentioning "bad disk number -1" exposes irrelevant internal detail. Just say they are inactive and must be removed. Signed-off-by: NeilBrown <neilb@suse.de>
2013-02-26md: raid0: fix error return from create_stripe_zones.NeilBrown
Create_stripe_zones returns an error slightly differently to raid0_run and to raid0_takeover_*. The error returned used by the second was wrong and an error would result in mddev->private being set to NULL and sooner or later a crash. So never return NULL, return ERR_PTR(err), not NULL from create_stripe_zones. This bug has been present since 2.6.35 so the fix is suitable for any kernel since then. Cc: stable@vger.kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2013-02-26md: fix two bugs when attempting to resize RAID0 array.NeilBrown
You cannot resize a RAID0 array (in terms of making the devices bigger), but the code doesn't entirely stop you. So: disable setting of the available size on each device for RAID0 and Linear devices. This must not change as doing so can change the effective layout of data. Make sure that the size that raid0_size() reports is accurate, but rounding devices sizes to chunk sizes. As the device sizes cannot change now, this isn't so important, but it is best to be safe. Without this change: mdadm --grow /dev/md0 -z max mdadm --grow /dev/md0 -Z max then read to the end of the array can cause a BUG in a RAID0 array. These bugs have been present ever since it became possible to resize any device, which is a long time. So the fix is suitable for any -stable kerenl. Cc: stable@vger.kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2012-10-11md: raid 0 supports TRIMShaohua Li
This makes md raid 0 support TRIM. Signed-off-by: Shaohua Li <shli@fusionio.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-09-20block: Implement support for WRITE SAMEMartin K. Petersen
The WRITE SAME command supported on some SCSI devices allows the same block to be efficiently replicated throughout a block range. Only a single logical block is transferred from the host and the storage device writes the same data to all blocks described by the I/O. This patch implements support for WRITE SAME in the block layer. The blkdev_issue_write_same() function can be used by filesystems and block drivers to replicate a buffer across a block range. This can be used to efficiently initialize software RAID devices, etc. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-04-03md: Avoid OOPS when reshaping raid1 to raid0Jes Sorensen
raid1 arrays do not have the notion of chunk size. Calculate the largest chunk sector size we can use to avoid a divide by zero OOPS when aligning the size of the new array to the chunk size. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-04-02md/raid0: If md_integrity_register() fails, raid0_run() must free the mem.majianpeng
Signed-off-by: majianpeng <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19md: add proper merge_bvec handling to RAID0 and Linear.NeilBrown
These personalities currently set a max request size of one page when any member device has a merge_bvec_fn because they don't bother to call that function. This causes extra works in splitting and combining requests. So make the extra effort to call the merge_bvec_fn when it exists so that we end up with larger requests out the bottom. Signed-off-by: NeilBrown <neilb@suse.de>
2012-03-19md: tidy up rdev_for_each usage.NeilBrown
md.h has an 'rdev_for_each()' macro for iterating the rdevs in an mddev. However it uses the 'safe' version of list_for_each_entry, and so requires the extra variable, but doesn't include 'safe' in the name, which is useful documentation. Consequently some places use this safe version without needing it, and many use an explicity list_for_each entry. So: - rename rdev_for_each to rdev_for_each_safe - create a new rdev_for_each which uses the plain list_for_each_entry, - use the 'safe' version only where needed, and convert all other list_for_each_entry calls to use rdev_for_each. Signed-off-by: NeilBrown <neilb@suse.de>
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-04Merge branch 'for-3.2/core' of git://git.kernel.dk/linux-blockLinus Torvalds
* 'for-3.2/core' of git://git.kernel.dk/linux-block: (29 commits) block: don't call blk_drain_queue() if elevator is not up blk-throttle: use queue_is_locked() instead of lockdep_is_held() blk-throttle: Take blkcg->lock while traversing blkcg->policy_list blk-throttle: Free up policy node associated with deleted rule block: warn if tag is greater than real_max_depth. block: make gendisk hold a reference to its queue blk-flush: move the queue kick into blk-flush: fix invalid BUG_ON in blk_insert_flush block: Remove the control of complete cpu from bio. block: fix a typo in the blk-cgroup.h file block: initialize the bounce pool if high memory may be added later block: fix request_queue lifetime handling by making blk_queue_cleanup() properly shutdown block: drop @tsk from attempt_plug_merge() and explain sync rules block: make get_request[_wait]() fail if queue is dead block: reorganize throtl_get_tg() and blk_throtl_bio() block: reorganize queue draining block: drop unnecessary blk_get/put_queue() in scsi_cmd_ioctl() and blk_get_tg() block: pass around REQ_* flags instead of broken down booleans during request alloc/free block: move blk_throtl prototypes to block/blk.h block: fix genhd refcounting in blkio_policy_parse_and_set() ... Fix up trivial conflicts due to "mddev_t" -> "struct mddev" conversion and making the request functions be of type "void" instead of "int" in - drivers/md/{faulty.c,linear.c,md.c,md.h,multipath.c,raid0.c,raid1.c,raid10.c,raid5.c} - drivers/staging/zram/zram_drv.c
2011-10-31md: Add module.h to all files using it implicitlyPaul Gortmaker
A pending cleanup will mean that module.h won't be implicitly everywhere anymore. Make sure the modular drivers in md dir are actually calling out for <module.h> explicitly in advance. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-11md: rename "mdk_personality" to "md_personality"NeilBrown
"mdk" doesn't mean anything any more. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11md/raid0: typedef removal: raid0_conf_t -> struct r0confNeilBrown
Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11md: remove typedefs: mddev_t -> struct mddevNeilBrown
Having mddev_t and 'struct mddev_s' is ugly and not preferred Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-11md: removing typedefs: mdk_rdev_t -> struct md_rdevNeilBrown
The typedefs are just annoying. 'mdk' probably refers to 'md_k.h' which used to be an include file that defined this thing. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07md/raid0: convert some printks to pr_debug.NeilBrown
When md assembles a RAID0 array it prints out lots of info which is really just for debugging, so convert that to pr_debug. It also prints out the resulting configuration which could be interesting, so keep that as 'printk' but tidy it up a bit. Signed-off-by: NeilBrown <neilb@suse.de>
2011-10-07md: remove some old DEBUGging code.NeilBrown
This code is not really helpful and is hard to maintain, so just discard it. Signed-off-by: NeilBrown <neilb@suse.de>
2011-09-12block: remove support for bio remapping from ->make_requestChristoph Hellwig
There is very little benefit in allowing to let a ->make_request instance update the bios device and sector and loop around it in __generic_make_request when we can archive the same through calling generic_make_request from the driver and letting the loop in generic_make_request handle it. Note that various drivers got the return value from ->make_request and returned non-zero values for errors. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-17block: Require subsystems to explicitly allocate bio_set integrity mempoolMartin K. Petersen
MD and DM create a new bio_set for every metadevice. Each bio_set has an integrity mempool attached regardless of whether the metadevice is capable of passing integrity metadata. This is a waste of memory. Instead we defer the allocation decision to MD and DM since we know at metadevice creation time whether integrity passthrough is needed or not. Automatic integrity mempool allocation can then be removed from bioset_create() and we make an explicit integrity allocation for the fs_bio_set. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reported-by: Zdenek Kabelac <zkabelac@redhat.com> Acked-by: Mike Snitzer <snizer@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10Merge branch 'for-2.6.39/stack-plug' into for-2.6.39/coreJens Axboe
Conflicts: block/blk-core.c block/blk-flush.c drivers/md/raid1.c drivers/md/raid10.c drivers/md/raid5.c fs/nilfs2/btnode.c fs/nilfs2/mdt.c Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10block: remove per-queue pluggingJens Axboe
Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-02-21md: avoid spinlock problem in blk_throtl_exitNeilBrown
blk_throtl_exit assumes that ->queue_lock still exists, so make sure that it does. To do this, we stop redirecting ->queue_lock to conf->device_lock and leave it pointing where it is initialised - __queue_lock. As the blk_plug functions check the ->queue_lock is held, we now take that spin_lock explicitly around the plug functions. We don't need the locking, just the warning removal. This is needed for any kernel with the blk_throtl code, which is which is 2.6.37 and later. Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2011-02-14md: Fix raid1->raid0 takeoverKrzysztof Wojcik
Takeover raid1->raid0 not succeded. Kernel message is shown: "md/raid0:md126: too few disks (1 of 2) - aborting!" Problem was that we weren't updating ->raid_disks for that takeover, unlike all the others. Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2011-01-31Add raid1->raid0 takeover supportKrzysztof Wojcik
This patch introduces raid 1 to raid0 takeover operation in kernel space. Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com> Signed-off-by: Neil Brown <neilb@nbeee.brown>
2010-09-10md: implment REQ_FLUSH/FUA supportTejun Heo
This patch converts md to support REQ_FLUSH/FUA instead of now deprecated REQ_HARDBARRIER. In the core part (md.c), the following changes are notable. * Unlike REQ_HARDBARRIER, REQ_FLUSH/FUA don't interfere with processing of other requests and thus there is no reason to mark the queue congested while FLUSH/FUA is in progress. * REQ_FLUSH/FUA failures are final and its users don't need retry logic. Retry logic is removed. * Preflush needs to be issued to all member devices but FUA writes can be handled the same way as other writes - their processing can be deferred to request_queue of member devices. md_barrier_request() is renamed to md_flush_request() and simplified accordingly. For linear, raid0 and multipath, the core changes are enough. raid1, 5 and 10 need the following conversions. * raid1: Handling of FLUSH/FUA bio's can simply be deferred to request_queues of member devices. Barrier related logic removed. * raid5: Queue draining logic dropped. FUA bit is propagated through biodrain and stripe resconstruction such that all the updated parts of the stripe are written out with FUA writes if any of the dirtying writes was FUA. preread_active_stripes handling in make_request() is updated as suggested by Neil Brown. * raid10: FUA bit needs to be propagated to write clones. linear, raid0, 1, 5 and 10 tested. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Neil Brown <neilb@suse.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07block: unify flags for struct bio and struct requestChristoph Hellwig
Remove the current bio flags and reuse the request flags for the bio, too. This allows to more easily trace the type of I/O from the filesystem down to the block driver. There were two flags in the bio that were missing in the requests: BIO_RW_UNPLUG and BIO_RW_AHEAD. Also I've renamed two request flags that had a superflous RW in them. Note that the flags are in bio.h despite having the REQ_ name - as blkdev.h includes bio.h that is the only way to go for now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-24md: enable raid4->raid0 takeoverMaciej Trela
Only level 5 with layout=PARITY_N can be taken over to raid0 now. Lets allow level 4 either. Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-24md: clear layout after ->raid0 takeoverMaciej Trela
After takeover from raid5/10 -> raid0 mddev->layout is not cleared. Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-06-24md: fix handling of array level takeover that re-arranges devices.NeilBrown
Most array level changes leave the list of devices largely unchanged, possibly causing one at the end to become redundant. However conversions between RAID0 and RAID10 need to renumber all devices (except 0). This renumbering is currently being done in the ->run method when the new personality takes over. However this is too late as the common code in md.c might already have invalidated some of the devices if they had a ->raid_disk number that appeared to high. Moving it into the ->takeover method is too early as the array is still active at that time and wrong ->raid_disk numbers could cause confusion. So add a ->new_raid_disk field to mdk_rdev_s and use it to communicate the new raid_disk number. Now the common code knows exactly which devices need to be renumbered, and which can be invalidated, and can do it all at a convenient time when the array is suspend. It can also update some symlinks in sysfs which previously were not be updated correctly. Reported-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-05-22Merge commit '3ff195b011d7decf501a4d55aeed312731094796' into for-linusNeilBrown
Conflicts: drivers/md/md.c - Resolved conflict in md_update_sb - Added extra 'NULL' arg to new instance of sysfs_get_dirent. Signed-off-by: NeilBrown <neilb@suse.de>
2010-05-18md/raid0: tidy up printk messages.NeilBrown
All messages now start md/raid0:md-device-name: Signed-off-by: NeilBrown <neilb@suse.de>
2010-05-18md: pass mddev to make_request functions rather than request_queueNeilBrown
We used to pass the personality make_request function direct to the block layer so the first argument had to be a queue. But now we have the intermediary md_make_request so it makes at lot more sense to pass a struct mddev_s. It makes it possible to have an mddev without its own queue too. Signed-off-by: NeilBrown <neilb@suse.de>
2010-05-18md: move io accounting out of personalities into md_make_requestNeilBrown
While I generally prefer letting personalities do as much as possible, given that we have a central md_make_request anyway we may as well use it to simplify code. Also this centralises knowledge of ->gendisk which will help later. Signed-off-by: NeilBrown <neilb@suse.de>
2010-05-18md: Add support for Raid5->Raid0 and Raid10->Raid0 takeoverTrela, Maciej
Signed-off-by: Maciej Trela <maciej.trela@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-05-18md: don't use mddev->raid_disks in raid0 or raid10 while array is active.NeilBrown
In a subsequent patch we will make it possible to change mddev->raid_disks while a RAID0 or RAID10 array is active. This is part of the process of reshaping such an array. This means that we cannot use this value while processes requests (it is OK to use it during initialisation as we are locked against changes then). Both RAID0 and RAID10 have the same value stored in the private data structure, so use that value instead. Signed-off-by: NeilBrown <neilb@suse.de>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-16md: deal with merge_bvec_fn in component devices better.NeilBrown
If a component device has a merge_bvec_fn then as we never call it we must ensure we never need to. Currently this is done by setting max_sector to 1 PAGE, however this does not stop a bio being created with several sub-page iovecs that would violate the merge_bvec_fn. So instead set max_segments to 1 and set the segment boundary to the same as a page boundary to ensure there is only ever one single-page segment of IO requested at a time. This can particularly be an issue when 'xen' is used as it is known to submit multiple small buffers in a single bio. Signed-off-by: NeilBrown <neilb@suse.de> Cc: stable@kernel.org
2010-02-26block: Rename blk_queue_max_sectors to blk_queue_max_hw_sectorsMartin K. Petersen
The block layer calling convention is blk_queue_<limit name>. blk_queue_max_sectors predates this practice, leading to some confusion. Rename the function to appropriately reflect that its intended use is to set max_hw_sectors. Also introduce a temporary wrapper for backwards compability. This can be removed after the merge window is closed. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-12-14md: add MODULE_DESCRIPTION for all md related modules.NeilBrown
Suggested by Oren Held <orenhe@il.ibm.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-12-14md: support barrier requests on all personalities.NeilBrown
Previously barriers were only supported on RAID1. This is because other levels requires synchronisation across all devices and so needed a different approach. Here is that approach. When a barrier arrives, we send a zero-length barrier to every active device. When that completes - and if the original request was not empty - we submit the barrier request itself (with the barrier flag cleared) and then submit a fresh load of zero length barriers. The barrier request itself is asynchronous, but any subsequent request will block until the barrier completes. The reason for clearing the barrier flag is that a barrier request is allowed to fail. If we pass a non-empty barrier through a striping raid level it is conceivable that part of it could succeed and part could fail. That would be way too hard to deal with. So if the first run of zero length barriers succeed, we assume all is sufficiently well that we send the request and ignore errors in the second run of barriers. RAID5 needs extra care as write requests may not have been submitted to the underlying devices yet. So we flush the stripe cache before proceeding with the barrier. Note that the second set of zero-length barriers are submitted immediately after the original request is submitted. Thus when a personality finds mddev->barrier to be set during make_request, it should not return from make_request until the corresponding per-device request(s) have been queued. That will be done in later patches. Signed-off-by: NeilBrown <neilb@suse.de> Reviewed-by: Andre Noll <maan@systemlinux.org>
2009-09-23md: report device as congested when suspendedNeilBrown
This should writeback from coming when the device is temporarily suspended. Signed-off-by: NeilBrown <neilb@suse.de>
2009-09-23md: remove sparse waring "symbol xxx shadows an earlier one"NeilBrown
Rename some variable and remove some duplicate definitions to avoid there warnings. None of them are actual errors. Signed-off-by: NeilBrown <neilb@suse.de>