summaryrefslogtreecommitdiffstats
path: root/drivers/media/dvb/dvb-usb/anysee.c
AgeCommit message (Collapse)Author
2011-07-31[media] anysee: use multi-frontend (MFE)Antti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-31[media] dvb-usb: prepare for multi-frontend support (MFE)Antti Palosaari
Change adapter FE pointer as array of FE pointers. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] anysee: style issues, comments, etcAntti Palosaari
Change some info, comments, variables. No functionality changes. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] anysee: add support for Anysee E7 PS2Antti Palosaari
Basically it is just same device as Anysee E7 S2 but made for internal PCI(e) slot and motherboard USB connector. Cc: info@anysee.com Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] anysee: add support for Anysee E7 PTCAntti Palosaari
Basically it is just same device as Anysee E7 TC but made for internal PCI(e) slot and motherboard USB connector. Cc: info@anysee.com Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-06-01[media] anysee: return EOPNOTSUPP for unsupported I2C messagesAntti Palosaari
Check I2C messages and return error properly. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: add support for Anysee E7 S2Antti Palosaari
It is DVB-S/S2 USB box. * DNBU10512IST NIM * STV0903 demod * STV6110 tuner * Intersil ISL6423 LNB controller Signed-off-by: Antti Palosaari <crope@iki.fi> Cc: info@anysee.com Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: add support for Anysee E30 S2 PlusAntti Palosaari
It is USB DVB-S/S2 box. Conexant cx24116/cx24118 demod tuner combo Intersil ISL6423 LNB controller Signed-off-by: Antti Palosaari <crope@iki.fi> Cc: info@anysee.com Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: add more info about known board configsAntti Palosaari
Add some comments about known GPIO settings of supported board versions. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: add support for two byte I2C addressAntti Palosaari
After that Anysee I2C adapter is capable of one and two byte long I2C addresses in case of read from I2C bus. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: enhance demod and tuner attachAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: fix E30 Combo Plus TDA18212 DVB-TAntti Palosaari
Use correct I2C address for ZL10353 DVB-T demod. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: fix E30 Combo Plus TDA18212 GPIOAntti Palosaari
Looks like it is IF route switch on IOE[0]. Set it correctly to route signal from tuner to demod. Now it works for DVB-C too. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: add support for Anysee E7 TCAntti Palosaari
It is ZL10353, TDA10023 and TDA18212. Tuner is inside of Samsung DNOD44CDH086A tuner module. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: add support for TDA18212 based E30 Combo PlusAntti Palosaari
New models have new NXP TDA18212 silicon tuner. Not tested yet due to lack of HW... Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: reimplement demod and tuner attachAntti Palosaari
Use board ID as base value when selecting correct hardware configuration. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: change some messagesAntti Palosaari
Print firmware version as two digit long (change from 3 to 2). Windows app have changed that too. First byte was hard coded as 0. Change email list address to report non-working device to current one. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: fix multibyte I2C readAntti Palosaari
It can read more than one byte from I2C bus. Allow that. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] anysee: I2C address fixAntti Palosaari
Switch from 8 bit notation to real 7 bit. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc: Rename remote controller type to rc_type instead of ir_typeMauro Carvalho Chehab
for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,IR_TYPE,RC_TYPE,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_type,rc_type,g <$i >a && mv a $i; done Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] Rename all public generic RC functions from ir_ to rc_Mauro Carvalho Chehab
Those functions are not InfraRed specific. So, rename them to properly reflect it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] ir-core: make struct rc_dev the primary interfaceDavid Härdeman
This patch merges the ir_input_dev and ir_dev_props structs into a single struct called rc_dev. The drivers and various functions in rc-core used by the drivers are also changed to use rc_dev as the primary interface when dealing with rc-core. This means that the input_dev is abstracted away from the drivers which is necessary if we ever want to support multiple input devs per rc device. The new API is similar to what the input subsystem uses, i.e: rc_device_alloc() rc_device_free() rc_device_register() rc_device_unregister() [mchehab@redhat.com: Fix compilation on mceusb and cx231xx, due to merge conflicts] Signed-off-by: David Härdeman <david@hardeman.nu> Acked-by: Jarod Wilson <jarod@redhat.com> Tested-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-22[media] anysee: switch to RC coreAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: dvb-usb: prepare drivers for using rc-coreMauro Carvalho Chehab
This is a big patch, yet trivial. It just move the RC properties to a separate struct, in order to prepare the dvb-usb drivers to use rc-core. There's no change on the behavior of the drivers. With this change, it is possible to have both legacy and rc-core based code inside the dvb-usb-remote, allowing a gradual migration to rc-core, driver per driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: dvb-usb: get rid of struct dvb_usb_rc_keyMauro Carvalho Chehab
dvb-usb has its own IR handle code. Now that we have a Remote Controller subsystem, we should start using it. So, remove this struct, in favor of the similar struct defined at the RC subsystem. This is a big, but trivial patch. It is a 3 line delect, plus lots of rename on several dvb-usb files. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: remove unneeded null check in anysee_probe()Dan Carpenter
Smatch complained because "d" is dereferenced first and then checked for null later . The only code path where "d" could be a invalid pointer is if this is a cold device in dvb_usb_device_init(). I consulted Antti Palosaari and he explained that anysee is always a warm device. I have added a comment and removed the unneeded null check. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: rename all *_rc_keys to ir_codes_*_nec_tableMauro Carvalho Chehab
Several DVB drivers use a different name convention. As we're moving the keytables, we need to use the same convention on all places. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-04tree-wide: fix assorted typos all over the placeAndré Goddard Rosa
That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-19V4L/DVB (12960): anysee: coding style fixAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19V4L/DVB (12959): anysee: increase BULK transfer size from 512 to 8192Antti Palosaari
increase BULK transfer size from 512 to 8192 to increase wakeups Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12598): dvb-usb: store rc5 custom and data at the same fieldMauro Carvalho Chehab
In order to be closer to V4L IR implementation, it is needed to replace u8 custom, data to: u16 scan This allows using non-rc5 mappings, like the 8 bit keycodes used on older protocols. It will also allow future implementations of rc6 keystrokes when needed. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-07V4L/DVB (10180): drivers/media: Fix a number of sparse warningsMauro Carvalho Chehab
anysee.c:44:5: warning: symbol 'dvb_usb_anysee_delsys' was not declared. Should it be static? cx24116.c:378:3: warning: symbol 'CX24116_MODFEC_MODES' was not declared. Should it be static? stb0899_algo.c:57:5: warning: symbol 'stb0899_get_srate' was not declared. Should it be static? stb0899_algo.c:766:6: warning: symbol 'Log2Int' was not declared. Should it be static? stb0899_drv.c:137:20: warning: symbol 'stb0899_quant_tab' was not declared. Should it be static? stb0899_drv.c:180:20: warning: symbol 'stb0899_est_tab' was not declared. Should it be static? stb0899_drv.c:220:5: warning: symbol '_stb0899_read_reg' was not declared. Should it be static? budget-ci.c:1348:23: warning: symbol 'tt3200_stb6100_config' was not declared. Should it be static? /home/v4l/master/v4l/cx25840-core.c:190:6: warning: symbol 'cx25840_work_handler' was not declared. Should it be static? /home/v4l/master/v4l/m5602_s5k83a.c:116:6: warning: symbol 's5k83a_dump_registers' was not declared. Should it be static? Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10109): anysee: Fix usage of an unitialized functionMauro Carvalho Chehab
drivers/media/dvb/dvb-usb/anysee.c: In function ‘anysee_master_xfer’: drivers/media/dvb/dvb-usb/anysee.c:156: warning: ‘ret’ may be used uninitialized By looking at the function, altrough very unlikely, this might eventually be true if num = 0. So, better to fix the warning by initializing with ret = 0. Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11V4L/DVB (9494): anysee: initialize anysee_usb_mutex staticallyAkinobu Mita
anysee_usb_mutex is initialized at every time the anysee device is probed. If the second anysee device is probed while anysee_usb_mutex is locked by the first anysee device, the mutex is broken. This patch fixes by initialize anysee_usb_mutex statically rather than initialize at probe time. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9141): anysee: support for Anysee E30 Combo PlusAntti Palosaari
- add module parameter for selecting DVB-T / DVB-C mode Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9140): anysee: unlock I2C-mutex in error caseAntti Palosaari
- unlock I2C-mutex also in error case Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-07-26V4L/DVB (8495): usb/anysee.c: make struct anysee_usb_mutex staticAdrian Bunk
This patch makes the needlessly global struct anysee_usb_mutex static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8032): Anysee: fix KconfigAntti Palosaari
- select DVB_PLL - fix typos in comments Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8031): Anysee: support for Anysee E30C Plus rev 0.4Antti Palosaari
- support for Anysee E30C Plus rev 0.4 - set IO port E - set correct TS mode - change deltaf according to latest Windows driver Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7914): Anysee: driver for Anysee DVB-T/C receiverAntti Palosaari
- driver for Anysee DVB-T/C receiver Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-02-10 23:32:18 +0000