summaryrefslogtreecommitdiffstats
path: root/drivers/media/dvb/siano
AgeCommit message (Collapse)Author
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-22[media] rc/keymaps: Rename Hauppauge table as rc-hauppaugeMauro Carvalho Chehab
There are two "hauppauge-new" keymaps, one with protocol unknown, and the other with the protocol marked accordingly. However, both tables are miss-named. Also, the old rc-hauppauge-new is broken, as it mixes three different controllers as if they were just one. This patch solves half of the problem by renaming the correct keycode table as just rc-hauppauge. This table contains the codes for the four different types of remote controllers found on Hauppauge cards, properly mapped with their different addresses. create mode 100644 drivers/media/rc/keymaps/rc-hauppauge.c delete mode 100644 drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c [Jarod: fix up RC_MAP_HAUPPAUGE defines] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com>
2010-12-29[media] media: Remove unnecessary casts of usb_get_intfdataJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc: Rename remote controller type to rc_type instead of ir_typeMauro Carvalho Chehab
for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,IR_TYPE,RC_TYPE,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_type,rc_type,g <$i >a && mv a $i; done Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc: rename the remaining things to rc_coreMauro Carvalho Chehab
The Remote Controller subsystem is meant to be used not only by Infra Red but also for similar types of Remote Controllers. The core is not specific to Infra Red. As such, rename: - ir-core.h to rc-core.h - IR_CORE to RC_CORE - namespace inside rc-core.c/rc-core.h To be consistent with the other changes. No functional change on this patch. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] ir-core: make struct rc_dev the primary interfaceDavid Härdeman
This patch merges the ir_input_dev and ir_dev_props structs into a single struct called rc_dev. The drivers and various functions in rc-core used by the drivers are also changed to use rc_dev as the primary interface when dealing with rc-core. This means that the input_dev is abstracted away from the drivers which is necessary if we ever want to support multiple input devs per rc device. The new API is similar to what the input subsystem uses, i.e: rc_device_alloc() rc_device_free() rc_device_register() rc_device_unregister() [mchehab@redhat.com: Fix compilation on mceusb and cx231xx, due to merge conflicts] Signed-off-by: David Härdeman <david@hardeman.nu> Acked-by: Jarod Wilson <jarod@redhat.com> Tested-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-25[media] IR: initialize ir_raw_event in few more driversMaxim Levitsky
Few drivers still have assumption that ir_raw_event consists of duration and pulse flag. Fix that. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: drivers/media/dvb/siano: Remove double testJulia Lawall
The same expression is tested twice and the result is the same each time. The sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @expression@ expression E; @@ ( * E || ... || E | * E && ... && E ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-27V4L/DVB: dvb: fix smscore_getbuffer() logicRichard Zidlicky
Drivers shouldn't sleep while holding a spinlock. A previous workaround were to release the spinlock before callinc schedule(). This patch uses a different approach: it just waits for the siano hardware to answer. Signed-off-by: Richard Zidlicky <rz@linux-m68k.org> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-12V4L/DVB: Fix IR_CORE dependenciesMauro Carvalho Chehab
As pointed by Randy Dunlap <randy.dunlap@oracle.com>: > ERROR: "ir_keydown" [drivers/media/video/ir-kbd-i2c.ko] undefined! > ERROR: "__ir_input_register" [drivers/media/video/ir-kbd-i2c.ko] undefined! > ERROR: "get_rc_map" [drivers/media/video/ir-kbd-i2c.ko] undefined! > ERROR: "ir_input_unregister" [drivers/media/video/ir-kbd-i2c.ko] undefined! > ERROR: "get_rc_map" [drivers/media/video/cx88/cx88xx.ko] undefined! > ERROR: "ir_repeat" [drivers/media/video/cx88/cx88xx.ko] undefined! > ERROR: "ir_input_unregister" [drivers/media/video/cx88/cx88xx.ko] undefined! > ERROR: "ir_keydown" [drivers/media/video/cx88/cx88xx.ko] undefined! > ERROR: "__ir_input_register" [drivers/media/video/cx88/cx88xx.ko] undefined! > ERROR: "get_rc_map" [drivers/media/video/bt8xx/bttv.ko] undefined! > ERROR: "ir_input_unregister" [drivers/media/video/bt8xx/bttv.ko] undefined! > ERROR: "__ir_input_register" [drivers/media/video/bt8xx/bttv.ko] undefined! > ERROR: "ir_g_keycode_from_table" [drivers/media/IR/ir-common.ko] undefined! > > > #5101: > (.text+0x8306e2): undefined reference to `ir_core_debug' > (.text+0x830729): undefined reference to `ir_core_debug' > ir-functions.c:(.text+0x830906): undefined reference to `ir_core_debug' > (.text+0x8309d8): undefined reference to `ir_g_keycode_from_table' > (.text+0x830acf): undefined reference to `ir_core_debug' > (.text+0x830b92): undefined reference to `ir_core_debug' > (.text+0x830bef): undefined reference to `ir_core_debug' > (.text+0x830c6a): undefined reference to `ir_core_debug' > (.text+0x830cf7): undefined reference to `ir_core_debug' > budget-ci.c:(.text+0x89f5c8): undefined reference to `ir_keydown' > budget-ci.c:(.text+0x8a0c58): undefined reference to `get_rc_map' > budget-ci.c:(.text+0x8a0c80): undefined reference to `__ir_input_register' > budget-ci.c:(.text+0x8a0ee0): undefined reference to `get_rc_map' > budget-ci.c:(.text+0x8a11cd): undefined reference to `ir_input_unregister' > (.text+0x8a8adb): undefined reference to `ir_input_unregister' > dvb-usb-remote.c:(.text+0x8a9188): undefined reference to `get_rc_map' > dvb-usb-remote.c:(.text+0x8a91b1): undefined reference to `__ir_input_register' > dvb-usb-remote.c:(.text+0x8a9238): undefined reference to `get_rc_map' > dib0700_core.c:(.text+0x8b04ca): undefined reference to `ir_keydown' > dib0700_devices.c:(.text+0x8b2ea8): undefined reference to `ir_keydown' > dib0700_devices.c:(.text+0x8b2ef0): undefined reference to `ir_keydown' Those breakages seem to be caused by two bad things at IR_CORE Kconfig: 1) cx23885 is using select for IR_CORE; 2) the dvb-usb and sms dependency for IR_CORE were missing. While here, allow users to un-select IR. Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-08V4L/DVB: dvb: siano: free spinlock before schedule()Kulikov Vasiliy
Calling schedule() holding spinlock with disables irqs is improper. As spinlock protects list coredev->buffers, it can be unlocked untill wakeup. This bug was introduced in a9349315f65cd6a16e8fab1f6cf0fd40f379c4db. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-04Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits) Documentation: update broken web addresses. fix comment typo "choosed" -> "chosen" hostap:hostap_hw.c Fix typo in comment Fix spelling contorller -> controller in comments Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault fs/Kconfig: Fix typo Userpace -> Userspace Removing dead MACH_U300_BS26 drivers/infiniband: Remove unnecessary casts of private_data fs/ocfs2: Remove unnecessary casts of private_data libfc: use ARRAY_SIZE scsi: bfa: use ARRAY_SIZE drm: i915: use ARRAY_SIZE drm: drm_edid: use ARRAY_SIZE synclink: use ARRAY_SIZE block: cciss: use ARRAY_SIZE comment typo fixes: charater => character fix comment typos concerning "challenge" arm: plat-spear: fix typo in kerneldoc reiserfs: typo comment fix update email address ...
2010-08-02V4L/DVB: sms: Convert IR support to use the Remote Controller coreMauro Carvalho Chehab
Rewrites the siano IR implementation. The previous implementation were non-standard. As such, it has issues if more than one device registers IR, as there used to have some static constants used during protocol decoding phase. Also, it used to implement its on RAW decoder, and only for RC5. The new code uses RC core subsystem for handling IR. This brings several new features to the driver, including: - Allow to dynamically replace the IR keycodes; - Supports all existing raw decoders (JVC, NEC, RC-5, RC-6, SONY); - Supports lirc dev; - Doesn't have race conditions when more than one sms IR is registered; - The code size for the IR implementation is very small; - it exports the IR features via /sys/class/rc. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: sms: properly initialize IR phys and IR nameMauro Carvalho Chehab
sms were using a non-compliant nomenclature for the USB devices. Fix it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: smsusb: enable IR port for Hauppauge WinTV MiniStickMauro Carvalho Chehab
Add the proper gpio port for WinTV MiniStick, with the information provided by Michael. Thanks-to: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: smscoreapi/w9968cf: drivers/media: Remove unnecesary kmalloc castsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-16fix typos concerning "management"Uwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-02-26V4L/DVB: smsir: make local variables staticMárton Németh
Make the file local parameters static. This will remove the following sparse warnings (see "make C=1"): * warning: symbol 'ir_pos' was not declared. Should it be static? * warning: symbol 'ir_word' was not declared. Should it be static? * warning: symbol 'ir_toggle' was not declared. Should it be static? Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13963): siano, fix memory leakJiri Slaby
Stanse found a memory leak in smscore_gpio_configure. buffer is not freed/assigned on all paths. Fix that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13848): smsdvb: Add the proper status for IsRfLockedMauro Carvalho Chehab
Now, if RF is locked but demod is not locked, it will report: >>> tuning status == 0x03 This happens, for example, if the device is on DVB-T, and the video standard is ISDB-T. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13847): smsdvb: Remove a wrong debug messageMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13846): smsdvb: Properly implement stats for both DVB and ISDB-TMauro Carvalho Chehab
After taking a look at the driver's history and doing some tests with DVB and ISDB-T, it was noticed that the stats were incomplete, for ISDB-T, and weren't working for DVB. Fixed the code and added a debug code to print the complete stats at dmesg. This debug is useful to improve the stats of this driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13845): smsdvb: Fix the frequency switch that broke with v5 API ↵Mauro Carvalho Chehab
conversion Bandwidth is in Hz, not in kHz. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13844): smsdvb: Properly report the Delivery SystemMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13842): smsdvb: Convert it to use DVB API v5 (S2API)Mauro Carvalho Chehab
Based on a patch originally written by Michael Krufky <mkrufky@linuxtv.org> for a preliminar S2API spec. The patch were ported to the S2API and had the ISDB-T API additions to honor the auto mode, while keep allowing manual tuning. Tested with both the original dvb-apps and the new dvb-apps-isdbt scan, that uses a different channel.conf and uses S2API with ISDB-T extensions. Thanks-to: Michael Krufky <mkrufky@linuxtv.org> for his first version Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13841): smsdvb: Make stats to workMauro Carvalho Chehab
Siano series of patches seemed to cause a regression on reporting DTV statistics. Due to that, signal indication weren't received, preventing applications like scan to work. Tested with ISDB-T signals and got the same scan result as with a dib0700/dib8000 device. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13840): smsusb: Add ISDB-T firmware for Hauppauge ↵Michael Krufky
WinTV-Nova-T-MiniStick Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13839): smsdvb: add ISDB-T as DVB-T tuning support hackMichael Krufky
Activate ISDB-T mode using module option default_mode=6. hack: use 4 lower bits in frequency for segment number [mchehab@redhat.com: fix merge conflicts and CodingStyle] Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13683): sanio-ms: clean up init, exit and id_tableMárton Németh
MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Make module_init static and mark it with __init. Make module_exit static and mark it with __exit. Mark probe functions with __devinit. Make id table static and mark with __devinitconst. This will eliminate the following sparse warnings (see "make C=1"): * smsdvb.c:668:5: warning: symbol 'smsdvb_module_init' was not declared. Should it be static? * smsdvb.c:682:6: warning: symbol 'smsdvb_module_exit' was not declared. Should it be static? * smsusb.c:491:22: warning: symbol 'smsusb_id_table' was not declared. Should it be static? * smsusb.c:567:5: warning: symbol 'smsusb_module_init' was not declared. Should it be static? * smsusb.c:578:6: warning: symbol 'smsusb_module_exit' was not declared. Should it be static? * smssdio.c:341:5: warning: symbol 'smssdio_module_init' was not declared. Should it be static? * smssdio.c:353:6: warning: symbol 'smssdio_module_exit' was not declared. Should it be static? Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13569): smsusb: add autodetection support for five additional ↵Michael Krufky
Hauppauge USB IDs Add support for five new Hauppauge Device USB IDs: 2040:b980 2040:b990 2040:c010 2040:c080 2040:c090 Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13416): smssdio: initialize return valueMárton Németh
The return value may be used uninitialized when the size parameter happens to be 0. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13380): sms-cards: make id unsigned in sms_get_board()Roel Kluin
Make id signed so we can't get an invalid pointer when we pass a negative id. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13295): sms1xxx: load smsdvb also for the hauppauge tiger cardsÉric Piel
load smsdvb also for the hauppauge tiger cards [dougsland@redhat.com: fixed rejects due changes in sms-cards.c] Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Acked-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13241): Cleanup redundant tests on unsignedRoel Kluin
The variables are unsigned so the test `>= 0' is always true, the `< 0' test always fails. In these cases the other part of the test catches wrapped values. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-11-27V4L/DVB (13412): SMS_SIANO_MDTV should depend on HAS_DMAGeert Uytterhoeven
When building for Sun 3: drivers/built-in.o: In function `smscore_unregister_device': drivers/media/dvb/siano/smscoreapi.c:723: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `smscore_register_device': drivers/media/dvb/siano/smscoreapi.c:365: undefined reference to `dma_alloc_coherent' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-11-07V4L/DVB (13202): smsusb: add autodetection support for three additional ↵Michael Krufky
Hauppauge USB IDs Add support for three new Hauppauge Device USB IDs: 2040:b900 2040:b910 2040:c000 Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-21trivial: fix typos "man[ae]g?ment" -> "management"Uwe Kleine-Koenig
Signed-off-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-08-31V4L/DVB (12451): Update KConfig File to enable SDIO and USB interfacesUdi Atar
Update KConfig file to enbale selection of SDIO and USB interfaces, and add dependancy on relevant modules. [mchehab@redhat.com: fix merge conflicts, remove default: m, add missing endmenu] Signed-off-by: Udi Atar <udia@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12450): Siano: Fixed SDIO compilation bugsUdi Atar
Fixed SDIO compilation bugs Also fixed a memory overrun issue in buffer management. Signed-off-by: Udi Atar <udia@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12446): sms1xxx: restore GPIO functionality for all Hauppauge devicesMichael Krufky
Previous changesets broke Hauppauge devices and their GPIO configurations. This changeset restores the LED & LNA functionality. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12441): siano: read buffer overflowRoel Kluin
With mode DEVICE_MODE_RAW_TUNER a read occurs past the end of smscore_fw_lkup[]. Subsequently an attempt is made to load the firmware from the resulting filename. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12437): dvb: siano uses/depends on INPUTRandy Dunlap
siano uses input_*() functions so it should depend on INPUT to prevent build errors: ERROR: "input_event" [drivers/media/dvb/siano/sms1xxx.ko] undefined! ERROR: "input_register_device" [drivers/media/dvb/siano/sms1xxx.ko] undefined! ERROR: "input_free_device" [drivers/media/dvb/siano/sms1xxx.ko] undefined! ERROR: "input_unregister_device" [drivers/media/dvb/siano/sms1xxx.ko] undefined! ERROR: "input_allocate_device" [drivers/media/dvb/siano/sms1xxx.ko] undefined! Cc: Michael Krufky <mkrufky@linuxtv.org> Cc: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12386): sms1xxx: fix build warning: unused variable 'board'Michael Krufky
Remove the following build warning: sms-cards.c: In function 'sms_board_event': sms-cards.c:120: warning: unused variable 'board' Thanks to Hans Verkuil for pointing this out. The problem code has been #if 0'd for now, this will likely be used again in the future, once the event interface is complete. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12374): sms1xxx: fix broken Hauppauge devicesMichael Krufky
The current GPIO configuration breaks all Hauppauge devices. The code being removed affects Hauppauge devices only, and is the cause of the breakage. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (12107): smscoreapi: fix compile warningHans Verkuil
gcc 4.3.1 generates this warning: v4l/smscoreapi.c: In function 'smscore_gpio_configure': v4l/smscoreapi.c:1481: warning: 'GroupNum' may be used uninitialized in this function v4l/smscoreapi.c:1480: warning: 'TranslatedPinNum' may be used uninitialized in this function While in practice this will not happen, it is something that the compiler can't determine. Initializing these two local variables to 0 suppresses this warning. Cc: Udi Atar <udi.linuxtv@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11892): Siano: smsendian - declare function as externUri Shkolnik
Declare the object function as 'extern' Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11891): Siano: smscore - bind the GPIO SMS protocolUri Shkolnik
Bind SMS protocol commands to the GPIO commands Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11890): Siano: smscore - remove redundant codeUri Shkolnik
remove redundant code, which in the past handled the various components (now independent modules) registrations. Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11889): Siano: smsdvb - add DVB v3 eventsUri Shkolnik
Add various DVB-API v3 events, those events will trig target (card) events. Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-25 06:42:29 +0000