summaryrefslogtreecommitdiffstats
path: root/drivers/media/pci/saa7134/saa7134.h
AgeCommit message (Collapse)Author
2014-05-23[media] saa7134: add saa7134_userptr module option to enable USERPTRHans Verkuil
If the saa7134 module is loaded with the saa7134_userptr set to 1, then USERPTR support is enabled. A check in buffer_prepare verifies that the pointer is page-aligned. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-23[media] saa7134: convert to vb2Hans Verkuil
Convert the saa7134 driver to vb2. Note that while this uses the vb2-dma-sg version, the VB2_USERPTR mode is disabled. The DMA hardware only supports DMAing full pages, and in the USERPTR memory model the first and last scatter-gather buffer is almost never a full page. In practice this means that we can't use the VB2_USERPTR mode. This has been tested with raw video, compressed video, VBI, radio, DVB and video overlays. Unfortunately, a vb2 conversion is one of those things you cannot split up in smaller patches, it's all or nothing. This patch switches the whole driver over to vb2, using the vb2 ioctl and fop helper functions. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-23[media] saa7134: move saa7134_pgtable to saa7134_dmaqueueHans Verkuil
All dmaqueue's use saa7134_pgtable, so move it into struct saa7134_dmaqueue. The videobuf_queue priv_data field now points to the dmaqueue struct. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-23[media] saa7134: rename vbi/cap to vbi_vbq/cap_vbqHans Verkuil
Use consistent _vbq suffix for videobuf_queue fields. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-23[media] saa7134: add vidioc_querystdMikhail Domrachev
Signed-off-by: Mikhail Domrachev <mihail.domrychev@comexp.ru> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-13[media] saa7134: rename empress_tsq to empress_vbqHans Verkuil
Create consistent _vbq suffix for videobuf_queue fields. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-13[media] saa7134: remove fmt from saa7134_bufHans Verkuil
This is already available from saa7134_dev. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-13[media] saa7134: store VBI hlen/vlen globallyHans Verkuil
Don't calculate this for every buffer, store it globally instead. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-13[media] saa7134: drop abuse of low-level videobuf functionsHans Verkuil
saa7134-alsa used low-level videobuf functions to allocate and sync DMA buffers. Replace this with saa7134-specific code. These functions will not be available when we convert to vb2. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-07[media] saa7134: share resource management between normal and empress nodesHans Verkuil
The empress video node can share resource management with the normal video nodes, thus allowing for code sharing and making the empress node non-exclusive. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-07[media] saa7134: remove dev from saa7134_fh, use saa7134_fh for empress nodeHans Verkuil
Use the saa7134_fh struct for the empress video node as well, drop the dev pointer from that struct since we can use drvdata for that. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-07[media] saa7134: cleanup radio/video/empress ioctl handlingHans Verkuil
The video and empress nodes can share various ioctls. Drop the input/std ioctls from the radio node (out of spec). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-07[media] saa7134: convert to the control frameworkHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-07[media] saa7134: move the queue data from saa7134_fh to saa7134_devHans Verkuil
These fields are global, not per-filehandle. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-06-17[media] saa7134: move qos_request from saa7134_fh to saa7134_devHans Verkuil
This is a global field, not a per-filehandle field. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-17[media] saa7134: move fmt/width/height from saa7134_fh to saa7134_devHans Verkuil
These fields are global, not per-filehandle. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-17[media] saa7134: move the overlay fields from saa7134_fh to saa7134_devHans Verkuil
This is global data, not per-filehandle data. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-17[media] saa7134: remove radio/type field from saa7134_fhHans Verkuil
This information is already available in vfl_type in video_device. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-14[media] saa7134: v4l2-compliance: return real frequencyOndrej Zary
Make saa7134 driver more V4L2 compliant: don't cache frequency in s_frequency/g_frequency but return real one instead Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-14[media] saa7134: v4l2-compliance: use v4l2_fh to fix priority handlingOndrej Zary
Make saa7134 driver more V4L2 compliant: remove broken priority handling and use v4l2_fh instead Signed-off-by: Ondrej Zary <linux@rainbow-software.org> [hans.verkuil@cisco.com: fixed a merge conflict in saa7134.h] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-08[media] saa7134: Add AverMedia A706 AverTV Satellite Hybrid+FMOndrej Zary
Add AverMedia AverTV Satellite Hybrid+FM (A706) card to saa7134 driver. Working: analog inputs, TV, FM radio and IR remote control. Untested: DVB-S. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-08[media] tuner-core: Change config from unsigned int to void *Ondrej Zary
config looks like a hack that was added to tuner-core to allow some configuration of TDA8290 tuner (it's not used by any other driver). But with the new configuration options of tda8290 driver (no_i2c_gate and std_map), it's no longer sufficient. Change config to be void * instead, which allows passing tuner-dependent config struct to drivers. Also update saa7134 driver to reflect this change (no other driver uses this). Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] v4l2: pass std by value to the write-only s_std ioctlHans Verkuil
This ioctl is defined as IOW, so pass the argument by value instead of by reference. I could have chosen to add const instead, but this is 1) easier to handle in drivers and 2) consistent with the s_std subdev operation. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-08[media] saa7134: Add capture card Hawell HW-9004V1Vadim Frolov
This patch adds new capture board Hawell HW-9004V1. This card has 4 SAA71300 chips. In order to work it is needed to initialize its registers (gpio mask and value). The value of these registers were dumped under Windows using flytest. Signed-off-by: Vadim Frolov <fralik@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-06[media] [V2,02/24] pci/saa7134/saa7134.h: use IS_ENABLED() macroPeter Senna Tschudin
replace: #if defined(CONFIG_VIDEO_SAA7134_DVB) || \ defined(CONFIG_VIDEO_SAA7134_DVB_MODULE) with: #if IS_ENABLED(CONFIG_VIDEO_SAA7134_DVB) This change was made for: CONFIG_VIDEO_SAA7134_DVB Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-24Merge branch 'v4l_for_linus' into staging/for_v3.9Mauro Carvalho Chehab
* v4l_for_linus: (464 commits) [media] uvcvideo: Set error_idx properly for S_EXT_CTRLS failures [media] uvcvideo: Cleanup leftovers of partial revert [media] uvcvideo: Return -EACCES when trying to set a read-only control Linux 3.8-rc3 mm: reinstante dropped pmd_trans_splitting() check cred: Remove tgcred pointer from struct cred drm/ttm: fix fence locking in ttm_buffer_object_transfer ARM: clps711x: Fix bad merge of clockevents setup ARM: highbank: save and restore L2 cache and GIC on suspend ARM: highbank: add a power request clear ARM: highbank: fix secondary boot and hotplug ARM: highbank: fix typos with hignbank in power request functions ARM: dts: fix highbank cpu mpidr values ARM: dts: add device_type prop to cpu nodes on Calxeda platforms drm/prime: drop reference on imported dma-buf come from gem xen/netfront: improve truesize tracking ARM: mx5: Fix MX53 flexcan2 clock ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array sctp: fix Kconfig bug in default cookie hmac selection EDAC: Cleanup device deregistering path ... Conflicts: drivers/media/pci/dm1105/dm1105.c drivers/media/platform/soc_camera/mx2_camera.c
2013-01-03Drivers: media: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-27[media] saa7134: Add pm_qos_request to fix video corruptionSimon Farnsworth
The SAA7134 appears to have trouble buffering more than one line of video when doing DMA. Rather than try to fix the driver to cope (as has been done by Andy Walls for the cx18 driver), put in a pm_qos_request to limit deep sleep exit latencies. The visible effect of not having this is that seemingly random lines are only partly transferred - if you feed in a static image, you see a portion of the image "flicker" into place. [mchehab@redhat.com: Fix ABI breakage due to some renames at pm_qos] Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15[media] rename most media/video pci drivers to media/pciMauro Carvalho Chehab
Rename all PCI drivers with their own directory under drivers/media/video into drivers/media/pci and update the building system. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-27 21:25:12 +0000