summaryrefslogtreecommitdiffstats
path: root/drivers/media/rc
AgeCommit message (Collapse)Author
2010-12-31[media] ir-nec-decoder: fix repeat key issueMariusz Białończyk
Fixing the problem with NEC protocol and repeating keys under the following circumstances. The problem occurs when there is a repeat code without properly decoded scancode. This leads to repeat the wrong (last decoded) scancode. An example from real life: I am pressing volume down, then several minutes later i am pressing volume up, but the real scancode is wrongly decoded and only a repeat event is emitted, so as a result volume is going down while i am holding volume up button. The patch fixes above problem using rc_keyup timeout (as pointed by Mauro). It just prevents key repeats if they appear after rc_keyup. Signed-off-by: Mariusz Białończyk <manio@skyboo.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] saa7134: Add support for Compro VideoMate Vista M1FRamiro Morales
Signed-off-by: Pavel Osnova <pvosnova@gmail.com> Signed-off-by: Ramiro Morales <ramiro@rmorales.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] MEDIA: RC: Provide full scancodes for TT-1500 remote controlDavid Henningsson
Add 0x15 prefix to scancodes for TT-1500 remote control. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] streamzap: Fix a compilation warning when compiled builtinMauro Carvalho Chehab
drivers/media/rc/streamzap.c: In function ‘streamzap_probe’: drivers/media/rc/streamzap.c:460:2: warning: statement with no effect Cc: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc: ir-lirc-codec: fix potential integer overflowVasiliy Kulikov
'n' may be bigger than MAX_INT*sizeof(int), if so checking of truncated (int)(n/sizeof(int)) for LIRCBUF_SIZE overflow and then using nontruncated 'count' doesn't make sense. Also n may be up to sizeof(int)-1 bytes bigger than expected, so check value of (n % sizeof(int)) too. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] Add a keymap for Pixelview 002-T remoteMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] keycodes for DSR-0112 remote bundled with Haupauge MiniStickRichard Zidlicky
Add kycodes for DSR-0112 remote that comes together with Haupauge MiniStick http://lirc.sourceforge.net/remotes/hauppauge/DSR-0112.jpg [mchehab@redhat.com: Fix KEY_PREVIOUS to match the definition for the other model] Signed-off-by: Richard Zidlicky <rz@linux-m68k.org> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] media: Remove unnecessary casts of usb_get_intfdataJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] media: rc: lirc_dev: check kobject_set_name() resultVasiliy Kulikov
kobject_set_name() may fail with -ENOMEM, check for it. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc-core: add loopback driverDavid Härdeman
This patch adds a loopback driver to rc-core which I've found useful for running scripted tests of different parts of rc-core without having to fiddle with real hardware. Basically it emulates hardware with a learning and a non-learning receiver and two transmitters (which correspond to the two receivers). TX data that is sent is fed back as input on the corresponding receiver, which allows for debugging of IR decoders, keymaps, etc. Signed-off-by: David Härdeman <david@hardeman.nu> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc-core: Initialize return value to zeroMauro Carvalho Chehab
At ir_setkeycode, if INPUT_KEYMAP_BY_INDEX is used, the routine may return an invalid value if not error. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc: fix sysfs entry for mceusb and streamzapPaul Bender
When trying to create persistent device names for mceusb and streamzap devices, I noticed that their respective drivers are not creating the rc device as a child of the USB device. Rather it creates it as virtual device. As a result, udev cannot use the USB device information to create persistent device names for event and lirc devices associated with the rc device. Not having persistent device names makes it more difficult to make use of the devices in userspace as their names can change. Forward-ported to media_tree staging/for_v2.6.38 and tested with both streamzap and mceusb devices: $ ll /dev/input/by-id/ ... lrwxrwxrwx. 1 root root 9 Nov 17 17:06 usb-Streamzap__Inc._Streamzap_Remote_Control-event-if00 -> ../event6 lrwxrwxrwx. 1 root root 9 Nov 17 17:05 usb-Topseed_Technology_Corp._eHome_Infrared_Transceiver_TS000BzY-event-if00 -> ../event5 Previously, nada. Signed-off-by: Paul Bender <pebender@gmail.com> Tested-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] drivers/media: nuvoton: fix chip id probe v2Nicolas Kaiser
Make sure we have a matching chip id high and one or the other of the chip id low values. Print the values if the probe fails. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] Fix rc-tbs-nec table after converting the cx88 driver to ir-coreMariusz Białończyk
The patch fixes the rc-tbs-nec table after converting drivers/media/video/cx88 to ir-core (commit ba7e90c9f878e0ac3c0614a5446fe5c62ccc33ec). It is also adds two missing buttons (10- and 10+) with its definition (KEY_10CHANNELSUP and KEY_10CHANNELSDOWN). [mchehab@redhat.com: move keycode numbers to 0x1b8/0x1b9 as requested by the input Maintainer] Signed-off-by: Mariusz Białończyk <manio@skyboo.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] lirc_dev: add some __user annotationsDan Carpenter
Sparse complains because there are no __user annotations. drivers/media/rc/lirc_dev.c:156:27: warning: incorrect type in initializer (incompatible argument 2 (different address spaces)) drivers/media/rc/lirc_dev.c:156:27: expected int ( *read )( ... ) drivers/media/rc/lirc_dev.c:156:27: got int ( extern [toplevel] *<noident> )( ... ) Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc-core: fix some leftovers from the renaming patchesDavid Härdeman
Fix some minor comments etc which are leftover from the old naming scheme. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] saa7134: use full keycode for BeholdTVDavid Härdeman
Using the full keycode for BeholdTV hardware makes another module parameter unnecessary. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc: Rename IR raw interface to ir-raw.cMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc: use rc_map_ prefix for all rc map tablesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc: Name RC keymap tables as rc_map_tableMauro Carvalho Chehab
Remote keytables had different names all over the place. Part of the fault is due to a bad naming when rc subsystem was created, but there were lots of old names that were still here. Use a common standard for everything. Patch generated by this script: for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_scancode,rc_map_table,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_codes_,rc_map_,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,rc_key_map,rc_map_table,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,rc_map_table_size,rc_map_size,g <$i >a && mv a $i; done Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc: Properly name the rc_map structMauro Carvalho Chehab
The struct that describes a rc mapping had an weird and long name. We should properly name it, to make easier for developers to work with it, and to avoid confusion. Basically, generated by this script: for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_scancode_table,rc_map,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,rc_tab,rc_map,g <$i >a && mv a $i; done (and manually fixed where needed) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc: Rename remote controller type to rc_type instead of ir_typeMauro Carvalho Chehab
for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,IR_TYPE,RC_TYPE,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_type,rc_type,g <$i >a && mv a $i; done Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] Rename all public generic RC functions from ir_ to rc_Mauro Carvalho Chehab
Those functions are not InfraRed specific. So, rename them to properly reflect it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc: rename the remaining things to rc_coreMauro Carvalho Chehab
The Remote Controller subsystem is meant to be used not only by Infra Red but also for similar types of Remote Controllers. The core is not specific to Infra Red. As such, rename: - ir-core.h to rc-core.h - IR_CORE to RC_CORE - namespace inside rc-core.c/rc-core.h To be consistent with the other changes. No functional change on this patch. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc: remove ir-common moduleMauro Carvalho Chehab
Something weird happened with commit 740069e6e043403199dbe2b42256722fb814f6ae. Instead of dong the right thing, it got somehow corrupted and reverted the rc changes. Thanks to David Härdeman for pointing me about the problem. This patch should be merged with 740069e6e04 before sending upstream. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc-core: convert winbond-cirDavid Härdeman
Move winbond-cir from drivers/input/misc/ into drivers/media/rc/ and convert it to use rc-core. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] ir-core: make struct rc_dev the primary interfaceDavid Härdeman
This patch merges the ir_input_dev and ir_dev_props structs into a single struct called rc_dev. The drivers and various functions in rc-core used by the drivers are also changed to use rc_dev as the primary interface when dealing with rc-core. This means that the input_dev is abstracted away from the drivers which is necessary if we ever want to support multiple input devs per rc device. The new API is similar to what the input subsystem uses, i.e: rc_device_alloc() rc_device_free() rc_device_register() rc_device_unregister() [mchehab@redhat.com: Fix compilation on mceusb and cx231xx, due to merge conflicts] Signed-off-by: David Härdeman <david@hardeman.nu> Acked-by: Jarod Wilson <jarod@redhat.com> Tested-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc-core: Code cleanup after merging rc-sysfs and rc-map into rc-mainDavid Härdeman
[mchehab@redhat.com: this patch were originally bundled with some renaming stuff and with the file merges, as seen at: https://patchwork.kernel.org/patch/291092/. Instead of using the original approach, I wrote the rename patches and the code merge as separate changes, then applied the difference on this patch. This way, it is easier to see the real changes at the code, and will be easier to merge upstream, especially if some conflict rises on the renaming patches] Signed-off-by: David Härdeman <david@hardeman.nu> Acked-by: Jarod Wilson <jarod@redhat.com> Tested-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc-core: merge rc-map.c into rc-main.cMauro Carvalho Chehab
With this change, all rc-core functions are into just one file, except for the rc-raw specific functions. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc-core: Merge rc-sysfs.c into rc-main.cMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] Rename rc-core files from ir- to rc-Mauro Carvalho Chehab
As protocol decoders are specific to InfraRed, keep their names as-is. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rename drivers/media/IR to drives/media/rcMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>