summaryrefslogtreecommitdiffstats
path: root/drivers/media/usb
AgeCommit message (Collapse)Author
2012-10-12Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull second set of media updates from Mauro Carvalho Chehab: "Despite its size, most of the stuff here is trivial. This series contains: - s5p-mfc: additions at the driver and at the core to support H.264 hardware codec; - Some improvements at s5p and davinci embedded drivers; - Some V4L2 compliance fixes applied on a few drivers; - Several random trivial patches, including several fixes and a few new board support additions; Notes: 1) Some Exynos media patches were dependent on some -arm fixes that got merged on changeset 782cd9e. That's why this pull request is based that changeset. 2) As promised, I reviewed the pending VB2 DMABUF series. While setting a test environment, it was noticed that the upstream support for Samsung Exynos 4 boards (smdk310 and Origen) are broken upstream, likely due to regressions: both defconfigs are wrong and regulator settings for both boards are broken. That, allied with some bug at the dummy regulator driver, causes OOPSes during boot time. Long story short: even fixing the above, the proposed patches OOPSed when running the DMABUF test. Not sure yet if the OOPSes are due to some other undetected regressions, or due to some bug on the patches. Due to the above, DMABUF patches for vb2 got NACKed for 3.7." * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (109 commits) [media] m5mols: Add missing #include <linux/sizes.h> [media] stk1160: Add support for S-Video input Revert "[media] omap3isp: Replace cpu_is_omap3630() with ISP revision check" [media] dvb: LNA implementation changes [media] v4l2-ioctl: fix W=1 warnings [media] v4l2-ioctl: add blocks check for VIDIOC_SUBDEV_G/S_EDID [media] omap3isp: Fix compilation error in ispreg.h [media] rc-msi-digivox-ii: Add full scan keycodes [media] cx25821: testing the wrong variable [media] tda18271-common: hold the I2C adapter during write transfers [media] ds3000: add module parameter to force firmware upload [media] drivers/media: Remove unnecessary semicolon [media] winbond: remove space from driver name [media] iguanair: cannot send data from the stack [media] omap3isp: Replace cpu_is_omap3630() with ISP revision check [media] dvb-usb: print small buffers via %*ph [media] uvc: Add return code check at vb2_queue_init() [media] em28xx: Replace memcpy with struct assignment [media] bt8xx: Add video4linux control V4L2_CID_COLOR_KILLER [media] mem2mem_testdev: Use devm_kzalloc() in probe ... Conflicts: arch/arm/mach-davinci/include/mach/da8xx.h
2012-10-11Merge branch 'staging/for_v3.7' into v4l_for_linusMauro Carvalho Chehab
Applied on the top of changeset 782cd9e, as some of those patches depend on some fixes that went via -arm tree. * staging/for_v3.7: (109 commits) [media] m5mols: Add missing #include <linux/sizes.h> [media] stk1160: Add support for S-Video input Revert "[media] omap3isp: Replace cpu_is_omap3630() with ISP revision check" [media] dvb: LNA implementation changes [media] v4l2-ioctl: fix W=1 warnings [media] v4l2-ioctl: add blocks check for VIDIOC_SUBDEV_G/S_EDID [media] omap3isp: Fix compilation error in ispreg.h [media] rc-msi-digivox-ii: Add full scan keycodes [media] cx25821: testing the wrong variable [media] tda18271-common: hold the I2C adapter during write transfers [media] ds3000: add module parameter to force firmware upload [media] drivers/media: Remove unnecessary semicolon [media] winbond: remove space from driver name [media] iguanair: cannot send data from the stack [media] omap3isp: Replace cpu_is_omap3630() with ISP revision check [media] dvb-usb: print small buffers via %*ph [media] uvc: Add return code check at vb2_queue_init() [media] em28xx: Replace memcpy with struct assignment [media] bt8xx: Add video4linux control V4L2_CID_COLOR_KILLER [media] mem2mem_testdev: Use devm_kzalloc() in probe ...
2012-10-09[media] stk1160: Add support for S-Video inputEzequiel Garcia
In order to fully replace easycap driver with stk1160, it's also necessary to add S-Video support. A similar patch backported for v3.2 kernel has been tested by three different users. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-09mm: kill vma flag VM_RESERVED and mm->reserved_vm counterKonstantin Khlebnikov
A long time ago, in v2.4, VM_RESERVED kept swapout process off VMA, currently it lost original meaning but still has some effects: | effect | alternative flags -+------------------------+--------------------------------------------- 1| account as reserved_vm | VM_IO 2| skip in core dump | VM_IO, VM_DONTDUMP 3| do not merge or expand | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP 4| do not mlock | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP This patch removes reserved_vm counter from mm_struct. Seems like nobody cares about it, it does not exported into userspace directly, it only reduces total_vm showed in proc. Thus VM_RESERVED can be replaced with VM_IO or pair VM_DONTEXPAND | VM_DONTDUMP. remap_pfn_range() and io_remap_pfn_range() set VM_IO|VM_DONTEXPAND|VM_DONTDUMP. remap_vmalloc_range() set VM_DONTEXPAND | VM_DONTDUMP. [akpm@linux-foundation.org: drivers/vfio/pci/vfio_pci.c fixup] Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-07[media] dvb: LNA implementation changesAntti Palosaari
* use dvb property cache * implement get (thus API minor++) * PCTV 290e: 1=LNA ON, all the other values LNA OFF Also fix PCTV 290e LNA comment, it is disabled by default Hans and Mauro proposed use of cache implementation of get as they were planning to extend LNA usage for analog side too. Reported-by: Hans Verkuil <hverkuil@xs4all.nl> Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-07[media] drivers/media: Remove unnecessary semicolonPeter Senna Tschudin
A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r1@ statement S; position p,p1; @@ S@p1;@p @script:python r2@ p << r1.p; p1 << r1.p1; @@ if p[0].line != p1[0].line_end: cocci.include_match(False) @@ position r1.p; @@ -;@p // </smpl> [mchehab@redhat.com: some hunks got bitroted; applied only the ones that succeeds] Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> [crope@iki.fi: For my drivers a8293, af9013, af9015, af9035] Acked-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-07Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "The first part of the media updates for Kernel 3.7. This series contain: - A major tree renaming patch series: now, drivers are organized internally by their used bus, instead of by V4L2 and/or DVB API, providing a cleaner driver location for hybrid drivers that implement both APIs, and allowing to cleanup the Kconfig items and make them more intuitive for the end user; - Media Kernel developers are typically very lazy with their duties of keeping the MAINTAINERS entries for their drivers updated. As now the tree is more organized, we're doing an effort to add/update those entries for the drivers that aren't currently orphan; - Several DVB USB drivers got moved to a new DVB USB v2 core; the new core fixes several bugs (as the existing one that got bitroted). Now, suspend/resume finally started to work fine (at least with some devices - we should expect more work with regards to it); - added multistream support for DVB-T2, and unified the API for DVB-S2 and ISDB-S. Backward binary support is preserved; - as usual, a few new drivers, some V4L2 core improvements and lots of drivers improvements and fixes. There are some points to notice on this series: 1) you should expect a trivial merge conflict on your tree, with the removal of Documentation/feature-removal-schedule.txt: this series would be adding two additional entries there. I opted to not rebase it due to this recent change; 2) With regards to the PCTV 520e udev-related breakage, I opted to fix it in a way that the patches can be backported to 3.5 even without your firmware fix patch. This way, Greg doesn't need to rush backporting your patch (as there are still the firmware cache and firmware path customization issues to be addressed there). I'll send later a patch (likely after the end of the merge window) reverting the rest of the DRX-K async firmware request, fully restoring its original behaviour to allow media drivers to initialize everything serialized as before for 3.7 and upper. 3) I'm planning to work on this weekend to test the DMABUF patches for V4L2. The patches are on my queue for several Kernel cycles, but, up to now, there is/was no way to test the series locally. I have some concerns about this particular changeset with regards to security issues, and with regards to the replacement of the old VIDIOC_OVERLAY ioctl's that is broken on modern systems, due to GPU drivers change. The Overlay API allows direct PCI2PCI transfers from a media capture card into the GPU framebuffer, but its API is crappy. Also, the only existing X11 driver that implements it requires a XV extension that is not available anymore on modern drivers. The DMABUF can do the same thing, but with it is promising to be a properly-designed API. If I can successfully test this series and be happy with it, I should be asking you to pull them next week." * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (717 commits) em28xx: regression fix: use DRX-K sync firmware requests on em28xx drxk: allow loading firmware synchrousnously em28xx: Make all em28xx extensions to be initialized asynchronously [media] tda18271: properly report read errors in tda18271_get_id [media] tda18271: delay IR & RF calibration until init() if delay_cal is set [media] MAINTAINERS: add Michael Krufky as tda827x maintainer [media] MAINTAINERS: add Michael Krufky as tda8290 maintainer [media] MAINTAINERS: add Michael Krufky as cxusb maintainer [media] MAINTAINERS: add Michael Krufky as lg2160 maintainer [media] MAINTAINERS: add Michael Krufky as lgdt3305 maintainer [media] MAINTAINERS: add Michael Krufky as mxl111sf maintainer [media] MAINTAINERS: add Michael Krufky as mxl5007t maintainer [media] MAINTAINERS: add Michael Krufky as tda18271 maintainer [media] s5p-tv: Report only multi-plane capabilities in vidioc_querycap [media] s5p-mfc: Fix misplaced return statement in s5p_mfc_suspend() [media] exynos-gsc: Add missing static storage class specifiers [media] exynos-gsc: Remove <linux/version.h> header file inclusion [media] s5p-fimc: Fix incorrect condition in fimc_lite_reqbufs() [media] s5p-tv: Fix potential NULL pointer dereference error [media] s5k6aa: Fix possible NULL pointer dereference ...
2012-10-06[media] dvb-usb: print small buffers via %*phAndy Shevchenko
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-06[media] uvc: Add return code check at vb2_queue_init()Ezequiel Garcia
This function returns an integer and it's mandatory to check the return code. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-06[media] em28xx: Replace memcpy with struct assignmentEzequiel Garcia
This kind of memcpy() is error-prone and its replacement with a struct assignment is prefered. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-05[media] technisat-usb2: add a MODULE_DEVICE_TABLE for udev autoloadPatrick Boettcher
This patch adds a module-device-table-entry to the technisat-usb2-driver which will help udev to on-demand load the driver. This was obviously forgotten during initial commit. Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-02em28xx: regression fix: use DRX-K sync firmware requests on em28xxMauro Carvalho Chehab
As em28xx-dvb will always be initialized asynchronously, there's no need anymore for a separate thread to load the DRX-K firmware. Fixes a known regression with kernel 3.6 with tda18271 driver and asynchronous DRX-K firmware load. Antti tested it with the following hardware: Hauppauge WinTV HVR 930C MaxMedia UB425-TC PCTV QuatroStick nano (520e) Tested-by: Antti Palosaari <crope@iki.fi> Cc: stable@kernel.org # for Kernel 3.6 - please note that driver location has changed Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-02em28xx: Make all em28xx extensions to be initialized asynchronouslyMauro Carvalho Chehab
em28xx-dvb, em28xx-alsa and em28xx-ir are typically initialized asyncrhronously. The exception for it is when those modules are loaded before em28xx (or before an em28xx card insertion) or when they're built in. Make the extentions to always load asynchronously. That allows having all DVB firmwares loaded synchronously with udev-182. Antti tested it with the following hardware: Hauppauge WinTV HVR 930C MaxMedia UB425-TC PCTV QuatroStick nano (520e) Tested-by: Antti Palosaari <crope@iki.fi> Cc: stable@kernel.org # for Kernel 3.6 - please note that driver location has changed Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] rtl28xxu: [0ccd:00d3] TerraTec Cinergy T Stick RC (Rev. 3)Antti Palosaari
It is RTL2832U + E4000. Thanks to Nikolai Spasov reporting and testing! Reported-by: Nikolai Spasov <ns@codingrobot.com> Tested-by: Nikolai Spasov <ns@codingrobot.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] em28xx: do not set PCTV 290e LNA handler if fe attach failAntti Palosaari
It was a bug that could cause oops if demodulator attach was failed. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] cxd2820r: use static GPIO config when GPIOLIB is undefinedAntti Palosaari
It is fallback condition as GPIOLIB seems to be disabled by default. Better solution is needed, maybe GPIOLIB could be enabled by default? Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-01[media] em28xx: implement FE set_lna() callbackAntti Palosaari
Make LNA run-time switching possible for PCTV nanoStick T2 290e! Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] anysee: do not remove CI when it is not attachedAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] dvb_usb_v2: fix error handling for .tuner_attach()Antti Palosaari
fe was not set NULL after it was destroyed in tuner attach fail error case. Due to that it was destroyed again and Kernel oopsed. Reported-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] cypress_firmware: refactor firmware downloadingAntti Palosaari
Refactor firmware download function. It also should fix one bug coming from usb_control_msg() message buffers. Taking buffers from the stack for usb_control_msg() is not allowed as it does not work on all architectures. Allocate buffers using kmalloc(). Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] cypress_firmware: use Kernel dev_foo() loggingAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] rtl28xxu: [0413:6680] DigitalNow Quad DVB-T ReceiverAntti Palosaari
It is 4 x RTL2832U + 4 x FC0012 in one PCIe board. Of course there is a PCIe USB host controller too. Big thanks for Darryl Bond reporting and testing that! Reported-by: Darryl Bond <darryl.bond@gmail.com> Tested-by: Darryl Bond <darryl.bond@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] Support for Asus MyCinema U3100Mini PlusOliver Schinagl
This is initial support for the Asus MyCinema U3100Mini Plus. The driver in its current form gets detected and loads properly. Scanning using dvbscan works without problems, Locking onto a channel using tzap also works fine. Only playback using tzap -r + mplayer was tested and was fully functional. It uses the af9035 USB Bridge chip, with an af9033 demodulator. The tuner used is the FCI FC2580. Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] rtl28xxu: use proper config for e4000 tunerAntti Palosaari
Do not abuse anymore fc0012 tuner config. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] rtl28xxu: remove fc0013 tuner fe callbackAntti Palosaari
It is just stub implementation, remove it. Also add debug for beginning of fe callback. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] rtl28xxu: move rtl2831u tuner probing to .read_config()Antti Palosaari
Move rtl2831u tuner probing correct place. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] rtl28xxu: do not return error for unimplemented fe callbackAntti Palosaari
Use of frontend callback is highly hardware design dependent and whole callback could be optional in many cases. Returning error by default when callback is not implemented is stupid. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] rtl28xxu: masked reg writeAntti Palosaari
Implement masked register write and use it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] rtl28xxu: move rtl2832u tuner probing to .read_config()Antti Palosaari
Move rtl2832u tuner probing correct place. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] af9035: declare MODULE_FIRMWAREAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] dvb_usb_v2: call streaming_ctrl() before kill urbsAntti Palosaari
Logically it is better ask hardware to stop streaming before killing urbs carrying stream. Earlier it was just opposite. Now code runs: * submit urbs * start streaming ** streaming ongoing ** * stop streaming * kill urbs Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] dvb_usb_v2: rename module dvb_usbv2 => dvb_usb_v2Antti Palosaari
I think it is better name. At that phase renaming is quite painless as module is not yet merged to mainline Kernel. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] cxd2820r: use Kernel GPIO for GPIO accessAntti Palosaari
Currently there is LNA behind cxd2820r demodulator GPIO. Use Kernel GPIO interface to access those GPIOs. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] rtl28xxu: add ID [0bda:2832] Realtek RTL2832U reference designAntti Palosaari
Also change location of other RTL2832 reference design ID 0bda:2838. I just like to see reference design IDs at the first IDs in the list. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-27[media] af9035: implement TUA9001 GPIOs correctlyAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] Set vfl_dir for all display or m2m driversHans Verkuil
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_crop constHans Verkuil
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_crop. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_audio constHans Verkuil
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_audio. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_jpegcomp constHans Verkuil
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_jpegcomp. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: remove experimental tag from a number of old driversHans Verkuil
A number of old drivers still had the experimental tag. Time to remove it. It concerns the following drivers: VIDEO_TLV320AIC23B USB_STKWEBCAM VIDEO_CX18 VIDEO_CX18_ALSA VIDEO_ZORAN_AVS6EYES DVB_USB_AF9005 MEDIA_TUNER_TEA5761 VIDEO_NOON010PC30 This decision was taken during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-25[media] stk1160: Stop device and unqueue buffers when start_streaming() failsEzequiel Garcia
If start_streaming() fails (e.g. out of memory) the driver needs to rewind the start procedure. This implies possibly stopping the device and clearing the buffer queue. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-25[media] stk1160: Fix s_fmt and try_fmt implementationEzequiel Garcia
The driver was expecting to get a valid pixelformat on s_fmt and try_fmt. This is wrong, since the user may pass a bitmask and expect the driver to change it, returning a valid (fourcc) pixelformat. This problem was spotted by v4l2-compliance. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-25[media] stk1160: Handle urb allocation failure condition properlyEzequiel Garcia
When an urb buffer can't be allocated, the currently allocated buffer count must be saved so they can properly released. Moreover, it's sufficient to call stk1160_free_isoc to have all urb buffers released. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-25[media] stk1160: Make kill/free urb debug message more verboseEzequiel Garcia
This is just a cleaning patch to produce more useful debug messages. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-23[media] ce6230: use Kernel dev_foo() loggingAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-23[media] ec168: use Kernel dev_foo() loggingAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-23[media] gl861: use Kernel dev_foo() loggingAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-23[media] au6610: use Kernel dev_foo() loggingAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-23[media] af9035: use Kernel dev_foo() loggingAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-23[media] af9015: correct few error codesAntti Palosaari
Plain '-1' is not very good error code. Use more suitable error code definitions. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>