summaryrefslogtreecommitdiffstats
path: root/drivers/media/video/cx23885
AgeCommit message (Collapse)Author
2008-04-24V4L/DVB (7399): Removes video_dev from tuner-xc2028 config structMauro Carvalho Chehab
The video_dev parameter, on tuner-xc2028 were used to pass i2c private data to tuner_callback. Since the driver already have a pointer to i2c_adap->algo_data, uses this instead. This parameter were used also as a magic number to idenfity if two drivers are trying to register the same xc3028 tuner. This occurs with boards with DVB support, where both DVB and V4L drivers will share the same tuner. Instead of using the algo_data as a private number, after this patch, the driver will use i2c_adap->dev, with seems more consistent. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7385): tda18271: store agc_mode configuration independently of std_bitsMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7374): Fix left-overs from the videobuf-dma-sg.c conversion to ↵Guennadi Liakhovetski
generic DMA The dev element of the struct videobuf_queue is now of type struct device implicitly. Fix left-over casts. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7237): Convert videobuf-dma-sg to generic DMA APIGuennadi Liakhovetski
videobuf-dma-sg does not need to depend on PCI. Switch it to using generic DMA API, convert all affected drivers, relax Kconfig restriction, improve compile-time type checking, fix some Coding Style violations while at it. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7094): static memoryDouglas Schilling Landgraf
- Static memory is always initialized with 0. - Replaced in some cases C99 comments for /* */ Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-01V4L/DVB (7466): Avoid minor model number warning when an OEM HVR1250 board ↵Steven Toth
is detected Avoid minor model number warning when an OEM HVR1250 board is detected. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-01V4L/DVB (7465): Fix eeprom parsing and errors on the HVR1800 productsSteven Toth
On some models, the valid Hauppauge eeprom data begins at a different offset. This patch avoid unfriendly 'corrupt' eeprom errors during driver load. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-01V4L/DVB (7464): Convert driver to use a single SRAM memory mapSteven Toth
This reduces the memory footprint and removes the need to manually configure each map, which lead to a bug where the Fusion EXP 5 board broke for a while. This also fixes digital support again for the DViCO FusionHDTV5Express. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7045): xc5000: Small amount of cleanup and commentingSteven Toth
xc5000: Small amount of cleanup and commenting, just for clarification. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7044): XC5000: Fix support for HVR1500Q broken by patch 1Steven Toth
From Zhang: This patch fixes support for the HVR1500Q which was broken when the xc5000 analog patch was added. Patch committed as-is, cleanups to follows .... Steve Signed-off-by: Chaogui Zhang <czhang1974@gmail.com> Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7041): s5h1409: Bug fix for parallel supportSteven Toth
Parallel support was not working with the s5h1409 and the Pinnacle HD800i. This patch fixes the demodulator driver and ensures that all existing s5h1409 based products configure the demodulator correctly. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7014): cx23885: dprintk macro cleanupSteven Toth
Added missing do { } while (0) Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7011): cx23885: Cleanup of compiler defines and warningsSteven Toth
Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7010): cx23885: Small cleanupSteven Toth
cx23885: Small cleanup Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7009): cx23885: Video and VBI related filesSteven Toth
cx23885: Video and VBI related files. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7007): cx23885: Add basic video support for the HVR1800Steven Toth
This enabled basic preview NTSC and PAL support for the HVR1800. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7006): cx23885: Track the board clock frequency and allow overridesSteven Toth
The cx23885/6/8 all have different clock rates, this patch allows the core to compensate, and developers to allow vendor specific overrides. This patches will be used by future analog video and encoder patches. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7005): cx23885: SRAM reallocation prior to analog video implementationSteven Toth
We need to clear space large enough for the video and encoder fifos. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7004): cx23885: Ensure HVR1800 TDA8295A is reset fully on module loadSteven Toth
Failure to do this means that a full system reboot is required if the part hangs. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7003): cx23885: Add support for device revision detectionSteven Toth
Each version of the cx23885/7/8 silicon has different build revs. We'll use this internal revision to work around bugs and known issues in the video and encoder related patches. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6963): tda18271: store IF frequency in a u16 instead of u32Michael Krufky
Store IF Frequency in a u16 instead of a u32. Multiply by 1000 before use. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6962): tda18271: allow device-specific configuration of IF ↵Michael Krufky
frequency and std bits Allow drivers to pass device-specific configuration parameters during attach. If these parameters are omitted, default values will be used. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6936): cx23885: update model matrix for Hauppauge HVR1500Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6935): cx23885: add missing subsystem IDs for Hauppauge HVR1500 RetailMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6934): cx23885: update model matrix for Hauppauge HVR1250Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6933): cx23885: update model matrix for Hauppauge HVR1800Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6932): cx23885: add missing subsystem ID for Hauppauge HVR1800 RetailMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6919): Kconfig: VIDEO_CX23885 must select DVB_TUNER_XC5000 if ↵Michael Krufky
!DVB_FE_CUSTOMIZE Everybody forgets to add the Kconfig stuff after they add new card support :-/ Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6909): cx23885: fix bad use count caused by tda18271 being probed ↵Michael Krufky
by tda8290 Don't allow the tda8290 module to probe and attach the tuner module, causing incorrect use counts when using dvb_attach. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6901): Kconfig: VIDEO_CX23885 selects TUNER_TDA8290 and DVB_TDA18271Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6900): cx23885: enable EZ-QAM mode for Hauppauge WinTV HVR-1800Michael Krufky
Add module option 'alt_tuner' disabled by default. When set to one, the dvb_frontend of HVR1800 will consist of: s5h1409 demod + tda18271 tuner When set zero (default), the dvb_frontend of HVR1800 will consist of: s5h1409 demod + mt2131 tuner If the tda18271 is used in digital mode, you will not be able to tune an analog channel at the same time. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6899): Kconfig: VIDEO_CX23885 must select TUNER_XC2028 if ↵Michael Krufky
!DVB_FE_CUSTOMIZE Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6898): cx23885: add support for Hauppauge WinTV HVR-1500Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6887): Avoid 'unknown model' message for the HVR1500-QSteven Toth
Avoid 'unknown model' message for the HVR1500-Q Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6886): xc5000: Cleanups of types, result codes etcSteven Toth
This translates much of the xceive coding style, adds some result codes and generally cleans up whitespace and function arguments. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6885): Add support for the Hauppauge HVR1500QSteven Toth
The express card ATSC/QAM tuner. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6857): cx23885: correctly join I2C writes and reads from same addressChris Pascoe
When an I2C message specifies a write then a read from the same I2C address, we need to tell the chip to not release the bus between the message parts. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6821): s5h1409: fix IF frequency configurationMichael Krufky
On the s5h1409 demod, the IF frequency for VSB is limited to 44 / 5.38 MHz. Hardcode VSB IF frequency within the driver to 44 / 5.38 MHz. QAM IF frequency remains configurable via attach-time configuration. Acked-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6600): V4L: videobuf: don't chew up namespace STATE_.*, convert to ↵Brandon Philips
VIDEOBUF_ s/STATE_NEEDS_INIT/VIDEOBUF_NEEDS_INIT/g s/STATE_PREPARED/VIDEOBUF_PREPARED/g s/STATE_QUEUED/VIDEOBUF_QUEUED/g s/STATE_ACTIVE/VIDEOBUF_ACTIVE/g s/STATE_DONE/VIDEOBUF_DONE/g s/STATE_ERROR/VIDEOBUF_ERROR/g s/STATE_IDLE/VIDEOBUF_IDLE/g Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6575): cx23885/: cleanupsAdrian Bunk
This patch contains the following cleanups: - make the following needlessly global code static: - cx23885-core.c: struct cx23885_sram_channels[] - cx23885-core.c: struct cx23887_sram_channels[] - cx23885-core.c: cx23885_wakeup() - cx23885-core.c: cx23885_sram_channel_setup() - cx23885-core.c: cx23885_sram_channel_dump() - cx23885-core.c: cx23885_risc_disasm() - cx23885-core.c: cx23885_shutdown() - cx23885-core.c: cx23885_reset() - cx23885-core.c: cx23885_dev_unregister() - cx23885-core.c: cx23885_risc_databuffer() - cx23885-core.c: cx23885_risc_stopper() - #if 0 the following unused functions: - cx23885-core.c: cx23885_risc_buffer() - cx23885-core.c: cx23885_cancel_buffers() - remove the following unused EXPORT_SYMBOL's: - cx23885-cards.c: cx23885_boards - cx23885-i2c.c: cx23885_call_i2c_clients Signed-off-by: Adrian Bunk <bunk@kernel.org> Reviewed-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6404): cx23885: i2c 16bit reg/val read/write fixSteven Toth
Fix i2c reads and writes of 16bit register address / values Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-24V4L/DVB (6871): Kconfig: VIDEO_CX23885 must select DVB_LGDT330XMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-04V4L/DVB (6479): use input functions, should depend on INPUTRandy Dunlap
All of these drivers select VIDEO_IR, which uses the input subsystem, so they should also depend on INPUT. Problem examples: drivers/built-in.o: In function `ir_input_key_event': ir-functions.c:(.text+0x10849a): undefined reference to `input_event' ir-functions.c:(.text+0x1084ac): undefined reference to `input_event' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11cc0a): undefined reference to `get_key_pinnacle_color' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11cc4f): undefined reference to `get_key_pinnacle_grey' drivers/built-in.o: In function `saa7134_input_fini': (.text+0x11cd8b): undefined reference to `input_unregister_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d1fa): undefined reference to `input_allocate_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d317): undefined reference to `input_register_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d6ca): undefined reference to `input_free_device' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c3f3): undefined reference to `ir_codes_hauppauge_new' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c450): undefined reference to `ir_codes_pinnacle_color' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c480): undefined reference to `ir_codes_purpletv' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c495): undefined reference to `ir_codes_pinnacle_grey' drivers/built-in.o: In function `saa7134_ir_start': (.text+0x11c622): undefined reference to `ir_rc5_timer_end' drivers/built-in.o: In function `saa7134_ir_start': (.text+0x11c637): undefined reference to `ir_rc5_timer_keyup' drivers/built-in.o: In function `build_key': saa7134-input.c:(.text+0x11c769): undefined reference to `ir_extract_bits' saa7134-input.c:(.text+0x11c7ad): undefined reference to `ir_input_keydown' saa7134-input.c:(.text+0x11c7f0): undefined reference to `ir_input_keydown' saa7134-input.c:(.text+0x11c7f9): undefined reference to `ir_input_nokey' saa7134-input.c:(.text+0x11c806): undefined reference to `ir_input_nokey' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ca07): undefined reference to `ir_codes_encore_enltv' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11caf6): undefined reference to `ir_input_init' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cbf2): undefined reference to `ir_codes_avermedia' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc24): undefined reference to `ir_codes_pctv_sedna' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc53): undefined reference to `ir_codes_flydvb' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc85): undefined reference to `ir_codes_videomate_tv_pvr' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ccb7): undefined reference to `ir_codes_pixelview' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cce9): undefined reference to `ir_codes_eztv' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cd1b): undefined reference to `ir_codes_manli' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cda8): undefined reference to `ir_codes_cinergy' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cdd7): undefined reference to `ir_codes_flyvideo' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ce06): undefined reference to `ir_codes_asus_pc39' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ce7d): undefined reference to `ir_codes_gotview7135' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cee1): undefined reference to `ir_codes_proteus_2309' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6325): Double-free in cx23885_initdevFlorin Malita
Both cx23885_initdev and cx23885_dev_setup free the device in their error path so a failure in the latter causes a double-free. Since cx23885_dev_setup is only called from cx23885_initdev, it should be safe to remove its deallocation and leave the cleanup up to the allocating function. Coverity CID 1922. Signed-off-by: Florin Malita <fmalita@gmail.com> CC: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-13cx23885: Drop empty i2c algorithm control callbackJean Delvare
i2c_algorithm.algo_control is about to be removed. Signed-off-by: Jean Delvare <khali@linux-fr.org> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6316): Change list_for_each+list_entry to list_for_each_entryTrent Piepho
The rest of V4L files. There is one list_for_each+list_entry in cpia_pp.c that wasn't changed because it expects the loop iterator to remain NULL if the list is empty. A bug in vivi is fixed; the 'safe' version needs to be used because the loop deletes the list entries. Simplify a second loop in vivi and get rid if an un-used variable in that loop. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6297): cx23885: remove wrong Kconfig selection of VIDEOBUFMichael Krufky
fix bad Kconfig dependency of cx23885 module. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6287): Fix DMA Scatter/Gather constructorMauro Carvalho Chehab
cx23885 driver were converted to use the newer videobuf support. Unfortunately, the constructor weren't changed. This causes an oops, since the abstract methods (implemented as callbacks) aren't defined. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
2007-10-10V4L/DVB (6284): cx23885: Update to new videobuf codeTrent Piepho
cx23885 was still uses the old video-buf includes and code, which would only `work' if one happened to be compiling against a kernel that had the old headers. Even then, it wouldn't actually work, it would just compile without errors. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6283): videobuf: Remove references to old Kconfig option nameTrent Piepho
CONFIG_VIDEO_BUF_DVB became CONFIG_VIDEOBUF_DVB. But in these cases, it makes more sense to use CONFIG_VIDEO_SAA7134_DVB or CONFIG_VIDEO_CX88_DVB_MODULE depending on the driver. The reference in cx23885.h should just be removed, as the code there needs to be included if DVB is on or off. I do not think you can even compile the cx23885 driver without DVB. It's clearly just leftover from when the file was obvious copied from the cx88 driver (which is not mentioned in the copyright BTW). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-19 15:47:27 +0000