summaryrefslogtreecommitdiffstats
path: root/drivers/media/video/cx25840
AgeCommit message (Collapse)Author
2010-06-01V4L/DVB: cx24850: remove obsolete g/s_fmt opsHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01V4L/DVB: cx25840: add support for s_mbus_fmtHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: cx18/cx25840/saa7115/tvp5150: remove vbi support from s_fmtHans Verkuil
Now that s_fmt is no longer used for VBI format setup in subdevs, remove the VBI support from s_fmt. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: cx25840: support new vbi ops to set/get VBI formatHans Verkuil
Also removed the bogus zeroing of fmt.sliced when setting up raw VBI. Switching between raw and sliced VBI changed in 2.6.28 and this memset should have been removed at that time. It was never noticed because the bridge driver will fill in the fmt.vbi values anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: v4l: move vbi-specific video ops to a new vbi ops structHans Verkuil
Only a relatively small number of video receivers and transmitters actually support VBI. So start moving the vbi specific ops to an ops struct of their own. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: cx25840: Fix composite detectionKusanagi Kouichi
If CX25840_VIN1_CH1 and the like is used, input is not detected as composite. Their value is 0x800000XX and CX25840_COMPONENT_ON is 0x80000200. So 739 else if ((vid_input & CX25840_COMPONENT_ON) == 0) this condition never be true. Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp> Reviewed-by: Andy Walls <awalls@radix.net> Acked-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: cx25840, v4l2-subdev, ivtv, pvrusb2: Fix ivtv/cx25840 tinny audioAndy Walls
This change attempts to fix the ivtv tinny audio problem by keeping digitizer to encoder audio clocks running, while disabling the video clocks as needed to avoid unpredictable PCI bus hangs. To accomplish this, for the cx25840 module enabling of audio streaming had to be separated from enabling video streaming, requiring an additional v4l2_subdev_audio_op and calls to this new op in the pvrusb2 and ivtv drivers. The cx231xx and cx23885 driver use the cx25840 module for affecting only video on s_stream calls, so those drivers needed no change. The CX23418 hardware does not exhibit either the tinny audio problem nor the PCI bus hang, so the cx18 driver did not need corresponding changes. CX2341[56] based cards that are not using the CX2584x family of chips do not seem to be affected by the tinny audio problem, and this change should not affect how they are configured. It will delay their first capture by starting by another 300 msec though. Many thanks go to Argus <pthorn-ivtvd@styx2002.no-ip.org> and Martin Dauskardt <martin.dauskardt@gmx.de> whose persistent testing and investigation of this problem will hopefully fix this problem once and for all for many ivtv users. Reported-by: Martin Dauskardt <martin.dauskardt@gmx.de> Reported-by: Argus <pthorn-ivtvd@styx2002.no-ip.org> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13232): cx25840 6.5MHz carrier detection fixesAleksandr V. Piskunov
cx25840: Disable 6.5MHz carrier autodetection for PAL, always assume its DK. Only try to autodetect 6.5MHz carrier for SECAM if user accepts both system DK and L. Signed-off-by: Aleksandr V. Piskunov <alexandr.v.piskunov@gmail.com> Reviewed-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13206): cx25840: add component supportDavid T.L. Wong
Signed-off-by: David T.L. Wong <davidtlwong@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13092): cx25840: Improvements to the cx23885/7/8 chip detection ↵Steven Toth
mechanism. The prior mechanism wasn't reliable with the cx23887. This new mechanism tests correctly against cx23885, 7 and 8 based products. Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13090): cx25840: Init PLLs properly for CX2388[578] A/V coresAndy Walls
The SYS and AUX PLLs need to be initialized to different values based on the chip: CX23885, CX23887, CX23888, as each uses a different crystal frequency: 28.6363 MHz, 25.0 MHz, 50.0 MHz. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13089): cx25840: Separate set_audclk_freq functionality for the ↵Andy Walls
different chips Separate out the set_audclk_freq() function into separate functions for the four families of cores. These cores all use slightly different sample clock schemes and may be assuming slightly (+/- 3 Hz) different reference frequencies. The code resuse was not worth the maintenance and testing headache of have all chips use the same function peppered with conditional logic. Added comments on how PLL and SRC parameters values are computed. Fixed a few bugs related to the shared code having a large number of conditional statements. Noted inconsistencies with FIXME in the comments. This is done in preparation for getting the CX2388[578] PLL/clock setting logic cleaned up for CX23888 analog video and IR (which need the VID PLL set right). Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13088): cx25840: Convert chip/core family checks to static inline ↵Andy Walls
functions Change logic to check for various chip or core families to inline functions. Checks for specific chips should be made against the state->id field now. This is in preparation for chip/core specific code for setting up PLLs for the CX2388[578] family of cores, that all run with different crystal frequencies. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13087): cx25840: Improve detection of CX2388[578] A/V coresAndy Walls
Add improved logic to detect the exact CX2388[578] A/V core that is being probed. Also cleaned up detection and logging for CX2310[12], CX2583[67], and CX2584[0123] cores and chips. Also added code to identify a CX2388[578] A/V decoder core that is not responding properly. Typical symptoms include registers 0x00-0xff responding properly but all other registers returning the same value (0x13 and 0x5 have been observed). This state will cause proper detection of '885 vs. '887 vs. '888 to fail and the chip won't respond to get configured properly anyway. I have no method of reseting the core to a working state at this time; but I didn't try too hard to work one out either. The problem likely only occurs in development. I suspect configuring the SYS PLL VCO to oscillate too slowly (286.3 MHz?) before post divide may be the root cause, when encountered. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12613): cx25840: fix determining the firmware nameHans Verkuil
Depending on the model there are three different firmwares to choose from. Unfortunately if a cx23885 is loaded first, then the global firmware name is overwritten with that firmware and if ivtv is loaded next, then it tries to load the wrong firmware. In addition, the original approach would also overwrite any firmware that the user specified explicitly. Cc: Jarod Wilson <jarod@wilsonet.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12347): cx25840: Bugfix for no DVB-T on the Hauppauge HVR-1700Steven Toth
After the i2c subdev changes the ordering of initialization changed, causing a total loss of previous GPIO settings and a loss of DTV. The generic firmware loading routine has now changed to preserve GPIO values if the device is cx23885 based (safety) and I've moved the GPIO configuration from probe() into the cx23885 init func which is a little clearer and fixes the bug. Tested-by: Sohail Syyed <linuxtv@hubstar.net> Reviewed-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11380): v4l2-subdev: change s_routing prototypeHans Verkuil
It is no longer needed to use a struct pointer as argument, since v4l2_subdev doesn't require that ioctl-like approach anymore. Instead just pass the input, output and config (new!) arguments directly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11370): v4l2-subdev: move s_std from tuner to core.Hans Verkuil
s_std didn't belong in the tuner ops. Stricly speaking it should be part of the video ops, but it is used by audio and tuner devices as well, so it is more efficient to make it part of the core ops. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11369): v4l2-subdev: add load_fw and use that instead of abusing ↵Hans Verkuil
core->init. The init callback was used in several places to load firmware. Make a separate load_fw callback for that. This makes the code a lot more understandable. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (10989): cx25840: cx23885 detection was brokenHans Verkuil
An earlier commit accidentally broke the detection of the cx25837 part of the cx23885. Reinstated the commented out code. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (10953): cx25840: Fix CodingStyle errors introduced by the last patchMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (10952): cx25840: prepare it to be used by cx231xx moduleSri Deevi
cx231xx has a cx25840 inside the chip. However, some different initializations are used for this variant. Signed-off-by: Srinivasa Deevi <srinivasa.deevi@conexant.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11315): cx25840: fix 'unused variable' warning.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11309): cx25840: cleanup: remove intermediate 'ioctl' stepHans Verkuil
The audio and vbi functions where still called through an ioctl-like interface, even though this is no longer needed with v4l2-subdev. Just change each 'case' into a proper function and call that directly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11298): cx25840: remove legacy code for old-style i2c APIHans Verkuil
All drivers that use cx25840 are now converted to v4l2_subdev, so I can remove the support for the old-style i2c API. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10698): v4l2-common: remove v4l2_ctrl_query_fill_stdHans Verkuil
The v4l2_ctrl_query_fill_std() function wasn't one the best idea I ever had. It doesn't add anything valuable that cannot be expressed equally well with v4l2_ctrl_query_fill and only adds overhead. Replace it with v4l2_ctrl_query_fill() everywhere it is used and remove it from v4l2_common.c. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10408): v4l2: fix incorrect hue range checkHans Verkuil
A hue of -128 was rejected due to an incorrect range check, which was faithfully copy-and-pasted into four drivers... Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10251): cx25840: add comments explaining what the init() does.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29V4L/DVB (10314): cx25840: ignore TUNER_SET_CONFIG in the command callback.Hans Verkuil
These days TUNER_SET_CONFIG is broadcast to the other i2c devices and that triggers a fw load on the cx25840. Ignore this command since cx25840 isn't a tuner and you really do not want to load the firmware that early. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29V4L/DVB (10250): cx25840: fix regression: fw not loaded on first useHans Verkuil
With the conversion to v4l2_subdev one bit of code was accidentally dropped: on receiving the first command the driver has to load the fw. A new init() command was introduced to do that explicitly for bridge drivers that are converted to use v4l2_subdev, but old drivers that are not yet converted no longer worked. This patch fixes this regression for these old drivers. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02V4L/DVB (10141): v4l2: debugging API changed to match against driver name ↵Hans Verkuil
instead of ID. Since the i2c driver ID will be removed in the near future we have to modify the v4l2 debugging API to use the driver name instead of driver ID. Note that this API is not used in applications other than v4l2-dbg.cpp as it is for debugging and testing only. Should anyone use the old VIDIOC_G_CHIP_IDENT, then this will be logged with a warning that it is deprecated and will be removed in 2.6.30. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9823): cx25840: convert to v4l2_subdev.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9507): v4l: remove EXPERIMENTAL from several driversHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-13V4L/DVB (9162): ivtv: fix raw/sliced VBI mixupHans Verkuil
The service_set field was used in saa7115 and cx25840 to determine whether raw or sliced VBI was desired. This is incorrect since it is perfectly valid to select sliced VBI with a service_set of 0. Instead these drivers should checked on VIDIOC_S_FMT whether the type field matches the raw or sliced VBI type. Updated ivtv accordingly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8805): Steven Toth email address changeSteven Toth
I need this so I can better isolate my linux email from my corporate email. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-07-27V4L/DVB (8534): remove select's of FW_LOADERAdrian Bunk
After commit d9b19199e4894089456aaad295023263b5225c1a (always enable FW_LOADER unless EMBEDDED=y) we can remove the FW_LOADER select's and corresponding dependencies on HOTPLUG. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-26V4L/DVB (8494): make cx25840_debug staticAdrian Bunk
cx25840_debug can now become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8377): ivtv/cx18: ensure the default control values are correctHans Verkuil
For several MPEG controls and the volume control the default as returned by VIDIOC_QUERYCTRL was incorrect and did not match the actual initial value. This is now fixed for cx18 and ivtv. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8376): cx25840: move cx25840_vbi_setup to core.c and rename to ↵Hans Verkuil
cx25840_std_setup cx25840_vbi_setup has nothing to do with setting up VBI, but everything with setting up the standard. Move to cx25840-core.c and rename. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20v4l-dvb: remove legacy checks to allow support for kernels < 2.6.10Hans Verkuil
Also remove some blank lines that were used to split compat code at -devel tree. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-10cx25840: treat firmware data as constDavid Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Tyler Trafford <ttrafford@gmail.com> Acked-by: Mike Isely <isely@pobox.com>
2008-06-26V4L/DVB (8007): cx18/cx25840: the S-Video LUMA input can use all In1-In8 inputsHans Verkuil
The S-Video LUMA input was restricted to the In1-In4 inputs, but it turns out that it can use the full range of In1-In8. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-18i2c: Convert remaining new-style drivers to use module aliasingJean Delvare
Update all the remaining new-style i2c drivers to use standard module aliasing instead of the old driver_name/type driver matching scheme. Note that the tuner driver is a bit quirky at the moment, as it overwrites i2c_client.name with arbitrary strings. We write "tuner" back on remove, to make sure that driver cycling will work properly, but there may still be troublesome corner cases. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-05-14V4L/DVB (7851): Fix FW_LOADER depencency at v4l/dvbMauro Carvalho Chehab
Since: 1) FW_LOADER is defined as: config FW_LOADER tristate "Userspace firmware loading support" depends on HOTPLUG 2) several V4L/DVB driver just selects it; 3) select is not smart enough to auto-select HOTPLUG, if select FW_LOADER. So, All drivers that select FW_LOADER should also depend on HOTPLUG. An easier solution (for the end-user perspective) would be to "select HOTPLUG". However, live is not simple. This would cause recursive dependency issues like this one: drivers/usb/Kconfig:62:error: found recursive dependency: USB -> USB_OHCI_HCD -> I2C -> MEDIA_TUNER -> MEDIA_TUNER_XC2028 -> HOTPLUG -> PCCARD -> PCMCIA -> USB_ARCH_HAS_HCD -> MOUSE_APPLETOUCH -> USB Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-29i2c: Add support for device alias namesJean Delvare
Based on earlier work by Jon Smirl and Jochen Friedrich. This patch allows new-style i2c chip drivers to have alias names using the official kernel aliasing system and MODULE_DEVICE_TABLE(). At this point, the old i2c driver binding scheme (driver_name/type) is still supported. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jochen Friedrich <jochen@scram.de> Cc: Jon Smirl <jonsmirl@gmail.com> Cc: Kay Sievers <kay.sievers@vrfy.org>
2008-04-24V4L/DVB (7646): cx25840: Ensure GPIO2 is correctly set for cx23885/7/8 based ↵Steven Toth
products cx25840: Ensure GPIO2 is correctly set for cx23885/7/8 based products. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7344): cx25840: better PAL-M and NTSC-KR handlingHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24V4L/DVB (7241): cx25840: code cleanupTyler Trafford
- Use min() - Eliminate extraneous variables Signed-off-by: Tyler Trafford <ttrafford@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7002): cx25840: Add basic CX23885 AVCore supportSteven Toth
The cx23885/7/8 PCIe bridge has an internal AVCore modelled on the cx2584x family. Many of the registers positions are identical but some moved. The register values are also different because the different bridges run at different clock rates. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6743): cx25840: fix endianness inconsistencyHans Verkuil
cx25840_read4 reads a little-endian 32-bit value whereas cx25840_write4 writes the 32-bit value as big-endian. Convert write4 to use little-endian as well (that's the correct endianness). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>