summaryrefslogtreecommitdiffstats
path: root/drivers/media/video/cx88
AgeCommit message (Collapse)Author
2009-12-09Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (345 commits) V4L/DVB (13542): ir-keytable: Allow dynamic table change V4L/DVB (13541): atbm8830: replace 64-bit division and floating point usage V4L/DVB (13540): ir-common: Cleanup get key evdev code V4L/DVB (13539): ir-common: add __func__ for debug messages V4L/DVB (13538): ir-common: Use a dynamic keycode table V4L/DVB (13537): ir: Prepare the code for dynamic keycode table allocation V4L/DVB (13536): em28xx: Use the full RC5 code on HVR-950 Remote Controller V4L/DVB (13535): ir-common: Add a hauppauge new table with the complete RC5 code V4L/DVB (13534): ir-common: Remove some unused fields/structs V4L/DVB (13533): ir: use dynamic tables, instead of static ones V4L/DVB (13532): ir-common: Add infrastructure to use a dynamic keycode table V4L/DVB (13531): ir-common: rename the debug routine to allow exporting it V4L/DVB (13458): go7007: subdev conversion V4L/DVB (13457): s2250: subdev conversion V4L/DVB (13456): s2250: Change module structure V4L/DVB (13528): em28xx: add support for em2800 VC211A card em28xx: don't reduce scale to half size for em2800 em28xx: don't load audio modules when AC97 is mis-detected em28xx: em2800 chips support max width of 640 V4L/DVB (13523): dvb-bt8xx: fix compile warning ... Fix up trivial conflicts due to spelling fixes from the trivial tree in Documentation/video4linux/gspca.txt drivers/media/video/cx18/cx18-mailbox.h
2009-12-05V4L/DVB (13537): ir: Prepare the code for dynamic keycode table allocationMauro Carvalho Chehab
Currently, the IR table is initialized by calling ir_input_init(). However, this function doesn't return any error code, nor has a function to be called when de-initializing the IR's. Change the return argment to integer and make sure that each driver will handle the error code. Also adds a function to free any resources that may be allocating there: ir_input_free(). Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13533): ir: use dynamic tables, instead of static onesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13407): Add Prof 7301 PCI DVB-S2 cardIgor M. Liplianin
Add Prof 7301 PCI DVB-S2 card The card based on stv0903 demod, stb6100 tuner. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13238): v4l2_subdev: rename tuner s_standby operation to core s_powerLaurent Pinchart
Upcoming I2C v4l2_subdev drivers need a way to control the subdevice power state from the core. This use case is already partially covered by the tuner s_standby operation, but no way to explicitly come back from the standby state is available. Rename the tuner s_standby operation to core s_power, and fix tuner drivers accordingly. The tuner core will call s_power(0) instead of s_standby(). No explicit call to s_power(1) is required for tuners as they are supposed to wake up from standby automatically. [mchehab@redhat.com: CodingStyle fix] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13135): Add support for TeVii remotesIgor M. Liplianin
The patch brings infrared remote support for some cx88 based cards. Such as TeVii S460,S420. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13134): Add support for TBS-likes remotesIgor M. Liplianin
The patch brings infrared remote support for some cx88 based cards. Such as: TeVii S460,S420; Omicom SS4; SatTrade ST4200; TBS 8920,8910; Prof 7300,6200. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13103): create a standard method for dvb adapter drivers to ↵Michael Krufky
override frontend ioctls Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-04tree-wide: fix assorted typos all over the placeAndré Goddard Rosa
That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) trivial: fix typo in aic7xxx comment trivial: fix comment typo in drivers/ata/pata_hpt37x.c trivial: typo in kernel-parameters.txt trivial: fix typo in tracing documentation trivial: add __init/__exit macros in drivers/gpio/bt8xxgpio.c trivial: add __init macro/ fix of __exit macro location in ipmi_poweroff.c trivial: remove unnecessary semicolons trivial: Fix duplicated word "options" in comment trivial: kbuild: remove extraneous blank line after declaration of usage() trivial: improve help text for mm debug config options trivial: doc: hpfall: accept disk device to unload as argument trivial: doc: hpfall: reduce risk that hpfall can do harm trivial: SubmittingPatches: Fix reference to renumbered step trivial: fix typos "man[ae]g?ment" -> "management" trivial: media/video/cx88: add __init/__exit macros to cx88 drivers trivial: fix typo in CONFIG_DEBUG_FS in gcov doc trivial: fix missing printk space in amd_k7_smp_check trivial: fix typo s/ketymap/keymap/ in comment trivial: fix typo "to to" in multiple files trivial: fix typos in comments s/DGBU/DBGU/ ...
2009-09-21trivial: media/video/cx88: add __init/__exit macros to cx88 driversPeter Huewe
Trivial patch which adds the __init and __exit macros to the module_init / module_exit functions to several files in drivers/media/video/cx88/ Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-19V4L/DVB (12540): v4l: simplify v4l2_i2c_new_subdev and friendsHans Verkuil
Rewrite v4l2_i2c_new_subdev as a simplified version of v4l2_i2c_new_subdev_cfg and remove v4l2_i2c_new_probed_subdev and v4l2_i2c_new_probed_subdev_addr. This simplifies this API substantially. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12595): common/ir: use a struct for keycode tablesMauro Carvalho Chehab
Currently, V4L uses a scancode table whose index is the scancode and the value is the keycode. While this works, it has some drawbacks: 1) It requires that the scancode to be at the range 00-7f; 2) keycodes should be masked on 7 bits in order for it to work; 3) due to the 7 bits approach, sometimes it is not possible to replace the default keyboard to another one with a different encoding rule; 4) it is different than what is done with dvb-usb approach; 5) it requires a typedef for it to work. This is not a recommended Linux CodingStyle. This patch is part of a larger series of IR changes. It basically replaces the IR_KEYTAB_TYPE tables by a structured table: struct ir_scancode { u16 scancode; u32 keycode; }; This is very close to what dvb does. So, a further integration with DVB code will be easy. While we've changed the tables, for now, the IR keycode handling is still based on the old approach. The only notable effect is the redution of about 35% of the ir-common module size: text data bss dec hex filename 6721 29208 4 35933 8c5d old/ir-common.ko 5756 18040 4 23800 5cf8 new/ir-common.ko In thesis, we could be using above u8 for scancode, reducing even more the size of the module, but defining it as u16 is more convenient, since, on dvb, each scancode has up to 16 bits, and we currently have a few troubles with rc5, as their scancodes are defined with more than 8 bits. This patch itself shouldn't be doing any functional changes. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12469): fix bad whitespaces at cx88_geniatech_x8000_mtMauro Carvalho Chehab
It were using 7 spaces instead of tab for indent. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12486): cx88: fix TBS 8920 card supportIgor M. Liplianin
It does matter to set explicitly gpio0 value in cx88_board structure for TBS 8920 card. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12465): cx88: High resolution timer for Remote ControlsAndrzej Hajda
Patch solves problem of missed keystrokes on some remote controls, as reported on http://bugzilla.kernel.org/show_bug.cgi?id=9637 . Signed-off-by: Andrzej Hajda <andrzej.hajda@wp.pl> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12V4L/DVB (12439): cx88: add support for WinFast DTV2000H rev. JVlastimil Labsky
I updated and simplyfied patch from Zbynek Hrabovsky for recent kernel. It enables autodetection of card, sound in analog TV , sound in FM radio and switching between antenna and cable RF input. Radio tuner still doesn't work, I don't even know how it works. Some guys wrote me that FM radio works with TV tuner used instead of radio part (symlink video0 -> radio0). Cc: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: Vlastimil Labsky <vlasta.labsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12394): cx88: Disable xc3028 power management for Geniatech x8000Devin Heitmueller
A user discovered that the Geniatech x8000 encountered a regression when the xc3028 power management was introduced. The xc3028 never recovers after setting the powerdown register, which is probably because the xc3028 reset GPIO is not properly configured. Since I do not have access to the hardware and thus cannot determine the correct GPIO configuration, just disable xc3028 power management on this board, which fixes the regression. Thanks to user "ritec" for reporting the issue and testing the fix. Cc: rictec <rictec@netcabo.pt> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12393): cx88: fix regression in tuning for Geniatech X8000 MTDevin Heitmueller
The introduction of the zl10353 i2c gate control broke support for the Geniatech board (which is not behind an i2 gate). Add the needed parameter. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12349): cx88: HVR1300 ensure switching from Encoder to DVB-T and ↵Sohail Syyed
back is reliable Current tip is broken and does not switch back to DVB-T correctly Signed-off-by: Sohail Syyed <linuxtv@hubstar.net> Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-12headers: smp_lock.h reduxAlexey Dobriyan
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-23V4L/DVB (11907): cx88: Use v4l bounding/alignment functionTrent Piepho
The v4l function has a better algorithm for aligning image size. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23V4L/DVB (12010): cx88: Properly support Leadtek TV2000 XP GlobalMauro Carvalho Chehab
Fix Leadtek TV2000 XP Global entries and add missing PCI ID's. Thanks to Terry Wu <terrywu2009@gmail.com> for pointing us for the proper settings. Cc: Terry Wu <terrywu2009@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (12004): poll method lose race conditionFigo.zhang
bttv-driver.c,cx23885-video.c,cx88-video.c: poll method lose race condition for capture video. Signed-off-by: Figo.zhang <figo1802@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11441): cx88-dsp: fixing 64bit mathMiroslav Sustek
cx88-dsp: fixing 64bit math on 32bit kernels Some gcc versions report the missing of __divdi3 [mchehab.redhat.com: CodingStyle fixes] Signed-off-by: Miroslav Sustek <sustmidown@centrum.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11396): cx88: avoid reprogramming every audio register on A2 ↵Marton Balint
stereo/mono change This patch changes cx88_set_stereo to avoid resetting all of the audio registers on stereo/mono change if the audio standard is A2, and set only the AUD_CTL register. The benefit of this method is that it eliminates the annoying clicking noise on setting the audio mode to stereo or mono. The driver had used the same method 1.5 years ago (and for FM radio it still does), but a pretty big cleanup commit changed it to the "complete audio reset" method, although the reason for this move was not clear. (If somebody knows why it was necessary, please let me know!) The original commit: http://linuxtv.org/hg/v4l-dvb/rev/ffe313541d7d Signed-off-by: Marton Balint <cus@fazekas.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11395): cx88: audio thread: if stereo detection is hw supported ↵Marton Balint
don't do it manually The sole purpose of the audio thread is to detect if stereo transmission is available, and if it is, then switch to stereo mode (and switch back, if it's no longer available). This manual autodetection is useful for some audio standards (e.g. A2) where cx88_get_stereo CAN detect stereo sound, but the cx2388x chip CANNOT auto-detect stereo sound. However, for other audio standards, the cx2388x chip CAN auto-detect the stereo sound, so the manual autodetection in the audio thread is not needed. In fact, it can cause serious problems because for some of these audio standards, cx88_get_stereo CANNOT detect the presence of stereo sound. Besides that, if the hardware automatically detects stereo/mono sound, you cannot set core->audiomode_current to the real current audio mode on channel change. With this patch, the manual autodetection is only used if audiomode_current is known after a channel change (because of the initial mono mode), and hardware-based stereo autodetecion is not applicable for the current audio standard. Signed-off-by: Marton Balint <cus@fazekas.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11394): cx88: Add support for stereo and sap detection for A2Marton Balint
The patch implements reliable stereo and sap detection for the A2 sound standard. This is achieved by processing the samples of the audio RDS fifo of the cx2388x chip. A2M, EIAJ and BTSC stereo/sap detection is also possible with this new approach, but it's not implemented yet. Stereo detection when alsa handles the sound also does not work yet. Signed-off-by: Marton Balint <cus@fazekas.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11784): cx88: Fix race condition between cx8800 startup and haldDevin Heitmueller
A power management fix to properly put the xc5000 into low power mode revealed a race condition where hald could detect the creation of the device file and connect to the device while the initial device configuration is still in progress. Lock the core structure so that video_release cannot be called and put the tuner to sleep in the middle of the initial call to cx88_set_tvnorm() in cx8800_initdev() Thanks to Michael Krufky for discovering the issue and providing an environment to test in. Cc: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11992): Add missing __devexit_p()Jean Delvare
Add missing __devexit_p() to several drivers. Also add a few missing __init, __devinit and __exit markers. These errors could result in build failures depending on the kernel configuration. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11879): Adds support for Leadtek WinFast DTV-1800HMiroslav Sustek
Enables analog/digital tv, radio and remote control (gpio). Tested-by: Marcin Wojcikowski <emtees.mts@gmail.com> Tested-by: Karel Juhanak <karel.juhanak@warnet.cz> Tested-by: Andrew Goff <goffa72@gmail.com> Tested-by: Jan Novak <novak-j@seznam.cz> Signed-off-by: Miroslav Sustek <sustmidown@centrum.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11853): minor have assigned value twicefigo.zhang
The variable minor have assigned value twice, the first time is in the initial "video_device" data struct in those drivers, pls see saa7134-video.c,line 2503. --- Signed-off-by: Figo.zhang <figo.zhang@kolorific.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11844): ir-kbd-i2c: Switch to the new-style device binding modelJean Delvare
Let card drivers probe for IR receiver devices and instantiate them if found. Ultimately it would be better if we could stop probing completely, but I suspect this won't be possible for all card types. There's certainly room for cleanups. For example, some drivers are sharing I2C adapter IDs, so they also had to share the list of I2C addresses being probed for an IR receiver. Now that each driver explicitly says which addresses should be probed, maybe some addresses can be dropped from some drivers. Also, the special cases in saa7134-i2c should probably be handled on a per-board basis. This would be more efficient and less risky than always probing extra addresses on all boards. I'll give it a try later. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11807): cx88: remove xc5000 reset for Pinnacle 800iDevin Heitmueller
According to the engineer at PCTV Systems, the xc5000 reset pin is supposed to be on GPIO12. However, despite three nights of effort, pulling that GPIO low didn't reset the xc5000. While pulling MO_SRST_IO low does reset the xc5000, this also resets in the s5h1409 being reset as well. This causes tuning to always fail since the internal state of the s5h1409 does not match the driver's state. Given that the only two conditions in which the driver performs a reset is during firmware load and powering down the chip, I am taking out the reset. We know that the chip is being reset when the cx88 comes online, and not being able to do power management for this board is better than not having any tuning at all. Problem discovered when implementing proper power management for the xc5000, which results in calls to the reset callback *after* s5h1409 is initialized. Cc: Steven Toth <stoth@kernellabs.com> Cc: Chaogui Zhang <czhang1974@gmail.com> Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11735): Enables the Winfast TV2000 XP Global TV IRPieter Van Schaik
Adds support to the remote control of the Winfast TV2000 XP Global TV capture card. A case statement was added in order to initialize the GPIO data structures as well as a case statement for handling the keys correctly when pressed. Thanks to Hermann and Mauro for all the help Signed-off-by: Pieter C van Schaik <vansterpc@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11665): cx88: Add support for the Hauppauge IROnly board.Steven Toth
cx88: Add support for the Hauppauge IROnly board. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-07dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06V4L/DVB (11380): v4l2-subdev: change s_routing prototypeHans Verkuil
It is no longer needed to use a struct pointer as argument, since v4l2_subdev doesn't require that ioctl-like approach anymore. Instead just pass the input, output and config (new!) arguments directly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11377): v4l: increase version numbers of drivers converted to ↵Hans Verkuil
v4l2_subdev. With all the v4l2_subdev changes that were made to these drivers it is a good idea to increase the version number of each driver. It's just the patch level that is increased, except for the zoran and saa7146 drivers where the minor number was increased due to the more substantial changes that were made to those two drivers. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11375): v4l2: use v4l2_i2c_new_probed_subdev_addr where appropriate.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11373): v4l2-common: add explicit v4l2_device pointer as first arg ↵Hans Verkuil
to new_(probed)_subdev The functions v4l2_i2c_new_subdev and v4l2_i2c_new_probed_subdev relied on i2c_get_adapdata to return the v4l2_device. However, this is not always possible on embedded platforms. So modify the API to pass the v4l2_device pointer explicitly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11370): v4l2-subdev: move s_std from tuner to core.Hans Verkuil
s_std didn't belong in the tuner ops. Stricly speaking it should be part of the video ops, but it is used by audio and tuner devices as well, so it is more efficient to make it part of the core ops. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11368): v4l2-subdev: move s_standby from core to tuner.Hans Verkuil
s_standby is only used to put the tuner in powersaving mode, so move it from core to tuner. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11305): cx88: prevent probing rtc and ir devicesHans Verkuil
tuner-core.c contains a hack for cx88 board to prevent probing of certain addresses: /* HACK: Ignore 0x6b and 0x6f on cx88 boards. * FusionHDTV5 RT Gold has an ir receiver at 0x6b * and an RTC at 0x6f which can get corrupted if probed. */ With the new i2c API this hack no longer works. So instead change the list of tuner probe addresses in the cx88 driver itself, which is much more clean. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11300): cx88: convert to v4l2_subdev.Hans Verkuil
Convert cx88 to use v4l2_subdev since the old i2c autoprobing mechanism will be removed. Added code to explicitly load tvaudio where needed. Also fix the rtc-isl1208 support: since that driver no longer supports autoprobing it has to be loaded using the new i2c API. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11269): cx88-blackbird: Stop setting buffer type in XXX_fmt_vid_capTrent Piepho
The ->vidioc_(s|g|try|enum)_fmt_vid_cap() methods are only called on VIDEO_CAPTURE buffers. Thus, there is no need to check or set the 'type' field since it must already be set to VIDEO_CAPTURE. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11243): cx88: Missing failure checksAlan Cox
The ioremap one was reported in October 2007 (Bug 9146), the kmalloc one was blindingly obvious while looking at the ioremap one The bug suggests some other configuration for lots of I/O memory (32MB per device is ioremapped) but I'll leave that to the real maintainers Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11127): Kconfig: replace all occurrences of CUSTOMIZE to CUSTOMISEMauro Carvalho Chehab
There are several Kconfig items using CUSTOMIZE. Yet, most use the English writing CUSTOMISE. This generates lots of trouble, because people sometimes type the Kbuild item different. Let's standardise every occurrence using the same syntax. The changes were generated by this small shell script: for i in `find linux -type f`; do sed s,CUSTOMIZE,CUSTOMISE,g $i >/tmp/a && mv /tmp/a $i; done Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11047): cx88: convert to v4l2_device.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10949): Add support for Terratec Cinergy HT PCI MKIIStephan Wienczny
This patch adds support for Terratec Cinergy HT PCI MKII with card id 79. Its more or less a copy of Pinnacle Hybrid PCTV. Thanks to k1ngf1sher on forum.ubuntuusers.de for the idea to copy that card. Signed-off-by: Stephan Wienczny <stephan@wienczny.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>