summaryrefslogtreecommitdiffstats
path: root/drivers/media/video/cx88
AgeCommit message (Collapse)Author
2008-03-20V4L/DVB (7267): cx88: Fix: Loads tuner module before sending commands to itMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7201): cx88-mpeg: Fix race condition in variable accessRicardo Cerqueira
There was a possible race condition in the increment/decrement of the active device references counter. Thanks to Trent Piepho (xyzzy@speakeasy.org) for bringing it up. Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7194): cx88-mpeg: Allow concurrent access to cx88-mpeg devicesRoland Stoll
It currently isn't possible to open the frontend device of cx88-mpeg devices (DVB or Blackbird) multiple times concurrently. (for instance, to attach a signal monitoring tool while reading a stream, or to send a frequency change ioctl) This patch fixes that condition. Signed-off-by: Roland Stoll <roland@xindex.de> Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-31[ALSA] Remove sound/driver.hTakashi Iwai
This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-25V4L/DVB (7059): cx88: Ensure the tuner is reset correctlySteven Toth
Previous patches assume the tuner was on a different gpio. This patch corrects this. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Chaogui Zhang <czhang1974@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7058): IR corrections for the Pinnacle 800iSteven Toth
IR corrections for the Pinnacle 800i Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Chaogui Zhang <czhang1974@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7046): Finalise support for the Pinnacle HD 8000iSteven Toth
Correctly set the atatch structures, enable IR, configure the xc5000 tuner includes. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7045): xc5000: Small amount of cleanup and commentingSteven Toth
xc5000: Small amount of cleanup and commenting, just for clarification. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7043): New card supported(partially): Pinnacle 800iSteven Toth
From Zhang: This patch continues the support for the Pinnacle HD 800i. Patch committed as-is, cleanups to follow ... Steve Signed-off-by: Chaogui Zhang <czhang1974@gmail.com> Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6861): cx2341x: command argument should be u32 instead of intHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6837): Convert cx88_input.audioroute to a bitfieldMichael Krufky
Prevent us from wasting some extra bytes of memory Thanks to Trent Piepho, for pointing this out. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6836): Fix CodingStyle troubles caused by the previous cx88 commitsMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6834): cx88-video: Enable selection of the WM8775 for cx88 cardsFrej Drejhammar
The auto selection of pertinent helper chips (VIDEO_HELPER_CHIPS_AUTO) should select the wm8775 driver, which is used by at least one Conexant 2388x based card (Hauppauge HVR-1300), if VIDEO_CX88 is selected. Signed-off-by: Frej Drejhammar <frej.drejhammar@gmail.com> Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6833): Don't limit cx88 audio routing to blackbird boardsRicardo Cerqueira
All cx2388 boards need the line-in audio to be routed from an external ADC (refered to as "ADC mode" in the spec sheet), since the chip is uncapable of dealing with baseband audio directly. So... this patch enables normal mode when using the tuner (TV or Radio), and enables ADC mode with any other source. It'll probably only work with boards that have supported ADCs (such as the Wolfson wm9775) Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6832): cx88-blackbird: don't mute audio when stopping the codecMichael Krufky
We should not mute the audio input when we stop the codec, because it will interfere with the live uncompressed stream. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Reviewed-by: Jelle Foks <jelle@foks.8m.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6831): Audio routes fix for blackbird boards with the wm8775 ADCRicardo Cerqueira
Fix lack of audio on the MPEG-2 stream of wm8775 based blackbirds. The wm8775 module initializes the audio input at "route 2", which doesn't hold true for all boards. The HVR-1300, for example, uses route 1 for tuner audio, and route 2 for baseband. So we must route the audio to the proper input depending on what video input is being used. Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6830): cx88-blackbird: remove unnecessary encoder unmuteJelle Foks
Remove the unnecessary BLACKBIRD_UNMUTE calls to the mpeg encoder in cx88-blackbird.c The encoder is never muted, hence unmuting should then only be necessary once after hardware initialization. I tested this from warm boots and cold boots (with long power down time to ensure the sram in the chip is emptied), and found that after the firmware upload the encoder is apparently not muted, making the unmutes unnecessary. Signed-off-by: Jelle Foks <jelle@foks.8m.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6829): cx88-blackbird: remove unnecessary msleep()'sJelle Foks
Remove the unnecessary msleep()'s in cx88-blackbird.c Signed-off-by: Jelle Foks <jelle@foks.8m.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6828): cx88-blackbird: audio improvementsJelle Foks
This patch should fix the 'muted audio' and 'raspy audio' problem for mpeg2 streams out of cx88-blackbird devices. Especially mythtv users would find that the audio would often sound bad (aliased, or 'raspy'), mainly related to channel changes, many (all?) other users would find that there was no audio at all in the mpeg data from the encoder chip, unless the audio was manually unmuted. The patch includes the following modifications: Don't actually start the mpeg2 encoder until the device is read from by the application. Wait until the audio is stable for at least 400ms before starting the mpeg encoder. Mute/Unmute the audio when starting/stopping the mpeg encoder. Stop the mpeg encoder when changing parameters and when changing tuner frequency. Add a variable 'mpeg_active' to struct cx8802_dev to allow tracking of whether or not the mpeg2 encoder is active. Load the firmware on cx88-blackbird driver load. Signed-off-by: Jelle Foks <jelle@foks.8m.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6600): V4L: videobuf: don't chew up namespace STATE_.*, convert to ↵Brandon Philips
VIDEOBUF_ s/STATE_NEEDS_INIT/VIDEOBUF_NEEDS_INIT/g s/STATE_PREPARED/VIDEOBUF_PREPARED/g s/STATE_QUEUED/VIDEOBUF_QUEUED/g s/STATE_ACTIVE/VIDEOBUF_ACTIVE/g s/STATE_DONE/VIDEOBUF_DONE/g s/STATE_ERROR/VIDEOBUF_ERROR/g s/STATE_IDLE/VIDEOBUF_IDLE/g Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6576): cx88-mpeg.c: make 4 functions staticAdrian Bunk
This patch makes the following needlessly global functions static: - cx8802_init_common() - cx8802_fini_common() - cx8802_suspend_common() - cx8802_resume_common() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6386): Add support for radio on CX88_BOARD_MSI_TVANYWHERE_MASTERMauro Carvalho Chehab
This board has some special tea5767 configuration. Basically, radio XTAL uses a different frequency than the other supported radios. It uses a 13 MHz XTAL. This patch adds the proper radio gpio and tea5767 configurations for the board. Also, with PAL/BG, the board requires some special init for tda9887: port1=0 port2=0 qss=1 Thanks to Serge Kolotylo and MIDImaster for their help on identifying the proper needs for this driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6384): Replace TDA9887_SET_CONFIG by TUNER_SET_CONFIGMauro Carvalho Chehab
Currently, the only tuner-specific device that allows special configurations is tda9887. However, tea5767 also may require some special configurations (for example, to specify a different Xtal freq). This patch replaces TDA9887_SET_CONFIG by a more generic internal ioctl (TUNER_SET_CONFIG). The newer one allows specifying what tuner is appliable to a configuration set, and allows an arbitrary configuration struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-11V4L/DVB (6602): V4L: Convert videobuf drivers to videobuf_stopBrandon Philips
Drivers were using cookie cutter code for stopping the read/stream. Use the new videobuf_stop function which is lock safe. Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-04V4L/DVB (6479): use input functions, should depend on INPUTRandy Dunlap
All of these drivers select VIDEO_IR, which uses the input subsystem, so they should also depend on INPUT. Problem examples: drivers/built-in.o: In function `ir_input_key_event': ir-functions.c:(.text+0x10849a): undefined reference to `input_event' ir-functions.c:(.text+0x1084ac): undefined reference to `input_event' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11cc0a): undefined reference to `get_key_pinnacle_color' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11cc4f): undefined reference to `get_key_pinnacle_grey' drivers/built-in.o: In function `saa7134_input_fini': (.text+0x11cd8b): undefined reference to `input_unregister_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d1fa): undefined reference to `input_allocate_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d317): undefined reference to `input_register_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d6ca): undefined reference to `input_free_device' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c3f3): undefined reference to `ir_codes_hauppauge_new' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c450): undefined reference to `ir_codes_pinnacle_color' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c480): undefined reference to `ir_codes_purpletv' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c495): undefined reference to `ir_codes_pinnacle_grey' drivers/built-in.o: In function `saa7134_ir_start': (.text+0x11c622): undefined reference to `ir_rc5_timer_end' drivers/built-in.o: In function `saa7134_ir_start': (.text+0x11c637): undefined reference to `ir_rc5_timer_keyup' drivers/built-in.o: In function `build_key': saa7134-input.c:(.text+0x11c769): undefined reference to `ir_extract_bits' saa7134-input.c:(.text+0x11c7ad): undefined reference to `ir_input_keydown' saa7134-input.c:(.text+0x11c7f0): undefined reference to `ir_input_keydown' saa7134-input.c:(.text+0x11c7f9): undefined reference to `ir_input_nokey' saa7134-input.c:(.text+0x11c806): undefined reference to `ir_input_nokey' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ca07): undefined reference to `ir_codes_encore_enltv' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11caf6): undefined reference to `ir_input_init' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cbf2): undefined reference to `ir_codes_avermedia' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc24): undefined reference to `ir_codes_pctv_sedna' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc53): undefined reference to `ir_codes_flydvb' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc85): undefined reference to `ir_codes_videomate_tv_pvr' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ccb7): undefined reference to `ir_codes_pixelview' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cce9): undefined reference to `ir_codes_eztv' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cd1b): undefined reference to `ir_codes_manli' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cda8): undefined reference to `ir_codes_cinergy' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cdd7): undefined reference to `ir_codes_flyvideo' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ce06): undefined reference to `ir_codes_asus_pc39' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ce7d): undefined reference to `ir_codes_gotview7135' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cee1): undefined reference to `ir_codes_proteus_2309' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6336): cx8802: Plug memory leak when unregistering a driverTrent Piepho
When a cx8802 sub-driver was unregistered, the struct cx8802_driver, which was kmalloc()ed by cx8802_register_driver(), was deleted from the list of drivers, but never freed. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6335): cx8802: Replace list_for_each+list_entry with ↵Trent Piepho
list_for_each_entry Less code and more efficient. Got ride of a variable that counted the number of devices in cx8802_unregister_driver() but was never used. Looked leftover from a cut&paste. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6334): cx88: Change (struct cx8802_dev)->drvlist to a list_head and ↵Trent Piepho
fix bugs It was a struct cx8802_driver for no apparent reason. Nothing uses a cx8802_driver in the cx8802_dev struct. The only field that was used was devlist, a list_head. The code in cx8802_remove() that removed any loaded sub-drivers was broken. It would delete the current list entry, but didn't use list_for_each_safe. It also called list_del() on the list _head_ inside the list_for_each loop? It would crash if it was run, which I don't think can ever happen. Since the cx8802 sub-drivers use the cx8802 driver, they have to be unloaded first. So there isn't any way for a sub-driver to still be loaded when cx8802_remove() is called... Except maybe with PCI hot-plug, if one removes the PCI card while the drivers are loaded? So I left some code in to handle that if it's actually possible. It will remove the sub-drivers from the device cx8802_remove() was called on, and only that device. If one has two DVB cards and unplugs one, there is no reason to unload the DVB drivers for both cards. I have no way to test this, but it can't be worse than what was there before. cx8802_get_driver() is passed a cx8802_dev pointer and looks for the requested driver on that device. It first loops over the cx8802 device list looking for the device it was passed, which is pointless. It doesn't need to find the device pointer in the list, as it already has the pointer. The list_head in the cx8802_driver struct, which joins all the _drivers_ attached to a device, was named devlist. Changed that to drvlist, since the devlist is used for a list of _devices_ in other cx8802 structs. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6333): cx88: Change void* card_priv to struct vp3054_i2c_stateTrent Piepho
card_priv was only used to store a pointer to the vp3054 state struct. There's no need to use a void * since it doesn't have multiple types. Make the field conditional on VP3045 support. It was already conditional on DVB support, but it's only used if VP3045 support is on, so that makes for a better option to check. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6332): cx88: Only include the blackbird fields if blackbird is selectedTrent Piepho
Add some ifdefs around fields only used for blackbird support, similar to the way the dvb fields are only included with dvb support. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6321): Remove obsolete VIDIOC_S/G_MPEGCOMP ioctlsHans Verkuil
Remove the obsolete VIDIOC_G_MPEGCOMP and VIDIOC_S_MPEGCOMP ioctls from the V4L2 API as per the removal schedule (October 2007). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6320): v4l core: remove the unused .hardware V4L1 fieldMauro Carvalho Chehab
struct video_device used to define a .hardware field. While initialized on severl drivers, this field is never used inside V4L. However, drivers using it need to include the old V4L1 header. This seems to cause compilation troubles with some random configs. Better just to remove it from all drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6187): cx88-alsa: Add TLV supportTrent Piepho
Lets mixer apps display a dB range for the volume control. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-22V4L/DVB (6185): cx88-alsa: Add mute controls, change control namesTrent Piepho
Add two mute controls. One mutes everything, the other just mutes the analog pass-through output. Rename the existing volume control. The controls are now: Playback Volume Playback Switch Capture Switch These names might seem odd, but I believe they are more correct. The previous "Capture Volume" control didn't actually effect the volume of the captured audio. Instead it controls the volume of the analog pass-thought output. It appears that pass-through controls like this are usually considered to be in the playback direction, not capture. For example, "CAPTURE feedback Playback Volume" is the name used for a control that appears to have the same effect in the ca0106 driver. We only have one volume control, so we can omit the "CAPTURE feedback" part. If someone where to add PCM playback support to the driver, then this would be the volume control. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-16[ALSA] Changed Jaroslav Kysela's e-mail from perex@suse.cz to perex@perex.czJaroslav Kysela
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-10V4L/DVB (6312): cx88: Replace list_for_each+list_entry with list_for_each_entryTrent Piepho
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6283): videobuf: Remove references to old Kconfig option nameTrent Piepho
CONFIG_VIDEO_BUF_DVB became CONFIG_VIDEOBUF_DVB. But in these cases, it makes more sense to use CONFIG_VIDEO_SAA7134_DVB or CONFIG_VIDEO_CX88_DVB_MODULE depending on the driver. The reference in cx23885.h should just be removed, as the code there needs to be included if DVB is on or off. I do not think you can even compile the cx23885 driver without DVB. It's clearly just leftover from when the file was obvious copied from the cx88 driver (which is not mentioned in the copyright BTW). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6260): Fix Kconfig dependencyMauro Carvalho Chehab
Thanks to Michael Krufky for pointing this to me. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-10V4L/DVB (6257): Rename video-buf-dvb to videobuf-dvb to be consistent with ↵Mauro Carvalho Chehab
the other patches Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6252): Adapt drivers to use the newer videobuf modulesMauro Carvalho Chehab
PCI-dependent videobuf_foo methods were renamed as videobuf_pci_foo. Also, videobuf_dmabuf is now part of videobuf-dma-sg private struct. So, to access it, a subroutine call is needed. This patch renames all occurences of those function calls to be consistent with the video-buf split. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981 Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>
2007-10-09V4L/DVB (6247): Fix bug #8689: Fixes IR stop/start during suspend/resumeMauro Carvalho Chehab
IR workqueue should be disabled during suspend. This avoids some troubles, like the one reported on bug #8689: "The Hauppauge HVR 1100 ir-remote control does not work after resume from suspend to ram or disk." This patch disables IR before suspending, re-enabling it after resume. Thanks to Peter Poklop <Peter.Poklop@gmx.at> for reporting it and helping with the fix. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Reviewed-by: Peter Poklop <Peter.Poklop@gmx.at>
2007-10-09V4L/DVB (6186): cx88-alsa: Remove some unused fields in card state structTrent Piepho
Not sure why they are there, but they don't do anything now. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6184): cx88-alsa: Make volume control stereoTrent Piepho
Use the balance control to make the mono volume control stereo. Note that full range isn't supported. The balance control attenuates one channel by 0 to -63 dB, and the volume control provides additional attenuation to both channels by another 0 to -63 dB. So the channel with the most attenuation has a range of 0 to -126 dB, while the other channel only has a range of 0 to -63 dB. ALSA volume controls don't appear to support this concept. I just limited the range to 0 to -63 total. Once you get to -63 dB, you're already at silence, so additional attenuation is pretty much pointless anyway. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6181): cx88: auto-load rtc and ir receiver i2c modules for ↵Michael Krufky
FusionHDTV5 RT Gold Auto-load ir-kbd-i2c for ir receiver support, and rtc-isl1208 for rtc support for the FusionHDTV5 RT Gold. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6125): whitespace cleanup: replace leading spaces with tabsMichael Krufky
There were many instances of 7-space indents spread throughout the v4l-dvb tree. This patch replaces the 7-space indents with tabs. The whitespace cleaner script doesn't catch these, because it assumes that all indents are 8-space. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6088): cx2341x: some controls can't be changed while the device is busyHans Verkuil
The driver should now pass the 'busy' state of the device to the cx2341x module whenever controls are set or tried. -EBUSY will be returned if the device is busy and the user attempts to modify certain 'dangerous' controls. It concerns controls that change the audio or video compression mode and bitrates. The cx88-blackbird and pvrusb2 drivers currently always pass '0' (not busy) to the cx2341x, effectively keeping the old behavior for now. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6085): cx88-alsa: Fix mmap supportTrent Piepho
The driver has long claimed to support mmap, but it didn't work at all. Some of the dma buffer parameters weren't set, and since video_buf uses vmalloc to allocate the buffer, a page callback is needed too. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6084): cx88-alsa: Eliminate snd_cx88_cardsTrent Piepho
The driver kepts a static global array of snd_card pointers for each card probed, which was never used. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6083): cx88-alsa: Rework buffer handlingTrent Piepho
Rework the way the DMA buffer is handled and IRQs are generated. ALSA uses a ring-buffer of multiple periods. Each period is supposed to corrispond to one IRQ. The existing driver was generating one interrupt per ring-buffer, as opposed to per period. This meant that as soon as the IRQ was generated, the hardware was already starting to re-write the beginning of the buffer. Since the DMA happens on a per-line basis, there was only a narrow window to copy the data out before the buffer was overwritten. The cx88 core RISC program generator is modified so that it can set the IRQ and counter flags to count every X lines of DMA transfer. This way we can generate an interrupt every period instead of every full ring-buffer. Right now only period of one line are supported, but it should be possible to support longer periods. Note that a WRITE instruction generates an IRQ when it starts, not when the transfer is finished. Thus to generate an IRQ when line X is done, one must set the IRQ flag on the instruction that starts line X+1, not the one that ends line X. Change the line size so that there are four lines in the SRAM FIFO. If there are not four lines, the analog output from the cx88's internal DACs is full of clicks and pops. Try to handle FIFO sync errors. Sometimes the chip generates many of these errors before audio data starts. Up to 50 sync errors will be ignored and the counter reset. Have the IRQ handler save the RISC counter to the chip struct, and then have the pointer callback use this to calculate the pointer position. We could read the counter from the pointer callback, but sometimes the sync errors on start up cause the counter to go crazy. ALSA sees this and thinks there has been an overrun. The IRQ hander can avoid saving the counter position on sync errors. The chip "opened" flag wasn't necessary. ALSA won't try to open the same substream multiple times. Probably this code was cut&pasted from the bt87x driver, which has multiple sub-streams for one chip. Do error checking for the videobuf mapping functions. snd_card_cx88_runtime_free() is useless and can be deleted. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09V4L/DVB (6082): cx88: Improve risc instruction printing in sram channel dumpTrent Piepho
When the risc instrunctions from the CMDS were printed, instruction arguments weren't taken into account. This changes output like: cx88[0]: risc0: 0x1d010400 [ write sol eol irq1 cnt0 count=1024 ] cx88[0]: risc1: 0x0cac2800 [ INVALID sol eol 23 21 19 18 13 count=2048 ] cx88[0]: risc2: 0x1d010400 [ write sol eol irq1 cnt0 count=1024 ] cx88[0]: risc3: 0x0cac2c00 [ INVALID sol eol 23 21 19 18 13 count=3072 ] cx88[0]: risc0: 0x1d010400 [ write sol eol irq1 cnt0 count=1024 ] cx88[0]: risc1: 0x0cac2800 [ arg #1 ] cx88[0]: risc2: 0x1d010400 [ write sol eol irq1 cnt0 count=1024 ] cx88[0]: risc3: 0x0cac2c00 [ arg #1 ] Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-29 08:42:23 +0000