summaryrefslogtreecommitdiffstats
path: root/drivers/media/video/em28xx/em28xx.h
AgeCommit message (Collapse)Author
2008-02-18V4L/DVB (7179): Allow more than one em28xx boardMauro Carvalho Chehab
em28xx driver is capable of handling more than one usb device. However, isoc transfers require a large amount of data to be transfered. Before this patch, just one em28xx board were enough to allocate more than 50% URBs: T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8 B: Alloc=480/800 us (60%), #Int= 0, #Iso= 2 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 So, only one board could use an USB host at the same time. After the patch, it is possible to use more than one em28xx at the same time, on the same usb host, if the image size is slower or equal to 345600, since those images will require about 30% of the URBs: T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8 B: Alloc=232/800 us (29%), #Int= 0, #Iso= 2 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 So, in thesis, after the patch, it would be possible to use up to 3 boards by each usb host, if the devices are generating small images. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7164): em28xx-alsa: Add a missing mutexMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7106): em28xx/: make 2 functions staticAdrian Bunk
This patch makes the following needlessly global functions static: - em28xx-core.c:em28xx_write_reg_bits() - em28xx-video.c:em28xx_vdev_init() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7060): em28xx: remove has_tunerMauro Carvalho Chehab
has_tuner flag doesn't make much sense, since tuner_type=TUNER_ABSENT means the same thing. Having two ways to say that a tuner is not present is not nice, since it may lead to bad setups. In fact, with the previous code, if a device were using has_tuner=0, but the user forces a tuner, with modprobe option tuner=type, the modprobe option won't work. Also, tveeprom returns TUNER_ABSENT, when tuner is unknown or absent. So, with the previous logic, in this case, the driver should set has_tuner=0, or has_tuner=1 otherwise. Instead of adding several additional tests and setups, better just to remove .has_tuner. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (7021): Move all board specific configuration to em28xx-cards.cMauro Carvalho Chehab
This cleanup moves the board-specific configurations to em28xx-cards.c. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6956): Add Radio support for em28xxMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6955): Properly implement 12MHz I2S supportMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6952): Add code for autoloading em28xx-alsa, if neededMauro Carvalho Chehab
Older em28xx devices does implement standard Audio Class. However, on newer devices, this were replaced by a Vendor Class. This patch autodetects that an em28xx lacks Audio Class and auto-loads em28xx-alsa, for the devices that implements only a Vendor Class. For devices with Audio Class, snd-usb-audio module will provide an ALSA interface. This patch uses the request_module_async function as defined on cx88-mpeg.c, originally wrote by Markus Rechberger. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6951): Integrates em28xx-audio.c into em28xx kernel moduleMauro Carvalho Chehab
Also fixes the remaining CodingStyle issues that Lindent didn't fix. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6948): HVR950 requires additional settings for audio to properly workMauro Carvalho Chehab
Thanks to Markus Rechberger <mrechberger@gmail.com> for retriving those commands. Also, MTS firmware is required for audio to work on HVR950. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6947): Improve audio setup handlingMauro Carvalho Chehab
It is possible to select audio inputs via em28xx or via ac97 functions. This patch allows configuring a board to use either one way. It also do some cleanups at audio setup configurations. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6659): Convert MTS to bitfieldMauro Carvalho Chehab
Xc2028.3028 has two type of firmwares: audio-standard specific ones and baseband MTS firmwares. MTS firmwares provide stereo decoding for 6 MHz BTSC/EIAJ and for monoaural audio decoding on 8 MHz firmwares. It seems that the option to use MTS or a standard-specific audio decoding depends on the way xc2028/3028 is connected. Instead of wasting 32 (or 64 bits) to signalize if the driver needs to use MTS firmware, this patch converts it to a bitfield that can be shared with other proprieties of xc2028/3028. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6619): Use MTS firmware for the HVR-900Aidan Thornton
The HVR-900 requires the MTS version of the xc3028 firmware in order to get any sound. The below patch selects this firmware variant on HVR-900 cards, as well as splitting the HVR-950 into its own entry (since I don't know if it uses the MTS variant and it will have to be split off eventually anyway). Signed-off-by: Aidan Thornton <makosoft@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6587): Cleanup at tv norm selectionMauro Carvalho Chehab
With the conversion to the vidio_ioctl2, tvnorms array is not required anymore. Also, removed some code from V4L1 time (VIDEO_MODE_foo), specied at the non-used video_decoder.h. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6586): Remove some dead code and make drive fully V4L2 compatibleMauro Carvalho Chehab
There were some vestiges of an old V4L1 I2C driver that were called by em28xx. This patch removes this dead code, and replaces videodev.h to videodev2.h Now, this driver doesn't require V4L1 anymore. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6584): Fix read() methodMauro Carvalho Chehab
Backport read() fixes from Markus Rechberger. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6583): Fix em28xx read stream lockingMauro Carvalho Chehab
On some situations, closing an streaming application and re-opening were returning -EBUSY. Uses the same locking schema also present on cx88. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6582): Fix em28xx to allow multiple openMauro Carvalho Chehab
Allows shared access support for em28xx. Just one userspace application is allowed to get stream. The other(s) application(s) can change V4L2 controls, set video standards, etc. This patch were splited from Markus Rechberger's tree and backported to 2.6.17 by Pádraig Brady. The original patch were ported to the latest em28xx version and had CodingStyle corrected to solve the issues pointed by scripts/checkpatch.pl. Thanks to Pádraig Brady <P@draigBrady.com> for pointing this. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6545): em28xx: autodetect Cinergy 200 USB and VGear PocketTVSascha Sommer
Adds autodetection support for the Cinergy200 USB and the VGear PocketTV. Whenever a usb device with generic empia em2800 usb ids is detected the device gets scanned for connected i2c devices. If the device list matches an em2800 device in the device list the model id gets changed accordingly. Signed-off-by: Sascha Sommer <saschasommer@freenet.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6539): em28xx: add support for vgear pockettvSascha Sommer
attached patch adds support for the vgear pockettv. It seems to require a write to another register for audio to work. I checked my old cinergydrv and we did the same register write there. I therefore enabled it for all em2800 based devices. Signed-off-by: Sascha Sommer <saschasommer@freenet.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6538): em28xx: fix locking to allow accesses from 2 different ↵Sascha Sommer
threads at the same time The attached patch modifies the em28xx driver so that there can be ioctls from multiple different threads. This is necessary for capture apps like MPlayer that use different threads for capturing and channel tuning. Now the locking is only done for the ioctls that change properties of the device or access the i2c bus. It also removes some locks that look unnecessary: In em28xx_init_dev: the videodevice is not registered yet so nothing can access the hardware meanwhile, the device struct is not assigned to the interface yet so no race with disconnect is possible In em28xx_release_resources: it gets only called when dev->lock is already held Signed-off-by: Sascha Sommer <saschasommer@freenet.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6537): Add entry for Pixelview Prolink PlayTV USB 2.0Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25V4L/DVB (6536): Add a hint for boards without unique USB IDMauro Carvalho Chehab
This patch adds a function to allow trying to detect boards that shares the generic IDs. The current detection method is based at eeprom checksum. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3963): Em28xx/: possible cleanupsAdrian Bunk
This patch contains the following possible cleanups: - make the following needlessly global functions static: - em28xx-core.c: em28xx_accumulator_set() - em28xx-core.c: em28xx_capture_area_set() - em28xx-core.c: em28xx_scaler_set() - em28xx-core.c: em28xx_isocIrq() - remove the following unused EXPORT_SYMBOL's: - em28xx-cards.c: em28xx_boards - em28xx-cards.c: em28xx_bcount - em28xx-cards.c: em28xx_id_table Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3715): Change all emails to the currently used one.Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-07V4L/DVB (3326): Adding support for Terratec Prodigy XSMarkus Rechberger
Adding support for Terratec Prodigy XS Signed-off-by: Markus Rechberger <mrechberger@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-07V4L/DVB (3318b): sem2mutex: drivers/media/, #2Ingo Molnar
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-07V4L/DVB (3276): Added terratec hybrid xs and kworld 2800rf supportMarkus Rechberger
- Added terratec hybrid xs product/vendorid - Added gpio audio initialization for kworld pvr 2800rf Signed-off-by: Markus Rechberger <mrechberger@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-23V4L/DVB (3432): Hauppauge HVR 900 Composite supportMarkus Rechberger
- Hauppauge HVR 900 Composite support Signed-off-by: Markus Rechberger <mrechberger@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-23V4L/DVB (3421): Several fixes to prepare for VBIMauro Carvalho Chehab
- Fixed VBI compilation. - Included capacity to specify vbi and video number. - Added a better control for using more than one em28xx device. - VIDIOC_G_FMT now calls a function. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-09V4L/DVB (3277): Fix incorrect filename reference in top commentsMichael Krufky
- Fix incorrect filename reference in top comments Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3269): ioctls cleanups.Michael Krufky
- Now, all internal ioctls are at v4l2-common.h - removed unused ioctl at saa6752hs.h - all debug ioctl code moved to v4l2-common.c - removed duplicated stuff from other cards Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3233): Fixed API to set I2S speed controlMauro Carvalho Chehab
- Created a new ioctl to control I2S speed. Old calls to an inadequate V4L2 API replaced. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-12-19[PATCH] V4L/DVB (3188): Fix compilation failure with gcc 2.95.3.Jean Delvare
- Fix compilation failure with gcc 2.95.3. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-12-12[PATCH] V4L/DVB: (3086c) Whitespaces cleanups part 4Mauro Carvalho Chehab
Clean up whitespaces at v4l/dvb files Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] V4L: 920: fixed autodetection of max size by if alternate settingMauro Carvalho Chehab
- Fixed autodetection of max size by if alternate setting - Fixed some debug messages Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 886: renamed common structures to em28xxMauro Carvalho Chehab
- Renamed common structures to em28xx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 863: added pinnacle dazzle dvc 90Mauro Carvalho Chehab
- Added Pinnacle Dazzle DVC 90 Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 840: fixed settings for msi vox usb 2.0 saa7114 is missing atmMarkus Rechberger
- Fixed settings for MSI Vox USB 2.0 (saa7114 is missing atm) Signed-off-by: Markus Rechberger <mrechberger@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 813: replaced obsolete video get drvdata and video set drvdataMarkus Rechberger
- Replaced obsolete video_get_drvdata and video_set_drvdata Signed-off-by: Markus Rechberger <mrechberger@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 800: whitespace cleanupsMauro Carvalho Chehab
- Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 786: chip id removed since it isn t required anymoreSascha Sommer
- Chip_id removed since it isn't required anymore. Signed-off-by: Sascha Sommer <saschasommer@freenet.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 784: several improvement on i2c ir handling for em2820Mauro Carvalho Chehab
- Several Improvement on I2C IR handling for em2820: - moved Pinnacle IR table (ir_codes_em2820) to em2820-input.c - IR struct renamed and moved to a header file. - New file to handle em2820-specific IR. - Some cleanups. - attach now detects I2C IR and calls em2820-specific IR code - IR compat code moved to compat.h - New header with struct IR_i2c there, to allow it to be used by board-specific input handlers. - Some improvements at em28xx board detection: - Board detection message improved to show interface and class. - Now it doesn't touch audio interfaces. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 767: included support for em2800Mauro Carvalho Chehab
- Included support for em2800. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] v4l: 716: support for em28xx board familyakpm@osdl.org
- Added support for em28xx board family Signed-off-by: Ludovico Cavedon <cavedon@sssup.it> Signed-off-by: Markus Rechberger <mrechberger@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-03-12 03:47:49 +0000