summaryrefslogtreecommitdiffstats
path: root/drivers/media/video/usbvision/usbvision-video.c
AgeCommit message (Collapse)Author
2012-08-15[media] rename most media/video usb drivers to media/usbMauro Carvalho Chehab
Rename all USB drivers with their own directory under drivers/media/video into drivers/media/usb and update the building system. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-09[media] usbvision: remove V4L2_FL_LOCK_ALL_FOPSHans Verkuil
Add proper locking to the file operations, allowing for the removal of the V4L2_FL_LOCK_ALL_FOPS flag. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-05-14[media] v4l2-dev: add flag to have the core lock all file operationsHans Verkuil
This used to be the default if the lock pointer was set, but now that lock is by default only used for ioctl serialization. Those drivers that already used core locking have this flag set explicitly, except for some drivers where it was obvious that there was no need to serialize any file operations other than ioctl. The drivers that didn't need this flag were: drivers/media/radio/dsbr100.c drivers/media/radio/radio-isa.c drivers/media/radio/radio-keene.c drivers/media/radio/radio-miropcm20.c drivers/media/radio/radio-mr800.c drivers/media/radio/radio-tea5764.c drivers/media/radio/radio-timb.c drivers/media/video/vivi.c sound/i2c/other/tea575x-tuner.c The other drivers that use core locking and where it was not immediately obvious that this flag wasn't needed were changed so that the flag is set together with a comment that that driver needs work to avoid having to set that flag. This will often involve taking the core lock in the fops themselves. Eventually this flag should go and it should not be used in new drivers. There are a few reasons why we want to avoid core locking of non-ioctl fops: in the case of mmap this can lead to a deadlock in rare situations since when mmap is called the mmap_sem is held and it is possible for other parts of the code to take that lock as well (copy_from_user()/copy_to_user() perform a down_read(&mm->mmap_sem) when a page fault occurs). It is very unlikely that that happens since the core lock serializes all fops, but the kernel warns about it if lock validation is turned on. For poll it is also undesirable to take the core lock as that can introduce increased latency. The same is true for read/write. While it was possible to make flags or something to turn on/off taking the core lock for each file operation, in practice it is much simpler to just not take it at all except for ioctl and leave it to the driver to take the lock. There are only a handful fops compared to the zillion ioctls we have. I also wanted to make it obvious which drivers still take the lock for all fops, so that's why I chose to have drivers set it explicitly. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-27[media] Stop using linux/version.h on most video driversMauro Carvalho Chehab
All the modified drivers didn't have any version increment since Jan, 1 2011. Several of them didn't have any version increment for a long time, even having new features and important bug fixes happening. As we're now filling the QUERYCAP version with the current Kernel Release, we don't need to maintain a per-driver version control anymore. So, let's just use the default. In order to preserve the Kernel module version history, a KERNEL_VERSION() macro were added to all modified drivers, and the extraver number were incremented. I opted to preserve the per-driver version control to a few pwc, pvrusb2, s2255, s5p-fimc and sh_vou. A few drivers are still using the legacy way to handle ioctl's. So, we can't do such change on them, otherwise, they'll break. Those are: uvc, et61x251 and sn9c102. The rationale is that the per-driver version control seems to be actively maintained on those. Yet, I think that the better for them would be to just use the default version numbering, instead of doing that by themselves. While here, removed a few uneeded include linux/version.h Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-23Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (247 commits) [media] gspca - sunplus: Fix some warnings and simplify code [media] gspca: Fix some warnings tied to 'no debug' [media] gspca: Unset debug by default [media] gspca - cpia1: Remove a bad conditional compilation instruction [media] gspca - main: Remove USB traces [media] gspca - main: Version change to 2.13 [media] gspca - stk014 / t613: Accept the index 0 in querymenu [media] gspca - kinect: Remove __devinitdata [media] gspca - cpia1: Fix some warnings [media] video/Kconfig: Fix mis-classified devices [media] support for medion dvb stick 1660:1921 [media] tm6000: fix uninitialized field, change prink to dprintk [media] cx231xx: Add support for Iconbit U100 [media] saa7134 add new TV cards [media] Use a more consistent value for RC repeat period [media] cx18: Move spinlock and vb_type initialisation into stream_init [media] tm6000: remove tm6010 sif audio start and stop [media] tm6000: remove unused exports [media] tm6000: add pts logging [media] tm6000: change from ioctl to unlocked_ioctl ...
2011-05-20[media] usbvision: add Nogatech USB MicroCamOndrej Zary
Add Nogatech USB MicroCam PAL (NV3001P) and NTSC (NV3000N) support to usbvision driver. PAL version is tested, NTSC untested. Data captured using usbsnoop, init_values are listed in the INF file along with image dimensions, offsets and frame rates. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-04-26treewide: cleanup continuations and remove logging message whitespaceJoe Perches
Using C line continuation inside format strings is error prone. Clean up the unintended whitespace introduced by misuse of \. Neaten correctly used line continations as well for consistency. drivers/scsi/arcmsr/arcmsr_hba.c has these errors as well, but arcmsr needs a lot more work and the driver should likely be moved to staging instead. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-30[media] usbvision: coding styleHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-30[media] usbvision: convert // to /* */Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-30[media] usbvision: get rid of camelCaseHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-30[media] usbvision: convert to unlocked_ioctlHans Verkuil
Convert driver to use core-assisted locking. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] V4L: remove V4L1 compatibility modeHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-11-17BKL: remove extraneous #include <smp_lock.h>Arnd Bergmann
The big kernel lock has been removed from all these files at some point, leaving only the #include. Remove this too as a cleanup. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-21V4L/DVB: usbvision: remove BKL from usbvisionHans Verkuil
Removed the BKL from usbvision. There was an initialization bug as well where the i2c bus was registered twice. Although when the BKL was present no oops was generated, I did run into other i2c problems. Now that I protect against duplicate i2c registration that bug is now gone as well. But trying to disconnect the USB cable while someone is still using the device still leads to a crash. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-06-01V4L/DVB: drivers/media: Eliminate a NULL pointer dereferenceJulia Lawall
In each case, the print involves dereferencing a value that is NULL or is near NULL. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E,E1; identifier f; statement S1,S2,S3; @@ if ((E == NULL && ...) || ...) { ... when != if (...) S1 else S2 when != E = E1 * E->f ... when any return ...; } else S3 // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: usbvision: don't use usb_set_intfdata, let v4l2_device_register ↵Hans Verkuil
handle this v4l2_device_register already sets intfdata, no need to do this again. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-05-19V4L/DVB: usbvision: remove non-working vbi deviceHans Verkuil
The usbvision driver created vbi device nodes but the actual implementation was just stubs and only returned errors to userspace. In addition it used video_usercopy() and we want to remove that eventually. So remove all the vbi code except for the vbi flag in the card definition should someone ever be mad enough to work on a proper implementation for this driver. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13954): Correct NULL testJulia Lawall
Test the just-allocated value for NULL rather than some other value. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier f; @@ f(...) { <+... return NULL; ...+> } @@ expression *x; expression y; identifier r.f; statement S; @@ x = f(...); ( if ((x) == NULL) S | if ( - y + x == NULL) S ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13556): v4l: Remove unneeded video_device::minor assignmentsLaurent Pinchart
Now that the video_device registration is tested using video_is_registered(), drivers don't need to initialize the video_device::minor field to -1 anymore. Remove those unneeded assignments. [mchehab.redhat.com: removed tm6000 changes as tm6000 is not ready yet for submission even on staging] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13553): v4l: Use the video_is_registered function in device driversLaurent Pinchart
Fix all device drivers to use the video_is_registered function instead of checking video_device::minor. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13550): v4l: Use the new video_device_node_name functionLaurent Pinchart
Fix all device drivers to use the new video_device_node_name function. This also strips kernel log messages from the "/dev/" prefix, has the device node location is a userspace policy decision unknown to the kernel. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13241): Cleanup redundant tests on unsignedRoel Kluin
The variables are unsigned so the test `>= 0' is always true, the `< 0' test always fails. In these cases the other part of the test catches wrapped values. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-23headers: utsname.h reduxAlexey Dobriyan
* remove asm/atomic.h inclusion from linux/utsname.h -- not needed after kref conversion * remove linux/utsname.h inclusion from files which do not need it NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however due to some personality stuff it _is_ needed -- cowardly leave ELF-related headers and files alone. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-12headers: smp_lock.h reduxAlexey Dobriyan
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16V4L/DVB (11992): Add missing __devexit_p()Jean Delvare
Add missing __devexit_p() to several drivers. Also add a few missing __init, __devinit and __exit markers. These errors could result in build failures depending on the kernel configuration. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB: cleanup redundant tests on unsignedRoel Kluin
Remove redundant tests on unsigned. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11377): v4l: increase version numbers of drivers converted to ↵Hans Verkuil
v4l2_subdev. With all the v4l2_subdev changes that were made to these drivers it is a good idea to increase the version number of each driver. It's just the patch level that is increased, except for the zoran and saa7146 drivers where the minor number was increased due to the more substantial changes that were made to those two drivers. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11370): v4l2-subdev: move s_std from tuner to core.Hans Verkuil
s_std didn't belong in the tuner ops. Stricly speaking it should be part of the video ops, but it is used by audio and tuner devices as well, so it is more efficient to make it part of the core ops. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06V4L/DVB (11354): usbvision: use usb_interface.dev for v4l2_device_registerJanne Grunau
Signed-off-by: Janne Grunau <j@jannau.net> Acked-by: Thierry Merle <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11271): usbvision: Remove buffer type checks from enum_fmt_vid_cap, ↵Trent Piepho
XXXbuf The v4l2-ioctl core only allows buffer types for which the corresponding ->vidioc_try_fmt_xxx() methods are defined to be used with vidioc_(q|dq|query)buf() and vidioc_reqbufs(). Since this driver only defines ->vidioc_try_fmt_vid_cap() the checks can be removed from vidioc_reqbufs(), vidioc_qbuf(), and vidioc_dqbuf(). The ->vidioc_(s|g|try|enum)_fmt_vid_cap() methods are only called on VIDEO_CAPTURE buffers. Thus, there is no need to check or set the buffer's 'type' field since it must already be set to VIDEO_CAPTURE. So setting the buffer type in vidioc_enum_fmt_vid_cap() can be removed. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (11045): v4l2: call v4l2_device_disconnect in USB drivers.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10818): usbvision: Don't need to zero ioctl parameter fieldsTrent Piepho
The v4l2 core code in v4l2_ioctl will zero out the structure the driver is supposed to fill in for read-only ioctls. For read/write ioctls, all the fields which aren't supplied from userspace will be zeroed out. Zeroing code is removed from g_audio, queryctrl, and enum_fmt_vid_cap. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10794): v4l2: Move code to zero querybuf output struct to v4l2_ioctlTrent Piepho
For VIDIOC_QUERYBUF only the first two fields, size and type, are used as input. The rest can be filled in by the driver as output. Most drivers do not actually use all the field and unused ones should be zeroed out. Some drivers have code to do this and some drivers should but don't. So put some zero out code in v4l2_ioctl so that all drivers using that system get it. The drivers that have zeroing code get that code removed. Some drivers checked that the type field was valid, but v4l2_ioctl already does this so those checks can be removed as well. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10738): Get rid of video_decoder.h header were uneededMauro Carvalho Chehab
Now, just a few modules are still dependent of this legacy header: $ grep -l DECODER_ `find linux/drivers/media/ -name '*.[ch]' -exec grep -l video_decoder '{}' \;` linux/drivers/media/video/v4l2-ioctl.c linux/drivers/media/video/indycam.c linux/drivers/media/video/saa7191.c linux/drivers/media/video/vino.c Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10692): usbvision: convert to v4l2_device/v4l2_subdev.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10306): usbvision: use usb_make_path to report bus infoThierry MERLE
usb_make_path reports canonical bus info. Use it when reporting bus info in VIDIOC_QUERYCAP. Signed-off-by: Thierry MERLE <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10298): remove err macro from few usb devicesMauro Carvalho Chehab
Patch removes err() macros from few usb devices. It places pr_err in pvrusb2-v4l2.c, dev_err in dabusb and in usbvision drivers. Beside placing dev_err, patch defines new s2255_dev_err macro with S2255_DRIVER_NAME in s2255 module. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Acked-by: Thierry Merle <thierry.merle@free.fr> Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-07V4L/DVB (10185): Use negated usb_endpoint_xfer_control, etcJulia Lawall
This patch extends 134179823b3ca9c8b98e0631906459dbb022ff9b by using usb_endpoint_xfer_control, usb_endpoint_xfer_isoc, usb_endpoint_xfer_bulk, and usb_endpoint_xfer_int in the negated case as well. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ struct usb_endpoint_descriptor *epd; @@ - (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_CONTROL\|0\)) + !usb_endpoint_xfer_control(epd) @@ struct usb_endpoint_descriptor *epd; @@ - (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_ISOC\|1\)) + !usb_endpoint_xfer_isoc(epd) @@ struct usb_endpoint_descriptor *epd; @@ - (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_BULK\|2\)) + !usb_endpoint_xfer_bulk(epd) @@ struct usb_endpoint_descriptor *epd; @@ - (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_INT\|3\)) + !usb_endpoint_xfer_int(epd) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02V4L/DVB (10141): v4l2: debugging API changed to match against driver name ↵Hans Verkuil
instead of ID. Since the i2c driver ID will be removed in the near future we have to modify the v4l2 debugging API to use the driver name instead of driver ID. Note that this API is not used in applications other than v4l2-dbg.cpp as it is for debugging and testing only. Should anyone use the old VIDIOC_G_CHIP_IDENT, then this will be logged with a warning that it is deprecated and will be removed in 2.6.30. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02V4L/DVB (10138): v4l2-ioctl: change to long return type to match unlocked_ioctl.Hans Verkuil
Since internal to v4l2 the ioctl prototype is the same regardless of it being called through .ioctl or .unlocked_ioctl, we need to convert it all to the long return type of unlocked_ioctl. Thanks to Jean-Francois Moine for posting an initial patch for this and thus bringing it to our attention. Cc: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02V4L/DVB (10135): v4l2: introduce v4l2_file_operations.Hans Verkuil
Introduce a struct v4l2_file_operations for v4l2 drivers. Remove the unnecessary inode argument. Move compat32 handling (and llseek) into the v4l2-dev core: this is now handled in the v4l2 core and no longer in the drivers themselves. Note that this changeset reverts an earlier patch that changed the return type of__video_ioctl2 from int to long. This change will be reinstated later in a much improved version. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (10130): use USB API functions rather than constantsJulia Lawall
This set of patches introduces calls to the following set of functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_is_isoc_in(epd) usb_endpoint_is_isoc_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) In some cases, introducing one of these functions is not possible, and it just replaces an explicit integer value by one of the following constants: USB_ENDPOINT_XFER_BULK USB_ENDPOINT_XFER_CONTROL USB_ENDPOINT_XFER_INT USB_ENDPOINT_XFER_ISOC An extract of the semantic patch that makes these changes is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r1@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) == - \(USB_ENDPOINT_XFER_CONTROL\|0\)) + usb_endpoint_xfer_control(epd) @r5@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) == - \(USB_DIR_IN\|0x80\)) + usb_endpoint_dir_in(epd) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9521): V4L: struct device - replace bus_id with dev_name(), ↵Kay Sievers
dev_set_name() This patch is part of a larger patch series which will remove the "char bus_id[20]" name string from struct device. The device name is managed in the kobject anyway, and without any size limitation, and just needlessly copied into "struct device". To set and read the device name dev_name(dev) and dev_set_name(dev) must be used. If your code uses static kobjects, which it shouldn't do, "const char *init_name" can be used to statically provide the name the registered device should have. At registration time, the init_name field is cleared, to enforce the use of dev_name(dev) to access the device name at a later time. We need to get rid of all occurrences of bus_id in the entire tree to be able to enable the new interface. Please apply this patch, and possibly convert any remaining remaining occurrences of bus_id. We want to submit a patch to -next, which will remove bus_id from "struct device", to find the remaining pieces to convert, and finally switch over to the new api, which will remove the 20 bytes array and does no longer have a size limitation. Thanks, Kay Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9503): v4l: remove inode argument from video_usercopyHans Verkuil
The inode argument was never used. Removing it from video_usercopy brings the function pointer type of video_usercopy in line with similar v4l2 functions, thus simplifying several drivers. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-21V4L/DVB (9327): v4l: use video_device.num instead of minor in video%dHans Verkuil
The kernel number of a v4l2 node (e.g. videoX, radioX or vbiX) is now independent of the minor number. So instead of using the minor field of the video_device struct one has to use the num field: this always contains the kernel number of the device node. I forgot about this when I did the v4l2 core change, so this patch converts all drivers that use it in one go. Luckily the change is trivial. Cc: michael@mihu.de Cc: mchehab@infradead.org Cc: corbet@lwn.net Cc: luca.risolia@studio.unibo.it Cc: isely@pobox.com Cc: pe1rxq@amsat.org Cc: royale@zerezo.com Cc: mkrufky@linuxtv.org Cc: stoth@linuxtv.org Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17remove CONFIG_KMOD from driversJohannes Berg
Straight forward conversions to CONFIG_MODULE; many drivers include <linux/kmod.h> conditionally and then don't have any other conditional code so remove it from those. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: video4linux-list@redhat.com Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-ppp@vger.kernel.org Cc: dm-devel@redhat.com Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-10-12V4L/DVB (9116): USB: remove info() macro from usb media driversGreg Kroah-Hartman
USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. Cc: Douglas Landgraf <dougsland@gmail.com> Cc: Mike Isely <isely@pobox.com> Cc: Thierry Merle <thierry.merle@free.fr> Cc: Antoine Jacquet <royale@zerezo.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8788): v4l: replace video_get_drvdata(video_devdata(filp)) with ↵Hans Verkuil
video_drvdata(filp) Use the new video_drvdata(filp) function where it is safe to do so. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-12V4L/DVB (8613): v4l: move BKL down to the driver level.Hans Verkuil
The BKL is now moved from the video_open function in v4l2-dev.c to the various drivers. It seems about a third of the drivers already has a lock of some sort protecting the open(), another third uses video_exclusive_open (yuck!) and the last third required adding the BKL in their open function. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-07-27V4L/DVB (8523): v4l2-dev: remove unused type and type2 field from video_deviceHans Verkuil
The type and type2 fields were unused and so could be removed. Instead add a vfl_type field that contains the type of the video device. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-09-22 01:59:25 +0000