summaryrefslogtreecommitdiffstats
path: root/drivers/media/video
AgeCommit message (Collapse)Author
2007-04-27V4L/DVB (5507): Pvrusb2: Gather USB bus address info and report itMike Isely
The V4L2 API requires a unique bus_info string returned as part of the v4l2_capability structure. These changes gather up the USB address information, from the underlying device, into a string and report that out through v4l2 and via sysfs (for completeness). Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5504): Sn9c102: Make driver V4L2 not V4L1Trent Piepho
sn9c102 is a v4l2 driver, except it used a couple v4l1 helper functions. Stop using those functions and depend on V4L2 in Kconfig. Acked-by: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5503): Sn9c102: declare constant byte sequences as static constTrent Piepho
Makes sure they don't get copied onto the stack. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5502): Sn9c102: more efficient register writing codeTrent Piepho
There were many places in the driver which had long sequences of constant register initializations. These were done with one function call per register. The register address and value were immediate values in the function calls. This is very inefficient, as each register and value take twice the space when they are code, as each includes a push instruction to put it on the stack. There there is the overhead, both size and time, for a function call for each register. It's also quite a few lines of C code to do this. The patch creates a function that writes multiple registers from a list, and a macro that makes it easy to construct a such a list as a const static local to send to the function. This gets rid of quite a bit of C code, and shrinks the driver by around 8k, while at the same time being more efficient. Acked-by: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5497): Additional card support for bttv driverScott Alfter
SSAI (www.ssai.us) makes several Bt878-based capture cards that get used in our surveillance, conferencing, and medical imaging systems. The attached relatively small patch adds support for these cards, which fall into two broad * boards with one or more Bt878s, one or more composite inputs, and no S-video or tuner inputs * boards with one Bt878, one composite input, one S-video input, and no tuner input Signed-off-by: Scott Alfter <salfter@ssai.us> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5492): Remove useless includes of i2c-algo-bit.hJean Delvare
The tda7432, tda9875 and tvaudio media drivers don't need to include the linux/i2c-algo-bit.h header file. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5491): Cx88: Support the DTV1000 T analog inputsJean Delvare
Add support for the S-Video and CVBS (composite) analog video inputs of the Leadtek WinFast DTV1000 T adapter. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5490): Drivers/media/video/se401.c: check kmalloc() return value.Amit Choudhary
Check the return value of kmalloc() in function se401_start_stream(), in file drivers/media/video/se401.c. Signed-off-by: Amit Choudhary <amit2030@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5489): Codec.c: check kmalloc() return value.Amit Choudhary
Signed-off-by: Amit Choudhary <amit2030@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5488): Replace DMA magic mask for its aliasesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5486): Add support for remote of Asustech P7131 Hybrid LNAEd Vipas
This patch just defines the remote control type. Signed-off-by: Ed Vipas <epvipas@gmail.com> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5485): Tda827x: delayed probing of tuner versionHartmut Hackmann
When the tuner is attached, the tda10046 is not initilized yet, so it is searching for its firmware. If the tuner is attached to the tda10046 silent i2c port, a bus collision can occur. Now the version is probed during the first init or sleep call. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5484): Set tda8290 to analog mode after initHartmut Hackmann
Set tda8290 to analog mode after init, otherwise the tuner driver will not accept i.e. the standby command. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5482): Bttv: automatically load dvb-bt8xx for bttv cards with dvbJarod Wilson
This patch causes the bttv driver to automatically load the dvb-bt8xx module for bttv/dvb hybrid cards. Successfully tested with a pcHDTV HD-2000 card. This patch is based on the recent patches to enable autoloading of cx88-dvb, cx88-blackbird and saa7134-dvb. Signed-off-by: Jarod Wilson <jwilson@redhat.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5481): Fix audio input for AverTv Go 007Damian Minkov
Fix audio input source for capturing(playing) audio on AverTv Go 007 cards. Signed-off-by: Damian Minkov <damencho@damencho.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5480): Fix cx88_print_irqbits calls to use ARRAY_SIZEMauro Carvalho Chehab
cx88_print_irqbits were expecting a string pointer with 32 bytes. Better to pass the string size and use ARRAY_SIZE on its calls. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5479): Use ARRAY_SIZE instead of a magic numberMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5478): Use ARRAY_SIZE and a cleaner logic for initializing tunerMauro Carvalho Chehab
ATI HDTV Wonder needs to initialize some registers before allowing the tuner to start working. The current logic have lots of magic. This patch makes the code cleaner, using ARRAY_SIZE() for the initialization array and using a bidimensional array, instead of doing some stuff like: &buffer[i+2] Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5477): CodingStyle cleanups on for loops at bttv-cards.cMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5476): Fix gpiomux array sizeMauro Carvalho Chehab
there were several "magic" for loops, addressing gpiomux array size (4). Adrian Bunk showed that one of the loops were wrong, going from 0 to 4. This patch provides the right fix for this trouble, by using ARRAY_SIZE on all places where we have a for loop using gpiomux. Thanks to: Adrian Bunk <bunk@stusta.de> for pointing me about this trouble. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5474): SN9C1xx driver updatesLuca Risolia
@ Don't assume that SOF headers can't cross packets boundaries @ Fix compression quality selection + Add support for MI-0360 image sensor * Documentation updates @ Fix sysfs @ MI0343 rewritten * HV7131R color fixes and add new ABLC control * Rename the archive from "sn9c102" to "sn9c1xx" * fix typos * better support for TAS5110D @ fix OV7630 wrong colors @ Don't return an error if no input buffers are enqueued yet on VIDIOC_STREAMON * Add informations about colorspaces * More appropriate error codes in case of failure of some system calls * More precise hardware detection * Add more informations about supported hardware in the documentation + More supported devices + Add support for HV7131R image sensor Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5471): Cpia_pp.c: convert to module_{init,exit}Adrian Bunk
After looking at a section bug (in the non-modular case, clearly non-init code referenced the __initdata parport_nr[]), I thought it was time to convert this driver to module_{init,exit}. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5469): Add raw bayer support to the ov7670 driverJonathan Corbet
Add raw bayer support to the ov7670 driver Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5469a): Copyright and maintainer tweaksJonathan Corbet
Fix up Cafe/ov7670 copyrights and maintainer entries Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5468): Don't mirror ov7670 images by defaultJonathan Corbet
Don't mirror ov7670 images by default. The ov7670 sensor driver sets the mirror bit by default, which is not the desired mode. OLPC has been running with this patch for a while. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5467): Add suspend/resume support to the Cafe CCICJonathan Corbet
Add suspend/resume support to the Cafe CCIC driver. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5466): Fix up some Cafe CCIC delay issuesJonathan Corbet
Fix up unsociable Cafe CCIC delays. The Cafe CCIC driver contains some lengthy delays, some of which are unnecessary and some of which are done under lock. Some were marked with comments, but the comments somehow failed to make the issue go away. So fix it for real. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5465): Remove an obsolete PCI IDJonathan Corbet
Remove an obsolete PCI ID. The CAFE driver includes three PCI IDs, one of which corresponds to a development board which is no longer in use. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5464): Set the PCI device in the V4L2 deviceJonathan Corbet
Set the PCI dev in the V4L2 dev so that the proper sysfs link gets made Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5462): Add Logitech ViewPort AV 100Mauro Carvalho Chehab
Logitech ViewPort AV 100 has the same internals as Cisco VT Camera. Fixing Pwc driver to handle it properly. Also, fixed the comments for both cameras. Thanks to Martin Rubli for pointing me this. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5461): Pwc: cisco VT Camera supportJean Tourrilhes
I have a Cisco VT Camera, and it was just collecting dust. I decided to try connecting it to my Linux box at home. Just a disgression about the product. The Cisco VT Camera is a webcam Cisco sold to work with their IP phone hardware and software. It's mostly useless on Windows, as it interfaces only to Cisco software. You can find some for cheap on eBay... Physically, it's just a Logitech Pro 4000. The only difference with the Pro 4000 is the Cisco logo and that it's grey like the Pro 3000. I believe Cisco is now selling the Cisco VT Camera II, which look to be something else... So, assuming that it was a Pro 4000 inside, I created the little patch attached. I'm new to webcam under Linux, but I managed to get an image from it using xawtv, and the image looked all right, so I consider that a success. The imaged seemed a bit small and I could not get the microphone driver loaded, but I assume it's my lack of experience. Note that I did not try any other type_id, but this one works great. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5452): Cx88: merge identical boardsTrent Piepho
The attach code for HAUPPAUGE_HVR3000 and HAUPPAUGE_HVR1300 is exactly the same as the code used by HAUPPAUGE_HVR1100, HAUPPAUGE_HVR1100LP, and WINFAST_DTV2000H. So, those first two cards are added to the case block used by the last three. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5446): Renamed ASUStek P7131 card [1043:4876]Hartmut Hackmann
The new name fits to what it is and what is on the box. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5445): Added / corrected support for some ASUS hybrid boardsHartmut Hackmann
There are 2 new entries for p7131 boards and one correction for a board with LNA. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5444): Saa7134-dvb fix sleep function of the fmd1216 tuner.Hartmut Hackmann
Static locals should not be changed - the original contents gets lost. Thanks to Trent Piepho for pointing me to this. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5443): Saa7134: put tuner to sleep mode after board initializationHartmut Hackmann
Besides power saving, this puts the AGC output of the tda8290 to tristate. This is necessary for some hybrid boards which don't use a multiplexer for the AGC Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5438): Fix ivtv yuv threshold handlingIan Armstrong
Modifies automatic mode selection for yuv playback. Behaviour is now that source video with a vertical resolution below that of the currently set broadcast mode will be treated as progressive. Video with a vertical resolution greater or equal to the current broadcast mode (up to 576 lines) will be treated as interlaced. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5436): Fix TV output initializationHans Verkuil
The TV standard should be set AFTER the TV output is fully initialized. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5434): Updates to the tveeprom tuner, video decoder and audio chipSteven Toth
Some of the new tuner entries may need to be mapped to compatible tuners already defined. I don't know for certain which tuners are compatible between manufacturers. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5432): Cx88: whitespace cleanupMichael Krufky
replace leading spaces with tabs Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5431): Cx88: autodetect ADS Tech InstantTV DVB-SMichael Krufky
The ADS Tech InstantTV DVB-S is a clone of the KWorld DVB-S 100. This patch adds autodetection support for this card based on pci subsystem id. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5420): Initialize the inputs before registering the devices.Hans Verkuil
Once the devices have been registered anyone can start changing the inputs or TV standard before they have been initialized by the driver. This leads to cases were the input is changed in an udev rule, but after that rule is triggered the tail-end of the ivtv driver initialization can override that by selecting the tuner input. The correct sequence is to first setup the input, initial frequency and TV standard before finally registering the video devices. This prevents any udev rules from being triggered prematurely. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5417): First unregister the driver, and then free the memory.Hans Verkuil
ivtv_remove which is called by pci_unregister_driver was still using memory that was already freed. Ouch. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5416): Use pci_register_driver instead of pci_module_init in ivtv.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5414): Add missing kfree in early exit of saa7115.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5413): Use spin_lock_init to fix lockdep warnings.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5412): Fix VIDIOC_TRY_ENCODER_CMD and VIDEO_TRY_COMMANDHans Verkuil
VIDIOC_TRY_ENCODER_CMD did the same as VIDIOC_ENCODER_CMD, now it no longer touches the encoder. Both the encoder and decoder commands did not clear the flags field of unknown flags. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5411): Use v4l_printk_ioctl for debugHans Verkuil
Using v4l_printk_ioctl saves a lot of code duplication. Also moved a few ioctl cases to another function, improving the ioctl grouping. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5410): Add VIDIOC_G/S_PRIORITY support to ivtv.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-27V4L/DVB (5406): Add comment why the symbols are exported.Hans Verkuil
It is not immediately obvious why the ivtv symbols are exported in ivtv-driver.c since both ivtv-fb and the IR-blaster module are still out-of-tree, currently being ported to be in kernel. Added a comment so people are aware of these issues. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-26 20:09:01 +0000