summaryrefslogtreecommitdiffstats
path: root/drivers/media
AgeCommit message (Collapse)Author
2008-07-20V4L/DVB (8030): TDA10023: make TS output mode configurableAntti Palosaari
- make TS output mode configurable Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8024): vivi: rename MODULE_NAME macro to VIVI_MODULE_NAME to avoid ↵Mauro Carvalho Chehab
namespace conflicts Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8023): vivi: announce that it is registered as /dev/video%dCarl Karsten
Signed-off-by: Carl Karsten <carl@personnelware.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8021): Beholder's cards descriptionDmitry Belimov
Split the Beholder M6 family to different models. Because M6 hasn`t RDS, M63 has chip with AC3 codec, M6 Extra has other type of HF module. Add correct data for support MPEG encoder. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8019): New for I2S on for MPEG of saa7134_empressDmitry Belimov
Rework saa7134_enable_i2s function. Remove vendor specific data. Configure I2S output port specific for model of SAA7133/5-SAA7134. I think it is more good. Renamed definition of I2S audio output control register. It`s SAA7133/5 register Start video port after configuring procedure. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8014): gl861: coding style fixesAntti Palosaari
- coding style fixes raised by checkpatch Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8006): em28xx: Split HVR900 into two separate entriesDevin Heitmueller
- Separate the newer variant of the HVR-900 into its own device profile because it has a Micronas DRX397 instead of the Zarlink demod. This doesn't make the device work, but at least we don't try to initialize it as though it had the Zarlink device. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> [mchehab@infradead.org: avoid compilation breakage at mainstream, where drx397xD.h doesn't exist yet] Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7997): si470x: hardware frequency seek supportTobias Lorenz
This patch brings the following changes: - this now finally adds hardware frequency seek support Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7996): si470x: afc indicationTobias Lorenz
This patch brings the following changes: - afc indication: device has no indication whether freq is too low or too high therefore afc always return 1, when freq is wrong Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7995): si470x: a lot of small code cleanupsTobias Lorenz
This patch brings the following changes: - comment on how to listen to an usb audio device   (i get so many questions about that...) - code cleanup (error handling, more warnings, spacing, ...) Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7994): si470x: let si470x_get_freq return errnoTobias Lorenz
This patch brings the following changes: - version bumped to 1.0.8 for all the following patches - si470x_get_freq now returns errno Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7993): si470x: move global lock to device structureTobias Lorenz
this patch brings the following changes: - move the global disconnect lock into the device structure - code cleanup (spaces to tabs, long line splits, ...) Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7992): Add support for Pinnacle PCTV HD Pro stick (the older ↵Devin Heitmueller
variant 2304:0227) Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7988): soc_camera: missed fmt callback conversion.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7986): cx23885: add initial support for DViCO FusionHDTV7 Dual ExpressMichael Krufky
Only one frontend is enabled right now. The second frontend can lock, but transport doesn't work yet. The device will be supported as a single tuner device until the second frontend is working. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7984): tda18271: update filename in commentsMichael Krufky
This file was renamed but we forgot to change it in the comments. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7976): I2S on for MPEG of saa7134_empressDmitri Belimov
Rework saa7134_enable_i2s function. Add vendor specific data. Add definition for I2S audio output control register. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7952): AU6610: various cosmetic changesAntti Palosaari
- update license comments - change MODULE_DESCRIPTION from device specific to chipset specific - correct debug switch from deb_rc to deb_info - correct MPEG2 stream interval from 1.25 to 1 - change frontend_attach error code from -EIO to -ENODEV Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7951): AU6610: remove useless identify_stateAntti Palosaari
- remove useless identify_state - device is always warm Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7950): AU6610: coding style fixesAntti Palosaari
- coding style fixes raised by checkpatch Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7949): videodev: renamed the vidioc_*_fmt_* callbacksHans Verkuil
The naming for the callbacks that handle the VIDIOC_ENUM_FMT and VIDIOC_S/G/TRY_FMT ioctls was very confusing. Renamed it to match the v4l2_buf_type name. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7948): videodev: add missing vidioc_try_fmt_sliced_vbi_output and ↵Hans Verkuil
VIDIOC_ENUMOUTPUT handling There was no vidioc_try_fmt_sliced_vbi_output, instead vidioc_try_fmt_vbi_output was reused. The VIDIOC_ENUMOUTPUT handling was missing altogether, even though the callback existed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7947): videodev: add vidioc_g_std callback.Hans Verkuil
The default videodev behavior for VIDIOC_G_STD is not correct for all devices. Add a new callback that drivers can use instead. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7946): videodev: small fixes for VIDIOC_G_FREQUENCY and VIDIOC_G_FMTHans Verkuil
__video_do_ioctl incorrectly zeroed the tuner field of v4l2_frequency and did not zero the full fmt union of v4l2_format. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7942): Hardware frequency seek ioctl interfaceTobias Lorenz
Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7939): pvrusb2: Remove sysfs interface hackeryMike Isely
Back in the early days of the pvrusb2 driver, the kernel class mechanism in use for the sysfs interface had no means to pass per-attribute information to the show / store functions. This forced me to implement a horrible ugly thunking mechanism (i.e. infer the missing data through the use of dedicated cookie cutter bounce functions). However now we're using a better mechanism which also passes enough additional information to the show / store functions that we no longer need the hack. So eliminate all the crap. Yay! Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7938): pvrusb2: Increase enforced encoder wait delay to improve ↵Mike Isely
reliability The driver enforces a "quiet period" on the encoder in certain situations before attempting to operate it. This seems to help avoid video encoding errors / corruption. The quiet period was 50msec, but through experimentation it has been observed to improve further if the interval is increased to 100msec. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7937): pvrusb2: Change several embedded timer constants to defined ↵Mike Isely
values This is primarily a cosmetic change to make it easier to change some of the time constants used in the driver. Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7936): pvrusb2: Remove svn Id keyword from all sourcesMike Isely
Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7927): ivtv: simplify gpio initialization for XCeive tuners.Hans Verkuil
Separate gpio_init field and xceive_pin and combine the two when the gpio is initialized. So there is no longer any need to set the xceive pin in the gpio_init values, simplifying the creation of a new card definition. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7926): ivtv: add support for the Buffalo PC-MV5L/PCI card.Hans Verkuil
Thanks to Peter Brandt for doing the necessary tests to fill out the card definition! Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7924): ivtv/cx18: snprintf fixesJean Delvare
snprinf() takes the trailing \0 into account in its length calculations, so there is no need to subtract 1 to the buffer size. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7921): s5h1411.c shouldn't #include "dvb-pll.h"Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7920): s5h1409.c shouldn't #include "dvb-pll.h"Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7917): au8522.c shouldn't #include "dvb-pll.h"Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7914): Anysee: driver for Anysee DVB-T/C receiverAntti Palosaari
- driver for Anysee DVB-T/C receiver Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7913): DVB-PLL: add Samsung DTOS403IH102A tunerAntti Palosaari
- add Samsung DTOS403IH102A tuner Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7912): TDA10023: make few parameters configurableAntti Palosaari
- separate TDA10021 and TDA10023 attach - configurable Xtal settings - configurable input freq offset + baseband conversion type settings Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7897): TCM825x: Include invertation of image mirroring in configurationSakari Ailus
Add invertation of image mirroring register bits to default configuration. This is useful when the camera module is e.g. mounted upside down. Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7886): ivtvfb: Use DMA for write()Ian Armstrong
write() operations to the ivtv framebuffer will now attempt to use DMA if the amount of data to copy is >= 4096 bytes. This change effectively depreciates the need for the proprietary IVTVFB_IOC_DMA_FRAME ioctl since a write() of sufficient size will do the same thing. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7883): pvrusb2: make default frequency configurable via modprobe optionMichael Krufky
The pvrusb2 driver initially sets the tuner to known broadcast frequencies in the Chicago area, to ease driver testing for the maintainer. This patch keeps those default frequencies, but allows them to be altered via modprobe option. This allows the same ease and convenience for testing multiple pvrusb2 devices one after another under other conditions and areas. For instance, the default initial frequency, 175.25 MHz, might not necessarily be valid on all cable television networks, but usually will be a valid NTSC broadcast channel. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7882): pvrusb2: make code staticAdrian Bunk
This patch makes the following needlessly global code static: - pvrusb2-devattr.c: struct pvr2_onair_creator_fe_props - pvrusb2-devattr.c: struct pvr2_onair_usb2_fe_props - pvrusb2-devattr.c: struct pvr2_73xxx_dvb_props - pvrusb2-devattr.c: struct pvr2_750xx_dvb_props - pvrusb2-devattr.c: struct pvr2_751xx_dvb_props - pvrusb2-hdw.c:pvr2_led_ctrl_hauppauge() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (7586): radio: use get/put_unaligned_* helpersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-14Merge branch 'for-2.6.27' of git://git.infradead.org/users/dwmw2/firmware-2.6Linus Torvalds
* 'for-2.6.27' of git://git.infradead.org/users/dwmw2/firmware-2.6: (64 commits) firmware: convert sb16_csp driver to use firmware loader exclusively dsp56k: use request_firmware edgeport-ti: use request_firmware() edgeport: use request_firmware() vicam: use request_firmware() dabusb: use request_firmware() cpia2: use request_firmware() ip2: use request_firmware() firmware: convert Ambassador ATM driver to request_firmware() whiteheat: use request_firmware() ti_usb_3410_5052: use request_firmware() emi62: use request_firmware() emi26: use request_firmware() keyspan_pda: use request_firmware() keyspan: use request_firmware() ttusb-budget: use request_firmware() kaweth: use request_firmware() smctr: use request_firmware() firmware: convert ymfpci driver to use firmware loader exclusively firmware: convert maestro3 driver to use firmware loader exclusively ... Fix up trivial conflicts with BKL removal in drivers/char/dsp56k.c and drivers/char/ip2/ip2main.c manually.
2008-07-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.gitDavid Woodhouse
Conflicts: sound/pci/Kconfig
2008-07-14vicam: use request_firmware()Jaswinder Singh
Although it wasn't actually using ihex records before, we use the Intel HEX record format for this firmware -- because that gives us a simple way to split it into separate chunks internally as we need, without loading each part as a separate file. Signed-off-by: Jaswinder Singh <jaswinder@infradead.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-14dabusb: use request_firmware()David Woodhouse
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-14cpia2: use request_firmware()David Woodhouse
Thanks for Jaswinder Singh for converting the firmware blob itself to ihex. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-14Merge commit 'v2.6.26' into bkl-removalJonathan Corbet
2008-07-12ov7670: clean up ov7670_read semanticsAndres Salomon
Cortland Setlow pointed out a bug in ov7670.c where the result from ov7670_read() was just being checked for !0, rather than <0. This made me realize that ov7670_read's semantics were rather confusing; it both fills in 'value' with the result, and returns it. This is goes against general kernel convention; so rather than fixing callers, let's fix the function. This makes ov7670_read return <0 in the case of an error, and 0 upon success. Thus, code like: res = ov7670_read(...); if (!res) goto error; ..will work properly. Signed-off-by: Cortland Setlow <csetlow@tower-research.com> Signed-off-by: Andres Salomon <dilinger@debian.org> Acked-by: Jonathan Corbet <corbet@lwn.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-01-02 17:49:52 +0000