summaryrefslogtreecommitdiffstats
path: root/drivers/mfd/Kconfig
AgeCommit message (Collapse)Author
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (26 commits) mmc: SDHI should depend on SUPERH || ARCH_SHMOBILE mmc: tmio_mmc: Move some defines into a shared header mmc: tmio: support aggressive clock gating mmc: tmio: fix power-mode interpretation mmc: tmio: remove work-around for unmasked SDIO interrupts sh: fix SDHI IO address-range ARM: mach-shmobile: fix SDHI IO address-range mmc: tmio: only access registers above 0xff, if available mfd: remove now redundant sh_mobile_sdhi.h header sh: convert boards to use linux/mmc/sh_mobile_sdhi.h ARM: mach-shmobile: convert boards to use linux/mmc/sh_mobile_sdhi.h mmc: tmio: convert the SDHI MMC driver from MFD to a platform driver sh: ecovec: use the CONFIG_MMC_TMIO symbols instead of MFD mmc: tmio: split core functionality, DMA and MFD glue mmc: tmio: use PIO for short transfers mmc: tmio-mmc: Improve DMA stability on sh-mobile mmc: fix mmc_app_send_scr() for dma transfer mmc: sdhci-esdhc: enable esdhc on imx53 mmc: sdhci-esdhc: use writel/readl as general APIs mmc: sdhci: add the abort CMDTYPE bits definition ...
2011-03-28MFD: allow cs5535-mfd to build on X86 onlyAndres Salomon
Stephen ran into the following build error: drivers/mfd/cs5535-mfd.c:30:22: error: asm/olpc.h: No such file or directory olpc.h exists only on x86 (and in the future, ARM). Rather than wrapping the include in an #ifdef, just change cs5535-mfd to only build on x86. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-27mfd: Select MFD_CORE if TPS6105X driver is configuredGuenter Roeck
The TPS61050/61052 driver uses MFD core code, yet does not specify the dependency in Kconfig. If it is the only MFD driver configured, compilation fails with ERROR: "mfd_add_devices" [drivers/mfd/tps6105x.ko] undefined! ERROR: "mfd_remove_devices" [drivers/mfd/tps6105x.ko] undefined! Fix the problem by adding "select MFD_CORE" to the respective Kconfig entry. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-25mmc: tmio: convert the SDHI MMC driver from MFD to a platform driverGuennadi Liakhovetski
On sh-mobile platforms the SDHI driver was using the tmio_mmc SD/SDIO MFD cell driver. Now that the tmio_mmc driver has been split into a core and a separate MFD glue, we can support SDHI natively without the need to emulate an MFD controller. This also allows to support systems with an on-SoC SDHI controller and a separate MFD with a TMIO core. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-24Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (442 commits) [media] videobuf2-dma-contig: make cookie() return a pointer to dma_addr_t [media] sh_mobile_ceu_camera: Do not call vb2's mem_ops directly [media] V4L: soc-camera: explicitly require V4L2_BUF_TYPE_VIDEO_CAPTURE [media] v4l: soc-camera: Store negotiated buffer settings [media] rc: interim support for 32-bit NEC-ish scancodes [media] mceusb: topseed 0x0011 needs gen3 init for tx to work [media] lirc_zilog: error out if buffer read bytes != chunk size [media] lirc: silence some compile warnings [media] hdpvr: use same polling interval as other OS [media] ir-kbd-i2c: pass device code w/key in hauppauge case [media] rc/keymaps: Remove the obsolete rc-rc5-tv keymap [media] remove the old RC_MAP_HAUPPAUGE_NEW RC map [media] rc/keymaps: Rename Hauppauge table as rc-hauppauge [media] rc-rc5-hauppauge-new: Fix Hauppauge Grey mapping [media] rc-rc5-hauppauge-new: Add support for the old Black RC [media] rc-rc5-hauppauge-new: Add the old control to the table [media] rc-winfast: Fix the keycode tables [media] a800: Fix a few wrong IR key assignments [media] opera1: Use multimedia keys instead of an app-specific mapping [media] dw2102: Use multimedia keys instead of an app-specific mapping ... Fix up trivial conflicts (remove/modify and some real conflicts) in: arch/arm/mach-omap2/devices.c drivers/staging/Kconfig drivers/staging/Makefile drivers/staging/dabusb/dabusb.c drivers/staging/dabusb/dabusb.h drivers/staging/easycap/easycap_ioctl.c drivers/staging/usbvideo/usbvideo.c drivers/staging/usbvideo/vicam.c
2011-03-23regulator: Add a subdriver for TI TPS6105x regulator portions v2Linus Walleij
This adds a subdriver for the regulator found inside the TPS61050 and TPS61052 chips. Cc: Samuel Ortiz <samuel.ortiz@intel.com> Cc: Ola Lilja <ola.o.lilja@stericsson.com> Cc: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Add a core driver for TI TPS61050/TPS61052 chips v2Linus Walleij
The TPS61050/TPS61052 are boost converters, LED drivers, LED flash drivers and a simple GPIO pin chips. Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Jonas Aberg <jonas.aberg@stericsson.com> Cc: Ola Lilja <ola.o.lilja@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Fix MAX8997 Kconfig entry typosRandy Dunlap
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: MAX8997/8966 supportMyungJoo Ham
MAX8997/MAX8966 chip is a multi-function device with I2C bussses. The chip includes PMIC, RTC, Fuel Gauge, MUIC, Haptic, Flash control, and Battery (charging) control. This patch is an initial release of a MAX8997/8966 driver that supports to enable the chip with its primary I2C bus that connects every device mentioned above except for Fuel Gauge, which uses another I2C bus. The fuel gauge is not supported by this mfd driver and is supported by a seperated driver of MAX17042 Fuel Gauge (yes, the fuel gauge part is compatible with MAX17042). Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Add twl4030 madc driverKeerthy
Introducing a driver for MADC on TWL4030 powerIC. MADC stands for monitoring ADC. This driver monitors the real time conversion of analog signals like battery temperature, battery cuurent etc. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: Add new ab8500 GPADC driverArun Murthy
AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage Signed-off-by: Arun Murthy <arun.murthy@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-21[media] MFD: WL1273 FM Radio: MFD driver for the FM radioMatti Aaltonen
This is the core of the WL1273 FM radio driver, it connects the two child modules. The two child drivers are drivers/media/radio/radio-wl1273.c and sound/soc/codecs/wl1273.c. The radio-wl1273 driver implements the V4L2 interface and communicates with the device. The ALSA codec offers digital audio, without it only analog audio is available. Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-17Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits) davinci: DM644x EVM: register MUSB device earlier davinci: add spi devices on tnetv107x evm davinci: add ssp config for tnetv107x evm board davinci: add tnetv107x ssp platform device spi: add ti-ssp spi master driver mfd: add driver for sequencer serial port ARM: EXYNOS4: Implement Clock gating for System MMU ARM: EXYNOS4: Enhancement of System MMU driver ARM: EXYNOS4: Add support for gpio interrupts ARM: S5P: Add function to register gpio interrupt bank data ARM: S5P: Cleanup S5P gpio interrupt code ARM: EXYNOS4: Add missing GPYx banks ARM: S3C64XX: Fix section mismatch from cpufreq init ARM: EXYNOS4: Add keypad device to the SMDKV310 ARM: EXYNOS4: Update clocks for keypad ARM: EXYNOS4: Update keypad base address ARM: EXYNOS4: Add keypad device helpers ARM: EXYNOS4: Add support for SATA on ARMLEX4210 plat-nomadik: make GPIO interrupts work with cpuidle ApSleep mach-u300: define a dummy filter function for coh901318 ... Fix up various conflicts in - arch/arm/mach-exynos4/cpufreq.c - arch/arm/mach-mxs/gpio.c - drivers/net/Kconfig - drivers/tty/serial/Kconfig - drivers/tty/serial/Makefile - drivers/usb/gadget/fsl_mxc_udc.c - drivers/video/Kconfig
2011-03-15mfd: add driver for sequencer serial portCyril Chemparathy
TI's sequencer serial port (TI-SSP) is a jack-of-all-trades type of serial port device. It has a built-in programmable execution engine that can be programmed to operate as almost any serial bus (I2C, SPI, EasyScale, and others). This patch adds a driver for this controller device. The driver does not expose a user-land interface. Protocol drivers built on top of this layer are expected to remain in-kernel. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-01usb: host: omap: common usb host core driverKeshava Munegowda
enabling and disabling the common clocks for ehci and ohci is implemented. usbhs is a common parent platform driver for EHCI and OHCI driver. This driver receives the clock enable and disable requests from ehci and ohci drivers.The UHH and TLL initialization is also performed. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-01-14mfd/ab8500: remove spi supportSundar Iyer
Since the Ab8500 v1.0, the SPI support is deprecated on the HW. Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: Remove ARCH_U8500 dependency from AB8500Mark Brown
While it is vanishingly unlikely that the device will be deployed on other architectures removing the dependency facilitates build testing when doing generic work on both the MFD core for the device and the subsystem drivers. There appears to be no actual code dependency. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: Add cs5535-mfd driver for AMD Geode's CS5535/CS5536 supportAndres Salomon
Add an MFD driver to handle the ISA device on CS5535 and CS5536 southbridges. This ISA bridge is actually multiple devices: GPIOs, MFGPTs, etc. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-06Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (255 commits) [media] radio-aimslab.c: Fix gcc 4.5+ bug [media] cx25821: Fix compilation breakage due to BKL dependency [media] v4l2-compat-ioctl32: fix compile warning [media] zoran: fix compiler warning [media] tda18218: fix compile warning [media] ngene: fix compile warning [media] DVB: IR support for TechnoTrend CT-3650 [media] cx23885, cimax2.c: Fix case of two CAM insertion irq [media] ir-nec-decoder: fix repeat key issue [media] staging: se401 depends on USB [media] staging: usbvideo/vicam depends on USB [media] soc_camera: Add the ability to bind regulators to soc_camedra devices [media] V4L2: Add a v4l2-subdev (soc-camera) driver for OmniVision OV2640 sensor [media] v4l: soc-camera: switch to .unlocked_ioctl [media] v4l: ov772x: simplify pointer dereference [media] ov9640: fix OmniVision OV9640 sensor driver's priv data retrieving [media] ov9640: use macro to request OmniVision OV9640 sensor private data [media] ivtv-i2c: Fix two warnings [media] staging/lirc: Update lirc TODO files [media] cx88: Remove the obsolete i2c_adapter.id field ...
2010-12-29[media] MFD: WL1273 FM Radio: MFD driver for the FM radioMatti Aaltonen
This is the core of the WL1273 FM radio driver, it connects the two child modules. The two child drivers are drivers/media/radio/radio-wl1273.c and sound/soc/codecs/wl1273.c. The radio-wl1273 driver implements the V4L2 interface and communicates with the device. The ALSA codec offers digital audio, without it only analog audio is available. Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-19mfd/tc35892: rename tc35892 core driver to tc3589xSundar Iyer
Rename the tc35892 core/gpio drivers to tc3589x to include new variants in the same mfd core Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-10-29mfd: Add WM831x SPI supportMark Brown
Implement support for controlling WM831x and WM832x devices using SPI. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: Factor out WM831x I2C I/O from the core driverMark Brown
In preparation for the addition of SPI support for the WM831x move the I2C specific code into a separate file with a separate Kconfig option so the I2C support can be excluded from the build. Also update the 1133-EV1 PMIC module support for SMDK6410 to use the new symbol. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: Add mc13892 support to mc13xxxUwe Kleine-König
mc13892 is the companion PMIC for Freescale's i.MX51. It's similar enough to mc13782 to support it in a single driver. This patch introduces enough compatibility cruft to keep all users of the superseded mc13783 driver unchanged. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: Add VIA VX855 multi-function device supportDaniel Drake
This device has GPIO, SPI and I2C capabilities. The hardware can be found in the OLPC XO-1.5 laptop. Based on earlier work by Harald Welte. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: msp430 expects I2C to be built-inSamuel Ortiz
msp430 being a bool, it will only work with I2C=y Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: Update kconfig for ab8500 core driverArun Murthy
This patch add a dependancy for ab8500-core driver so as to depend on u8500 platform. This patch also fixes the build issues(powerpc_allyesconfig) for the patch 03f582a93ecca6e9584b622570022abf08ed03ec (misc: Add ab8500 pwm driver) Signed-off-by: Arun Murthy <arun.murthy@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: Add basic tps6586x interrupt supportGary King
Add support for enabling and disabling tps6586x subdevice interrupts Signed-off-by: Gary King <gking@nvidia.com> Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: AB8500 register access via PRCMU I2CMattias Wallin
This patch adds the choice of accessing the AB8500 registers via prcmu I2C. Access either via SPI or I2C is supported. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: AB8500 debugfsMattias Wallin
This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: Align ab8500 with the abx500 interfaceMattias Wallin
This patch makes the ab8500 mixed signal chip expose the same interface for register access as the ab3100, ab3550 and ab5500 chip. The ab8500_read() and ab8500_write() is removed and replaced with abx500_get_register_interruptible() and abx500_set_register_interruptible(). Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: Add MAX8998 interrupts supportJoonyoung Shim
Use genirq and provide seperated file for interrupts support. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: LP3974 PMIC supportKyungmin Park
LP3974 PMIC support. It has same functionality as max8998. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: Switch AB3100 to use MFD cellsLinus Walleij
This switches the AB3100 core driver to using MFD cells for subdevices instead of spawning common platform devices. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (22 commits) regulator: Remove default DEBUG define from TPS6586x regulator: tps6507x - add missing platform_set_drvdata in tps6507x_pmic_probe regulator: tps6586x - add regulator_unregister() in tps6586x_regulator_remove() mfd: max8998 - fix incorrect kfree(i2c) in i2c_driver probe callback handler regulator: lp3971 - remove unnecessary ret value checking in lp3971_i2c_write() regulator: max8660 - fix a memory leak in max8660_remove() regulator: max1586 - fix a memory leak in max1586_pmic_remove() regulator: Default GPIO controlled WM8994 regulators to disabled regulator: lp3971 - remove unnecessary ret value checking in lp3971_i2c_write() max8998: fix off-by-one value range checking regulator: tps6586x: fix millivolt return values and SM2 table regulator: tps6586x: add dependancy on MFD_TPS6585x regulator: add TPS6586X regulator driver regulator: MAX8998: set_voltage bugfix. ramp_up delay and min/max voltage regulator: add support for regulators on the ab8500 MFD ab8500-mfd: add regulator support to ab8500 mfd device tps65023: Allow registering similar TPS65021 drivers: regulators: depend on MFD_MAX8998 drivers: regulator: add Maxim 8998 driver ISL6271A voltage regulator support. ...
2010-08-12mfd: Add TPS6586x driverMike Rapoport
Add mfd core driver for TPS6586x PMICs family. The driver provides I/O access for the sub-device drivers and performs regstration of the sub-devices based on the platform requirements. In addition it implements GPIOlib interface for the chip GPIOs. TODO: - add interrupt support - add platform data for PWM, backlight leds and charger Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: Add support for TWL6030 PWMHemanth V
TWL6030 supports PWM (Pulse Width Modulator) which is used to control charging LED. PWM allows for controlling brightness. This patch implements the APIs required by leds-pwm driver. Signed-off-by: Hemanth V <hemanthv@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: Add JZ4740 ADC driverLars-Peter Clausen
This patch adds a MFD driver for the JZ4740 ADC unit. The driver is used to demultiplex IRQs and synchronize access to shared registers between the battery, hwmon and (future) touchscreen driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: Add STMPE I/O Expander supportRabin Vincent
Add support for the STMPE family of I/O Expanders from STMicroelectronics. These devices include upto 24 gpios and a varying selection of blocks, including PWM, keypad, and touchscreen controllers. This patch adds the MFD core. [l.fu@pengutronix.de: fix stmpe811 enable hook] [l.fu@pengutronix.de: add touchscreen platform data] Acked-by: Luotao Fu <l.fu@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-12mfd: More verbose MFD Kconfig entrySamuel Ortiz
For people to be able to intellingibly decide if they want to enable MFD drivers or not, we have to give them a much better description of what they are.
2010-08-11drivers: regulator: add Maxim 8998 driverKyungmin Park
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> This patch adds voltage regulator driver for Maxim 8998 chip. This chip is used on Samsung Aquila and GONI boards and provides following functionalities: - 4 BUCK voltage converters, 17 LDO power regulators and 5 other power controllers - battery charger This patch adds basic driver for voltage regulators and MAX 8998 MFD core. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-05-28mfd: New AB8500 driverRabin Vincent
Add a new driver to support the AB8500 Power Management chip, replacing the current AB4500. The new driver replaces the old one, instead of an incremental modification, because this is a substantial overhaul including: - Split of the driver into -core and -spi portions, to allow another interface layer to be added - Addition of interrupt support - Switch to MFD core API for handling subdevices - Simplification of the APIs to remove a redundant block parameter - Rename of the APIs and macros from ab4500_* to ab8500_* - Rename of the files from ab4500* to ab8500* - Change of the driver name from ab4500 to ab8500 Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28mfd: Use menuconfig for quicker config editingRandy Dunlap
Change MFD 'menu' to 'menuconfig' to facilitate easy (one-click) disabling of all MFD drivers. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28mfd: AB3550 core driverMattias Wallin
This adds a core driver for the AB3550 mixed-signal circuit found in the ST-Ericsson U300 platforms. This driver is a singleton proxy for all access to the AB3550 sub functionality drivers which can be added on top of this one: RTC, regulators, battery and system power control, vibrator, LEDs and an ALSA codec. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28mfd: AB3100 register access change to abx500 APIMattias Wallin
The interface for the AB3100 is changed to make way for the ABX500 family of chips: AB3550, AB5500 and future ST-Ericsson Analog Baseband chips. The register access functions are moved out to a separate struct abx500_ops. In this way the interface is moved from the implementation and the sub functionality drivers can keep their interface intact when chip infrastructure and communication mechanisms changes. We also define the AB3550 device IDs and the AB3550 platform data struct and convert the catenated 32bit event to an array of 3 x 8bits. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28mfd: Add Toshiba's TC35892 MFD coreRabin Vincent
The TC35892 I/O Expander provides 24 GPIOs, a keypad controller, timers, and a rotator wheel interface. This patch adds the MFD core. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28mfd: Add TPS6507x supportTodd Fischer
TPS6507x are multi function (PM, touchscreen) chipsets from TI. This commit also changes the corresponding regulator driver from being standalone to an MFD subdevice. Signed-off-by: Todd Fischer <todd.fischer@ridgerun.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28mfd: Janz CMOD-IO PCI MODULbus Carrier Board supportIra W. Snyder
The Janz CMOD-IO PCI MODULbus carrier board is a PCI to MODULbus bridge, which may host many different types of MODULbus daughterboards, including CAN and GPIO controllers. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Reviewed-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28mfd: Add support for the RDC321x southbridgeFlorian Fainelli
This patch adds a new MFD driver for the RDC321x southbridge. This southbridge is always present in the RDC321x System-on-a-Chip and provides access to some GPIOs as well as a watchdog. Access to these two functions is done using the southbridge PCI device configuration space. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-19 14:58:22 +0000